Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58642374

Tender For Provision Of 05 X Doors And 10 X Windows Of Bldg. No. Ht-18 Sainik Institute Under Ge (N) Ambala Cantt

Issued by Statutory Bodies & Commissions/Committees · Ambala, Haryana
Tender Value
4.88 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
9760
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of 05 X Doors And 10 X Windows Of Bldg. No. Ht-18 Sainik Institute Under Ge (N) Ambala Cantt

BOQ

Name of Work:- Provision of 05 x doors and 10 x windows of bldg. No. HT-18 Sainik Institute under GE (N) Ambala Cantt
Sl. No. Item Description
1Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete, all as specified and as directed.
2Material and labour for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete, all as specified and as directed.
3Material and labour for rendering 15mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete, all as specified and as directed.
4Material and labour for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of primer complete, all as specified and as directed.
5Material and labour for preparation of new plaster surface on walls and applying two coats of acrylic distemper over a coat of alkali resistant primer over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed.
6Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete, all as specified and as directed.
7Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete, all as specified and as directed.
8Supply and Fixing powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws , complete, all as specified and as directed.Note : (a). Glazing shall be measured and paid separately.(b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.(c). The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed.
9Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) and other required accessories complete all as specified and directed.(i) 01 Nos - Touch Lock of zinc alloyed (white /colour powder coated)(ii) steel roller system for windows(iii) handles (white/colour powder coated) of size 100mm for windows - 01 Pair(iv) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)
10Supply and fixing 10mm thick toughned glass with design on entire glass, as in UPVC door/windows frames of any size and maximum weight upto 80 Kg with connected accessories as required complete all as specified and directed.
11Supply and Fixing stainless steel butt hinges 100mm long medium weight , complete, all as specified and as directed.
12Supply and Fixing 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed , complete, all as specified and as directed.
13Supply and Fixing 150 mm long aluminium handle fabricated type anodised , complete, all as specified and as directed.
14Supply and Fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm , complete, all as specified and as directed.
15Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter , complete, all as specified and as directed.
16Supply and Fixing aluminium (Diecast) body hydraulically door closer regulated, designation No. 3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg , complete, all as specified and as directed.
17Supply and Fixing for 65 mm size long mortice lock vertical type, 2 levers with key in duplicate, mild steel body fixed in shutters with screw , complete, all as specified and as directed.
18Material and labour sheet glass 4.8mm thick tinted quality and glazing with aluminium snap beading, rubber gasket in square not exc 0.5 sqm in each pane , complete, all as specified and as directed.
19Material and labour 12mm thick prelaminated particle board interier grade (grade–1) confirming IS 14587 prelaminated both side with decorative choice lamination and fixed to aluminium door shutter with glazing clips, rubber , complete, all as specified and as directed.
20Supply and Fixing galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple , complete, all as specified and as directed.
21Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts, etc., complete all as specified and as directed by the Engineer-in-Charge.
22Note:- Amount of credit of Rs.4,050.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 & 124. of tender doCubic metre ents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58642374
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 4.88 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of 05 X Doors And 10 X Windows Of Bldg. No. Ht-18 Sainik Institute Under Ge (N) Ambala Cantt
Basic Detail
Tender No GE(N)/AMB-91/2026-27
Bidding Type Tender
Location
City Ambala
State Haryana
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 4.88 Lakhs
Tender Fee 300
EMD 9760
Exemption Available
Document List
5c4426d4-ae17-4068-b591-75d8db31b5a8.html
BOQ_897235.xls
Tenderdocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

5c4426d4-ae17-4068-b591-75d8db31b5a8.html

xls

BOQ_897235.xls

pdf

Tenderdocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender