Tender For Construction Of Road And Guard Wall From Samir Singh Shop (Nh 327 C Connecting) To Head Of Haren Singh At Vill- Chilim Khawa Jote, Dhamvita Sansad Under Ghosh Pukur Gp, Phansidewa Block, Dist. Darjeeling
Tender Value
60.92 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
14 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Road And Guard Wall From Samir Singh Shop (Nh 327 C Connecting) To Head Of Haren Singh At Vill- Chilim Khawa Jote, Dhamvita Sansad Under Ghosh Pukur Gp, Phansidewa Block, Dist. Darjeeling
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Soil with Dozer with lead up to 100 metresExcavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto adistance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections (Reference to MoRT&H's specification clause 301).Guard Wall |
| 2 | Back filling behind abutment, wing wall and return wall complete including spriklring water and throughly compacted with plate compactor/power rammer in layers not exceeding 150mm compacted thickness as per drawing and Technical Specification (710.1.4 of IRC:78 & MoRTH's specification 2200) (9B.) Sandy material |
| 3 | Plant Mix MethodConstruction of granular sub-base by providing graded material such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading spreading in uniform layers with motor grader on prepared surface, mixing by appropriate mechanical mixure (with controlled addition of water), and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 for grading-V Material (N.B. Variety) |
| 4 | Providing, laying, spreading and compacting graded stone aggregate conforming to the grading of table 400-13 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406. (N.B. Variety) |
| 5 | Tack Coat: Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).; On bituminous surface @ 0.25kg 0.3kg /sqm. |
| 6 | Tack Coat: Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).; On Granular surface @ 0.20kg 0.3kg /sqm. |
| 7 | Bituminous Macadam: Providing and laying bituminous macadamwith 100-120 TPH hot mixplant using crushed aggregates of specified grading premixed with approved bituminous binder @3.3% (min) for Grading-1 and 3.4% (min) for Grading-2 by weight of total mix, transported to site, laidover a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). for Grading II (19 mm nominal maximum aggregate size) Layer Thickness 50-75mm (N.B. Variety) |
| 8 | Providing, laying and rolling of open-graded premix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen of approved grade to required line, gradeandlevel to serveaswearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandemor other approved type roller 8-10 tonne capacity, finished to required level and grades(Reference to MORT&H's specification clause 510). (N.B. Variety) |
| 9 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511) |
| 10 | PCC 1:3:6 in FoundationPlain cement concrete of 1:3:6 nominal mix with crushed stone aggregate 40 mm nominal maximum size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as per the requirements of MORT&H's specification 1704.3.(N.B. Variety) |
| 11 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200).PCC Grade M15 (N.B. Variety) |
| 12 | Direction and Place Identification Signs with size more than 0.9 sqm size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity gradesheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 13 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 14 | ADD GST @ 18 % from Sl. No. 1 to 12 |
| 15 | ADD GST Factor @ 0.973 and Cost Index Factor @ 1.21 on Sl. No. 13 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender