Tender For Expansion Of Vvip Circuit House Near Jalandhar Beach, Diu.
Tender Value
9.31 Crore
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
18.63 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Expansion Of Vvip Circuit House Near Jalandhar Beach, Diu.
BOQ
| Sl. No. | Item Description |
| 1 | Works |
| 2 | Civil Work : Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle |
| 3 | Earthwork for Embankment including breaking clods, dressing with all lead and lift and including watering rolling and consolidation of sub grade in layers at O.M.C. to required dry density including filling the depression which occur during the process using power roller 8T to 10T.(B) From Borrow area within 25 Km lead |
| 4 | Excavation for foundation up to 1.5m depth including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc.in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge. (For All kind of soil./Soft rock not requiring Blasting) |
| 5 | Excavation for foundation Depth From 1.5m to 3.0m including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc. in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge (For All kind of soil./Soft rock not requiring Blasting) |
| 6 | Excavation for foundation Depth From 3.0m to 5.0m including sorting out and stacking of useful materials, disposing off the excavated stuff within the site at all lead, all lift/depth anywhere from the site etc. in all sorts of soil and strata, including removal of surface water etc as necessary and as directed by Engineer-in-charge (For All kind of soil./Soft rock not requiring Blasting) |
| 7 | Excavation in Hard rock by dry-wet blasting and chiseling including dewatering preparing foundation base by proper benching and stepping and disposing of the excavated stuff within the site at all lead, all lift/depth any where from the site etc. in all Stuff removal of surface water etc as necessary and as directed by Engineer-in-charge for All Required depth as directed.(A) General blasting |
| 8 | Disposing off the un-used excavated earth for all lead and lift/ depth out side the site at non objectionable place as directed by Engineer in charge.25 Km lead |
| 9 | Filling available Excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means) |
| 10 | Providing Material and labour for Filling in plinth with coarse sand with CBR value higher than 8% under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge. 25 Km lead |
| 11 | Providing material and labour for Filling in foundation, plinth and plot Filling with murram or Selected Soil (brought from out side) CBR value higher than 8% in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge. |
| 12 | Providing Material & Labour For filling Rubble in Foundation, (Footing Base) in plinth and for plinth protection, filling, with Un screened gravel in Gaps & Consolidating Deposited Ramming and leveling the surface in layers of 20 cm thickness stone including watering, ramming well and consolidating each layer cut size stones. (Ramping by manual or mechanical means) complete as directed by Engineer in charge. |
| 13 | Providing Dewatering in all sorts of soil and soft murram, hard Murram and boulders, Soft Rock, Hard Rock including removal of surface water, water from foundation, trenches and ground water as necessary to performed construction required by the contract in accordance with the specification. |
| 14 | Providing Material & Labour For Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistent with I.S.I specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_Part-II Concentration Weight one percent is recommended i.e. one litre 20 EC chemical emulsion with 19 litre give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S |
| 15 | Providing Material & Labour For laying of Cement Concrete 1:4:8 (1-Cement : 4- coarse sand : 8) hand broken stone aggregates 40 mm nominal size in Foundation, Plinth,Excluding cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 16 | Providing Material & Labour For laying of Cement Concrete 1:3:6 (1-Cement : 3- coarse sand : 6) crushed stone aggregates 20 mm nominal size) in Foundation, Plinth, Pavement, Road work including cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 17 | Providing Material & Labour For laying of Cement Concrete 1:2:4 (1-Cement : 2- coarse sand : 4) Graded stone aggregates 20 mm nominal size in Foundation, Plinth, Pavement, Road work Excluding cost of form work, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge. |
| 18 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, Footings, base of columns, pavement, grade slab, roads and Mass concrete Below plinth & up to plinth Level Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. |
| 19 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Up To Plinth level) |
| 20 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 21 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 22 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Three level up to Floor Four Level) |
| 23 | Providing Material and labour for laying in Position Ready Mixed M-300 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 475 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Columns, Pillars posts and struts for Super structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Four level up to Floor Five Level) |
| 24 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels Below plinth & up to plinth Level Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level ) |
| 25 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level ) |
| 26 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 27 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Beams, Girders, Cantilevers,Copping, Lintels for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Three level up to Floor Four Level) |
| 28 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level) |
| 29 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 30 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 31 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Three level up to Floor Four Level) |
| 32 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs,Landing, wethersheds.for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Four level up to Floor Five Level) |
| 33 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Bellow Plinth & up to Plinth Level) |
| 34 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Plinth level to Floor Two Level) |
| 35 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge. (Above Floor Two level up to Floor Three Level) |
| 36 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure.Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Three level up to Floor Four Level) |
| 37 | Providing Material and labour for laying in Position Ready Mixed M-250 Grade concrete for reinforced cement concrete work using cement content as per approved batched and Design Mix Cement Concrete manufactured in Fully Automatic Batching plant and transported to site of work in transit mixer for a lead up to10 kms having continuous agitated mixer,manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 12 to 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) (Min cement level as per latest IS 456 shall be maintained ,Cement Level 380 kg) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in RCC Wall for Super Structure. Including compacted with vibrators ,watering, curing Etc. & also including cost of Form work with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and the cost of its removal will have to be borne along with all leads and lifts. The cost of Reinforcement steel will have to be calculated separately, which will be measured and Paid separately. The Entire work will have to be completed as per Directed by Engineer in- charge.(Above Floor Four level up to Floor Five Level) |
| 38 | Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, in to Stone masonry/RCC wall , Column, beam, Slab etc (Any Height , Any floor) (with Hilti RE500 V3 injection system or Fischer FIS EM injection system or Equivalent) as per manufacturer's specification and structural consultant's specification and fixing re bar of the required diameter subsequently up to 20 mm dia. drill hole and 300mm anchoring depth. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Re bar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed re bar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge. |
| 39 | Providing Material and labour For Centering and shuttering (Exceeds 4 .O Mt.) where ever required with adequate bracing, etc. including cost of de-shuttering and decentering at all levels,including strutting, propping etc.for additional height over a height above 4.0 m, up to 5.0 m between supporting floor to ceiling including temporary brick or stone pillars for supporting as required in Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) for every additional height of 1 metre or part there of.etc. all complete as per direction of engineer in charge. |
| 40 | Providing Material and labour For Centering and shuttering (Exceeds 4 .O Mt.) where ever required with adequate bracing, etc. including cost of de-shuttering and decentering at all levels,including strutting, propping etc.for additional height over a height above 5.0 m, up to 6.0 m between supporting floor to ceiling including temporary brick or stone pillars for supporting as required in Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) for every additional height of 1 metre or part there of.etc. all complete as per direction of engineer in charge. |
| 41 | Providing Material and Labour for Core cutting work in Stone/RCC/Brick structures of maximum 400mm depth up to 150mm Dia to 250mm with required core-cutting wet drilling, fastener tools, labour and supervision etc complete. |
| 42 | Providing Material & Labour for fixing of Floor joint of 100 mm gap expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). |
| 43 | Providing Material & Labour For Fixing of 150 mm wide Aluminium fluted strips 3.15 mm thick, sheet covering over expansion joints with iron screws as per design. complete as per direction of engineer in charge. |
| 44 | Providing Material and Labour for Thermo Mechanically Treated bar (T.M.T.) (I.S.I. Mark) conforming to I.S. - 1786 Fe-500 D Steel for R.C.C. work including bending, binding and placing in position complete.(All Floor) Make: TATA, SAIL, TISCO, RINL, JINDAL, JSW Steel or Equivalent |
| 45 | Providing Material and Labour With Fabricating & Fixing of M.S. grills Small Gate, Etc of required pattern to brick walls / Columns prepared with M.S. flats, angles, Square / round bars, square pipes, at required spacing with necessary cutting, bending, jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed . The rate to include all necessary fixtures, fastening etc & Cleaning with sand papering, Cleaning Weld dots with grinder machine with smooth joint of welding, & also including one coat of primer and two coats of mat finished oil painting etc complete. hold fasts as per detailed drawing and fixing brick walls / coping / columns etc. (Oil Paint Make Asian, Narolac/MS Steel Jindal, Asian, Tata) (A) Ornamental Grill |
| 46 | Providing Material and Labour for Fabricating, assembling, hoisting/ erecting and fixing in position Structural Steel Works in required pattern/ design at all heights/ all levels/ Scaffolding/all floors/ all shapes & sizes with all leads & lifts etc. using Structural Steel like ISMC, Box Pipe, ISMB, Angle, Plates/Bright Bars,round pipes MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts etc.confirming to latest relevant IS codes for the work of steel structures , including straightening, cutting, bending, bolting and welding the members including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degrease (wet cleaning) & preparation of rust free surface manually or mechanically, Fixing and erecting in position For Roof work Finch, & Main Gates, Etc as per detailed design/ drawings/ instructions. Also providing & painting with one coat of zinc chromate primer and two coats of enamel paint of Asian/ Narolac make as per Directed. providing welding electrodes of the approved make.complete with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys , also Cost included of furnish and erect at all height, all required Members as per detail ,all expenses derricks, shear legs, staging, & necessary Scaffolding, loading, unloading for the proper completion of the work. Structural Steel Making from /Tata, Vizag / Asian make. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by EIC. (Standard measurements will be paid for as actual cut length used at site) .(Brand: Tata Steel, Jindal) |
| 47 | Providing Material and labour for Laying of Masonry work using White Stone Bela masonry in up to plinth with White Bela Stone of approved quality course in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Foundation & up to Plinth Level) |
| 48 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Plinth up to Floor Two Level) |
| 49 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Two level up to Floor Three Level) |
| 50 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Three level up to Floor Four Level) |
| 51 | Providing Material and Labour for laying of Masonry work using White Stone Bela masonry work in superstructure with White Bela Stone of approved quality course in Cement Mortar in superstructure in Cement Mortar 1:5 (1- Cement : 5 - Fine sand) in any shape and thickness including packing the joints, finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Four level up to Floor Five Level) |
| 52 | Providing Material and Labour for White Stone Bela masonry Partition Wall (up to 15cm th. ) work with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in Foundation & Plinth and superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Foundation & Above Plinth up to Floor Two Level) |
| 53 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Two level up to Floor Three level) |
| 54 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Three level up to Floor Four Level) |
| 55 | Providing Material and Labour for White Stone Bela masonry Partition Wall work (up to 15cm th. ) with White Bela Stone of approved quality in Cement mortar 1:4 (1- Cement : 4 - Fine sand ) in superstructure in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.(Above Floor Four level up to Floor Five Level) |
| 56 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 2.10mm. Window Made outTwo Track Two Panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m). profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water ,Scaffolding, Working Plateform etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.(Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 57 | Providing and fixing factory made uPVC Three Track Three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series 115mm & above x 45mm & above ) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 58 | Providing and fixing factory made uPVC Fixed window / ventilator made of (small series 39mm & above x 39mm & above ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 59 | Providing and fixing factory made uPVC Casement window Double Panel With French(false) Mullion made of (small series 39mm & above x 39mm & above ) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, SS fasteners 100 x 10 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plateform etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC casement window,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 60 | Providing and fixing factory made uPVC Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series 115mm & above x 45mm & above) frame 116 x 45 mm &(44mm & above sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension sliding glazed door comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water, Scaffolding, Working Plate form etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 61 | Providing Material & labour For Structural Glass Glazing of Semi Unitized Glazing of 67 mm thick Metallic Finish Aluminium Frame Work of approved brand having Shutters of 24 DGU (6mm ST Series Reflective HS+ 12mm AG + 6mm Clear HS) having pattern and brand as approved by the Architect including fixing of all accessories of approved brand as per detailed drawing / as directed by Engineer In-charge etc. complete. |
| 62 | Providing and fixing Glazing With float Glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 63 | Providing and fixing glazing With float glass panes of 8 mm thickness (weight not less than 20kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and as per the directions of engineer-in-charge . |
| 64 | Providing Material and Labour With fixing of 12 mm thk.Single Shutter Toughened Glass door with edge polished fixing with first quality patch fitting double action floor springs on shutter at bottom efficient Dorma/ Ozone Make (Heavy duty) fixed into floor (including cutting for floor and repairing afterwards), with Two pairs of 600 mm long 25 mm dia Matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock,/ Mortise lock (as per drawing) on shutter with all necessary hardware. complete as per the drawing & design or as directed Eng-in charge. (All accessories brand : Dorma, Ozone, As per Consultant Selection) |
| 65 | Providing Material and Labour With fixing of 12 mm thk.Double Shutter Toughened Glass door with edge polished fixing with first quality patch fitting double action floor springs on each shutter at bottom efficient Dorma/ Ozone Make (Heavy duty) fixed into floor (including cutting for floor and repairing afterwards), with two pairs of 600 mm long 25 mm dia Matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock/ Mortise lock (as per drawing) on Each shutter with all necessary hardware. complete as per the drawing & design or as directed Eng-in charge.(All accessories brand : Dorma, Ozone, As per Consultant Selection) |
| 66 | Providing and fixing Paneled and glazed Single / Double shutters for open-able Doors,fixed Window & Made from 38mm thk 1st Class teak wood Planks As per Approved By architect & fixing with SS hinges of required size with necessary screws, & All Necessary hardware SS 316 handle, Stoppers etc , all complete as per direction of Engineer-in-charge Cost including for Melamine Polish & Required Beading Putty, Middle Putty as per Drawing & also including Providing & fixing of 5mm Glass As per Drawing. : Teak wood : 38mm thick shutter (type of wood Burma Teak as approved by architect or engineer in charge) |
| 67 | Providing Material and Labour With fixing of 35 mm thick Flush Door Single Shutters (Laminate Finish) Filled with country wood, Water Proof Single Shutter Cladding with 1 mm thk. High End laminate on Both side of the Door Shutter.The door with Lipping edging Patti with Melamine Polishing all around the door as per directed .Shutter to be fixed with using 5 nos heavy duty SS hinges & The door would have accessory like 2 Nos pull SS Handles in Brush finish of the size 25mm diameter, 600mm Long made from anti corrosive high grade AISI 316 stainless steel. also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame , SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 900mm x 2300mm) |
| 68 | Providing Material and Labour With fixing of 35mm thick Flush Door Double Shutters (Laminate Finish) Filled with country wood, Water Proof Single Shutter Cladding with 1 mm thk. High End laminate on Both side of the each Door Shutters. The door with Lipping edging Patti with Melamine Polishing all around the door as per directed Shutter to be fixed with using 5 nos heavy duty SS hinges & The door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door would have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 300 mm long made from anti corrosive high grade AISI 316 stainless steel on Each shutter . also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame , SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide Hydraulic door closer bottle type M.S. body (Heavy duty) or Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 1500mm x 2300mm) |
| 69 | Providing Material and Labour With fixing of 50 mm thick Flush Door Single shutter (Veneer Finish) Filled with country wood, water proof Flush door Single shutters. 50mm thk Door will be Made from (35mm Flush door+6mm Ply one side + 4mm Veneer on Both side total 50mm Thk) one layer of 6mm Plywood Cladding on one side of Flush Door & Both side Cladding with 4 mm Thk Approved Shed Veneer sheet(Brand: Greenlam, Century ply)Finished with Melamine polish & Lipping edging patti all around the door & Finished with Melamine polish. Shutter to be fixed with using 5 nos heavy duty SS hinges of approved brand & alsoThe door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 600mm long made from anti corrosive high grade AISI 316 stainless steel on Each shutter . also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide (Heavy duty) Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 900mm x 2300mm or As per Required) |
| 70 | Providing Material and Labour With fixing of 50 mm thick Flush Door Double Shutter (Veneer Finish) Filled with country wood,water proof Flush door Double shutters50mm thk Door will be Made from (35mm Flush door+ 6mm Ply one side+4mm Veneer on Both side total 50mm Thk) one layer of 6mm Plywood Cladding on one side of Flush Door & Both side Cladding with 4 mm Thk Approved Shed Veneer sheet(Brand: Greenlam, Century ply) Finished with Melamine polish & Lipping edging patti all around the door & Finished with Melamine polish. Each Shutter to be fixed with using 5 nos heavy duty SS hinges of approved brand & alsoThe door would have vision glass panel with 5mm glass (Each Shutter) including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 600mm long made from anti corrosive high grade AISI 316 stainless steel on Each shutter . also Providing and fixing one number of 10 mm diameter 20 cm long anti corrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame SS Stoppers,wall catch etc (on each shutter as per drawing) & also Provide (Heavy duty) Concealed Door Closer As per Drawing with necessary accessories and screws complete with All Required Nessesory accessories Hardware etc on Each Shutters, as approved by Engineer -in-charge . complete as per detailed drawing.(All accessories brand : Dorma, Ozone, Kich As per ConsultuntSelecttion) (Size of Door As Per drawing Apx 1250mm x 2300mm or As per Required) |
| 71 | Providing and fixing of Top Mounted Manual Single Side Sliding door Made from 35mm Thk Flush door & Finish with approved 1mm thk.Laminate finish on both side. sliding top mounted Sliding Track Dorma make or as per approved Make Complete with all required Accessory, handle, stoppers etc. |
| 72 | Providing Material and Labour for wood work in Frames of doors, windows, louvers clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be included & Melamine polishing As per Drawing ). First class Burma teak wood as approved by architect or engineer in charge) |
| 73 | Providing Material and Labour With Laying of Polished Granite slab 18-20 mm (Average) thick for Sill & Jambs for Door, Windows, Ventilators, Openings, Elevation Cut-outs, Compound Wall Top, Planter Cladding etc. as per design and Drawings incl. full molded round both edge on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand ) & polymer chemical Adhesives:Laticrete etc, jointed with Grey cement slurry including rubbing and polishing etc.complete.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 74 | Providing Material and Labour With Laying of Polished Granite stone slab 16-18 mm thick for skirting, Wall Dado,pillars,Lift wall Cladding etc. Fixed with Laticrete 325 as per directed by Engineer in-charge (Polymer Chemical adhesive : Laticrete 325 Required Chemical adhesive 4kg to 5kg / Sq Mt) on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand ) and jointed with Grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 75 | Providing Material and Labour With Laying of Italian Marble Flooring 18-20 mm thick slab. Flooring Size 600mm x 600mm /900x900 or as per Drawing and fixing as per Directed by Engineer in-charge) for Passage or any Space as per Drawing. including 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) & laid on New Surface of Floor By Adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including rubbing and polishing etc. complete.Marble shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 76 | Providing Material and Labour With Laying of Leather Finished Granite Flooring 18-20 mm thick stone slab. Flooring Size 600mm x 600mm or as per Drawing and fixing as per Directed by Engineer in-charge) for Passage or any Space as per Drawing. including 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) & laid on New Surface of Floor By Adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including rubbing and polishing etc. complete.Granite shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 77 | Providing Material and Labour With Laying of Kotah stone Flooring with inlay of Various Flooring material like Marble, Jesalmer or as per Directed (min 25mm thk ) Flooring Size 600mm x 600mm or as per Drawing and fixing as per Drawing for Passage or any Space.including 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)/ Lime Mortar & laid with Inlay on New Surface of Floor By Adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) Rate also including For Side cladding / Skirting at wall surfaces & including rubbing and polishing etc.complete.All Flooring Material shade As per Approved & Selection by Architect or Directed by Eng -in Charge |
| 78 | Providing Material and Labour With Laying of 120 cm x 60 cm Glossy/ MATT finished (Full Body Vitrified Tiles Flooring (9 to 10mm thk.Make RAK, Johnson,Simpolo Nexion). Flooring work over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface of floor by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning and finishing the surface etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 915/ Sq Mt) |
| 79 | Providing Material and Labour with laying of 120cm x 60 cm Glossy / MATT finished (Full Body Vitrified Tiles Wall Dado (9 to 10mm thk.Make RAK, Johnson,Simpolo Nexion). of approved shade in skirting, risers of steps and Wall dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 915/ Sq Mt) |
| 80 | Providing Material and Labour with laying of 60 cm x 60 cm (9mm thk) Flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers,Rubbing, Cleaning etc. complete. (RAK, Johnson,Simpolo, Kajariya ) (Basic Rate of tiles Rs 430sq Mt) |
| 81 | Providing Material and Labour with laying of 60cm x 60 cm Vitrified Tiles 9 to 10mm thk. approved Make & shade in skirting, risers of steps and Wall dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete. (Basic Rate of tiles Rs 430sq Mt) |
| 82 | Providing Material and Labour With Laying of 300mm x 300mm Glossy/ MATT finished Decorative Moroccan Vitrified Tiles (Make RAK,Kajaria,Simpolo) of approved shade Flooring over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface of floor by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout (Polymer Chemical adhesive: Laticrete 325) including Rubbing, Cleaning and finishing the surface etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 860/ Sq Mt) |
| 83 | Providing Material and Labour With Laying of 300mm x 300mm/ 100mm x100mm Glossy/ MATT finished Decorative Moroccan Vitrified Tiles (Make RAK,Kajaria,Simpolo)of approved shade in skirting, risers of steps and Wall dado over 10 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) & by adhesive material (Polymer Chemical adhesive: Laticrete 325) including finished with flush pointing and jointed with Approved Epoxy Grout, Rubbing, Cleaning etc. complete as per Drawing or as per Directed By Engineer in charge.(Basic Rate of tiles Rs 860/ Sq Mt) |
| 84 | Providing Material and Labour for 10mm thick cement plaster in single coat on Slab ceiling surface for plastering finished level and smooth including curing, scaffolding etc. complete in C:M (1 cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Engineer in charge Complete.Above Plinth to All Floor |
| 85 | Providing Material and Labour for 15mm thick cement plaster in single coat on brick, concrete wall surface for plastering finished even and smooth including curing scaffolding etc. complete in C:M 1:4 (1 cement : 4 fine sand ) and finished with floating coat of neat cement slurry also Fixing of GI mesh at all Horizontal & Vertical junction of Rcc Column/ beam & Brick work as directions of Engineer in charge Complete.Above Plinth to All Floor |
| 86 | Providing Material and Labour for 15 mm thick water proof cement plaster using water proofing powder 1Kg/1 bag of cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 3 ( 1 cement 3 coarse sand) including finishing with a floating coat of neat cement slurry etc complete for Above Plinth to All Floor |
| 87 | Providing Material and Labour for 20 mm thick double coat mala cement plaster on exterior/ interior, brick / concrete work walls up to any height for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trowel including scaffolding curing etc. complete. |
| 88 | Providing Material and labor for 20 mm thick rough finished (Sand Face) cement plaster on walls up to any height consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8 mm thick rough finishing coat of C.M. 1:1 (1-cement : 1-sand) on exterior brick / concrete work for (Area As per Directed) complete. For plastering bellow & above plinth up to all Floor complete. as directions of Engineer in charge Complete.(All Floor including Scaffolding) |
| 89 | Providing throating or plaster drip groove 10 x 10 MM and moulding to RCC Chhaja and horizontal surfaces. |
| 90 | Providing material and labour for fixing G.I. hexagonal chicken mesh of size 16mm x 24mm of 22 gauge at junction of concrete and brick work or between different materials after making \\"V\\" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary \\"U\\" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge. |
| 91 | Providing & Applying 12 to 15 mm th. Plaster of Paris layers on wall plastered surface & surface of required or directed by Eng- in charge including hacking finishing smooth, with proper level & handed over a clean & neat condition complete. The finished surface should be smooth and in perfect level so as to avoid un evenness and ready to take on paint. complete the work should be done as per directed by engineer in charge. (All Floor) |
| 92 | Providing material & labour for Ceiling painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated Ceiling surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor including Scaffolding) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent |
| 93 | Providing material & labour for Wall painting (two coats) with plastic Emulsion paint of approved brand and manufacture on un decorated wall surface to give an even shade including With applying Two coats of wall care Putty & two coat of primer thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete.(All Floor including Scaffolding) Make: Asian Paint, Dulex, Nerolac, Berger Jotun or equivalent./ Wall Care Putty Birla White.Asian Paints, JK,Berger paint, Nerolac or equivalent |
| 94 | Providing Material & Labour For Two coats of Primer and Two coats of Archi Concrete Pattern Texture on Exterior Surfaces at all heights.including cleaning, Preparing the surface,Scaffolding, Staging etc as per direction.Base Preparation - (a) Clean the surface and ensure it is free from algal and fungal growth and seepages post which apply Exterior Wall Primer (b) Applying 1st Coat , after Dry of surface & Applying 2nd Coat of Primer and suitable finishing to the complete satisfaction of the Engineer in Charge.Archi Concrete Application -(c) Apply 1st coat of Archi Concrete paste form on the primed surface using a steel trowel. Allow it to dry for 45 mins to an hour. Apply 2nd coat of Archi Concrete paste when the 1st coat is in semi-dry condition. Make the desired pattern using requisite tools. Allow it to dry for 5-10 mins. Buff the surface using a Steel Trowel. Excess buffing will flatten the surface & pattern will not visible. Buff the surface gently.& Proper curing in between the two subsequent coats.Applying Approved Exterior Paint (d) After 6 to 8 hrs of complete drying, apply the 1st coat of Exterior Paint As per Approved Shed (tinted and diluted by maximum 30%) and then apply tinted 2nd coat using CW sponge in the direction of the pattern (Vertical & Horizontal). Clean excess material using wet CW Sponge. In hot & dry climatic conditions, wet the surface with water before applying 2nd top coat to avoid section lines.Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer.Rate shall be inclusive of the cost of scaffolding , staging, plate form, Tools, Labour , Material, all lead & Lift etc .Also Make Three Sample of size 1.0 x 1.0 (without Any Extra Payment ) as per Directed Texture Finish & Paint shade As per Approved & Selection by Consultant or Directed by Eng -in Charge. Make - Asian Paint / Jotun Jotashield Tex Fine OR Equivalent |
| 95 | Providing Material & Labour for applying Painting two coats (Including priming coat) on new steel and other metal surface with Enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter.& also Applying priming coat over new steel and other metal surface with ready mixed priming paint brushing red lead. Rate shall be inclusive of the cost of scaffolding Complete as per Directed by Engineer In charge. |
| 96 | Providing Material & Labour for applying Two coats of abduct cured modified Epoxy marine paint of 150 micron each and 50 micron top coat of acrylic Pu finish. Including surface preparation by dry abrasive blasting of 45 to 60 microns with cleaning and removal of all dirt, grease, varnish, paint or any other foreign matter, including thinner and all accessories. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scaffolding.Staging, platform for any height (Brands: Jotun) |
| 97 | Providing Material & Labour for laying of water proofing treatment Terrace Area by Brick Batt Laying (a). Applying neat cement slurry 2.75 kg/m2 of cement admixed with water proofing compound after cleaning the surface. (b). Laying of bricks bats of 25 to75 mm size in CM 1:5 (1 cement : 5 course sand) admixed with water proofing compound over 20mm thick layer of cement mortar 1:5 to required slop including rounding of junctions of walls and slab with spacing not more than 30mm.(c) After two days of proper curing applying a second coat of cement slurry and cured for another two days. (d) Finishing the surface with 20mm thick cm 1:4 and cured for two days with required levels and slope including rounding of junctions at walls,curing etc.As directed and specified.Water pond should be carried out for a period of Seven days as directed by EIC.cement slurry admixed with approved water proofing compound (FosRoc / BASF / Dr. Fixit). |
| 98 | Providing Material & Labour for Water proofing treatment in sunken portion of WC, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/Sq.Mt. mixed with water proofing cement compound @ 0.253 kg/ Sq.Mt.. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/Sq.Mt. mixed with water proofing cement compound @ 0.126 kg/Sq.Mt.. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface Cement Concrete Mixed waterproof material at Protection of Drainage Fixtures like NT, Pipe Joint Connection Etc. Also treatment and sealing of all joints, corners, junctions of pipes and masonry with Lay a polypropylene sheet / Non-Woven Fabric Geo Textile Water Proofing Cloth wrapping and flatten and compact it. With polymer mixed slurry.Complete as per directed by Engineer in Charge. |
| 99 | Providing Material & Labour for cement Vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete. |
| 100 | Providing Material & Labour for laying Broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out up to surface using white cement including rounding off junctions and extending them up to 15 cm along the wall, clearing with water and oxalic acid etc. as directed. |
| 101 | Providing Material Labour for Constructing Sandwich Platform (600mm Width) Engineered quartz stone. Counter made from 15mm thick Polished Engineered quartz stone at top Counter to be made out of sandwich type construction with base in kadappah / Kotah stone 30mm thk Kotah stone slab flooring (15mm thick base cement mortar 1:4 ) fitting at bottom with cementing Materials / adhesives including making necessary grooves in walls & overlaid in Engineered quartz stone 75mm wide facia on three exposed sides. Counter to be held on to concealed MS brackets , all labour material of approved quality incl. full molded round front edge, Cost included necessary cut outs to take basin /S S sink and to take necessary Pipes as per detail drawing.& Including 19 mm th. BWP specified ply with both side laminated Shutters & Drawers With necessary hardware as per drawing |
| 102 | Providing Material Labour for Fixing of Polished Engineered quartz stone 15mm thk of approved quality and Shade incl. full molded round front edge fixed in wall for Urinal partitions and jointed with Grey cement slurry including rubbing and polishing etc. complete |
| 103 | Providing Material and Labour with fixing of stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. |
| 104 | Providing and fixing Free standing, frame less Glass Railing Systems a classically modern / the Traditional look wet-glaze installation method is a tried and true process that firmly secures the glass into the SS base shoe. Mount the shoe directly to the floor or side mount as a facia-mount.& Top Horizontal Flush Channel Tube & fixed 12mm thk.toughened Glass between top & base rail with stainless steel (Grade 316) Railing system of approved make & Top Slim Rail with hollow section tubes, square, Round, Rectangle etc with base plate Cover cap, finishing accessories, size as per drawing. Railing shall be top mounted or side/ wall mounted. Railing shall be fixed with SS 316 grade anchor fastener of required size and as per fixing position of approved make. No Welding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system up till handling over the project. |
| 105 | Providing and fixing stainless steel (Grade 304 Hand Railing ,(Single Pipe Rail) bump rail, guard rail, with Wall Support Clamp system made of Hollow tubes, finishing accessories, infilled holding brackets, fixing accessories etc. for any type of design, shape (plain/ curvature), size as per drawing. Railing shall be side wall mounted. Railing shall be fixed with SS 304 grade anchor fastener of required size and as per fixing position of approved make.Hand rail 50mm Dia Round Hollow Pipe 16 Gauge & Pipe Holding accessories every 900mm c/c or (as per drawing) at Wall with Fabricated or Connector joint Hollow sections are 1.6mm Thickness Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system up till handling over the project. |
| 106 | Providing and fixing precast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete as per approved design and including excavation/ re filling/ PCC 1:2:4 for fixing in proper line and level,filling the joint with C:M 1:3 (1 cement:3 fine sand) etc complete as per directed . |
| 107 | Providing and fixing precast Rubber Dye / Steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pneumatic compressed by Vibrated mechanically pressed and as per approved design Confirming to IS 15658 2006 including 75mm Sand layer for leveling and filling the joint with sand in proper line and level as per guidelines of IRC : SP 63-2018 etc complete. |
| 108 | Demolishing R.C.C. work manually/ by mechanical means including stacking of Steel bars, serviceable materials and disposal of unserviceable materials with all lead and lift. as per direction of Engineer - in- charge. |
| 109 | Demolition of Brick work and stone masonry,concrete block work manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.as per direction of Engineer - in- charge. (In Cement Mortar) |
| 110 | Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.as per direction of Engineer - in- charge. |
| 111 | Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift as per direction of Engineer - in- charge. |
| 112 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 113 | Dismantling of Roofing Including steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.etc. Work done for Any Height with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys Etc As per Directed |
| 114 | Dismantling of aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material. including dismembering ,disposal of unserviceable materials with all lead and lift.etc. Work done for Any Height with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys Etc As per Directed |
| 115 | Removal & Re installation of Existing Passenger Lift As per Required as bellow Specification. Existing Lift dismantling and re installation should be carried out by a qualified lift contractor, with electrical isolation, safe handling of the counterweight and machinery, and inspection/testing before the lift is used again. Re fixing costs will including the existing rails, Rope,motor, controller, Control Panel and safety components can be reused.Lift (elevator) demolition in buildings requires strict adherence to safety standards, risk assessments, and systematic dismantling procedures (such as BS 7255 and IS 4130 safety codes for building and equipment removal). Scope of work : Site Survey & Assessment: Inspecting the lift car, shaft, machine room, and structural anchor points to map access limits and identify hazards (such as old hydraulic oils or insulation materials.The contractor shall undertake the complete dismantling and removal of the existing lift installation, including the following items as applicable Lift car, car frame, platform, and car doors.Counterweight assembly and counterweight guide shoes.Landing doors, door frames, sills, and associated mechanisms.Guide rails, brackets, fish plates, and fixing fasteners.Hoisting machine, motor, gearbox, brake, and sheaves.Suspension ropes, governor ropes, and over speed governor.Lift controller panel, drive, wiring, travelling cable, and electrical accessories.Limit switches, landing indicators, push buttons, and sensors.Buffers, pit equipment, and other lift accessories.Removal of dismantled materials, debris, and scrap from the site.Making good openings, surfaces, and supports affected by the work, where specified. Re installation : Providing Re installation of Existing Lift with All Related Component with Care fully. Evaluating the shaft space, load-bearing capacity, and pit/machine room requirements,Preparing the hoistway, cutting or framing floor openings if needed, and installing support columns or guide rails.Mounting the elevator car, motor, safety gear, and cables.Connecting power supplies, safety sensors, backup inverters, and control panels. Testing & Inspection: Running load tests, safety governor checks, and smooth-ride calibration before handing over the system. Cost including for Replaced All Required Material, like Power Cabling, Car frame, & All Required Component etc & disposal of unserviceable material and stacking of serviceable material. including dismembering ,disposal of unserviceable materials with all lead and lift.etc. Work done for Any Height with necessary labour, tools, scaffolding, platforms, props, ropes, pulleys Etc As per Directed |
| 116 | Removal & Re installation of Existing STP As per Required as bellow Specification. Existing STP Removal and re installation should be carried out by a qualified contractor, safe handling of the machinery, and inspection/testing before the STP is used again. Cost including for Replaced All Required Material, l & All Required Component etc & disposal of unserviceable material and stacking of serviceable material. including dismembering ,disposal of unserviceable materials with all lead and lift.etc. Complete As per Directed. |
| 117 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 118 | Supplying, stacking and spreading of good earth at site including royalty and carriage up to 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). including to loading , unloading and transport etc. |
| 119 | Supplying , stacking and spreading sludge / well decayed farm yard manure from the source approved by the engineer in charge incl. screening, loading, unloading, conveyance and stacking at site. |
| 120 | Mixing earth and manure or in proportion specified or directed, Spreading of dung manure or / and good earth in required thickness. and fine dressing the ground as per natural gradient/ slope provided by the landscape architect |
| 121 | Lawn plantation Selection : In rows 1 to 2 cm apart in either direction including watering, fertilizing and maintenance of the lawn for 2 months or more till the grass form a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately) . Maintaining the grass for the period of two months in a presentable condition involving all the operations of de-weeding , application of chemical fertilizer, watering, mowing ,rolling etc. |
| 122 | Plumbing & Sanitary Work : Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. Pan Model KOHLER-K-16717IN-SS-0 or equivalent in white colour with outlet connector (k-1046327-s) , on approved type of chairs,Concealed flushing cistern Model No.Geberit Omega Concealed Cistern with Flush plate or Equivalent or Equivalent as directed,C.P health faucet Model No. JAQUAR-ALD-557 or Equivalent with required length of flexible tube, clamp and bracket for fixing to wall,15 mm C.P. brass heavy quality angle stop cocks Model No.JAQUAR-JAQUAR-ALI-85053 or Equivalent for flushing cistern,C.P. brass 2-way bib cock Model No. JAQUAR-OPP-15041PM or Equivalent,CP Toilet paper holder Model JAQUAR-ACN-1151N or Equivalent,Solid bakelite water closet cover and seat with C.P. hinges and rubber buffers,Fixing W.C. unit with brackets and accessories in position,Necessary pipe connection to PVC / PP / CI soil pipe,Painting bracket with two coats of white enamel paint over a coat of primer. (Final Model of fixture to be selected by architect) |
| 123 | Supply, checking, storing and fixing Under Counter wash hand basin MODEL:K-2215IN-2-0 or equivalent ith ,32 mm heavy plated C.P. waste coupling JAQUAR-ALD-729 or equivalent fitting with pop-up,32 mm heavy plated C.P. bottle trap JAQUAR-ALD-769L250x190 or equivalent with cleaning eye with extension piece and wall flange,Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet K-5683IN-4ND-CP or equivalent with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure. (Final Model of fixture to be selected by architect) |
| 124 | Supply, checking, storing & fixing C.P. brass towel ring MODEL:JAQUAR-ACN-1121BN or equivalent Round to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required . (Final Model of fixture to be selected by architect) |
| 125 | Supply, checking, storing & fixing C.P. brass angle valve for basin & Sink MODEL:JAQUAR-ALI-85053 or equivalent, of approved quality conforming to IS:8931 for a) 15mm Nominal Bore (Final Model of fixture to be selected by architect) |
| 126 | Supply, checking, storing & fixing C.P. brass bib cock MODEL:JAQUAR-ALI-85037 or equivalent of approved quality conforming to IS:8931.(Final Model of fixture to be selected by architect)a) 15mm Nominal Bore |
| 127 | Supply, checking, storing & fixing of Heavy class S.S. Grating Model No. Chilly-CCT-SFC-127 or Equivalent with Mosquito /Cockroach proof S.S. strainer of approved design by Interiror including setting in floor with cement motor to match with floor finish as per architect requirement suitable for FD (Floor drain) and FT (Floor trap). Note : Size of trap is vary as per final Product Selection. |
| 128 | Receiving, checking, storing & fixing Stainless Steel Body Auto hand drier Model No . Jaquar-HDR-SAP-M99ACS or equivalent to be operated with 220 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required complete as per instructions of the engineer-in-charge.(Final Model of fixture to be selected by architect) |
| 129 | Supply, checking, storing & fixing CP Over Head Rain shower MODEL:JAQUAR-OHS-35497 or equivalent complete as per instructions of the engineer-in-charge. |
| 130 | Supply, checking, storing & fixing CP single lever wall mixer MODEL:K-72290IN-4FP-CP or equivalent with Concealed body Shower Valve & Bath spout K-99061IN-CP complete as per instructions of the engineer-in-charge. |
| 131 | Soil Waste And Vent Pipe : Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet & Shaft).40 mm |
| 132 | Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet & Shaft). 75 mm |
| 133 | Supply,Installation,testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl,Access pipe for claening in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars,expansion joints,Y branches, hangers etc. as per the specification,drawings and schematics. All hangers, clamps, brackets,anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet & Shaft).110 mm |
| 134 | Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. |
| 135 | Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 110mm size P trap (Floor trap) of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. |
| 136 | Supply , installation , testing and commissioning Polyproplene (PP) 110mm x 75mm size Multi floor trap/Height riser of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. ( In sahft ) |
| 137 | Internal Water Supply : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex)20 mm dia Pipes ( SDR 11 ) |
| 138 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 25 mm dia Pipes ( SDR 11 ) |
| 139 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 32 mm dia Pipes ( SDR 11 ) |
| 140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 40 mm dia Pipes ( SDR 11 ) |
| 141 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 50 mm dia Pipes ( SDR 11 ) |
| 142 | Providing, fixing, jointing and testing in position the following U-PVC pressure threaded Pipes as per ASTM D 1785 Schedule 80 and threaded conforming to IS:554. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 15 Kg/Sq.cm. Fixing at wall/ ceiling level supported by clamps, fastener, hangers etc. as per specification. Cutting hole in wall / floor slab and making good the same with cement concrete 1:2:4 complete as required. GI heavy class pipe sleeve of larger diameter shall be provided wherever the pipes crossing the walls/floor slab and sealing the sleeves as per consultants requirement. Threading, jointing & making proper connections & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Water Supply Riser & Main Ring) (make:Astral,Ashirvad & supreme) 65mm dia |
| 143 | Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 32mm dia |
| 144 | Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 40mm dia |
| 145 | Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 50mm dia |
| 146 | Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.(Make:Sant,Zoloto,leader) BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. 65 mm dia. |
| 147 | Providing and Laying Underground drainage System Foam Core SN8 pipe complete with all fittings excavation of trench 0.7m wide and depth varying from 0.75m to 2.4m , and refilling the same after laying of drain and concrete encasement in concrete 1:3:6 grade concrete with minimum thickness of encasement 100m thk & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Make:Supreme,Astral or equivalent ) 150 mm dia |
| 148 | Providing and Laying Underground drainage System Foam Core SN8 pipe complete with all fittings excavation of trench 0.7m wide and depth varying from 0.75m to 2.4m , and refilling the same after laying of drain and concrete encasement in concrete 1:3:6 grade concrete with minimum thickness of encasement 100m thk & as per provided drawings by architect,techincal specification and as directed by the authority EIC.(Make:Supreme,Astral or equivalent ) 200 mm dia |
| 149 | Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mmx300mm size (inside) with standard weight.(i)Square mouth traps.(B)150mm x 100mm size P or R type |
| 150 | Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (1) A-type depth 0.90 meter for 150 mm diameter sewer. |
| 151 | Constructing manhole with R.C.C top slab in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrte 1:3:6 mix (1 cement : 3 coarse sand : 6 brick bats 40 to 50 mm nominal size) inside plastering 15 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making channels in cement concrte 1:2:4 mix ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) finished smooth complete including curing & testing (I) Inside size 900 mm x 1200 mm and 1.50 meter deep including FRC cover with frame size 560 mm diameter (A) with 230 mm thick walls of brick masonry using bricks having crushing strength not less than 35 Kg / Sqcm in cement mortar 1:5 (1 cement : 5 coarse sand) (2) B-type depth 1.50 meter for 300 mm diameter sewer. |
| 152 | Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (more than 10 ton) |
| 153 | Extra rate for constructing B.B masonry for every additional depth 0.10 meter or part thereof over item 24.27 (I) for depth from 0.90 meter to 1.50 meter. |
| 154 | Extra rate for constructing B.B masonry for every additional depth 0.10 meter or part thereof over item 24.27 (II) for depth from 1.50 meter to 2.25 meter. |
| 155 | Electrical Work : Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SINGLE POLE |
| 156 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DOUBLE POLE |
| 157 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. TRIPLE POLE & NEIUTRAL |
| 158 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 159 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 160 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.125 A, 16 KA,TPMCCB |
| 161 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 250 A, 25 KA,TPMCCB |
| 162 | Providing and fixing M.V. danger notice plate of 200mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides,and with inscription in single red colour on front side as required. |
| 163 | Providing and fixing H.T. danger notice plate of 250 mm x 200mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. |
| 164 | Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 165 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 166 | Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 167 | Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked flush type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete |
| 168 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(A) 4 core 2.5 Sq. mm |
| 169 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 4 Sq. mm |
| 170 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(C) 4 core 6 Sq. mm |
| 171 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) |
| 172 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) |
| 173 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) |
| 174 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) |
| 175 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 4 Core 4 Sq. mm / 4 core 2.5 Sq. mm (4 lux and 1 Earthing) (33+(8+1)*5) |
| 176 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 4 Core 6 Sq. mm (4 lux and 1 Earthing) (38+(8+1)*5) |
| 177 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 4 Core 10 Sq. mm (4 lux and 1 Earthing) (47+(13)*5) |
| 178 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 3 & 1/2 core 25 Sq. mm (3 lux and 1 Earthing) (66+(15)*4) |
| 179 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 3 & 1/2 core 35/50 Sq. mm (3 lux and 1 Earthing) (75+(20)*4) |
| 180 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 3 & 1/2 core 120 Sq. mm (3 lux and 1 Earthing) (139+(45)*4) |
| 181 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 3 & 1/2 core 185 Sq. mm (3 lux and 1 Earthing) (236+(80)*4) |
| 182 | Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (D) Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm Thickness, Loading 15 Kg./Mtr. |
| 183 | Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (E) Width - 200mm, Pultruded “C” Channel with 40mm Sides 4mm Thickness, Loading 25 Kg./Mtr. |
| 184 | Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (F) Width - 300mm, Pultruded “C” Channel with 50mm Sides 4mm Thickness, Loading 30 Kg./Mtr. |
| 185 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (A) with medium class Rigid PVC pipe and accessories Wire : (a) 2 wire 1.5 sq. mm |
| 186 | Additional Wire : Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (A) with medium class Rigid PVC pipe and accessories Wire : (b) 2 wire 2.5 sq. mm |
| 187 | Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete |
| 188 | Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III |
| 189 | Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III |
| 190 | Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories Cat.III |
| 191 | Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III |
| 192 | Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III |
| 193 | Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling.(b) Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness |
| 194 | Computer : Power Plugs 1 no. universal plug-switch combined + 1 Nos swithc for Below table 2 nos. 6A 5 pin Plug as below Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type accessories Cat. III + Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete Cat.III |
| 195 | Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (g) 4 wire 4 sq. mm |
| 196 | Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm |
| 197 | Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall be approved by Engineer in Charge] (B) 1200 mm Sweep (48\\") |
| 198 | Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation with necessary 24/ O.20, 3 core flexible wire without leakage With earthing. |
| 199 | ELW 15.00 : Light Fixtures and FansSupplying and erecting, testing and commissioning of Recessed Mounted Direct Light 10 Watt Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 75mm - H : 90 MM - C : 69mm MAKE : Nirvana make - NL-0134 or as per apporved make list. |
| 200 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 12 Watt deep led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 78mm - H : 86 MM - C : 72mm MAKE : Nirvana make - NL-0135 or as per apporved make list. |
| 201 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 15 Watt led Spot AG IP 54 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 100mm - H : 75 MM - C : 90mmMAKE : Nirvana make - NL-1170 or as per apporved make list. |
| 202 | Supplying and erecting, testing and commissioning of Surface Mounted 08 Watt led Down light AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 60mm - H : 112 MM MAKE : Nirvana make - NL-1129 or as per apporved make list. |
| 203 | Supplying and erecting, testing and commissioning of Recessed Mounted Direct Light 36 Watt led Spot AG IP 20 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 150 mm - H : 160 MM - C : 125mmMAKE : Nirvana make - NL-0421 or as per apporved make list. |
| 204 | Supplying and erecting, testing and commissioning of Surface Mounted down Light 15 Watt led Spot AG IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 , DIA 82 mm - H : 162 MM MAKE : Nirvana make - NL-4044 or as per apporved make list. |
| 205 | Supplying and erecting, testing and commissioning of Recessed Mounted 6 Watt LED FOOT MARKER, IP 65 3000K, Die Cast Aluminium , PMMA CLEAR Lens , CRI 90 , Osaram / Ltech make Driver THD<10% / 700 MA CREE COB LED , Efficacy System IM/ watt - 70 , Beam Angle : 22 / 24 / 33 MAKE : Nirvana make - NL-4210 or as per apporved make list. |
| 206 | Supplying and erecting, testing and commissioning of 20W LED TUBE LIGHT - IP20 |
| 207 | Supplying and erecting, testing and commissioning of 12W / mtr led strip IP20 indoor with profile 16x12 with driver (for 10mtr) Osaram / Ltech make Driver THD<10% |
| 208 | Supplying and erecting, testing and commissioning of Indoor integrated 36W LED IP65 Wall Washer beam angle 20ᵒx50ᵒ ,CRI>90, MacAdam<3sdcm, CCT-3000, IK-10, D :1000 mm - H : 85 MM - C : 43mm(Extended Aluminium with Toughened glass silicon gasket seals mounting-surface mounting) Finish : grey MAKE : Nirvana make - NL-4073 or as per apporved make list. |
| 209 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with 12W LED lamp - For In Sute rooms Living room - HL-1 As per Quotation from Light Inside or as per sample apporved by Architect. |
| 210 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - Ground floor Restaurant area - HL-3As per Quotation from Light Inside or as per sample apporved by Architect. |
| 211 | Supplying and erecting, testing and commissioning of Decorative Hanging Light with LED lamp - 2nd floor Banquet hall area - HL-6 (2.4 x 1.8 mtr x 1.5mtr (height) As per Quotation from Light Inside or as per sample apporved by Architect. |
| 212 | Supplying and erecting, testing and commissioning of Decorative wall bracket Light with LED lamp -All Guest room bedside - BL-3As per Quotation from Light Inside or as per sample apporved by Architect. |
| 213 | Supplying and erecting, testing and commissioning of Decorative Floor Lamp with foot switch with LED lamp - Guest room Floor LampAs per Quotation from Light Inside or as per sample apporved by Architect. |
| 214 | Supplying and erecting, testing and commissioning of Decorative Table Lamp with inbuilt switch with LED lamp - Guest room table Lamp As per Quotation from Light Inside or as per sample apporved by Architect. |
| 215 | Supplying and erecting, testing and commissioning of Skirting light with LED lamp - Guest room - NL1 As per Ligrand price list |
| 216 | Supplying and erecting, testing and commissioning of 4.53mtr - 36W / mtr LED surface mounted muilti LED Flexible strip light with 35 x 35mm size aluminium extrudesd housing and dot less diffuser, CRI>90 macdm < 3 sdcm, CCT 3000K, IK10 Fixture should be complete with required Osaram / Ltech make Driver, driver should be THD<10%. MAKE : Nirvana make - NL-5021 or as per apporved make list. |
| 217 | Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with necessary accessories . The size of pole and type of installation with foundation as per manufacturer details and site requirement are as below . [D] Overall length of 4 Mtr. Average Thickness: 7mm.Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base) Anchor Base (Size 250X250 & 12mm th.) |
| 218 | Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia)(A) Single arm bracket |
| 219 | Supplying & erecting Earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. [c] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc. Length of Pipe : 3 Mtrs. Back filling Compound :2 nos Bags of 25 Kg. |
| 220 | Supplying & erecting Earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency. [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc. Length of Pipe : 3 Mtrs. Back filling Compound :2 nos Bags of 25 Kg. (b)For Electrical installation up to 11 kV in normal soil.Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg. |
| 221 | Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 1.626mm.( 8 to 16 SWG.) |
| 222 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (8) Computer RJ-45 socket |
| 223 | Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch memory (min.6 nos.)& 99 memories with display system Single line [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] |
| 224 | Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT - 6 |
| 225 | Supply, Installation, Testing & Commissioning of 5 Megapixel HD Dome Camera, HD1080p,1/2.7\\" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT |
| 226 | Supply, Installation, Testing & Commissioning of 2 Megapixel HD Dome Camera, HD1080p,1/2.7\\" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT |
| 227 | Supply, Installation, Testing and Commissioning of 16-Channel Digital Video Recorder recording with 4TB HDD with all require installation and integration with all camera system, 16 Turbo HD input, 16-ch video&1-ch audio input, 2 SATA interface,1280×720P: 25(P)/30(N) fps/ch, 380 1U caseW/O HDD with all require software |
| 228 | Supply Installation, Testing and Commissioning of 32\\" Full HD LED monitor with Power Cord complete as required & necessary video cards complete as required (if required). Make - Sony, Samsung, Philips |
| 229 | Supply, Installation, Testing and Commissioning Power Supply for Camera |
| 230 | Supplying & Laying 24U Wall mounted Rack for the CCTV DVR installation with all require power ports fixed wall rack has a tempered glass door and removable locking side panels. Included with this rack is one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables. |
| 231 | Supplying and erecting wall mount speaker with rated power of 30 watt/power tapping 30/15/7.5 watt available,opening angle 180 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz (Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] |
| 232 | Supplying & erecting dual channel amplifier ,power handling capacity of 180 watt ,four micro phone inputs with independent level control ,built in FM tuner,with preset memories,USB drive & SD card for MP3 playback ,100v /telephone input with priority and VOX,frequency response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated power up to 50 units (Approved by Competent Authority i.e. not Below the rank of Executive Engineer) |
| 233 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII –1985 (VdS approved) or NFPA72 ( UL/ULC/FM approved) with Latest ammendment complete with mounting base complete as required. |
| 234 | Supplying, installation, testing & commissioning of addressable horn cum strobe having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required. |
| 235 | Supplying, installation, testing & commissioning of addressable manual call point having IS or BS (EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment complete as required. |
| 236 | Supply, laying, testing and commissioning of twisted pair 2x1.5sq.mm Copper Armored 650V grade shielded XLPE insulated Fire Rate cable |
| 237 | HVAC Work :(ODU) Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39 0C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40nd <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building) For Cooling or Heating or Both |
| 238 | Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System : 4TR |
| 239 | Supplying, Installation, Testing and Commissioning of following minimum capacity Single way wall/corner VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor): 2.0 TR |
| 240 | Supplying, Installation, Testing and Commissioning of following minimum capacity Single way wall/corner VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoorunits must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor): 1.6 TR |
| 241 | Supply, installation, testing and commissioning of following minimum capacity 4-way/2 way/radial flow as per approval VRV Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, max noise level 60dB @ 400 cfm per TR(minimum) complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature fresh air provision compatible for Remote Operation System : 3.6TR |
| 242 | Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted high ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The coolingcapacity of indoor unit will be at air inlet conditions of 27 0CDB and 19 0C WB temperature. (Make will be same as of 5.5TR |
| 243 | DUCTABLE TYPE SPLIT UNITS Supplying, Installation, Testing and Commissioning of air cooled ducted split type air conditioning machine with each having a capacity and details as mentioned below suitable for operation on R 32/R-410A /R-407 Green refrigerant comprising of Scroll type compressor hermatically sealed complete with automatic capacity, safety switches,lubrication system with min 5 year (OEM) warranty for both compressor and Printed Circuit Board (PCB) , Suitable capacity squirrel cage induction motor having class 'B'insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine Isolation / disconnect switch, valves and accessories to inter connect compressor andcondenser including pressure testing, vacuum. Necessary starters suitable for Indoor & outdoor unit complete with O/L ,U/V, phase reversal protection, single phase preventors i/c copper conductor control and power cable and drain pipe of suitable size and length etc complete as required. The total cooling capacity/heating capacity oftested unit shall have a capacity as per relevant IS code. The lab testing reports as per IS: 8148 shall be submitted 16.7 TR |
| 244 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (A) 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 245 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (B) 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 246 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (C.) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 247 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (D) 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 248 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 249 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (F) 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 250 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (G) 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 251 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (H) 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 252 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (I) 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 253 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (J) 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 254 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (K) 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 255 | Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required : (L) 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation |
| 256 | Supply installation testing commissioning Shielded Control Cables for VRV System with necessary ISI mark Medium class rigid PVC pipes with necessary accessories with termination in machine and control equipments.. (A) 2C X 1.5 Sq mm Shielded Armoured |
| 257 | Providing, fixing, testing & commissioning of Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation. A 50MM |
| 258 | Providing, fixing, testing & commissioning of Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.D 25MM |
| 259 | Fire Fighting Work : Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25MM |
| 260 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32mm |
| 261 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :40mm |
| 262 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50mm |
| 263 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:65mm |
| 264 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80mm |
| 265 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:100mm |
| 266 | Providing and fixing 80 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation |
| 267 | Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation |
| 268 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 269 | Supplying and fixing First-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 Meter |
| 270 | Supplying and fixing First-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40 Meter |
| 271 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : GUN METAL |
| 272 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make. |
| 273 | Supplying and fixing of Fire brigade connection of cast iron body with Gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe |
| 274 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler |
| 275 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler |
| 276 | Fixed Furniture, False Ceiling, Wall Paneling, Curtain Etc.: Providing and fixing Gypsum False ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45 x15 x 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffuser, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge Gypsum moisture resistant board. (Cost including For suspended from RCC Ceiling /Roof, Floor Protection covering , Light cutting gala & also including Scaffolding & Working Platform for any height) |
| 277 | Providing & Fixing of Veneer Finished Wooden Ceiling ( Groove Pattern ) Making from 12 mm thick Plywood (IS 710 ) as per drawing & instruction of EIC/Consultant & Approved Sample(complete with Aluminium frame work 50mm x 50mm x 1.6mm thk 600mm x 600mm C/C both way as per Drawing ).Ceiling finish with 12mm Specified Plywood with + 4mm thk MDF board and 4mm thk Approved veneer with melamine polish finish. Plywood shall be fixed with required Aluminium fabrication work with all necessary accessories & Hardware. Rate shall include cost of making of all cutouts for light fixtures, gadgets,pelmets, grooves,including For suspended from RCC Ceiling /Roof, light cutting gala & also including Scaffolding & Working Platform for any height .The rate shall be in Sq.Mt for all floors and at all heights (including all costs the sample mock (2.0mt x2.0mt) of the frame work and Complete ceiling) shall be approved from Consultant.5mm Groove shall be provided at the junction of the false ceiling & the wall. completed as per as per drawing & instruction of Consultant Engineer-In-charge. |
| 278 | Providing & fixing Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100 x 50 x 3600mm in powder coated to Wood grain finish – Red Oak & Cherry. The baffle blade shall be suspended using Slotted U-profile of 20 x 30mm at on-center spacing 100mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter Fixed with End caps. Installation of Baffles : Locate the slot for Baffle Hangers in U Profile section at 1200mm centers. Hangers are inserted into the slot, and then inserted in the provision in the Al baffle. Two baffle hangers are required one on each side of the U-profile to hold the Al baffle in its place. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation to be carried out by Trained Installation team & Installation should be carried out as per recommended procedure. including For suspended from RCC Ceiling /Roof, & also including Scaffolding & Working Platform for any height .The rate shall be in Sq.Mt for all floors and at all heights (including all costs the sample mock up shall be approved from Consultant(Metalium or equivalent Make) |
| 279 | Providing & Fixing of Interlocking PVC Ceiling Making from 12 mm thick non-reflective surface of matte PVC Panels with PVC U-trims as per drawing & instruction of EIC/ Consultant & Approved Sample. Panel Width 250 to 300mm & Length 3000mm with Base of Unplasticized polyvinyl chloride (uPVC) or rigid PVC compounded Material with groove interlocking system for seamless flush or V-groove edges & Panel Shall be wood grains Finish as per Approved by Consultant. Installation with Aluminium frame work 50mm x 50mm x 1.6mm thk 600mm x 600mm C/C both way as per Drawing ).Ceiling finish with 12 mm thick non-reflective PVC Panel as per Approved Rate shall include cost of making of all cutouts for light fixtures, gadgets,pelmets, grooves,including For suspended from RCC Ceiling /Roof & also including Scaffolding & Working Platform for any height .The rate shall be in Sq.Mt for all floors and at all heights (including all costs the sample mock (2.0mt x2.0mt) of the frame work and Complete ceiling) shall be approved from Consultant..completed as per as per drawing & instruction of Consultant Engineer-In-charge. |
| 280 | Providing & fixing 40mm thk Jamb Line Paneling (19mm+19mm+4mm Veneer) Veneer Finish (100mm to 250mm Wide & 40mm thk) Jamb line to consist of 19 mm th +19mm thk Marine plywood Finished with 4mm Thk Approved Veneer Fnished in Melamine polish & Border Seal with Teak wood /or Veneer Cladding with Melamine polish with required frame work / teak wood beading patty & Grove pattern at wall surfaces, ceiling surfaces,Partition edge as per required & suggested Area.Cost including for All necessary hardware & polishing work complete as per Directed by Eng- in - charge. (Measurement mode Running Meter Basis of the finished work) |
| 281 | Providing & fixing 12mm th.Wall Paneling (Veneer Finish) to consist of 12mm Marine Ply + 4mm MDF + 4mm Veneer)12mm Ply Marine plywood Finished with 4mm Thk Approved Veneer with melamine polishon backing of 4mm MDF For Groove Pattern. with required frame work & teak wood beading patty etc. Paneling on wall surfaces, Partition edge etc as per required & suggested Area.Cost including for All necessary hardware & Melamine polishing work complete work done as per Drawing or Directed by Eng- in - charge. |
| 282 | Providing & fixing 19mm thk .Wall paneling (Veneer Finish) to consist of 19mm Marine Ply + 12mm MDF + 4mm Veneer)19 mm th plywood finished with 4mm Thk Veneer & melamine polish with required frame work with teak wood beading patty & 12mm plywood backing grove pattern at wall surfaces, Partition edge etc.as per required & suggested Area.Cost including for All necessary hardware & polishing work complete as per Directed by Eng- in - charge. |
| 283 | Providing and Fixing of Wooden Pelmet Veneer Finish made from 19 mm thick Approved Marine ply & 4mm thk Approved Veneer with Melamine polish with required Frame work for Support for fixing work as per drawing. Size of Pelmet up to 150mm/230 mm Width x 200 to 300 mm Ht L shape. Rate to be inclusive of lipping, cutting, wastage, necessary fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and approved sample etc Pelmet should also take load of all the all roller blinds. (Measurement mode in Running Meter Basis of the finished work) |
| 284 | Providing & Fixing of Fluted Panel Paneling on wall /Partition Surfaces consist 8 to 12mm Thk Teak Wood Fluted Panel 120mm to 300mm width & 3000mm Length (As per Selection of Consultant) Fixing on Wall surface or partition edge Backing of 12mm MDF with required Beading,Adhesive, Hardware etc with grove pattern as per suggested Area.Complete with All necessary hardware & Melamine Polishing work .Teak wood Fluted Panels Shall be As per Drawing or Selection of Consultant.(Measurement mode in Sq.Mt.Basis of the finished work) |
| 285 | Providing Material and Labour for Cladding of Polished/Brushed / Natural Split Finish Natural Moca Cream stone slab 18-20 mm (Average) thick Size as per Required (Stone as per Selection of Consultant) for RCC wall/ Brick wall/ Lift wall ,Openings, Elevation Cut-outs,etc. including Cutting in Required Size to parallel to the Horizontal/ vertical natural Vein.with full molded round / Flat edge fixing with Roff Master Fix Adhesive is a high-strength polyurethane epoxy-based adhesive. Complete work done with Groove Pattern , Side Border with Teak Wood or SS patti as per drawing (Measurement mode in Sq.Mt.Basis of the finished work) |
| 286 | Providing, Supplying and Fixing of 12mm thick Opaque Glass Partition made out 12mm thick Glass with edge frame fitting with male female with all necessary hardware. Hardware include with Nail, Screw,Adhesive, Door Closer, Hinges, Handle etc. as per requirement & Cost Including for12mm thick toughened Glass Door as per detail drawing or Engineer-in-Charge. |
| 287 | Providing & Fixing of Acoustic Panelling on Wall surface Or Partition Surfaces or Acoustic panels are constructed of high density 25 mm single composit Plain HD PET panels having 100% polyester fiber, with a minimum of 70% recycled content.Density: 3600 GSM Panel size: 2800 mm x 1200 mm BS 476 Part 6 (Fire Propagation ,BS 476 Part 7 (Surface Spread of Flame glass wool with resin hardened Edges.Complete work to give bubble free uniform surface.Any unevenness of the base surface shall be removed before fixing the Fabric.with 8mm /12mm SS 'C' Chanel as per Drawing. complete in all respects and the entire satisfaction of Engineer-in-charge. Rate including for 25mm thk Acoustic Panel as per approved by Architect. |
| 288 | Providing & fixing Decorative Planter Box Veneer Finish ( 200mm to 300mm wide & 450mm Ht ) Planter making from 19mm th Plywood with required teak wood & ply wood frame work as per detail & making niche for Applying Artificial plant , decorative Pebble etc , all External Surfaces of Planter finished with 4mm veneer with Melamine Polish & internal Surface of planter Box finished in 1mm Laminate with Edge seal with Laminate or Veneer as per Directed. including required Hardware etc Complete as shown in Drawing or as per directed by eng in charge. (Measurement mode : Sq.Mt. Basis of the finished work. Length x Height) |
| 289 | Providing & fixing of Artificial Green Grass Carpet Mat Medium Turf 35mm Thk. Mat shall be zero maintenance and high durability Polyethylene (PE) or polypropylene (PP) with UV-stabilized backing Material.Mat Shall easy to maintain for Dirt, Cleaning, washable etc. Complete Fixing as per Directed. |
| 290 | Providing & fixing of Curtain with French/3-pleated/pinch curtains of pleat depth 4 cm, @ 200 c/c, from ceiling to floor level, with PVC/ aluminium track, with PVC curtain hooks at the line of Each pleat, Complete as per design and/or as directed by the Architect (Base cost of cloth Rs.800/R.Mt) |
| 291 | Providing Supplying and fixing in position of 6mm thick Mirror fixed on 12mm thick BWP ply fixed on aluminium framework of required section and thickness. Mirror to have frosted slit at vertical light coves. mirror to have Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per directed. (Mirror shall Removable or Fixed Mirror ,Size as per Drawing Minimum 750mm x 1000mm) |
| 292 | Providing and fixing Printed Vinyl with Lamination Graphic design, 3M Make complete as per suggestion of Architect/Client. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sq m minimum of glass film) , Design shall be approved from Architect/Client. |
| 293 | Loose Furniture & Room Accessory : Ground Floor (Entry,Business Lounge) : Providing & Fixing & Erecting of Reception Table size 2440mm x 750mm x 900mm ht and shape as per drawing. Table top Made from 25mm th.BWP Grade 710 Plywood & Fixing of 18mm Italian Marble as per approved shade. with inbuilt Frame work as per drawing & 18 mm th.verticals side.finished with veneer & table also Provide Drawer box made from 18mm thick Ply with Veneer as sides on 6mm th ply as backing. Table shall have drawer of 100mm wide on top level & back side and bottom to be provided with 12mm th. ply Drawer to be lockable and sliding on Approved drawer channels Drawer box size (450mm X 450mm X 300mm) consisting of 100mm wide 2 Nos. of drawer.(As per drawing) & also Made apron of 18mm th Marine Ply BWP Grade 710 with Teak wood Panel shall be finished with veneerwith PU Polish & Partly 18mm Italian Marble Cladding as per design including storage unit made using 18 mm ply. All exposed edges to be sealed with 4mm veneer & all exposed work veneer finished with PU polish Complete as per the drawing and design or as directed by Engineer-in Charge/Designer.All exposed wooden edges to be sealed with Veneer with Pu Polish / Carving Patty, Paneling etc as per Directed with all necessary hardware like drawer handle, locks etc.Complete as per Drawing . |
| 294 | Reception Table Chair Made from Teak wood Frame & Crafted Legs & Contoured seat design upholstered with breathable fabric All Teak Member with melamine polish as per Directed.Complete as per Drawing. |
| 295 | Providing Supplying & fixing of Two seated Sofa Made from Teak wood Frame & 18mm thk Marine Ply as per drawings and design with with High density foam and approved shade fabric, the structure to be made out of BWP Grade 710 Plywood carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 1800mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 296 | Providing Supplying & fixing of Single Seat Sofa Made from Teak wood Frame & 18mm thk BWP Grade 710 Plywood as per drawings and design with High density foam and approved shade fabric, the Structure to be made out of BWP Grade 710 Ply wood carcass and expose part (Dacorative Crafted Legs, Visible Frame etc) will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 297 | Providing Supplying & fixing of Centre Table (750mm Dia x 450mm ht ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 298 | Providing Supplying & fixing of Single Seat Sofa Made from Teak wood Frame & 18mm thk BWP Grade 710 Plywood as per drawings and design with High density PU foam ,Polyester Fiber Sheet & Upholstery Fabric as per approved shade.the Structure to be made out of BWP Grade 710 Ply wood carcass and expose part (Legs, Visible Frame etc) will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 299 | Providing Supplying & fixing of Corner Table (900mm x 600mm x 450mm ht ) Made from Teak wood Carving Frame &Legs as per drawings and design & Fixing 12mm thk Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 300 | Providing ,Supplying and fixing of Crafted Round Cafe Table With Crafted Chair 4 seater (1200mm DiaTable +4 Nos Chair) Table shall 1200mm Dia as per Drawing & specification including erection at site. Table Top: 25 mm thk. BWP Grade 710 Ply Finished with 4mm Aproved Veneer, Melamine polish with Crafted Teakwood Edge band on all side. Table top at 750 mm height from floor level. Understructure : Teakwood Frame work With Teakwood Dacorative Crafted Legs with Melamine Polish. Complete as per Directed. Cost including for 4nos Chair Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. (cost for 1set of 4 Nos Chair & 1200mm Dia Table) |
| 301 | Providing ,Supplying and fixing of CafeTable (8 Seater) 3200mm x750mm x 900mm ht as per Drawing & specification including erection at site. Table top : 25 mm thk. BWP Grade 710 Ply Finished with 4mm thk Approved Veneer & side Made frome 25mm thk Plywood with 4mm th.Veneer with Melamine Polish Teakwood Edge band on all side. Table top at 900mm height from floor level. Understructure made from Teakwood Frame work with Cladding 18mm Plywood & 4mm Veneer with melamine Polish All exposed part cladding with 4mm Veneer with Melamine Polish.Complete as per Drawing oras per Directed.Cost including for 8 nos Chair Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. (Cost for 1set of 8 Nos Chair & 1Table) |
| 302 | Providing & Fixing of Bar Counter Cabinet Made from 18mm th. Approved Ply wood with required Frame work finished with 4mm th Approved Veneer from outside & All internal Surfaces to be finished in 1 mm thk Laminate. Counter Top 18mm BWP Grade 710 with Fixing of 6mm Corian Premium finishes as per Drawing.Internal part of cabinet made from 18mm BWP Grade 710 Verticals 18mm th band for supporting & Shelves with laminate finish as per drawing . internal side of Counter Made Storage cabinet with Shutters, Drawers & Open shelves as per Drawing & shutters , drawers will have individual locking arrangement ,necessary Teak wood beading patch ,Carving edge etc.complete with necessary hardware like SS mat finish handles/ ball catch,drawer channel of approved make complete as per as shown in the drg. Counter to have Two levels customer and Service Provider. Top In 25mm thk.BWP Grade 710 finish with approved 6mm thk.Corian with Smooth Surface with Buffing & Customer top in 25 mm thk BWP Grade 710 With Both side 6mm corian ledge supported with decorative SS bars.or Teak wood Crafted /Carving Support. front & Side of Counter finished in approved 4 mm thk Veneer with melamine Polish . All exposed wooden edges to be sealed with Veneer with Polish / Carving Patty, Partly Corien Cladding, Fluted Paneling etc as per Directed with all necessary hardware and accessories as required. Also Provide Essential Under-Counter Components Ice bins & Drainboards: Standardized heights (750mm) with added front-mounted speed rails (typically 5 inches deep). Refrigeration System Kegerators and back bar coolers are typically sized in 600 to 740mm depths., Standard 3-bin compartment sink with adjacent drainboards etc As per Directed. (Size Higher Level Top Length 7000mm (4600mm+1200mm+1200mm) x 450mm x1200mm Height & Lower Level Ledge Top Size L4600mm x W 300mm at 900mm Height) Measurement mode Complete work done in Sq. Mt. Unit Total Length x Height.All Including for Internal Storage, Front Ledge etc |
| 303 | Providing , Fixing & Erecting Full Height Display cabinet (Back of Bar Counter) (L4600mm x W450mm to 600mm deep x 2400mm ht) Display cabinet made from 18mm th. Approved Ply wood finished with 4 mm thk Veneer with Melamine Polish from all Exposed surfaces with all required Teak wood Beading, Frame work etc with Melamine Polish & in side of storage verticals made from 18mm Ply with 4mm thk.Veneer with Melamine polish as approved shade & Partly Part of Cabinet making Shutters with powder coated Profile shutter with Glass & Partly Part of cabinet making Open Cabinet as per Drawing , Shutter operated on auto closing hinges, 12mm thk Toughened Glass to be providing for self with edge Polish as per detail . Cabinet will have individual locking arrangement & necessary hardware like SS mat finish handles/ ball catch etc.Complete as shown in the drawing & All exposed wooden edges to be sealed with Veneer with Polish / Carving Patty, Partly Corian Cladding, Fluted Paneling etc as per Directed with all necessary hardware and accessories as required.complete in all respects and the entire satisfaction of Consultant , Engineer-in-charge. |
| 304 | Providing Supplying Bar Stool with Back Made from Teak wood Frame , Crafted Legs & 18mm thk Approved Ply in seat as per drawings and design with commercial density foam, structure to be made out of BWP Grade 710 carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. (Size 600mm x 450mm x750mm ht) |
| 305 | Providing & Fixing of Full Height Book Shelf Cabinet Veneer Finish(2030mm Ht & 600 to 650mm deep) cabinet made from 18mm th. Plywood finished with 4 mm thk Veneer with Melamine Polish from all Exposed surfaces with all required Teak wood Beading, Frame work etc & internal side of storage made from 18mm Plywood with 4mm Thk Veneer with Melamine polish as approved shade. 18mm th Plywood to be providing for self with top & Bottom Veneer cladding with Melamine Polish & 18mm th Vertical supporting for Book Shelf with 4mm Veneer with melamine polish.Internal Parts of cabinet as per Drawing. Visible Vertical Side & Horizontal Shelf shall be shown up to 44mm thk as per Drawing .& also Provide Partly shutters as per Drawing.Shutters Made from Aluminium Profile 55mm / 68mm width Anodized Silver ,Brushed Finished with 8mm Clear Glass As per Directed by Engineer in Charge. Shutter operated on auto closing hinges ,individual locking arrangement & necessary hardware complete in all respects and the entire satisfaction of Consultant or Engineer-in-charge. |
| 306 | First Floor (Executive Suite Room) : Providing Supplying and Fixing of Double Bed (Including Side Table & Bed back Head board Paneling) Size:-1980mm x 2030mm as per Drawing. The bed made out of 18mm thick BWP Grade 710 base, vertical side portion made out of teak wood and Sheashem wood as per detail drawings given at the time of execution. Bed make out of with BWP Grade 710 Plywood Structure & Solid wood , External side of Bed is Solid wood,Fabric,Veneer with PU or Melamine polish. & Storage and Shutter are not applicable. Hardware is from Haffele or Hettich, Ebco.Complete with Finishing. all wooden surface finish with Polish work as per instruction of Engineer In Charge. Cost Include For 2 NosSide Tables & Head Board Paneling & Bed Runner Complete as per Directed . (II) Side Table For Double Bed (Size 600mm x 450mm x 450mm Ht) as per drawing. Side Table top made from 18mm thk BWP BWP Grade 710 Finished with 4mm Veneer & Melamine polish./ or 6mm thk Corian Top .The side table`s will having one drawer unit (soft close telescopic channel) with bottom side fixing of 75mm height skirting and above side table fixing of 12mm thick BWP Grade 710 Plywood Panelling (150mm x 500mm) with veneer finish with fitting of required hardware, material & labour etc work completed as per detailed drawings. Legs of table are considered Teak wood Crafted decorative Legs ,with Melamine Polishing (Side Table Matching with Doubled Structure)(III) Providing Supplying and Fixing of Headboard made out from 12mm Thk.Approved BWP Grade 710 ply with Required Frame work & fixing of approved shade Fabric with required stitching work with fitting of required hardware, (Size: 2100mm x 2200mm as per Drawing.(Basic rate of Fabric Rs.950/-per Mtr) (v) Providing Supplying and Fixing of Bed front seating as per Image seating made out teakwood Crafted Frame & Crafted Legs with carving shape & Seat Made from 18mm BWP Grade 710 Plywood Structure with High density foam and approved shade fabric/leather all wooden surface finish with polish work as per instruction of Engineer In Charge.(Seating Size 1500mm x 450mm x450mm Ht or as per directed) |
| 307 | Providing & fixing of Ward robe Size as per Detailed drawings. Made from 18mm (18mm/12mm/06mm thick BWP 710 grade BWP Grade 710 ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making with 18mm BWP Grade 710 ply with Required Frame work as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one/ Two drawer (soft close telescopic channel), Shelves with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish material & labour etc work completed as per detailed drawings. (Size 2100mm x 600mm x 2200mm ht) |
| 308 | Providing Supplying & fixing of Working Table as per Drawing .Table shall Made from 18mm BWP Grade 710 ply Table top Required 25mm Thk with 4mm thk Veneer & Melamine Polish with with durable Teak wood /Sheesham wood Edge & Legs , Table shall Provide Drawer as per Image. Drawer Made From 12mm Approved BWP Grade 710 ply,Two Drawer as per Image (soft close telescopic channel) Complete as Per Directed. all external Surfaces Finished 4mm thk Veneer with melamine Polish.(Size 1200mm x 600mm x 750mm) |
| 309 | Providing Supplying & fixing of Chair For Working Table Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. |
| 310 | Providing & fixing of Minibar Cabinet Made with Crafted from durable Teak wood /Sheesham wood with BWP Grade 710 Ply accents, this mini bar cabinet offers longevity, strength, and natural wood grain charm.from (18mm/12mm/06mm thick BWP 710 grade Ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making teak wood Frame & BWP Grade 710 with Ply Required Shelf With both side Veneer Cladding finished with melamine polish as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one / Two drawer (soft close telescopic channel),Shelves With drawers,bottle racks, and glass holders,this compact cabinet is ideal for Traditional look with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish etc work completed as per Directed.(Size 600mm x 600mm x 750mm ht) |
| 311 | Providing Supplying & fixing of Two Seated Sofa Made from Teak wood Frame & 18mm thk Marine Ply as per drawings and design with with High density foam and approved shade fabric, the structure to be made out of BWP Grade 710 Plywood carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 1800mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 312 | Providing Supplying & fixing of Single Seat Sofa Made from Teak wood Frame & 18mm thk BWP Grade 710 Plywood as per drawings and design with High density PU foam ,Polyester Fiber Sheet & Upholstery Fabric as per approved shade.the Structure to be made out of BWP Grade 710 Ply wood carcass and expose part (Legs, Visible Frame etc) will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 313 | Providing & fixing of LCD Cabinet Box Panelling veneer finish (Executive Suite Room)The Cabinet Made out From 18mm thick BWP Grade 710 Ply with required cutting & Jointing work proper in line and level with outside fixing of 4mm thick approved Shade veneer finish with Edge ,side Pasting of veneer as per approved shade or matching with veneer with applying of approved shade melamine (Matt/glossy) polish on veneer. Also provide Exposed TW Beading, Carving Batten Etc with melamine polish.The TV unit`s panelling with having of niche as per detailed drawings with veneer finish with fitting of required hardware, material & labor etc work completed as per detailed drawings. (Size : L2850mm x H 2100mm including Low level Box Cabinet Size 2850mm x 325mm x 450mm Ht) |
| 314 | Providing Supplying & fixing of Lounge Chair (Two Chair & 1nos Center Table) Made from Teak wood Frame , Crafted Legs & 18mm thk Marine Ply at seat as per drawings and design with commercial density foam & upholstered with breathable fabric in seat &Loose Feather foam Back seat as per Image & Thread work Lining as per Image Cost including for 1 nos Centre Table 600mm x 600mm x 450mm ht . complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 315 | Providing Supplying & fixing of Center Table (750mm Dia x 450mm ht or 750mm x750mm x450mm ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 316 | Providing Supplying & fixing of Corner Table (600mm Dia x 450mm ht or 600mm x 600mm x 450mm ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 317 | Providing ,Supplying and fixing of Round CafeTable (4 Seater) 1200mm Dia x750mm ht as per Drawing & specification including erection at site. Table top : 25 mm thk. BWP Grade 710 Ply Finished with 4mm thk Approved Veneer with Melamine Polish Teakwood Edge band on all side. Table top at 750mm height from floor level. Mounted on Teakwood Frame work & Dacorative Crafted Legs with melamine Polish Complete as per Drawing or as per Directed.Cost including for 4 nos Chair Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. (Cost for 1set of 4 Nos Chair & 1Table) |
| 318 | Second Floor (V VIP Suite Room) : Providing Supplying and Fixing of Double Bed (Including Side Table & Bed back Head board Paneling) Size:-1980mm x 2030mm as per Drawing. The bed made out of 18mm thick BWP Grade 710 base, vertical side portion made out of teak wood and Sheashem wood as per detail drawings given at the time of execution. Bed make out of with BWP Grade 710 Plywood Structure & Solid wood , External side of Bed is Solid wood,Fabric,Veneer with PU or Melamine polish. & Storage and Shutter are not applicable. Hardware is from Haffele or Hettich, Ebco.Complete with Finishing. all wooden surface finish with Polish work as per instruction of Engineer In Charge. Cost Include For 2 NosSide Tables & Head Board Paneling & Bed Runner Complete as per Directed . (II) Side Table For Double Bed (Size 600mm x 450mm x 450mm Ht) as per drawing. Side Table top made from 18mm thk BWP BWP Grade 710 Finished with 4mm Veneer & Melamine polish./ or 6mm thk Corian Top .The side table`s will having one drawer unit (soft close telescopic channel) with bottom side fixing of 75mm height skirting and above side table fixing of 12mm thick BWP Grade 710 Plywood Panelling (150mm x 500mm) with veneer finish with fitting of required hardware, material & labour etc work completed as per detailed drawings. Legs of table are considered Teak wood Crafted decorative Legs ,with Melamine Polishing (Side Table Matching with Doubled Structure) (III) Providing Supplying and Fixing of Headboard made out from 12mm Thk.Approved BWP Grade 710 ply with Required Frame work & fixing of approved shade Fabric with required stitching work with fitting of required hardware, (Size: 2100mm x 2200mm as per Drawing.(Basic rate of Fabric Rs.950/-per Mtr) (IV) Providing Supplying and Fixing of Bed front seating as per Image seating made out teakwood Crafted Frame & Crafted Legs with carving shape & Seat Made from 18mm BWP Grade 710 Plywood Structure with High density foam and approved shade fabric/leather all wooden surface finish with polish work as per instruction of Engineer In Charge.(Seating Size 1500mm x 450mm x450mm Ht or as per directed) |
| 319 | Providing & fixing of Ward robe Size as per Detailed drawings. Made from 18mm (18mm/12mm/06mm thick BWP 710 grade BWP Grade 710 ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making with 18mm BWP Grade 710 ply with Required Frame work as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one/ Two drawer (soft close telescopic channel), Shelves with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish material & labour etc work completed as per detailed drawings. (Size 2100mm x 600mm x 2100mm ht) |
| 320 | Providing Supplying & fixing of Working Table as per Drawing .Table shall Made from 18mm BWP Grade 710 ply Table top Required 25mm Thk with 4mm thk Veneer & Melamine Polish with with durable Teak wood /Sheesham wood Edge & Legs , Table shall Provide Drawer as per Image. Drawer Made From 12mm Approved BWP Grade 710 ply,Two Drawer as per Image (soft close telescopic channel) Complete as Per Directed. all external Surfaces Finished 4mm thk Veneer with melamine Polish.(Size 1200mm x 600mm x 750mm) |
| 321 | Providing Supplying & fixing of Chair For Working Table Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. |
| 322 | Providing & fixing of Minibar Cabinet Made with Crafted from durable Teak wood /Sheesham wood with BWP Grade 710 Ply accents, this mini bar cabinet offers longevity, strength, and natural wood grain charm.from (18mm/12mm/06mm thick BWP 710 grade Ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making teak wood Frame & BWP Grade 710 with Ply Required Shelf With both side Veneer Cladding finished with melamine polish as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one / Two drawer (soft close telescopic channel),Shelves With drawers,bottle racks, and glass holders,this compact cabinet is ideal for Traditional look with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish etc work completed as per Directed.(Size 600mm x 600mm x 750mm ht) |
| 323 | Providing Supplying & fixing of Two Seated Sofa Made from Teak wood Frame & 18mm thk Marine Ply as per drawings and design with with High density foam and approved shade fabric, the structure to be made out of BWP Grade 710 Plywood carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 2100mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 324 | Providing Supplying & fixing of Two Seated Sofa Made from Teak wood Frame & 18mm thk Marine Ply as per drawings and design with with High density foam and approved shade fabric, the structure to be made out of BWP Grade 710 Plywood carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 1800mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 325 | Providing Supplying & fixing of Single Seat Sofa Made from Teak wood Frame & 18mm thk BWP Grade 710 Plywood as per drawings and design with High density PU foam ,Polyester Fiber Sheet & Upholstery Fabric as per approved shade.the Structure to be made out of BWP Grade 710 Ply wood carcass and expose part (Legs, Visible Frame etc) will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 326 | Providing & fixing of LCD Cabinet Box Panelling veneer finish (Executive Suite Room)The Cabinet Made out From 18mm thick BWP Grade 710 Ply with required cutting & Jointing work proper in line and level with outside fixing of 4mm thick approved Shade veneer finish with Edge ,side Pasting of veneer as per approved shade or matching with veneer with applying of approved shade melamine (Matt/glossy) polish on veneer. Also provide Exposed TW Beading, Carving Batten Etc with melamine polish.The TV unit`s panelling with having of niche as per detailed drawings with veneer finish with fitting of required hardware, material & labor etc work completed as per detailed drawings. (Size : L2850mm x H 2200mm including Low level Box Cabinet Size 2850mm x 325mm x 450mm Ht)01 Nos +1500 x 2200mm 03 Nos |
| 327 | Providing Supplying & fixing of Lounge Chair (Two Chair & 1nos Center Table) Made from Teak wood Frame , Crafted Legs & 18mm thk Marine Ply at seat as per drawings and design with commercial density foam & upholstered with breathable fabric in seat &Loose Feather foam Back seat as per Image & Thread work Lining as per Image Cost including for 1 nos Centre Table 600mm x 600mm x 450mm ht . complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 328 | Providing Supplying & fixing of Center Table Round (750mm Dia x 450mm ht or 750mm x750mm x450mm ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 329 | Providing Supplying & fixing of Center Table (1200mm x 600mm x450mm) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 330 | Providing Supplying & fixing of Corner Table (600mm Dia x 450mm ht or 600mm x 600mm x 450mm ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 331 | Providing ,Supplying and fixing of Round Dining Table (4 Seater) 1200mm Dia x750mm ht as per Drawing & specification including erection at site. Table top : 25 mm thk. BWP Grade 710 Ply Finished with 4mm thk Approved Veneer with Melamine Polish Teakwood Edge band on all side. Table top at 750mm height from floor level. Mounted on Teakwood Frame work & Dacorative Crafted Legs with melamine Polish Complete as per Drawing or as per Directed.Cost including for 4 nos Chair Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. (Cost for 1set of 4 Nos Chair & 1Table) |
| 332 | Providing ,Supplying and fixing of Dining Table (10 Seater) 2700mm x1200mm x 750mm ht as per Drawing & specification including erection at site. Table top : 25 mm thk. BWP Grade 710 Ply Finished with 4mm thk Approved Veneer with Melamine Polish & Teakwood Edge band on all side. Table top at 750mm height from floor level. Understructure made from Teakwood Frame work with melamine Polish & Crafted Teakwood Dacorative Legs As per Drawing with Melamine Polish.Complete as per Drawing or as per Directed.Cost including for 10 nos Chair Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. (Cost for 1set of 10 Nos Chair & 2700mm x 1200mm x750mm ht Table) |
| 333 | Providing Supplying & Fixing of Console Unit (Size 2400mm x 600mm x 780mm ht) as per Drawing & specification including erection at site. Console cabinet Made from 18mm Marine Ply Structure with all External Side Finished with Partly 4mm Veneer Cladding with PU polish & Partly 4mm MDF Cladding with PU Paint As per drawing.Console unite Provide storage unit shall have suitable size Shutter & Drawer As per Drawing with edge teak wood beading. Shutter operated on auto closing hinges,Cabinet will have individual locking arrangement & necessary hardware like SS mat finish handles/ ball catch etc.Complete as shown in the drawing.Unit Made Two Level Structure higher level Top is to be provided 12mm thk.Toughned Glass Topwith Edge Polish held in position using 18mm thk Plywood frame with Veneer With PU Polish Complete as shown in Image. |
| 334 | Standard Rooms : (1+5) Providing Supplying and Fixing of Double Bed (Including Side Table & Bed back Head board Paneling) Size:-1980mm x 2030mm as per Drawing. The bed made out of 18mm thick BWP Grade 710 base, vertical side portion made out of teak wood and Sheashem wood as per detail drawings given at the time of execution. Bed make out of with BWP Grade 710 Plywood Structure & Solid wood , External side of Bed is Solid wood,Fabric,Veneer with PU or Melamine polish. & Storage and Shutter are not applicable. Hardware is from Haffele or Hettich, Ebco.Complete with Finishing. all wooden surface finish with Polish work as per instruction of Engineer In Charge. Cost Include For 2 NosSide Tables & Head Board Paneling & Bed Runner Complete as per Directed . (II) Side Table For Double Bed (Size 600mm x 450mm x 450mm Ht) as per drawing. Side Table top made from 18mm thk BWP BWP Grade 710 Finished with 4mm Veneer & Melamine polish./ or 6mm thk Corian Top .The side table`s will having one drawer unit (soft close telescopic channel) with bottom side fixing of 75mm height skirting and above side table fixing of 12mm thick BWP Grade 710 Plywood Panelling (150mm x 500mm) with veneer finish with fitting of required hardware, material & labour etc work completed as per detailed drawings. Legs of table are considered Teak wood Crafted decorative Legs ,with Melamine Polishing (Side Table Matching with Doubled Structure) (III) Providing Supplying and Fixing of Headboard made out from 12mm Thk.Approved BWP Grade 710 ply with Required Frame work & fixing of approved shade Fabric with required stitching work with fitting of required hardware, (Size: 2100mm x 2200mm as per Drawing.(Basic rate of Fabric Rs.950/-per Mtr) (IV) Providing Supplying and Fixing of Bed front seating as per Image seating made out teakwood Crafted Frame & Crafted Legs with carving shape & Seat Made from 18mm BWP Grade 710 Plywood Structure with High density foam and approved shade fabric/leather all wooden surface finish with polish work as per instruction of Engineer In Charge.(Seating Size 1500mm x 450mm x450mm Ht or as per directed) |
| 335 | Providing & fixing of Wardrobe Size as per Detailed drawings. Made from 18mm (18mm/12mm/06mm thick BWP 710 grade BWP Grade 710 ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making with 18mm BWP Grade 710 ply with Required Frame work as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one/ Two drawer (soft close telescopic channel), Shelves with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish material & labour etc work completed as per detailed drawings. (Size 2100mm x 600mm x 2200mm ht) |
| 336 | Providing Supplying & fixing of Working Table as per Drawing .Table shall Made from 18mm BWP Grade 710 ply Table top Required 25mm Thk with 4mm thk Veneer & Melamine Polish with with durable Teak wood /Sheesham wood Edge & Legs , Table shall Provide Drawer as per Image. Drawer Made From 12mm Approved BWP Grade 710 ply,Two Drawer as per Image (soft close telescopic channel) Complete as Per Directed. all external Surfaces Finished 4mm thk Veneer with melamine Polish.(Size 1200mm x 600mm x 750mm) |
| 337 | Providing Supplying & fixing of Chair For Working Table Made from Teak wood Crafted Frame & Legs with Carving/Moulding & Contoured seat design upholstered with breathable fabric All Teak Member with Melamine Polish work Complete as per Directed. |
| 338 | Providing & fixing of Minibar Cabinet Made with Crafted from durable Teak wood /Sheesham wood with BWP Grade 710 Ply accents, this mini bar cabinet offers longevity, strength, and natural wood grain charm.from (18mm/12mm/06mm thick BWP 710 grade Ply finished with 4mm th Approved Veneer from out side & inside of storage & Shutter Making teak wood Frame & BWP Grade 710 with Ply Required Shelf With both side Veneer Cladding finished with melamine polish as per drawing & shutter operated on auto closing hinges, The storage shall have suitable size edge teak wood beading with inside fixing of 2 Tray & one / Two drawer (soft close telescopic channel),Shelves With drawers,bottle racks, and glass holders,this compact cabinet is ideal for Traditional look with fitting of required hardware, all Exposed Surfaces Veneer with Melamine polish etc work completed as per Directed.(Size 600mm x 600mm x 750mm ht) |
| 339 | Providing & fixing of LCD Cabinet Box Panelling veneer finish (Executive Suite Room)The Cabinet Made out From 18mm thick BWP Grade 710 Ply with required cutting & Jointing work proper in line and level with outside fixing of 4mm thick approved Shade veneer finish with Edge ,side Pasting of veneer as per approved shade or matching with veneer with applying of approved shade melamine (Matt/glossy) polish on veneer. Also provide Exposed TW Beading, Carving Batten Etc with melamine polish.The TV unit`s panelling with having of niche as per detailed drawings with veneer finish with fitting of required hardware, material & labor etc work completed as per detailed drawings. (Size : L1350mm x H 2200mm including Low level Box Cabinet Size 1350mm x 325mm x 450mm Ht) |
| 340 | Providing Supplying & fixing of Single Seat Sofa Made from Teak wood Frame & 18mm thk BWP Grade 710 Plywood as per drawings and design with High density PU foam ,Polyester Fiber Sheet & Upholstery Fabric as per approved shade.the Structure to be made out of BWP Grade 710 Ply wood carcass and expose part (Legs, Visible Frame etc) will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 341 | Providing Supplying & fixing of Center Table (750mm Dia x 450mm ht or 750mm x750mm x450mm ) Made from Teak wood Carving Frame & Legs as per drawings and design & Fixing 12mm thk Toughened Glass Top. carcass and expose part will be of solid wood with melamine polish of desired shade on it, complete in all respects to the entire satisfaction of Engineer-in-Charge. |
| 342 | Providing Supplying & fixing of Lounge Chair (Two Chair & 1nos Center Table) Made from Teak wood Frame , Crafted Legs & 18mm thk Marine Ply at seat as per drawings and design with commercial density foam & upholstered with breathable fabric in seat &Loose Feather foam Back seat as per Image & Thread work Lining as per Image Cost including for 1 nos Centre Table 600mm x 600mm x 450mm ht . complete in all respects to the entire satisfaction of Engineer-in-Charge. Size 900mm x 900mm (Basic rate of Fabric is Rs. 950/-per Mtr) |
| 343 | Third Floor (Banquet Hall Gathering Zone): Providing ,Supplying and fixing of Round Banquet Table with Chair (6 Seater)1500mm Dia x750mm ht as per Drawing & specification including erection at site. Table top :25 mm thk. BWP Grade 710 Ply Finished with 1.0mm thk Laminate with Crafted Teakwood Edge band on all side. Table top at 750mm height from floor level. Understructure : MS Powdercoated understructure.with Powder Coated Legs. Splayed ( Slant ) Legs made up of 40mm x 40mm MS pipe finished in Powder coating. Cross members made up of 40mm x 40mm MS Section finished in Powder coating are connected to Legs with Brackets for table support.Cost including For 6 Nos Chair as per Approved Sample.Chair with Mini Backrest Cushan Seat & back with Approved Fabric Colour Under structure MS Powder Coated Legs & frame with Approved Colour shed Coating Complete as per Directed. |
| 344 | Providing ,Supplying and fixing of Round Banquet Table with Chair (4 Seater)1200mm Dia x750mm ht as per Drawing & specification including erection at site. Table top :25 mm thk. BWP Grade 710 Ply Finished with 1.0mm thk Laminate with Crafted Teakwood Edge band on all side. Table top at 750mm height from floor level. Understructure : MS Powdercoated understructure.with Powder Coated Legs. Splayed ( Slant ) Legs made up of 40mm x 40mm MS pipe finished in Powder coating. Cross members made up of 40mm x 40mm MS Section finished in Powder coating are connected to Legs with Brackets for table support.Cost including For 4 Nos Chair as per Approved Sample.Chair with Mini Backrest Cushan Seat & back with Approved Fabric Colour Under structure MS Powder Coated Legs & frame with Approved Colour shed Coating Complete as per Directed. |
| 345 | Room Accessory : Providing ,Supplying, Installation of Mattress King Size 79'' x 71''x 8'' Thick Filling ball Fiber 1700gsm Shell Cotton high Thread Count Fabric As per Selection of Consultant or Higher Authority.(Make & Model as per suggestion by compliant Authority.) |
| 346 | Providing ,Supplying, Installation of Mattress Protector King Size 79'' x 71''100 % Cotton Fabric with bottom lining of water resistant non woven fabric, filling 150gsm thermal donned Silicone polyester wadding.Diamond Patterns quilting with elasticized knit fabric Skirting. As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) |
| 347 | Providing & Supplying, of Pillow (Feather Firm) 19'' x 29''50/50WGD & F (hypoallergenic 1250gms 233TC 100% cotton Sateen (stripe ) Down proof Double Stichedwkhaki piping C14 As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) |
| 348 | Providing & Supplying, of Pillow (Feather Soft) 19'' x 29''50/50WGD & F (hypoallergenic 1000gms 233TC 100% cotton Cambric(Plain) Down proof Double Stichedwkhaki piping C14 As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) |
| 349 | Providing, & Supplying of Pillow Protector -17\\" x 27\\" Conjugated Hollow Simonized Fibre , As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) |
| 350 | Providing, & Supplying of Pillow Protector (Soft) -17\\" x27\\" Micro Fibre ,quieted with zip , As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) |
| 351 | Providing & Supplying of Bed Rajayi with soft material like cotton. As per Selection of Consultant or Higher Authority.. (Make & Model as per suggestion by compliant Authority.) 2nos Set |
| 352 | Providing, Supplying and Fixing of Cushion. Size:- 685L X 400W. Height should be adjustable. It should be medium firm to soft in nature. 150Gm. Fiber fill. Light and machine washable. Adjust height by removing the hollow fiber fill. Material is 350 GSM Spun polyester fabric. Colour will be white or grey. As per Selection of Consultant or Higher Authority.. |
| 353 | Providing, Supplying and Fixing of Cushion Cover. Size:- 685L X 400W. It should be made out of combed cotton. It include with 1 inch border. Material is 144TC. Colour will be selected As per Selection of Consultant or Higher Authority.. |
| 354 | Providing,Supplying & Fixing of Bed Runner 17\\" x 95\\" color jacquard As per Selection of Consultant or Higher Authority. |
| 355 | Providing and Supplying of Floor Rug Carpet As per Selection of Consultant or Higher Authority. |
| 356 | Providing, Supplying of Floor Matt 20\\" x 30\\" 300gms box border 100% cotton , As per Selection of Consultant or Higher Authority. |
| 357 | Providing, Supplying of Napkin 18\\" x 21\\" white satin band As per Selection of Consultant or Higher Authority. |
| 358 | Providing, Supplying of Bath Towel 30\\" x 60\\" 600gms 100% combed or ringspun cotton provides the best softness and strength for hospitality laundering.As per Selection of Consultant or Higher Authority. |
| 359 | Providing, Supplying of Hand Towel 16\\" x 27\\" Minimum 400gms 100% combed or ringspun cotton provides the best softness and strength for hospitality laundering. As per Selection of Consultant or Higher Authority. |
| 360 | Providing, Supplying of FaceTowel 12\\" x 12\\" Minimum 50gms Plain Autoloom As per Selection of Consultant or Higher Authority. |
| 361 | Providing and supplying of 304 Stainless Steel Kettle Black 1.2 Ltr As per Selection of Consultant or Higher Authority. |
| 362 | Providing and Supplying of Acrylic Kettle tray set : 3 pc set white/black, big tray with sachet holder +service tray As per Selection of Consultant or Higher Authority. |
| 363 | Providing and Supplying of Iron board : (Size 1200mm x 375mm x 750mm) As per Hotel Standard FR silver color fabric, fold able and adjustable height, industrial grade ms powder coated frame,powder coated black color As per Selection of Consultant or Higher Authority. |
| 364 | Providing,Supplying of Philips iron : with steam or with steam and water spray or dry iron, As per Selection of Consultant or Higher Authority. |
| 365 | Providing, Supplying of Weighting scale : transparent and black base 150 kg max, digital icd display As per Selection of Consultant or Higher Authority. |
| 366 | Providing, Supplying & Fixing of wooden Regular hanger, as per selection architect eng.in charge (As per Standard size available in market) or As per Selection of Consultant or Higher Authority. |
| 367 | Providing, Supplying of Soft shoes : non woven anti, Indian size with binding logo print w/ moq As per Selection of Consultant or Higher Authority. |
| 368 | Providing, Supplying of Ash tray : SS 201,with without lid As per Selection of Consultant or Higher Authority. |
| 369 | Providing, Supplying and fixing of Hair dryer fold able stand alone on call (As per Standard size available in market) As per Selection of Consultant or Higher Authority. |
| 370 | Providing, Supplying and fixing of Clothes hook : brand: dazzle ss304 grade , non rust able As per Selection of Consultant or Higher Authority. |
| 371 | Provide, Supply & Fixing of Safe locker ( Godrej) -12\\" x12\\" x 12\\"As per Selection of Consultant or Higher Authority. |
| 372 | Providing, Supplying of ABS Soap Dispenser 800ml As per Selection of Consultant or Higher Authority. |
| 373 | Providing, Supplying and Fixing of Paper Dispenser White (As per Standard size available in market)As per Selection of Consultant or Higher Authority. |
| 374 | Providing, Supplying of Round Waste Bin Black (220*255*0.4) As per Selection of Consultant or Higher Authority. |
| 375 | Providing, Supplying of Mini Freezer 40 Ltr For Std.Room (Minibar) As per Selection of Consultant or Higher Authority. |
| 376 | Providing, Supplying of Mini Freezer 65 Ltr (Minibar) For Suite Room As per Selection of Consultant or Higher Authority. |
| 377 | Providing, supplying and fixing of Bittel Single Line Operation Phone Including wiring As per Selection of Consultant or Higher Authority. |
| 378 | Providing & Supplying of Melamine Water Glass Tray Black( for Room & Wash rooms) As per Selection of Consultant or Higher Authority. |
| 379 | Providing & Supplying of Coffee Mugs As per Selection of Consultant or Higher Authority. |
| 380 | Providing & Supplying of Gargle Glass For wash Room As per Selection of Consultant or Higher Authority. |
| 381 | Providing, Supplying and fixing of Classic model double container 350ml capacity , As per Selection of Consultant or Higher Authority. |
| 382 | Providing, supplying and fixing of Puffy. As per Selection of Consultant or Higher Authority. |
| 383 | Providing, Supplying and Commissioning of Samsung LED T.V. of 55 inch size. Resolution Full HD (1920X1080) with refresh rate 60 Hertz.2 HDMI ports to connect set top box, Blu-ray speakers or gaming console. 1 USB ports to connect hard drives or other USB devices.20 Watts output with Dolby Digital Plus 2CH Speaker Type.Tizen OS screen with In-Built WiFi,Screen Mirroring,1.5 GB RAM, 8 GB ROM, Supported Apps: Netflix, Prime Video, YouTube, Zee5, etc.Display : Hyper Real Picture Engine, 178 Degree Viewing Angle, Mega Contrast, Contrast Enhancer, Colorful, 1000 PQI.USB /HDMI supported.Audio Wattage 20 watts. Voltage 240 watts. Power source AC.Media format AVI, MPEG . Item weight 6KG 400GM.Battery cell composition Lithium Ion.Speaker Surround Sound Channel Configuration Dolby Digital Plus.(Make & Model as per suggestion by compliant Authority.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender