Water Resources and Irrigation Government Departments Closing in 10 days TDR #58642862

Tender For Maintenance And Repair Of Executive Engineer And Sub-Divisional Officers (I&Ii) Chamber At Teesta Pally Under Teesta Canal Division No-I, Islampur, Dist.- Uttar Dinajpur.

Issued by Government Departments · Dinajpur Uttar, West Bengal
Tender Value
2.97 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
5946
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Uttar → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Maintenance And Repair Of Executive Engineer And Sub-Divisional Officers (I&Ii) Chamber At Teesta Pally Under Teesta Canal Division No-I, Islampur, Dist.- Uttar Dinajpur.

BOQ

Name of Work:- Maintenance and Repair of Executive Engineer and Sub-Divisional Officers (I&II) Chamber at Teesta Pally under Teesta Canal Division No-I, Islampur, Dist.- Uttar Dinajpur.
Sl. No. Item Description
1P.V.C Partition:Supplying,fitting and fixing the partition,frame will be made with rectangularsteel tube of size 50mm x 25mm with wall thickness not less than 1.00mm. Thevertical members duly welded to the horizontal members shall be placed between1000mm to 1200mm apart the entire partition frame will be securedly fixed to thewall, ceiling and floor using rawlplug or wooden gutties and screws etc.the framewill be painted with synthetic paint, the section of the partition frame will thenfitted with PRINTED LAMINATED P.V.C extruded hollow section of size100mmx25mm. panel with approved quality fixed in the place by means of P.V.Cextruded beading on both sides or P.V.C extruded angles (20mmx18mm) on oneside and P.V.C extruded beading (9mmx9mm) on other side ,angle/beading willbe fixed to the steel frame by 19mm (nos.6) self tapping steel screw placed at aninterval of 450mm and complete in all respect as per direction of Engineer-in-Charge with all labour and materialsIn ground floor.. (Add. above ground floor - 1st. floor)
2(A) Providing and fixing of false ceiling with powder coated exposed G.I. gridsuspension system (T-Grid T 2430 or having load carrying capacity with midspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c)consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long andWall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The Main Runnersto be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cutslots of Main Runner at regular interval of 600 mm to form a modular grid of1200mm X 600mm.Additional Cross Tees of 600 mm shall be placedperpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm diaG.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured NonAsbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size595 mm X 595 mm, conforming IS 14 862 & Type B Category III of ISO 8336,tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in theGrid module to form a False Ceiling. All complete as per the drawing &directions of Engineer-in-charge.In ground floor.False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-GridT-2430).
3Brick work with 1st class bricks in cement mortar (1:4)In Super structure, ground floor.
4Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar(b) 15 mm thick plasterIn ground floor
5Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(a) 20 mm thick plasterIn ground floor
6Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:.(b) two coat.
7Protective and decorative Acrylic exterior emulsion paint of approved quality , as per manufacture specification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.In ground floor ( two coat).( c) Super protective 100% Acrylic emulsion.
8Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.xi) 12mm thick clear glass.
9Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(i) Other Local Wood.
10Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
11Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in ground floor. (iii) 25mm thick planks(b) Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak
12(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
13(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.(b) On steel or other metal surface: (1) With super gloss (hi-gloss).(iv) Two coats (with any shade except white). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58642862
AUTHORITY Government Departments
TENDER VALUE 2.97 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Irrigation And Waterways Department
Work Description Tender for Maintenance And Repair Of Executive Engineer And Sub-Divisional Officers (I&Ii) Chamber At Teesta Pally Under Teesta Canal Division No-I, Islampur, Dist.- Uttar Dinajpur.
Basic Detail
Tender No NIT-08/2026-27
Bidding Type Tender
Location
City Dinajpur Uttar
State West Bengal
Key Dates
Publish Date 20 Nov 2026
Submission Date 02 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 2.97 Lakhs
Tender Fee Ref. Documents
EMD 5946
Exemption Available
Document List
2cedcb94-bb64-4d9b-978b-b3c34e46bfe8.html
BOQ_5216870.xls
F_2911.pdf
NIT08.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

2cedcb94-bb64-4d9b-978b-b3c34e46bfe8.html

xls

BOQ_5216870.xls

pdf

F_2911.pdf

pdf

NIT08.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender