Housing Urban and Rular Development Government Departments Closing in 20 days TDR #58641430

Tender For Construction Of Model Public Toilet Block In The Court Complex At Lakhipur Under Cachar District Judiciary, Assam

Issued by Government Departments · Cachar, Assam
Tender Value
29.92 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
59852
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Model Public Toilet Block In The Court Complex At Lakhipur Under Cachar District Judiciary, Assam

BOQ

Name of Work:- Construction of Model Public Toilet Block in the Court Complex at Lakhipur under Cachar District Judiciary, Assam
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil.
2Providing and laying 75 mm thick compacted had of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to pinin ievei 4.1.5 1.3.6 (1 Cement. 3 coarse sand (zone-iii) derived from natural sources: 6 graded stone aggregate 20 mm inominal size derived from natural sources)
4Steel reinforcement for R.C.C. work including straightening, jcutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 5000 or more
5Steel reinforcement for R.C.C. work including straightening, jcutting, bending, placing in position and binding all complete upto plinth level 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 5000 or more
6Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
7Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
9Centering and shuttering including strutting, propping etc. and removalof form for Foundations, footings, bases of columns, etc. for massconcrete
10Centering and shuttering including strutting, propping etc. and removalof form for Suspended floors, roofs, landings, balconies and accessplatform
11Centering and shuttering including strutting, propping etc. and removalof form for Lintels, beams, plinth beams, girders, bressumers andcantilevers
12Centering and shuttering including strutting, propping etc. and removalof form for Columns, Pillars, Piers, Abutments, Posts and Struts
13Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
14Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in superstructure above plinth level up to floorV level:Cement mortar 1:4 (1 cement :4 coarse sand)
15Providing and laying damp-proof course 40mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources)
1612 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
1715 mm cement plaster on the rough side of single or half brick wall ofmix : 1:4 (1 cement: 4 fine sand)
1815 mm cement plaster on rough side of single or half brick wallfinished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
19Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
20Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet forplacing the tiles gently and easily : Size of Tile 600 x 600 mm
21Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete: Size of Tile 600x600 mm
22Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand): 11.19.1 Light shade pigment using (white cement
23Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc, including cutting, hoisting, fixing in postion and applying a printing coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
24Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 withcharacteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In- Charge. (Cost of truss/frame work shall be paid separately). 12.65.1 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm
25Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness,Alloy 31500 (IS designation (Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer jon both sides of the sheet and polyester top coat 15-18 microns, jusing self drilling/ tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : 12.66.1 Precoated/mill finish aluminium Ridges plain (500-600mm)
26Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc 9.3.1 Sal wood
27Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in celling etc. complete (frame work to be paid seperatately) 6 mm thick Cerment fiber board as per IS: 14862
28Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm Uickness, including ninges, jami, jock jamo, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 160 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and snock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 10 14 2 Profile C10.14 2.1 Fixing with adjustable lugs with split end tail to each jamb
29Providing and fixing IS! marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.20.2 30 mm thick including Si marked Stainless Steel bull hinges with necessary screws
30Providing and fixing M.S. grifts of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawi plugs screws etc.
31Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 41mm), with wall thickness 2.0 mm (40.2 mm). comers of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineerin- charge9.117.1 Extruded section profile size 48x40 mm
3230 mm thick factory made Polyviny! Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (±0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackels of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (±0.1 mm) wail thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (±0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm. having over all thickness of 20 mm and 1 mm (±0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised MS. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge
33Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
34Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and desti fasteners to be paid for separately) 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately)21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868 Minimum anodic coating of grade AC 15)
35Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
36Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
37Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
38Finishing walls with Acrylic Smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67 6/10 sqm over and including priming coal of exierior primer applied @ 2.20 kg/10 sqm)
39Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. compiete: 9.100.1 125 mm
40Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :9.97.2 250x10 mm
41Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less the AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 19.96.1 300x16 mm
42Providing and fixing Chlorinated Polyute Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work - Exposed on wall18.7.2 20 mm nominal dia Pipes
43Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including as CPVC plain & brass threaded ittings, sic fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Goncealed work, including cutting chases and making good the walls etc 18.8.2 20 mm nominal dia Pipes
44Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including atl CPVC plain & brass threaded fittings This includes jainting of pipas & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 18.9.6 50 mm nominal dia Pipes
45Providing and fixing C.P. brass long body bib cock of approved quality conforming to 15 starsiards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore
46Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominat bore
47Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron Par S trap, 10 litre low level white P.V.C. flushing cistem, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral typo foot rests
48Providing and fixing white vitreous china pedestal lype water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid
49Providing and foding white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistem, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic
50Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
51Providing and fixing soil, waste and vent pipes: 17.35.1 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as Iper IS: 1729
52Providing and fixing soil, waste and vent pipes: 17.35.2 75 mm diameter: 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729
53Providing and fixing 600x450 mm bovalad adge mirror of superior glass (of approved quality) complate with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
54Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm CP brass pillar laps
55Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
56Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 Flexible pipe17.28.2.1 32 mm dia
57Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
58Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
59Providing and fixing white vitreous china flat back or wall comer type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
60Providing and fixing white vitreeus chins squatting plate urinal with integral rim longitudinal flush pipe.
61Providing and placing in position 100 mm thick factory made machine hatched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade@maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift. handling at site etc. all complete as per direction of Engineer-in-Charge.
62Boring in soft soil / normal clay / sandy soil by bit of size either 5 5/8\\" or 6 7/8\\" or 7 7/8\\" and collecting sample of soil at every 3.0 m depth or wherever there is a change of strata in sample boxes with the -distinguishing marks including arranging and carriage of necessary boring materials / tools / bentonite etc. and withdrawing the drill pipe for lowering well assembly etc all complete as directed.
63Casing/sinking / lowering of 200 mm dia MS pipe including cost of pipe and labour charge for casing, welding of joint by welding machine and sinking by drilling rig in portion ali complete as directed by department.
64U.P.V.C. Casing Pipes (IS: 12818/1992) (1) 150 mm dia
65Labour charge for sinking, lowering, fitting, fixing(b) For 50 to 100 ml depth in position of 150 mm dia U.P.V.C. pipe assembly comprising of strainer, pipes and cone in potable water bearing strata, washing the bore well etc. and supplying necessary jointing materials including carriage of materials and cleaning and priming the tube well all complete as directed. 18.9.6 50 mm nominal dia Pipes
66Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.19.3 40 mm nominal bore18.19.3.2 Vertical
67Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed.) measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
68Supplying and packing pea gravel around the periphery of casing including screening, washing etc. all complete as directed
69Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A
70Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
71Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
72Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.180 mm X 100 mm X 60 mm deep
73Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.200 mm X 125 mm X 60 mm deep
74Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.200 mm X 250 mm X 100 mm deep
75Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch
76Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet
77Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
78Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way/6 way, Double door
79Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Single Pole
80Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)Double Pole
81Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
82Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
83Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
84Supplying with fitting fixing of 300mm spring Air.Domestic exhaust fan(Crompton or equivalent make)
85Supplying ,fitting & fixing of Indoor BAJAJ LED Batten 22 Watts 1150mm Commercial Lighting with Compact Light Linea with its bright light output at 100 lumen/watt give ultra wide light distribution. Gives glare free, smooth light distribution. The bottom of the batten is in white color along with aesthetic looking end cap and HPF LED driver.Bajaj/Crompton Make (Model No:LDLL22-WW)
86Supplying with fitting fixing of 9 Watt LED Bulb
87Supplying of Power cables POLYCAB BRAND Power Cables, Solid Aluminum Conductor up to 10 sq. mm & Balance Stranded Conductor, XLPE Insulated, Cores Laid Up, PVC nnersheathed,Unarmoured/Armoured (Aluminium wire for single core up to 70 sq. mm & balance Aluminium strip, Galvanised wire for cables upto 2Cx10 sq. mm, 3Cx10 sq. mm, 4Cx6 sq. mm & balance all galvanised steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as perIS 7098 (Part 1) 1988 with upto Date Amendments10.00 Sq.mm Armoured 2.00 core-A2XWY A2XFY Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58641430
AUTHORITY Government Departments
TENDER VALUE 29.92 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Public Works Building And Nh Department
Work Description Tender for Construction Of Model Public Toilet Block In The Court Complex At Lakhipur Under Cachar District Judiciary, Assam
Basic Detail
Tender No SBC/CS/2026-27/02/756
Bidding Type Tender
Location
City Cachar
State Assam
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 29.92 Lakhs
Tender Fee 1000
EMD 59852
Exemption Available
Document List
BOQ_86215.xls
ea47f33e-afac-4de7-81ff-86506e0b3ad4.html
FOB.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_86215.xls

html

ea47f33e-afac-4de7-81ff-86506e0b3ad4.html

pdf

FOB.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender