Tender For Interior Works For The Hod Office At Academic Block-I, Room No. 001, Cie Department, Including Electrical, Audio-Visual And Associated Works At The Permanent Campus, Iit Dharwad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharwad → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Interior Works For The Hod Office At Academic Block-I, Room No. 001, Cie Department, Including Electrical, Audio-Visual And Associated Works At The Permanent Campus, Iit Dharwad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in- charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. meters |
| 5 | Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1cement: 4 coarse sand) |
| 6 | 12 mm cement plaster of mix. (inner wall) 1:4 (1 cement: 4 fine sand) |
| 7 | Providing and laying cinder concrete in cement 1:15 (1 cement: 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. |
| 8 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works above plinth and upto floor V level Concrete of M15 grade with minimum cement content of 240 kg /cum Sill concrete coping |
| 9 | Providing and laying Ceramic glazed/Antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size 300mm x 450mm |
| 11 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 12 | Providing and fixing 100mm plywood partiton wall with Aluminium framing 40x75mm as required at spacing not exceeding 600mm c/c and covered out of 1mm thick approved quality laminate, fixed over 12mm thick ply of approved brand, termite and water resistant, complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/ Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica, Hardware: Ebco/ Star/ Yele. |
| 13 | Providing and fixing 100mm plywood partiton wall with Aluminium framing 40x75mm as required at spacing not exceeding 600mm c/c and covered out of 1mm thick approved quality laminate, fixed over 18mm thick ply of approved brand, termite and water resistant, and 8mm thick glass with itching as per deisgn complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/ Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica,Hardware: Ebco/ Star/ Yele. |
| 14 | Providing and fixing Storage unit back side 12mm plwood, inside shelves and surroundings 18mm ply and doors 18mm thick block board of approved brand, termite and water resistant, inside laminate 0.8mm and exposed surface 1mm thick approved quality laminate, as per deisgn complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica, Hardware: Ebco/ Star/ Yele. |
| 15 | Providing and fixing laminate paneling, over sal wood frame work as required at spacing not exceeding 600mm c/c fixed at the wall surface and top covered out of 1mm thick approved quality laminate, fixed over 18mm thick ply of approved brand, termite and water resistant, complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/ Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica, Hardware: Ebco/ Star/ Yele. |
| 16 | Providing and fixing Meeting Table double ply support all over 18mm thick ply of approved brand, termite and water resistant, finished with 1mm thick approved quality laminate, as per deisgn complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/ Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica, Hardware: Ebco/ Star/ Yele. |
| 17 | Providing and fixing HOD cabin Table double ply support all over 18mm thick ply of approved brand, termite and water resistant, finished with 1mm thick approved quality laminate, as per deisgn complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. plywood make :century sinek/ Green Ecotech/ Saburi, Laminate make: Green/ century/ Mica, Hardware: Ebco/ Star/ Yele. |
| 18 | Providing and fixing Single shutter glass door of 12mm thick frosted toughened glass of approved make. The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements and suitable SS door rails with floral glass etching for 113 portion of door area etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, as per specifications etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, as per specifications. |
| 19 | Providing and fixing Wall décor art design as per drawing fixed with 18mm thick ply of approved brand, termite and water resistant finsihed with 1mm laminate finish complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification |
| 20 | Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. |
| 21 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 Ltr /10 Sqm over and including one coat of Special primer applied @ 0.75 Ltr /10 Sqm |
| 22 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 24 | Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge |
| 25 | Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge |
| 26 | Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate |
| 27 | Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge |
| 28 | Providing and fixing 100mm thick Dry Hollow wall partiton with Everest Mr Board with Aluminium framing 70x72mm 0.5mm GI frame as required at spacing not exceeding 600mm c/c and covered out of 12mm thick everest super MR board on both sides moisture resistant board, weight 17.93 kg/sqm, density 1200kg/m3 finished with compound and tapes complete including cost and conveyance of all materials, labour for all items of work HOM of equipment etc., complete as per specification. |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat Frame size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm |
| 30 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick |
| 31 | Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately) |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 33 | Supply and Installation of FP INVENTION VA FXD ARMS - LEATHERETTE SEAT& BACK*FP Invention Visitors Chair*Chromeplated Sledge Base* Fixed Arms*Leatherette Seat & Back (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fitted at site as per direction of engineer in InCharge. |
| 34 | Supply and Installation of ALPHA MBG FXD ARMS - PP Black Cushion Seat &Back* Alpha Medium PP (Black) Back Chair* Fabric Upholstered Cushion Seat* Centre Tilt Mechanism* Fixed Arms* Nylon Base* Fabric Upholstered Cushion Seat & Back (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fitted at site as per direction of engineer in InCharge. |
| 35 | Supply and Installation of SHERWOOD - A2119 (BEIGE/BROWN/BLACK)•Seat and Back - Finest pure leather on seat and back, Breathable Top grain leather upholstery, Thick Double Layer Board Design, Strong Supports leather upholstery•Arms - Solid Wood armrest with leather upholstery•Lumbar - Lumbar support with extra cushion padding•Plywood - Multi bend plywood with Down feather surface +High Density Foam, more comfortable than traditional chairs•Mechanism - Synchronized mechanism 4 positions lockedwith 4 positions locked•Base - Solid wood base •Gas lift - 60 Distance TUV4 gas lift – Class 4 Castors - 60 mm PU castors past BIFMA Testing (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fitted at site as per direction of engineer in InCharge. |
| 36 | Supply and Installation of FP INVENTION HB ML 2D' ADJ ARMS LEATHERETTE SEAT & BACK 'CB'*FP Invention High Back Chair*Multilock Mechanism*Two Way Adjustable Arms (Height & Swivel)*Chrome Base*Leatherette Seat & Back (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fittedat site as per direction of engineer in InCharge. |
| 37 | Supply and Installation of CONTACT PROJECT MBGS ADJ ARMS LS* Contact Project Medium Mesh Back Chair* AN 70 Mesh* Adjustable Lumbar Support* Single Lock Synchro Mechanism* One Way Adjustable Arms (Height)* Nylon Base* Fabric Upholstered Cushion Seat (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fitted at site as per direction of engineer in InCharge. |
| 38 | Supply and Installation of FORUM VA PC 4 LEGS FXD ARMSWD -SMALL* Forum Low Mesh Back Visitor Chair* AN 70 Mesh* Fixed Arms* Writing Desk - Small* Powdercoated Four Legs with castors* Fabric Upholstered Cushion Seat (featherlite chairs) Chairs to be installed as per architect approved seating layout, complete including all hardware and row/seat number plate accessories as required and to be fitted at site as per direction of engineer in In Charge. |
| 39 | Providing & fixing Sign Boards as per drawing & wherever required. The work including cost of all materials, labour charges, with all lead and lift, transportation,letc., complete as per specification and directions of the engineer in charge of the work and Consultant |
| 40 | Electrical works as required for complete integration of system |
| 41 | Wired boundary mic with cardioid Polar Patterns, Programmable Membrane Switch: On/off switch can be logic-controlled remotely for integration with automatic mixers or control systems. LED indicates mic activity, Logic Connections: TTL-compatible LED IN (active low ≤ 1V) and SWITCH OUT (active low ≤ 0.5V, sinking up to 20 mA) for remote management, Output Balanced, transformer less for low noise over long cable runs. Output impedance ~150 Ω, compatible with standard preamps, Sensitivity: Typically, -27.5 dB to -28 dBV/Pa, Signal-to-Noise Ratio ~71 dB for high speech clarity, Frequency Response: 50 Hz – 17 kHz, flat across vocal range for uncolored sound. Maximum SPL: Suitable for speech and vocals without distortion, includes internal preamplifier, Electromagnetic Immunity: Low susceptibility to RFI and EMI, resistant to interference from devices like cell phones |
| 42 | SITC of Digital Signal Processor with ADI SHARC 21489 processors with A/D and D/A Convertors & Sampling rate of 48kHz / Digitalizing bit24Bit, Input Gain varies from 0 – 48dB in 3dB Steps & 48V Phantom Power, THD + Noise 0.003%@4dBu, Dynamic Range 110 dB, Background Noise (A- weighted) -91 dBA, Common Mode Rejection Ratio @60Hz 80dB. Channel Isolation @1KHz -108 dB, Input Impedance (Balanced Connection) 9.4KΩ, Output Impedance (Balanced Connection) 102Ω, System Delay <3ms. 16 Balanced Mic / Line Inputs and 16 Balanced Line outputs on phoenix (PCB) connections with Audio Processing Functions 16 analogue inputs and 16 analogue outputs, USB Audio, Acoustic Echo Cancellations (AEC) – Single Channel, Automatic Gain Control (AGC) Noise Suppression, Auto Mixer, Matrix 8 Band Parametric EQ (Inputs & Outputs) High / Low Shelf Filters, Expander Compressor / Limiter , Feedback Suppressor, Delay 1 Channel USB input and output Control Options IP based PC software and host control. Third party control for RS-485 and RS-232. 8 General Purpose Input / Output (GPIO) connections, RS-232, RS-485, and IP control. |
| 43 | SITC of wireless handheld microphone with True diversity receiver (UHF),12 Channel Preset or better, Display on Transmitter and Receiver, RF Power output 50mW or Better, Polar Pattern: - Cardioid, Carrier frequency range 500Mhz to 865Mhz, Frequency response 20Hz to 20Khz, Mute Button on Transmitter, Battery Operation time Minimum 8hr, Should have Charging Contact in Transmitter, Receiver dynamic range 80 dB (A-weighted) Or better, switching bandwidth Minimum 30 MHz Or better. |
| 44 | 75\\" 4K professional display with Size Aspect Ratio 16:9, Resolution 3840 x 2160, Maximum Brightness 350 nits / cd/m2 & Contrast Ratio 4000:1, Response Time 8 ms, Color Gamut 92% DCI-P3, 92% CIE1976 Viewing Angle (H x V) 178 x 178°, Horizontal Frequency: 30 to 81 kHz, Vertical Frequency: 48 to 75 Hz Dot Pitch: 0.430 x 0.430 mm, Pixels Per Inch (ppi): 59 ppi, Pixel Clock Frequency: 594 MHz Surface Haze Level 2%, with Inputs Rear: 3 x HDMI (2.0) Outputs 1 x 1/8\\" / 3.5 mm (Analog Audio) HDCP Support Yes, Version 2.2 Wi-Fi Yes USB Ports 2 x USB-A Ethernet Ports 1 x RJ45 (Unspecified Ethernet) Other I/O 1 x 1/8\\" / 3.5 mm Serial (RS-232C) Input 1 x 1/8\\" / 3.5 mm Serial (RS-232C) Output Power Consumption Maximum: 231.0 W: Typical: 174.0 W / Standby: < 0.5 W |
| 45 | SITC of PTZ 4K Camera with a Frame rate up to 60fps equipped with a 12x Zoom Lens & should be compatible with video conferencing platforms like Teams and is Zoom Certified with Sensor 1/2.8 inch SONY CMOS sensor / Effective Pixels 8.51M megapixel 16:9 12x Zoom Lens which gives you a clear and fluent image Leading Auto Focus Technology Low Noise and High SNR View Angle: Parallel:6.55°(N)~69.4°(W) / Vertical:3.66°(N)~42.8°(W)AV F1.6 ~ F2.8±5% / HDMI video format: 4KP60, 4KP50, 4KP30, 4KP25, 1080P60, 1080p59.94, 1080P50, 1080I60, 1080i59.94, 1080I50, 1080P30, 1080p29.97, 1080P25, 720P60, 720P50 USB3.0 interface video format Exposure Mode Auto/Manual/Shutter priority/Aperture priority/brightness priority Aperture F1.8 ~ F11 CLOSE / Shutter Speed 1/25~1/10000 / BLC ON/OFF WDR OFF/ Dynamic level adjustment Video Adjustment Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve / SNR ≥50dB / Output Interface HDMI,USB3.0( Type B compatible with USB2.0, LAN(POE),A- IN,RS232-IN, RS232-OUT,RS422(compatible with RS485), LAN Interface: H.265,H.264 USB 3.0 Interface: YUY2,MJPEG,H.264,H265,NV12 Double track 3.5mm linear input Audio Output Interface HDMI,LAN,USB3.0 Audio Compression Format AAC,MP3,G.711A Network Interface 10M/100M/1000M Adaptive Ethernet port, support POE power supply, support audio and video output / Network Protocols RTSP, RTMP, ONVIF, GB/T28181; Network VISCA |
| 46 | Frequency Range (-10 dB) 45 Hz – 20,000 Hz Coverage, Horizontal 180° Calculated Maximum SPL @ 1 m 114 dB continuous, 120 dB peak Nominal Impedance 8 Ω (transformer bypassed) Power Handling, long-term continuous 125 W Power Handling, Peak 500 W Sensitivity (SPL/1 W at 1 m) 93 dB Transformer Taps, 100V - 5, 10, 20, 40, 80 W, bypass Transformer Taps, 70V 2.5 W, 5 W, 10 W, 20 W, 40 W, 80 W, bypass Coverage, Vertical 75° TRANSDUCERS Crossover 1 kHz, passive 2-way crossover with integrated 70/100V transformer Driver Protection Recommended high-pass protection 55 Hz with minimum 12-dB/octave filter High-Frequency 1 × compression driver, 1.3 in (33 mm) voice coil, Low-Frequency 1 × 8 in (203 mm) woofer, 1.5 in (38 mm) voice coil |
| 47 | 4-channel power amplifier with the following specifications:Output Power: 280W into 8 ohms; 280W into 4 ohms; 560W into 8 ohms; 560W into 4 ohms; 255W into high impedance (70V/100V). Signal-to-Noise Ratio: 100dB.Total Harmonic Distortion (THD): Less than 0.2% at 1kHz, half power. Frequency Response: 20Hz to 20kHz, +1.0/-1.0dB at 1W into 8 ohms or a high impedance (100V/70V) load. Power Factor Correction: Equipped with a switching power supply for harmonic control |
| 48 | 4-inch Ceiling mount Speaker LF - 4” PP Woofer & HF - 1” Mylar with frequency response of 90- 20KHz, Sensitivity 87dB, Power Taps 20W / 10W/5W / 2.5W / 8Ω, Line Input- 100V/ 70V/ 8Ω Nominal Coverage Angle 150-degree, Powder Coated Iron Mesh |
| 49 | SITC of 120 W Class-D Amplifier. with built-in Media player with Bluetooth, onboard FM tuner and MP3 player. Front panel microphone input with priority function, rear panel balanced microphone input with phantom power. Emergency input function. Dual RCA line inputs and RCA aux out.250W at 70/100V and 4-16 Ohms, 24V backup power input Supports both AC100-240V & 24V power Supply, Priority: EMC > MIC1>Others, LED indicators for power, clip, protect and signal, With Short-Circuit, clip, overload and high temp protection. |
| 50 | Supply, Installation, Testing and Commissioning of 24 U AV Rack glass door, shelfs, cable manager, PDU for AV Equipment's, silent fans, castle wheels & all other required hardware accessories. |
| 51 | SITC of 4K wireless conferencing system with two HDMI outputs, local wource input and 4K optional dongles. INPUTS: 1x USB-C, 1 x HDMI, 1x USB-C & 1x USB-A (On front panel for Dongle pairing), 3x USB3.0 Type A (Device ports), 2 x USB2.0 Type-A (Touch Ports), and Supports Airplay and Miracast. OUTPUTS: 2x HDMI (Main & Sub), 1x Audio out, 1x Ethernet ports (POE), serial RS232 with USB-C wireless video dongle, for use with Wireless presenter with USB C Dongle |
| 52 | 10M HDMI cable HDMI 2.0 Full 4k@60HZ 4:4:4 Bidirectional 18gbs Supports HDR with chip |
| 53 | Supply, Installation, Testing and Commissioning of 24AWG shielded twisted pair copper cable (Gigabit Ethernet) |
| 54 | Supply installation, testing, Equalization & commissioning of Connectors The unit shall be audio & video connectors for installing above speakers and amplifiers |
| 55 | SITC of 8 Port PoE Switch with each port data transmission capability of 10Gigabits per seconds |
| 56 | Supply installation, testing, Equalization & commissioning of Connectors The unit shall be a audio & video connectors for installing above speakers and amplifiers |
| 57 | Supply, Installation, Testing and Commissioning of 2.5 SQMM, 2 CORE SPEAKER WIRE |
| 58 | Supply, Installation, Testing and Commissioning of Audio Cables, |
| 59 | Supply, Installation, Testing and Commissioning of latest processor with 16 GB RAM, Windows 10 Pro with Licenced Operating system, 1TBHDD 8GB Graphic: HDMI Capture Card, MS Office Licences enabled Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender