Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58641811

Tender For Providing Of Miscellaneous Works At Certain Otm Bldgs And Minor Works At 1Afsb Dehradun And 30 Wg Sarsawa Under Ge (Af) Sarsawa

Issued by Statutory Bodies & Commissions/Committees · Saharanpur, Uttar Pradesh
Tender Value
16.58 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
33200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Providing Of Miscellaneous Works At Certain Otm Bldgs And Minor Works At 1Afsb Dehradun And 30 Wg Sarsawa Under Ge (Af) Sarsawa

BOQ

Name of Work:- PROVN OF MISC WORKS AT CERTAIN OTM BLDGS AND MINOR WORKS AT 1AFSB DEHRADUN AND 30 WG SARSAWA UNDER GE (AF) SARSAWA
Sl. No. Item Description
1Supply and fixing PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed by Engineer-in-charge.
2Supply and fixing PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specfication complete all as specified and as directed.
3M&L for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, Gl frame consisting of main Tee of size 38.50 x 24 00 mm and cross Tee of size 28 50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with poder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with Gl wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c and applying two coats of OBD to the ceiling board complete all as specified and as directed by Engineer-in-Charge.
4M&L for Cement concrete 75 mm thick type C-2. 1.3.6 (40mm graded aggregate) complete all as specified and directed.
5M&L for machine cut Kota stone slab flooring 20-25mm thick over cemnt screed base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slag including rubbing an polishing complete all as specified and directed.
6Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
7M & L for Cement concrete in foundations, filling and mass concrete type D2 (1:2:4) (using 40mm graded stone aggregate) complete all as specified and directed.
8S & F pre-painted galvatume aluminium Zince coaing Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specfied and directed.
9M&L for steel work in tubular trusses including special shaped waher etc complete using EWR or induction butt welded tubes conforing to 1.1161-1979 graded st 240 complete all as specfied and directed.
10M &L for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth incl all complete all as specified.
11S & F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors; ladders; framed balusters; walk ways, railings, framework of water tanks, man hole cover frame and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
12M&L for PCC in 1 2:4 type-B-2 (using 40 mm graded stone aggregate) as in mass filling, for fixing of angle in compound wall etc complete all as specified and directed.
13S&F Galvanised 2 strand, steelbarbed wire 2.24mm diabarbed with 2mm dia barbs at 75mm spacings and strainingand fixing to any type ofstandard rails strain-ingbolts, including, securing ortying at crossings with andprovision of galvanised mild steel wire, staples or steelpins, etc. as directed (eachline wire to be measured) complete all as specified and directed.
14S & F punched tape concertina coil of 600mm coil space of one round to another including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
15M&L for two coats of synthetic enamel paint to new steel surfaces including steel roof surfaces, doors, windows, grills. fencing misc places of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
16Taking down cement plaster any description, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
17M&L for rendering 15mm thick plaster (1:4) mixed with WPC as per manufacturers instructions on brick work or concrete surfaces finished even and smooth without using extra cement including taking down old cement plaster, (WPC shall be measured and paid seperately) complete all as specified and directed.
18Supply only WPC complete all as specified and directed.
19M&L for preparation of new surface of wall and applying two coats of cement base paint on wall complete all as specifed and directed.
20M & L for replacement of existing conduit point wiring for fan point complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade drawn through existing conduitwith MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed.
21Taking down ceilling fan with fan blade, fan rod and refixing after installation of antisuicidal rod complete with-blades, down rods, Fan hook and all accessories required for connection complete all as specified and directed.
22Material and labour for cleaning oiling the fans for servicing from any location and thoroughly checking the nuts, bolts, safety pin and rubber reel if necessary replace the defective items complete all as specified and directed.
23S&F ceiling fan antisuicidal rod of upto 24\\"(2feet) as requirment on site, with safety mechanism activates on over excess load, preventing misuse complete all as specified and as directed by Engineer-in-Charge.
24S&F ceiling fan antisuicidal rod of upto 42\\"(4feet) as requirment on site, with safety mechanism activates on over excess load, preventing misuse complete all as specified and as directed by Engineer-in-Charge.
25Supply and fix in replacement of ceilling fan canopy complete all as specified and directed.
26Supply and fix in replacement of fan sheet including removal of old one complete all as specified and directed.
27S&F in replacement of ceiling rose surface bakelite including removal of old one three terminals complete all as specified and directed.
28S&F in replacement of condenser 2.5 mfd complete all as specified and directed.
29S & F in of concealed/surface wiring with PVC insulated, FRIS unsheathed two single core cable 1100 voits grade with stranded copper conductor of size 1.5 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 1.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colom as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 1.5 sqmm cable and one run of 1.5 sqmm cabie of earth continuity conductor and conduit shall be a unit length.
30S&F in replacement switch piano type 5 amp one way ISI Marked complete all as specified and directed by Engineer-in-Charge.
31S&F in replacement socket outlet 2-in-1, 6 pin 5 amp and 15 amp complete all as specified and directed.
32S&F PVC gang box for mounting one switch and one socket of 5 Amps including all accessories complete all as specified and as directed.
33Supply and fixing of wall mounted Air circulator 600 mm sweep includi copper wound motor, metallic body, 50 Hz, 240 volt including all fixing/welding accessories complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58641811
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 16.58 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Miscellaneous Works At Certain Otm Bldgs And Minor Works At 1Afsb Dehradun And 30 Wg Sarsawa Under Ge (Af) Sarsawa
Basic Detail
Tender No 8126/SAR-T-54/2026-27
Bidding Type Tender
Location
City Saharanpur
State Uttar Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 18 Dec 2026
Finance
Tender Value 16.58 Lakhs
Tender Fee 500
EMD 33200
Exemption Available
Document List
BOQ_897175.xls
ee41efe3-39a4-416d-93c1-0a80d17656d6.html
SART54.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_897175.xls

html

ee41efe3-39a4-416d-93c1-0a80d17656d6.html

pdf

SART54.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender