Public Administrative Department Local Bodies Closing in 5 days TDR #58641971

Tender For Renewing Of Protective Shed Adjacent To The Office Room Along With Replacement Of Dilapidated Portions Of Railing, Doors, Windows And Other Allied Works At Udps.

Issued by Local Bodies · Kolkata, West Bengal
Tender Value
2.89 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
5 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renewing Of Protective Shed Adjacent To The Office Room Along With Replacement Of Dilapidated Portions Of Railing, Doors, Windows And Other Allied Works At Udps.

BOQ

Name of Work:- Renewing of protective shed adjacent to the office room along with replacement of dilapidated portions of railing, doors, windows and other allied works at UDPS.
Sl. No. Item Description
1BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length orshape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface)
2BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 6. Holding down bolt with nutincluding 100 x 100 x 6 mm plate washer at bottom fitted completeand packing the hole with cement concrete or cement grout asdirected. (iv) 32 mm dia: (a) 450 mm long
3BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works incolumns, beams etc. with simple rolled structural members (e.g.joists, angle, channel sections conforming to IS: 226, IS: 808 & SP(6)- 1964 connected to one another with bracket, gussets, cleats asper design, direction of Engineer-incharge complete including cuttingto requisite shape and length,fabrication with necessary bolting, metalarc welding conforming to IS: 816- 1969 & IS: 1995 using electrodesof approved make and brand conforming to IS:814- 2004, haulage,hoisting and erection all complete. The rate includes the cost of rolledsteel section, consumables such as electrodes, gas and hire chargeof all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurancecharges etc. Payment to be made on the basis of calculated weight ofstructural members only in finished work as per IS specified weight.Payment for gusset, bracket, cleat, rivets, bolts and nuts may bemake by adding the actual weight of such items with the weight offinished structural members or 7% of weight for finished structuralmembers weighing not less than 22.5 Kg. / m. or 15 % of weight forfinished structal members weighing less than 22.5 Kg. / m. may beincreased allow for bracket, cleat, rivet, bolts and nuts etc. and noseperate payment being made for these items, as per direction ofEngineer In Charge. The rates are considered for a height of erection8m. / 2nd floor level from the ground. Add 1.5% extra over the rate foreach additional floor or 4m. beyond initiial 8m. or part thereof. II) ForStructural Works in Roof Trusses etc. using joists, channels andangles of specified section weighing less than 22.5 kg/ m
4BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (a) Tack weld
5BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld.
6BUILDING WORKS (G) WOOD AND PVC WORKS B. DOORWINDOW SHUTTER 18. Supplying, Fitting & Fixing 30 mm thick thickboth side prelaminated Double Leaf Factory made solid Panel PVCDoor Shutter consisting of outer frame made out of M.S. tubes of 19gauge thickness and size 19 mmx19 mm for styles, top and bottomrails, M.S. frame shall have cost of steel primers of approved makeand manufacture, M.S. frame covered with 5 mm th. heat mouldedPVC ?C? channel of size 30 mm th, 70 mm width out of which 50 mmshall be flat and 20 mm shall be tapered in 45 degree angle on eithersides forming styles; and 5 mm th. 95 mm wide PVC sheet out ofwhich 75 mm shall be flat and 20 mm tapered in 45 degree on theinner side to form top & bottom rail and 115 mm wide PVC sheet outof which 75mm shall be flat and 20 mm shall be tapered on bothsides to form lock rail. Top, bottom and lock rails shall be providedeither side of the panel with 10mm (5 mmx2) th.,20 mm wide crossPVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mmth. both side PVC sheet to be fitted in the M.S. frame welded/sealedto the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVCsheet beading on inner side and joined together with solvent cementadhesive. An additional 5 mm th. PVC strip of 20 mm which is to bestuck on the interior side of the ?C? channel using PVC solventadhesive etc. complete excluding all necessary hardwares as perdirection of Engineer-in-Charge. In ground floor. (For upper floorsrefer to item H(4) for items 16, 17, 18 & 19 under sub-head B )
7BUILDING WORKS (G) WOOD AND PVC WORKS A. DOORWINDOW FRAME 1. Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at thecontact surface of the frame exluding cost of concrete, Iron ButtHinges and M.S clamps. (The quantum should be correted upto threedecimals). (d) Sal : Local. Note: Extra for Lifting Charges for eachadditional floor, i) Rs. 200/- per Cu.m (upto 4th floor) ii)Rs.250/-(above 4th floor)
8SECTION 1. ------------BUILDING WORKS (K) PAINTING,VERNISHING ETC A. ORIGINAL WORKS 1 (a) Priming one coat onsteel or other metal surface with synthetic oil bound primer ofapproved quality including smoothening surfaces by sand paperingetc (This item is applicable to new work or old work when the originalsurface has been exposed by removal of old paint.)
9BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A)ORIGINAL WORKS.(2)(A) Painting with best quality synthetic enamelpaint of approved make and brand including smoothening surface bysand papering etc. including using of approved putty etc. on thesurface, if necessary :(b) On steel or other metal surface : With otherthan hi-gloss of approved quality-(iv) Two coats (with any shadeexcept white)
10SECTION 1. ------------BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding cost of chipping over concretesurface](ii) With 1:4 cement mortar (b) 15 mm thick plaster
11SECTION 1. ------------BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 15 Neat cement punningabout 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement0.152 cu.m per100 sq.m.
12BUILDING WORKS (E) ROOFING, SHEET WALLING&WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING17. Supplying, fitting & fixing Industrial Troughed Aluminium sheet(excluding the supporting frame work) of approved make & brand inalloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm &25 mm Self tapping screw ,EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150mm. end lap and one corrugation minimum side lap. (Payment to bemade on area of finished work) (Aluminium sheet to be supplied bycontractor). (i) In Roof:- c) With 0.91 mm thick sheet
13BUILDING WORKS (E) ROOFING, SHEET WALLING&WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING18. Aluminium sheet ridging fitted with self tapping screws,EPDMwashers etc complete.(Minimum 225mm end lapping). (A) 300 mmlapping each way (b) With 0.91 mm sheet
14MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :13)Santras. Note: (I)The above rates of labour are exclusive of 10%contractors profit and 1% Labour welfare cess which would beadmissible to the Contractors, but contractual percentage will not beapplicable. (II) The workersemployed on high rise building or anystructure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages.
15MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :17)Fitter Mechanic. Note: (I)The above rates of labour are exclusiveof 10% contractors profit and 1% Labour welfare cess which would beadmissible to the Contractors, but contractual percentage will not beapplicable. (II) The workersemployed on high rise building or anystructure over 30 ft in height and also workers engaged in Tunnelshall be paid 20% extra wages.
16MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem :3)Mazdoor (Male). Note: (I)The above rates of labour are exclusive of10% contractors profit and 1% Labour welfare cess which would beadmissible to the Contractors, but contractual percentage will not beapplicable. (II) The workersemployed on high rise building or anystructure over 30 ft in height and also workers engaged in Tunnelshall be paid 20% extra wages.
17Estimated amount
18Add: 9%SGST
19Add: 9%CGST
201% LWC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58641971
AUTHORITY Local Bodies
TENDER VALUE 2.89 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Kolkata Municipal Corporation
Work Description Tender for Renewing Of Protective Shed Adjacent To The Office Room Along With Replacement Of Dilapidated Portions Of Railing, Doors, Windows And Other Allied Works At Udps.
Basic Detail
Tender No KMC/S_D/UDPS/SH/26-27
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 20 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 2.89 Lakhs
Tender Fee Ref. Documents
EMD 6000
Exemption Not Available
Document List
b4220071-274a-4e1f-a4a1-1f86ddf23e7b.html
BOQ_2568806.xls
FORM.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

b4220071-274a-4e1f-a4a1-1f86ddf23e7b.html

xls

BOQ_2568806.xls

pdf

FORM.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender