Tender For Construction Of Additional Class Room At (I) Soair Fp School, (Ii) Banial Jr Basic School Within Tapan Block In The Dakshin Dinajpur District. (Total 2 Unit).
Tender Value
45.31 Lakhs
Estimated cost
Bid Submission
14 Dec 2026
23 days left
EMD
90630
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Dakshin → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Class Room At (I) Soair Fp School, (Ii) Banial Jr Basic School Within Tapan Block In The Dakshin Dinajpur District. (Total 2 Unit).
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 3 | Supplying and filling in plinth with sand under floors, including watering,ramming. consolidating and dressing complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | 1:2:4 (1 cement 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS. 9103 to accelerate retard setting of concrete, to improve durability and workability without impairing strength, including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge: for the following grades of concrete Note Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cementAll works upto plinth levelConcrete of M25 grade with minimum cement content of 300 kg/cum |
| 8 | All works upto floor V levelConcrete of M25 grade with minimum cement content of 300 kg/cum |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting bending, placing in position and binding all complete upto plinth level. Thermo Mecharvically Treated bars of grade Fe-500D or more |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting bending, placing in position and binding all complete above plinth level. Thermo Mecharvically Treated bars of grade Fe-500D or more |
| 11 | Ceritering and shuttering including strutting prapping Mc and removal of form forFoundations, footings, bases of columns etc. for mass concrete. |
| 12 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | Suspended floors, roofs, landings, balconies and access platform |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1: 6 (1 cement: 6 coarse sand) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:4 (1 cement 4 coarse sand) |
| 18 | Cement Plaster (In Fine sand)20 mm cement plaster of mix:1:6 (1 cement. 6 fine sand) |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix:1.4 (1 cement. 4 fine sand) |
| 20 | 12 mm cement plaster of mix:1:4 (1 cement:4 fine sand) |
| 21 | Cement concrete flooring 1:2:4 (1 cement 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 22 | Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime |
| 23 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied 0.90 litre/10 sqm) |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and foxed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 30 mm thick shutters |
| 26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250 X 10 mm |
| 27 | 100 X 10 mm |
| 28 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm |
| 29 | Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete |
| 30 | Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete:300 mm weighing not less than 330 gms |
| 31 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 32 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete |
| 33 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc, including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc |
| 34 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion,(1) Single socketed pipes. |
| 35 | Bend 87.5 degree 110 mm. Dia. |
| 36 | Sub Total |
| 37 | Amount after GST Correction Multiplying Factor @ 0.973 |
| 38 | Internal Electrical works |
| 39 | Sub Total |
| 40 | Add Cost Index |
| 41 | Sub Total |
| 42 | Add for EPF @ 6.25% |
| 43 | Add for EPF @ 1% |
| 44 | Add Non Scheduled Items:-Supply, Fitting and fixing of furnitures (table, chair, blackboard etc.) with all required fittings and works complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender