Educational and Research Institute Boards / Undertakings / PSU Closing in 30 days TDR #58645096

Tender For Construction Of Permanent Building For Government Arts And Science College At K.V.Kuppam In Vellore District.

Issued by Boards / Undertakings / PSU · Vellore, Tamil Nadu
Tender Value
17.19 Crore
Estimated cost
Bid Submission
21 Dec 2026
30 days left
EMD
8.70 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Permanent Building For Government Arts And Science College At K.V.Kuppam In Vellore District.

BOQ

Name of Work:- Construction of Permanent Building for Government Arts and Science College at K.V.Kuppam in Vellore District.
Sl. No. Item Description
1Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.Data worked out for 48 m3 per day/8 hrs.
2Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. A). Upto 2.40m Depth.Data worked out for 64 m3 per day/8 hrs.
3Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammed with surface vibrator, watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.
4Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
5Supplying and filling in foundation, basement, etc with filling Crushed stone Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
6Supplying and filling 40mm gauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
7Supplying and filling 20mm gauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
8Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means
9Providing Anti – termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 part I to IV in stage to suit the progress of work consist as per the detailed specification as below (Measurements taken for the plinth area for the purpose of payment) including braking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport & storing etc., complete and as directed by the departmental officers.(The chemical should be got approved by Executive Engineer before use on work).Stage -1 : Spraying Anti –termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation.Stage-2 : Spraying Anti –termite chemical solution to the grade beam level, spraying has to done for to grade beam brick masonry contact with the back fill earth. Stage-3 : Spraying Anti –termite chemical solution on the sand for the flooring before laying the flooring concrete. This treatment has to be carried out and sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring throughout.Stage -4 : Spraying Anti –termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be close after the treatment.
10Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
11For Foundation and Basement
12For Super structure in Ground Floor
13For Super structure in First Floor
14For Super structure in Second Floor
15For Super structure in Third Floor
16Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.
1750mm thick
1875mm thick
19Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)
20For Foundation and Basement
21For Super structure in Ground Floor
22For Super structure in First Floor
23For Super structure in Second Floor
24For Super structure in Third Floor
25Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means
26For Foundation and Basement
27Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
28For super structure First floor
29For super structure second floor
30Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener , side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
31Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
32Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
33Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
34Supplying and erecting Centering for Curved RCC Slab surface upto 3.60m height
35Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical upport @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid)
36Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.In Cement Mortar 1:6
37For Super structure in Ground Floor
38For Super structure in First Floor
39For Super structure in Second Floor
40For Super structure in Third Floor
41Brick work in Cement Mortar 1:5 using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.For Foundation and Basement
42Brick work in Cement Mortar 1:3 using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.
43For Foundation and Basement
44Damp proof course as per IS 3067:1988 with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality Integral liquid water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used , finishing and curing etc. complete complying with standard specification - Manual Mixing
45Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
46For Superstructure in Ground Floor
47First floor
48second floor
49Supplying and fixing fine polished cuddapah slab of 38/40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers
50Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
51Stucco plastering 12mm thick using blue granite chips of size 10mm and below over the existing base plastering with cement mortar 1:5, 12mm thick, etc., complete complying with standard specifications (SI 314) neat and finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.
52Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
53Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers.
54Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
55Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
56Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).
57Finishing the top of roof with one course of machine pressed tiles of following size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
58Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers
59160mm diameters of PVC rain water down fall pipes
60110mm diameters of PVC rain water down fall pipes
61Paving the flooring with New FULL BODY Vitrified Tiles of approved quality and colour of size 1200 x 600 x 10mm for flooring in all floors over a base layer of cement mortar 1:3 (one cement and three CS sand) 20mm thick and pointing with white cement using 0.30kg/m2 of white cement including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing as directed by the Departmental officers including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the Departmental officers. (The tiles should be got approved by the Departmental officers before use on works).
62Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.
63Paving the flooring with New Tac tile surface of approved quality and colour of size 305 x 305 x 15mm for flooring in all floors over a base layer of cement mortar 1:3 (one cement and three CS sand) 20mm thick and pointing with white cement using 0.30kg/m2 of white cement including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing as directed by the Departmental officers including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the Departmental officers. (The tiles should be got approved by the Departmental officers before use on works).
64Paving the floor with Cement based Hydraulically pressed Anti skid tiles (pattern design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three CS sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
65Paving the floor with best approved quality Flammed steel grey granite slab 1200mm x 600mm, 16mm to 18mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
66Labour charge for finishing the top of working table and staircase step portion with Double nosing arrangements
67Paving the flooring with colour design ceramic tiles of approved quality and colour of size 305 x 305 x 6mm for flooring in all floors over a base layer of cement mortar 1:3 (one cement and three CS sand) 20mm thick and pointing with white cement using 0.30kg/m2 of white cement including adding suitable colour pigments to suit the colour of tiles finishing perfectly and curing as directed by the Departmental officers including cost of tiles, all materials and incidential charges, transportation charges and labour charges for laying tiles etc., complete complying with standard specification and as directed by the Departmental officers . (The tiles should be got approved by the Departmental officers before use on works).
68Dadooing the walls with colour glazed tiles of size 300mmx 450mmx 8mm of approved quality set in cement mortar 1:2 mix (one cement & two CS sand) 10mm thick and pointing with same coloured cement using 0.40kg/m2 including finishing the joints neatly finish in the surface etc.,complete complaying with standard specifications. (The tiles used on the works should be got approved by Executive Engineer before use on the work).
69Suplying and fixing of PVC Trim Corner Beeding of size 25 x 75mm with groove to sheet ceramic tiles at corner of wall function etc., for all tile works.
70Finishing the top of flooring with granolithic floor finish of following thickness with plain cement concrete of mix 1:2:4 (One cement, two CS sand and four aggregate) using 20mm / 10 to 12mm ISS gauge hard broken granite stone including finishing the top smooth and forming thread lining and curing etc., complete complying with standard specification and as directed by the Departmental officers- 20mm thick
71supplying and fixing of Hollow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of hold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification and as directed by the departmental officers.
72Supplying and fixing in postion of 35mm thick solid core flush door shutters (single leaf) with TW ply on both sides and with TW lipping of size 35x12mm on all edges with necessary adhesives and C.P. Screws Alu. Butt Hinges (3 nos. 250 x 16 mm Size) Alu. Aldrop1 No. 250 x 16 mm Size, Alu. Tower Bolt 1 No. 250 x12 mm size, alu. Tower Bolt 1 No. 200 x 12 mm size, D type alu. Handle 200mm length 1 No., alu. door stopper with rubber bush 1 No. shall be provided, as directed by the departmental officers etc., complete.
73Supplying and fixing in postion of 35mm thick solid core flush door shutters (double leaf) with TW ply on both sides and with TW lipping of size 35x12mm on all edges with necessary adhesives and C.P. Screws. Alu. Butt Hinges (6 nos. 250 x 16 mm Size), Alu. Aldrop 1 No. 250 x 16 mm Size, Alu. Tower Bolt 2 No. 250 x12 mm size, alu. Tower Bolt, 1 No. 200 x 12 mm size, D type alu. Handle 2 Nos, 2 Nos. of 200mm length alu. door stopper with rubber bush shall be provided, as directed by the departmental officers etc., complete.
74Supply and installation of Three-track sliding UPVC Windows shall utilize uPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 112mm x 52mm x 112mm, a shutter of 66mm x 42mm x 50mm, an interlock of 45mm x 36mm, and a glazing bead of 24.5mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, wherever required, with a 1mm thick GI steel section. Each window is to be equipped with various security devices, such as touch locks or crescent locks, along with nylon rollers and an aluminium track for smooth operation, all supplied as per requirements, compliant with relevant specifications, and as directed by departmental personnel. The windows shall incorporate 5mm thick Plain or Pinhead glass, held securely by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash are to be mitred cut and fusion welded without any mechanical joints, with all welded joints neatly trimmed and finished with a grooved nib to ensure the final products are free from sharp edges. The complete window units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant will be applied to fill the gap between the wall and window frame for a leak-proof installation and complete finish etc., Complete and as directed by the department officers.
75Supplying and fixing UPVC (un-plasticized polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. the EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Rediations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loos. The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.
76Manufacturing, Supply and Fixing of steel doors Single leaf of size 1.2mx2.1m with following specification. MS angles of size 40x40x 6mm at 3.5 kg/m used for the outer frame and MS angles of size 35x35x5mm at 2.60 kg/m for the shutter frames. Stiffners with 32x6mm at 1.50 Kg/m. MS flat is provided as the lock rail of the door and welded infact of both ends to the shutter frame, 18 gauge CR sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50 Kg / RM and MS flat on the rear side of the door sandwitching the CR sheet for rigidity with locking rail and bottom tie arrangements. Additional stiffners with 18x5 mm at 0.7 kg/m MS flats are provided horizontally diagonally on the rear side of the shutter. 2Nos of hinges in case of single leaf and 4Nos of hinges in case double leaf shutter is provided 6 Nos of hold fasts 200 length 40x40x6mm M.S. angle spliced at the ends are welded to the outer frame of the door. M.S Tower bolt 2 Nos. one at top and the other at bottom are provided. One aldrop is provided incase of double leaves door at lock rail section in the door. For single leaf doors, one more aldrop is provided in the inner side at the lock rail section of the door. One rotating locking arrangements at the inner side of the door and additional provision for locking arrangements for lock is provided with 32x6mm MS flat on the rear side of the door at an appropriate place incase of a double leaves door MS flat 32x6mm at 1.50 kg/m is provided on the edge of one shutter to conceal the gap between the shutters. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given a shop coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials labour charges transportation taxes and all other incidental charges etc., complete. Single leaf.
77Supplying & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550KG/Cub.MT & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer-in-Charge of the department. The WPC door shall be fixed the door shall have 2 Hooks in SS, 2 Handles 4\\" in SS (Openable) etc., complete and as directed by the departmental officers.
78Supplying & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550KG/Cub.MT & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer-in-Charge of the department. The WPC door shall be fixed onto the Aluminium \\"G\\" type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4\\" in SS (Sliding Door) etc., complete and as directed by the departmental officers.
79Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered ventilators of from the profile the size of outer frame 60mm x58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work (All items rate sl. no 270).
80Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
81Supplying and fixing of approved M.S Grills for doors,windows,open courtyard, grill gate etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.
82Supply and fixing of Terracotta Jally of size 20 X 20 X 8cm of approved pattern including pointing finishing to the true alignment, curing, etc., complete.
83Painting new iron works with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officer. (The make quality and colour of paint should be got approved by the Engineer before use on work).
84Painting new wood works of two coats with best approved first quality and colour of synthetic enamel paint over a priming coat of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make quality and colour of paint should be got approved by the Engineer before use on work).
85Manufacturing, Supplying and fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc., complete.
86Supplying and fixing of Stainless Steel pipe made out of SS 304 grade 50.80 mm dia stainless steel tube of 1.60 mm thick at required height to hold by the physically challenged persons toilets including labour charges for cutting, welding and fix with MS flats (excluding cost of flat) etc., complete complying with standard specification and as directed by the departmental officers.
87Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.
88Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed
89Providing expansion joint 12.50mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed
90Providing Polymer based water proofing treatment for the roof slab by pressure grouting of 60cm deep at 45 cm regular interval and injecting cement based water proofing compound to arrest void if any and by applying cement based water proffing compound to a thickness of 1mm of the prepared surface.Providing cement mortar 1:3 water proofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make.The rate includes all chemicals,materials etc.,complete.
91Brick jelly lime concrete of mix Brick Jelly Concrete 1:2:5 using brick jelly of size 40mm in Lime Mortar 1:2 for sunken floor filling including laying, finishing and curing as directed by the Department Officers complete complying with standard specification.
92Supplying and fixing in position C.I.Manhole covers(heavy duty) 600x600mm size of best approved quality and as per standard specifications etc.,complete.
93Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
94Supplying and fixing of NP III Class RCC Hume Pipe of flush joint to a size of 300mm diameter, RCC wall of 40mm thick to a length of 2.50m in RCC M35 with nominal special reinforcement as directed by the departmental officers etc., complete complying with standard specification.The rate include cost of materials, labour charges, conveyancecharges and all other incidental charges etc., complete.
95Supplying and installation of Ceramic Steel chalk writing board with the following specification. The 2mm GI Sheet is placed with wall side over the GI sheet necessary adhesive is spreaded and fixed the 9mm MDF board on the GI sheet 0.40mm thick ceramic steel chalk board is provided over the MDF board and the whole arrangements are fixed to the frame using heavy anodized Aluminium section and Chromium plated provided in the corners. The whole arrangement are fixed to the wall using wooden plugs and screws etc., The rate includes all above materials, labour charges and taxes etc., complete complying with standard specification and as directed by the departmental officers.
96Supplying and fixing of good quality and best make of Chalk Piece and Duster Holder of size 300 x 200mm made up of stainless steel in the places shown by the departmental officers including transporting to the work site, fixing in position etc., complete complying with standard specification.
97Supplying and fixing of Reverse Osmosis Plant of capacity 500 litres per hour. The Reverse Osmosis plant is stainless steel skid mounted with the parts. Raw water from the water tank is fed in to Pressure sand filter by raw water feed pump. The Pressure sand filter consists of FRP Vessel, Multiport valve and filtration media of pebbles & sand. Raw water enters in to the top of vessel and percolate through filter media and the suspended particles traps in the filter media top. Filtered water flows through Activated carbon filter for removal of colour and organic particles present in the water.The water passes through 10, 5 Micron filter to ensure the fine filtration of feed water. Micron filter made of Polypropylene material and its housing also made of PP. This fine prefiltered water pumped in to RO membrane in the pressure of 10-12 kg/cm2 through high pressure pump.The RO membrane made of thin film composite polyamide and it pore size 0.0001 microns (pore size lesser than Bacteria and virus). After penetrating through this membrane the purified water is collected in the center of the membrane and the salt, bacteria are rejected from the membrane side way. This purified water is collected in to water storage tank for further distributions. The reject water from the RO plant will have a higher TDS and the water is suitable for external applications like sanitary applications, flushing lines, gardening, etc., and as directed by the departmental officers. The rate includes cost of plant, cost of storage tank, loading and unloading, transportation charges, electrification charges, all taxes and all other incidental charges etc., complete. (All items rate sl.no 299) 500 Litres
98Supplying, fabricating, erecting and fixing calcium silicate Board false ceiling upto a ceiling height of 4.50m from floor level with plain gyp boards of 10mm thick and GI metal channel of size 45 X 15 X 0.9mm forming a grid of 120 X 60cm and anchored to the celing with dash fasteners of 12.50mm dia, 40mm long 6mm dia bolt and nut to the hanger of 25x25x5mm of required length. The other end of the angle fixed with bolt and nut to GI channel. The GI frame work will be covered with 10mm thick gyp board of approved quality confirming to IS 2095 etc., complete.Using Perforated Sheets (10mm thick)
99Supply and fixing Gypboard based and approved design of cornice etc complete.
100Supplying and fixing ornamental Brass-in-lay Burma Teak Wood Entrance Door with a size of 2.10 m x 2.55m with six leaves as per the drawing and design as approved by the departmental officers.The clear opening of each door shall be of 2.00m. The outer frames are of finished size 175mm x 125mm.The Each door shall have two leaves of 1/3 panelled and 2/3 glazed. The Outer frame of the shutter of finished size of 150mm x 50mm.All the Panels shall be of finished 50mm thick. The main outer frame, shutter frame and panels shall be engraved with computer design ornamental carving works of approved pattern with skilled carpenter as directed by departmental officers. All the glazing works shall be done with design painting works.Necessary grill protection arrangements shall be made for the glass portion. The door frame and shutters shall given two coats of best and approved quality of high Glossy Polyurethane finish.The rate includes cost of best and approved quality of Burma Teak wood,design painted glass, Brass hinges,Tower bolts, Aldrop, locking arrangments,ornamental handles,brass screws and labour charges, transportion charges, all taxes, etc., complete.
101Providing and fixng of normal structural glazing (stick type system) all panels fixed where all aluminium members are cancelled and only glass is visible outside,using special designed indal equivalent 63 x 38 x 1.50mm section. For frame work, burnt brozne colour anodized aliminium extruted section in colly 63400 WP, using expansion fastners of a aluminium - no. 10 x 60mm with a pullout strength of 1000 Kgs each. Glazed with 5mm thick blue colour reflective glass using high performance import double side VHB (Nippon) tapes, the grooves (5mm to 6mm) will be closed with weather grade silicon sealant (789 & GP) We will ensure that the whole system used corrosion resistant hardwares,is totally weather proof, permits necessary, thermal expansion/ Construction an is able to withstand high wind loads. Drilling fixing with neat finishing and laso inclusive of conveyance. Loading and unloading etc., and as directed by the drawing and desiging by the departmental officers.
102Supplying and fixing of Aluminium Dye cast letters 9\\" size in Tamil of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc., complete.
103Supplying and fixing of Emblem (15”) of approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. The rate is inclusive of all charges such as conveyance of letters, fixing the letters to the wall tiles (or) granite etc., and with necessary scaffolding charges and redoing the wall to the original condition etc., complete.( Tamil SS letters)
104Supplying and fixing in position of Incinerator for Ladies Bathroom (For School Works) etc.,
105Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST / EQUIVALENT.
106Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharges hose, wall mounting bracket, safety clip, etc., as directed by Departmental Officers.
107Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board
108Drilling of 6\\" dia (150mm dia) bore wells in hard rock areas any where in tamilnadu including transportation to the work site in hard rock areas, labour charges for flushing of bore well etc.. complete and as directed by the departmental officers..
109Up to 150m below Ground Level
110From 151m to 180m
111From 181m to 210m
112From 211m to 240m
113From 241m to 270m
114Supplying and fixing of 160mm dia PVC End cap for borewell (For 160mm dia casing pipe) of best approved quality etc., complete
115Supplying and fixing HDPE pipe for sub-mergible pump in Bore well (class-5 1 MPa or 10 Kg / cm2 pressure) of best approved quality including welding wherever necessary etc., complete as directed by the Executive Engineer. The pipe should be got approved by the Executive Engineer before use on works.
116Supplying and fixing of M.S Borewell clamp suitable for 40mm dia HDPE Pipe and 4 nos of 5/8\\" x 21/2\\" bolts and nuts of best approved quality etc., complete.
117Supplying, fixing and Erecting in position of 3 phase multi stage 5.00 H.P Submersible Pumpset suitable for 150mm dia Borewell with ISI IS 8034 with 3 phase Panel Board - D.O.L with two level guard and Auto start including Labour Charges and Transport charges etc., complete complying with standard specification.
118Supplying and delivery of Nylon rope of 18mm dia for holding the submersible pumpset and HDPE pipe etc., complete.
119Supplying and fixing of 3 x 4 sq.mm PVC insulated and sheated 3 core flat type copper cable confirming to IS 694/1990etc., complete complying with standard specifications.
120Supplying, laying and jointing UPVC Pipes (having work pressure of 10 kg/sqcm) of approved quality and best variety conforming to BIS of the following dia including cutting threading and fixing of PVC specials using PVC adhesive (but excluding cost of such specials) and fixing into wall with teakwood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/cement concrete and plastering neatly wherever necessary with necessary scaffolding charges etc., complete complying with standard specification. (The PVC pipes shall be got approved by the Executive Engineer before use on works). (External Water Supply Arrangements) Below Ground level. 50 mm Dia UPVC pipes
121Supplying, laying and jointing UPVC Pipes (having work pressure of 10 kg/sqcm) of approved quality and best variety conforming to BIS of the following dia including cutting threading and fixing of PVC specials using PVC adhesive (but excluding cost of such specials) and fixing into wall with teakwood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/cement concrete and plastering neatly wherever necessary with necessary scaffolding charges etc., complete complying with standard specification. (The PVC pipes shall be got approved by the Executive Engineer before use on works). (External Water Supply Arrangements- Above ground level)
12240mm dia UPVC Pipe
12332mm dia UPVC Pipe
124Supplying, laying and jointing UPVC Pipes (having work pressure of 10 kg/sqcm) of approved quality and best variety conforming to BIS of the following dia including cutting threading and fixing of PVC specials using PVC adhesive (but excluding cost of such specials) and fixing into wall with teakwood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/cement concrete and plastering neatly wherever necessary with necessary scaffolding charges etc., complete complying with standard specification. (The PVC pipes shall be got approved by the Executive Engineer before use on works). (Internal Water Supply Arrangements- Above Ground Level)
12525mm dia UPVC Pipe
12620mm dia UPVC Pipe
127Supplying and fixing in position of the following UPVC specials such as union, elbow Tee, reducer, reducer elbow and hex nipple of various sizes best quality confirming to ISS and providing leakproof joints including fixing to wall and UPVCing connection to the oriUPVCnal condition etc., complete complying with standard specification.(The UPVC specials should be got approved by the departmental officer before use on works).
12850mm dia UPVC Union
12940mm dia UPVC Union
13032mm dia UPVC Union
13125mm dia UPVC Union
13250mm dia UPVC Elbow
13340mm dia UPVC Elbow
13432mm dia UPVC Elbow
13525mm dia UPVC Elbow
13640mm dia UPVC Hex Nipple
13732mm dia UPVC Hex Nipple
13825mm dia UPVC Hex Nipple
13925x20mm UPVC Reducer Elbow
14020x15mm UPVC Reducer Elbow
14140mm dia UPVC Tee
14232mm dia UPVC Tee
14325mm dia UPVC Tee
14425x20mm UPVC Reducer Tee
14520x15mm UPVC Reducer Tee
146Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
14732mm dia Gate valve
14825mm dia Gate valve
149Supplying & fixing inposition 15mm dia Chromium Plated brass screw down tap (heavy type) of approved make confirming to ISS and including cost of shellac, thread etc., complying with standard specification and including cutting and threading wherever necessary (Taps should be got approved by the Departmental officers before use on works]
150Supplying and fixing in position of best quality approved make 1000 litre capacity PVC Water Tank with all accessories etc., complete complying with standard specification and as directed by the departmental officers.
151Supplying and fixing inposition Indian water closet oriya type of size 580x440mm white glazed earthernware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5[one part of lime, two part of sand & five part of brick jelly] 100mm thick and finishing the top to required slope & including giving necessary connection to PVC pipes by dismantling brick masonry,reinforced cement concrete roof/floor slab & making good the disturbed portion to original condition without leakage etc.,complete complying with standard specification and as directed by the departmental officers [The Oriya type water closet should be got approved by the departmental officers before use on works]
152Supplying and fixing inposition white glazed European water closet of best quality and approved make with 100mm 'p' or 'S' trap connecting with PVC pipe with double flapped rigid PVC black seat & seat cover with chromium plate brass hinges,including supplying and fixing PVC low level flushing tank 10 litre capacity of approved quality on wall with teak wood plugs, brass screws and 2 numbers 15mm dia gun metal wheel valve, 15mm dia nylon connection & giving necessary water supply connection as directed by the departmental officers the rate includes cost of 100mm dia PVC pipe 60cm long including cost of 3 Kg. of white cement 6 Kg. of cement, spunyarn, shellac, thread ball, teak wood plugs, brass screws 75mmx10mm. The European water closet and flushing tank should be got by the departmental officers before use on works]
153Supplying and fixing SS health faucet of best quality with control valve as directed by the departmental officer.
154Supplying and fixing inposition Indian make white glazed earternware lipped mouth flat back urinal of approved quality with G.I pipe connection to suitable length,32mm bekk mouthed PVC connection,15mm dia G.M wheel value,fixing the urinal to the wall inposition with necessary T.W plugs, clamps, screws shellac etc., including dismantling masonry if necessary and redoing the same to original condition fixing the 15mm dia G.I pipe connection & wheel valve,painting the pipe with two coats of approved paint over one coat of primer & checked without any leakage complete complying with standard specifications [The urinals should be got approved by the Executive Engineer before use on works]
155Supplying and fixing of Jet Black Granite slab 1200x600mm -18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,
156Supplying and fixing inposition best quality of approved make white glazed earthernware Wash Hand Basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia brass cromium plated pillar tap, 32mm dia C.P waste, 32mm dia PVC waste pipe with rubber plug & chain, 15mm dia gun metal wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc.,including fixing the hand basin in the wall inposition with a pair of C.I brackets with teak wood plugs & screws & giving necessary water supply connection & painting the brackets with two coats of over a priming coat of anticorrosive paint including testing for leakage etc., complete as directed by the departmental officers complying with standard specifications [The wash hand basin and special should be got approved by the Departmental officers before use on works] [Wash hand basin white without pedestal]
157Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] Without Pedestal
158Supplying and fixing in position of 15mm SS Swan neck Tap of approved make confirming to ISS and including cost of shellac, thread etc., complying with standard specification and including cutting and threading wherever necessary etc., complete.
159Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
160Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The towel rail should be got approved by Executive Engineer before use on works).
161Supplying and fixing position P.V.C Nahani Trap of the size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of CS sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three CS sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
162Supplying and fixing in position best quality PVC Soil/ Waste pipes( 6 kg/cm2 ) of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitory fittings, dismantling masontry etc., complete complying with standard specification. (Above Ground level)
16375mm dia PVC Soil Pipe
164110mm dia PVC Soil Pipe
165160mm dia PVC Soil Pipe
166Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
167110mm dia PVC door Tee
168110mm dia PVC Door \\"Y\\"
16975mm dia PVC door Elbow
17075mm dia PVC plain Bend
171PVC Cowl 110mm dia
172PVC Cowl 75 mm dia
173Supplying and laying of Tamin Interlocking Paver Block 60mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.
174Supplying and laying of Tamin Interlocking Paver Block 80mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.
175Supplying and fixing Colour galvalume sheet roof of 0.47mm thick including fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.
176Supplying and fixing in position 'B' Class GI pipes of size 50mm for holding the galvalume sheet roof including dismantling the masonry etc. including one coat of red oxide primer.
177Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers.( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before use on work
178Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work).
179Painting the wall with Texture Finish Paint including labour charges
180Supply of Chief Executive Table Arc Shaped table Special type (TANSI Catalogue code TWTBL 007).The rate includes cost of all materials labour conveyance loading and unloading charges etc., complete complying with standard specification and as directed by the departmental officers
181Supply of \\"S\\" Type chair with with Cushion seat and back in fabric finish (TANSI Catalogue code -TSCHR 016 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
182Supply of Steel Dual desk M top of size 5'x3.25'x2/12' (TANSI Catalogue code -TNDSK-001 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
183Supply of Senior Exectuive table (Special type) of 72\\"x48\\"x30\\" (TANSI Catalogue code -TWTBL -010 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
184Supply of Steel Plain Table of size 36\\"x24x30\\" (TANSI Catalogue code -TSTBL -001 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
185Supply of Steel Square stool with metal top of size 15\\"x15\\"x24\\" (TANSI Catalogue code -TSSTL -002 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
186Supply of Steel Rack (Open Type) of size 75\\"x33\\"x18\\" (TANSI Catalogue code -TSRCK -001 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
187Supply of Steel Rack (Open Type) of size 36\\"x33\\"x12\\" (TANSI Catalogue code -TSRCK -002 ). The rate includes cost of all materials, labour, conveyence, loading and unloding charges etc., complete complying with standard specification and as directed by the departmental officers.
188Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )
189Wiring with 2 x1.5 sq.mm PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End
190Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End
191Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting.
192Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube(Higher End) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube.
193Supply and fixing of 4'20W twin box type LED flu Fitting (Higher end) complete with conduit pipe suspension from the ceiling with LED flu tube with PVC unsheathed leads from terminals to the fitting
194Supply and fixing of WT bulk head fitting with guard suitable with 9W LED bulb.
195supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting
196Supply and fixing of 2'x2' 36W LED surface mounted square type LED Fitting Higher end complete on ceiling, with PVC unsheathed Copper leads from the terminals to the fittings
197Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.
198Supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 metre down rod on the existing fan clamp.
199Supply and fixing of 1400mm (56\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 metre down rod on the existing fan clamp.
200Supply and fixing of 300 mm (12\\") sweep (light duty) AC exhaust fan complete with out provision of hole in the wall
201Supply and fixing of louver shutter arrangements for 300 mm (12\\") sweep (light duty) AC exhaust fan
202Supply and fixing of 2 nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.
203Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.
204Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Higher end)
205Supply and fixing of 32A DP MCB in suitable sheet steel enclosure in flush with wall with earth connection (Higher end)
206Supply and fixing of 32A FP MCB in suitable sheet steel enclosure in flush with wall with arth connection (Higher end)
207Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with Double Door and 1No 32 Amps DP MCB 10 KA as incoming, 6 No’s 6 Amps to 32 Amps SP MCB 10 KA outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's with ISI mark (Higher end)
208Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with Double Door and 1No 40 Amps DP MCB 10 KA as incoming, 6 No’s 6 Amps to 32 Amps SP MCB 10 KA outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's with ISI mark (Higher end)
209Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
210Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 2Nos 32A TP MCB with 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (Pump room)
211Supply and Fixing of 3 Ph 4 way Vertical type 160 A 16 KA MCCB DB with IP 43 protection Double door type DB (legrand) with 1No 125A 4P MCCB 16 KA as incoming and 4 No's 63A TP MCB 10 KA as outgoing with cable entry boxes in suitable angle iron frame work with earth connection only. (The MCCB DB, and MCCB's and MCB's Like Higher end (Main Lighting)
212Supply and run of 2 of 1.5 sq mm (22/0.3) PVC insulated SC unsheathed Cu Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with painting of suitable colour
213Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour
214Supply and run of 2 of 4 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour
215Supply and run of 2 of 6 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6sq.mm copper wire and making good of the concealed portion with suitable colour
216Supply and run of 4 of 4 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour
217Supply and run of 4 of 10 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour
218Supply and run of 4 of 16 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour
219Supply and run of 4 of 16 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour
220Sub switch Panel: Supply and Erection of 400A capacity Dust and Vermin Proof Cubical Panel Board made up of 16 SWG CRCA steel with supply and fixing of the following interior mounting fuse switches with HRC fuses arranged in two Horizontal rows with one switch over the other with a central bus bar chamber and two nos of Horizontal cable chambers at the two ends one on each side next to the fuse switch chamber and confirming to IE rules. EB INCOMER: 400A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No DG INCOMER: 400A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No OUTGOING:200A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -2Nos ,120A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -6Nos,63A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -2Nos (All the TPN Switch should be Siemens with Front Handle) Suitable The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and each switch should be connected with the 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly.
221The panel should have a separate metering chamber at the top side consisting of 0-600V Voltmeter with Selector Switch, 0-400A Ammeter with Selector Switch and C.T arrangement Pilot lamps, toggle switches, fuse unit (Siemens) indicator lamps should be provided with control switches and fuse unit The panel should be Powder Coat paint of approved colour, approved by the site officer and also the danger board .The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection.
222Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
223Supply and clamping of 3 1/2 X 185 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps.
224Supply and fixing of brass cable gland for 3 1/2 X 185 samm PVC LTUG armoured cable with earth connection
225Supply and providing cable end termination of 3 1/2 X 185 sq.mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete
226Supply and clamping of 3 1/2 x 50 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
227Supply and fixing of brass cable gland for 3 1/2 x 50 sqmm PVC armoured LTUG cable with earth connection.
228Supply and providing cable end termination of 3 1/2 x 50 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
229Earthing as per ISI specifications with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm with copper plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonary work and with 38mm RCC cover slab for brick masonary.
230Supply and fixing of 25x3mm copper flat with necessary clamp/ supports on wall / floor / ground for earth connection
231Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
232Fabrication, Errection, Testing and commissioning of pedestal mounted pillar box made out of 16SWG CRCA MS Sheet of size 48”x36”x18” out door Type with double compartment and with angle iron stiffener with front open doors for each compartment with lock and key facilities with sealing (TNEB Type) arrangement with dust and Vermin proof and space for fixing TNEB Electronic type energy meter suitable for 3 phase 415 V 4wire 50 HZ AC supply having 400A Capacity Copper Bus bar on suitable bus insulators and provision for mounting 3 Nos C.T.S of 400/5A for incoming to the energy meter and supply and fixing of 3 Nos.400A fuse Units and neutral link on 6mm Thick Hylum sheet and provision for cable entry for both incoming and outgoing cables at the bottom and painting the board with Two coats of anti-corrosive paint of approved colour with earth connection and comprising the following. 1. Digital Voltmeter and Ammeter with suitable Rotary 2. LED Indicator light arrangement with suitable push switch and fuse units , 3. 1 No earth bus of 0.75 mts of 1”x1/8” Copper flat at one side, 4. Base channel fixed at the bottom of pillar box , 5. View glasses fixed with at both compartments, 6. Caution / Danger board, 7. For meter wiring should be made with identification ferules, 8. The whole arrangements should be errected on suitable masonary pedestal (MR).
233Supply and fixing of 3 Phase 400A aerial fuse units for 3 Nos 400A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work with the tapping pole with necessary clamps.
234Supply and run of Gang Bell 12\\" on suitable angle iron frame work with necessary connections and push bell suitable for 230V AC supply
235Supply and fixing of 400 Amps TPN sheet double break switch with HRC fuse and neutral on suitable angle iron framework with MS cable entry boxes and with earth completion only
236Design, supply erection 20 KVAR 5 stage switching, sequence automatic power factor correction wall mounting stand vermin proof cubical panel board made of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting capacitor chamber relay with metering chamber and compartmentalised out going feeders with suitable capacity MCCB with panel board with provision for louvers and cooling fan for proper ventilation to manage heat load incoming - 100A FP MCCB with rotary handle.Outgoing :5 stage capacitor bank,Contactors:Bharatia Cuttler Hammer Heavy Duty contactors.Relays:World class solid state relays with TM2 technology as an option.Capacitor MPP capacitor 5 stage from 1 KVAR to 20 KVAR, Bus bar: 25 mm x 6mm tinned copper , Metering : 1-500A Ammeter with CT coil 2) 0-500V voltmeter. 3) Advance micro controller based intelegent power factor controller with self dianostic sensing and digital net work analayset with software for mentiory and saving para meter of a suitable multi function meter.Indication: R,Y,B , The panel should be coated with Epoxy based painting and the whole assembly fixed in suitable cubical panel grouted in floor with connection complete.
237Supply and fixing of LT cable route indicator with suitable angle not less than 38mm x 38mm 6mm and 0.6mtr long excavation of earth to a depth of 0.6 mtr and concreting the ground level and making good of the ground as directed by the departmental officers .
238Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
239Supply and clamping of 31/2 X 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
240Supply and fixing of brass cable gland for 31/2 X 25 sq.mm PVC armoured LTUG cable with earth connection.
241Supply and providing cable end termination of 3 1/2 x 25 sq.mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
242Supply, Installation, Testing and commissioning of 3 KVA ONLINE UPS system 1 phase input and single phase output and as per the detailed specification enclosed, Sealed Maintenance free batteries 100AH -suitable Nos to support 3 KVA for 2 hrs backup complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adequate support to carry the load of the batteries.The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation.
243Supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .
244Supply and laying of 4x10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
245Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
246Supply and fixing of brass cable gland for 2 x 25 sq.mm. PVC armoured LTUG cable with earth connection
247Supply and fixing of 100W LED Flood light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .
248On Grid Solar PV Plant comprising of:i)Solar panels of type Mono Crystline, PERC, etc.ii) Power Conditioning Unit (PCU)with MPPT, Inverter,Controls, Protection Devices, Interconnecting D.C.cables, Connectors, Junction Boxes and accessories.iii) D.C. D.Biv) A.C. D.Bv) A.C. cables and accessoriesvi) Lightning arrestor, earthing, etc.vii) Module Metallic Mounting Structuresviii) Installation, Testing and Commissioning correspondsto BIS and IEC requirements.
249Supply and run of 25 mm x 6 mm GI flat with necessary insulators at each 0.5mtr and in level and with suitable MS clamp grouted on wall/terrace with necessary bolt and nuts ensuring complete electrical continuity and with rivet joints fixed lightening conductor.
250Supply and run of 25 mm x 6 mm GI flat for vertical drop with suitable clamping arrangements terace to ground level with suitable insolator at each 0.5 mtr interval on suitable MS clamp including scaffolding charges.
251Supply and run of 25 mm x 6 mm GI flat with suitable HDPE pipe on wall near ground level with suitabe clamp set.
252Supply and fixing of lightining arrestor/conductor made up of 2.5\\" dia Electroletic copper ball with 5 Nos spikes each 5 inches long 1 inch dia copper pipe of 4 feet long (2mm thick) with suitable base to be fixed on suitable supporting structure and supply and fixing of 3 meters of 2\\" dia GI pipe (B class)/ suitable 'L' angle for the lighting conductor with necessary heavy duty clamping arrangements on top wall supporter with stay set arrangements with masonary pedestal to withstand wind preassure .
253GST 18 % Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58645096
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 17.19 Crore
LAST DATE 21-12-2026
Authority
Authority Name Higher Education Commission
Work Description Tender for Construction Of Permanent Building For Government Arts And Science College At K.V.Kuppam In Vellore District.
Basic Detail
Tender No 24CE/2026-27
Bidding Type Tender
Location
City Vellore
State Tamil Nadu
Key Dates
Publish Date 20 Nov 2026
Submission Date 21 Dec 2026
Open Date 22 Dec 2026
Finance
Tender Value 17.19 Crore
Tender Fee Ref. Documents
EMD 8.70 Lakhs
Exemption Not Available
Document List
3e6a4a6f-3907-407e-b2c0-806090460be1.html
BOQ_874463.xls
KVK_cover_1.pdf
KVK_Cover_2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 30 days
Dec 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 31 days

Tender Documents

Download All (ZIP) ↓
html

3e6a4a6f-3907-407e-b2c0-806090460be1.html

xls

BOQ_874463.xls

pdf

KVK_cover_1.pdf

pdf

KVK_Cover_2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender