Bids Are invited for Custom Bid For Services - Civil Work For Building Extension Including Repair And Renovation Of Existing Building And Toilet Block Reconstruction At G And L Manali Chennai - Excavation In All Types Of Soil, Including Ordinary Soil
Tender Overview
Project Description
Bids Are invited for Custom Bid For Services - Civil Work For Building Extension Including Repair And Renovation Of Existing Building And Toilet Block Reconstruction At G And L Manali Chennai - Excavation In All Types Of Soil, Including Ordinary Soil, Hard Soil And Other Strata Encountered, By Manual And/Or Mechanical Means, To The Required Lines, Levels, Grades And Dimensions As Specified And Directed By The Engineer-In-Charge, Including All Labour, Tools, Tackles, Plant, Machinery, Dewatering, Shoring And Strutting Wherever Required, Lifting, Loading, Handling And Transportation Of Excavated Material. The Excavated Earth Shall Be Suitably Stacked For Reuse Or Disposed Of At The Designated Location, As Directed By The Engineer-In-Charge. The Item Shall Also Include Dressing And Leveling Of The Excavated Surface And Backfilling With Suitable Excavated Earth Or Approved Filling Material, In Layers With Watering And Compaction, Wherever Required, Complete In All Respects As Per Specifications And Instructions Of The Engineer-In-Charge. , Dismantling Of Cement Concrete And/Or Reinforced Cement Concrete Work Of Any Grade, At All Heights And Levels, By Manual And/Or Mechanical Means, Including All Labour, Tools, Tackles, Plant And Machinery, Cutting Of Reinforcement, Wherever Required, And Providing, Erecting And Dismantling Of Necessary Scaffolding, Staging, Working Platforms And Other Temporary Arrangements For Safe Execution Of The Work. The Item Shall Include Breaking, Dismantling, Removal, Collection, Stacking Of Serviceable Materials As Directed By The Engineer-In-Charge, Loading, Handling, Transportation And Disposal Of All Debris And Unserviceable Dismantled Materials Outside The Factory Premises At An Approved/Designated Disposal Location, Including All Leads, Lifts, Loading/Unloading, Tipping/Disposal Charges And All Incidental Costs, Complete As Per Cpwd Specifications And To The Satisfaction Of The Engineer-In-Charge, With No Extra Payment On Any Account. , Dismantling Of Brickwork Of All Thicknesses, At All Heights And Levels, Wherever Required And As Directed By The Engineer-In-Charge, By Manual And/Or Mechanical Means, Including All Labour, Tools, Tackles, Plant And Machinery, And Cutting Of Grooves/Chases Wherever Required. The Item Shall Include Providing, Erecting And Dismantling Of Necessary Scaffolding, Staging And Working Platforms, Along With Green Netting Or Hessian Cloth As Required For Safe Execution Of The Work And Protection Of Adjoining Areas. It Shall Further Include Breaking, Dismantling, Removal, Collection, Handling, Loading, Transportation And Disposal Of All Debris And Unserviceable Materials Generated From The Dismantling Work Outside The Factory Premises At An Approved/Designated Disposal Location, Including All Leads, Lifts, Loading/Unloading, Tipping/Disposal Charges And All Incidental Costs, Complete As Per Cpwd Specifications And To The Satisfaction Of The Engineer-In-Charge, With No Extra Payment On Any Account. , Surface Preparation By Hacking The Existing Concrete Surface And Removal Of All Loose, Spalled And Distressed Concrete Around The Affected Rcc Elements, Including Exposing The Sound Concrete Surface, As Required And As Directed By The Engineer-In-Charge. The Rate Shall Be Inclusive Of Providing, Erecting And Dismantling The Required Ms Scaffolding And Staging For Carrying Out The Work Safely, Including Providing And Fixing Of Hessian Cloth Covering, Wherever Required, As Per The Instructions Of The Engineer-In-Charge. The Rate Shall Be Inclusive Of Carrying Out The Work On Structures Of All Shapes, Sizes, Heights And Configurations. Any Reinforcement Steel Exposed Or Removed During The Hacking Process Shall Be Carefully Segregated And Handed Over To The Designated Officer Of Balmer Lawrie. The Rate Shall Be Inclusive Of All Labour, Tools, Tackles, Equipment And Incidental Works Necessary For Satisfactory Completion Of The Work. , Removal Of Damaged Reinforcement / Structural Steel: Carefully Cutting, Removing And Dismantling Damaged, Corroded Or Otherwise Defective Reinforcement Bars And Structural Steel Members From The Existing Rcc/Structural Elements, As Identified And Directed By The Engineer-In-Charge, Including Handling, Segregation, Stacking And Transportation Of The Dismantled Steel To The Designated Storage Yard Within The Premises. The Rate Shall Be Inclusive Of Providing, Erecting And Dismantling The Required Ms Staging/Scaffolding, Including Providing And Fixing Green Netting For Safety And Protection, As Directed By The Engineer-In-Charge. The Rate Shall Also Include All Necessary Labour, Tools, Tackles, Cutting Equipment, Lifting Arrangements And Incidental Works Required For Safe And Complete Execution. The Recovered Reinforcement/Structural Steel Shall Remain The Property Of Balmer Lawrie And Shall Be Handed Over To The Designated Officer. , Anti-Corrosive Treatment For Reinforcement Bars: Cleaning Of Exposed Reinforcement Bars Thoroughly By Wire Brushing To Remove Rust, Scale, Loose Particles And Other Deleterious Materials, Followed By Application Of Approved Anti-Corrosive Zinc-Rich Epoxy Primer To The Prepared Reinforcement, Complete As Directed By The Engineer-In-Charge. The Rate Shall Include The Cost Of All Materials, Labour, Tools, Tackles, Equipment And Incidental Works Required For Complete Execution. For Measurement Purposes, The Concrete Surface Around The Exposed Reinforcement Shall Be Considered To An Extent Of 50 Mm Width All Around The Exposed Reinforcement. The Rate Shall Also Be Inclusive Of Providing, Erecting And Dismantling The Required Ms Scaffolding/Staging, Including Providing And Fixing Of Green Netting For Safety And Protection, As Directed By The Engineer-In-Charge. , Providing And Fixing Of Shear Connectors: Providing And Fixing Shear Connectors To Existing Rcc/Structural Concrete Members, Including Drilling Of 12 Mm Diameter Holes To A Depth Of 50–75 Mm In The Existing Concrete, Cleaning Of Drilled Holes And Fixing 8 Mm Diameter Reinforcement Bars As Shear Connectors Using Approved Chemical/Anchor Grout Such As Sysgrout 657 Or Equivalent, Complete As Directed By The Engineer-In-Charge. The Rate Shall Include All Materials, Anchor Grout, Drilling, Labour, Tools, Tackles, Equipment And Incidental Works Required For Complete Execution. The Quantity Of Reinforcement Steel Used For Shear Connectors Shall Be Measured And Paid For Separately Under The Relevant Item. The Rate Shall Also Be Inclusive Of Providing, Erecting And Dismantling The Required Ms Scaffolding/Staging, Including Providing And Fixing Of Green Netting For Safety And Protection, As Directed By The Engineer-In-Charge. , Drilling And Fixing Of Main Reinforcement Bars In Rcc Columns And Beams: Drilling Of 16/20 Mm Diameter Holes To A Depth Of 120–150 Mm In Existing Rcc Columns And Beams And Fixing 12/16 Mm Diameter Reinforcement Bars Using Approved Chemical Anchor/Grout Such As Sysgrout 657 Or Equivalent, Complete As Per The Specifications And As Directed By The Engineer-In-Charge. The Rate Shall Include Drilling, Cleaning Of Holes, Approved Anchoring Material, Labour, Tools, Tackles, Equipment And All Incidental Works Required For Complete Execution. The Reinforcement Steel Quantity Shall Be Measured And Paid For Separately Under The Relevant Item. The Rate Shall Also Be Inclusive Of Providing, Erecting And Dismantling The Required Ms Staging/Scaffolding For Carrying Out The Work Safely, As Directed By The Engineer-In-Charge. , Providing And Fixing Of Cold Twisted Hysd Reinforcement Steel Bars: Providing And Fixing Cold Twisted Hysd Reinforcement Steel Bars Of Various Diameters, Of Approved Make, For Rcc Works, Including Straightening, Cutting, Bending, Placing, Binding, Welding Or Fabrication, As Required, And Securely Fixing The Reinforcement In Position Complete, All As Per The Approved Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Labour, Materials, Tools, Tackles, Equipment And Incidental Works Required For Complete Execution. Reinforcement Steel Shall Be Measured For Payment By Weight In Accordance With The Relevant Is Codes And Approved Bar Bending Schedules. No Separate Measurement Or Payment Shall Be Made For Binding Wire, Laps, Chairs, Supports Or Other Incidental Fixing Accessories, Wherever Applicable. The Rate Shall Also Be Inclusive Of Providing, Erecting And Dismantling All Required Ms Scaffolding And Staging For Carrying Out The Work Safely At All Heights And Levels, As Directed By The Engineer-In-Charge. , Providing And Carrying Out Core Cutting Of 75/100 Mm Diameter Through Existing Rcc Slab, For The Full Depth Of The Slab, At Required Locations For Making Provisions For Concreting Of Column/Beam Encasement, Including Setting Up And Operation Of Suitable Core Cutting Machinery, Drilling, Cutting And Removal Of The Core, Handling And Disposal Of Cut-Out Material/Debris As Directed, Including All Labour, Materials, Machinery, Tools And Tackles, Consumables And Incidentals, Complete As Per The Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Be Inclusive Of All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Executing The Work At All Heights And Levels. , Providing And Laying Machine-Mixed, Mechanically Vibrated Reinforced Cement Concrete Of M-25 Grade Using 20 Mm Nominal Size And Down Graded Graded Stone Aggregate, Including Mixing, Placing, Compacting By Vibration, Finishing, Curing And All Necessary Centering And Shuttering, Complete In All Respects, For All Levels And At All Heights, As Per The Drawings, Specifications And Instructions Of The Engineer-In-Charge. Where The Quantity Of Work Is Sufficient And Feasible For Execution Through Ready Mix Concrete (Rmc), Preference Shall Be Given To The Use Of Rmc Conforming To Relevant Is Codes And Approved By The Engineer-In-Charge. The Minimum Cement Content Shall Be 300 Kg Per Cubic Metre Of Concrete. The Rate Shall Be Inclusive Of All Materials, Labour, Machinery, Equipment, Tools And Tackles, Transportation, Handling, Placing, Pumping Wherever Required, And All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Laying Self-Compacting Reinforced Cement Concrete Of M-30 Grade For Columns, Sunshades And Other Structural Members, Using 12 Mm Nominal Size Graded Coarse Aggregate, Silica Fume, Polypropylene Fibres And Suitable Approved Chemical Admixtures, As Required, Including Batching, Mixing, Transportation, Pumping, Placing And Pouring Of Concrete, Complete In All Respects. The Concrete Shall Be Capable Of Achieving Adequate Flowability, Passing Ability And Stability Without Conventional Mechanical Vibration And Shall Be Designed And Produced In Accordance With Relevant Is Codes And As Approved By The Engineer-In-Charge. Concrete Shall Be Poured In Lifts, With The Vertical Free Fall/Pouring Height Not Exceeding 1.50 M At One Stretch, To Avoid Segregation And Other Defects. The Rate Shall Include All Materials, Cement, Aggregates, Silica Fume, Polypropylene Fibres, Admixtures, Labour, Machinery, Equipment, Pumping, Transportation, All Leads And Lifts, Curing, Finishing And All Incidental Works, Complete. The Rate Shall Also Include Providing And Maintaining Fully Leak-Proof And Rigid Centering And Shuttering Suitable For Self-Compacting Concrete, Including All Necessary Supports, Staging And Bracing, For All Sizes, Shapes, Heights And Levels. The Rate Shall Further Include All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Execution Of The Work At All Heights And Levels, Complete As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. , Providing, Mixing And Laying Self-Compacting, Non-Shrink, Free-Flow High-Grade Micro Concrete Of M-50 Grade Of Approved Make For Strengthening And Encasement Of Existing Rcc Beams, Using 12 Mm Nominal Size Graded Coarse Aggregate And Water, Together With Approved Additives/Admixtures, Strictly In Accordance With The Manufacturers Recommendations And As Approved By The Engineer-In-Charge, Including Batching, Mixing, Transportation, Pumping, Pouring, Placing, Finishing And Curing, Complete In All Respects. The Micro Concrete Shall Be Non-Shrink, Free-Flowing And Suitable For Structural Repair/Encasement Works, Conforming To Relevant Is Codes And The Manufacturers Technical Specifications. The Rate Shall Include All Materials, Labour, Machinery, Equipment, Tools And Tackles, Transportation, All Leads And Lifts And All Incidental Works Necessary For Satisfactory Completion Of The Work. The Rate Shall Also Include Designing, Fabricating, Erecting And Maintaining Rigid, Adequately Supported And Completely Leak-Proof Centering And Shuttering For Beams, Including All Necessary Supports, Bracing And Sealing Arrangements To Prevent Leakage And Bulging During Pouring. The Shuttering Shall Be Adequately Tied Using 16 Mm Diameter Tie Rods At Spacing Not Exceeding 500 Mm Centre To Centre, Or As Otherwise Approved By The Engineer-In-Charge, To Ensure Proper Alignment And Prevent Bulging. The Rate Shall Further Include All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Execution Of The Work At All Heights And Levels, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. , Providing And Applying Polymer Modified Repair Mortar, Up To 30 Mm Thick, For Repair Of Localized Spalled, Damaged And Deteriorated Areas Of Existing Rcc Beams, Columns, Slabs And Walls, Using Approved Polymer-Modifying Compound Such As Sika Latex Or Equivalent, Mixed And Applied In Accordance With The Manufacturers Recommendations And As Approved By The Engineer-In-Charge, Including Preparation Of The Substrate By Removing All Loose, Cracked And Unsound Concrete, Cleaning And Preparing The Exposed Surface, Mixing, Application, Compaction And Finishing Of The Repair Mortar To The Required Profile And Thickness, Including Curing, Complete In All Respects. The Repair Mortar Shall Be Suitable For Structural Concrete Repair And Shall Conform To Relevant Is Codes And Manufacturers Technical Specifications. The Rate Shall Include All Materials, Polymer-Modifying Compound, Labour, Machinery, Equipment, Tools And Tackles, Consumables, Transportation, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Further Include All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. , Providing And Constructing Brick Masonry Work With Best Quality, Sound, Hard, Well-Burnt Locally Available Burnt Clay Bricks Of Approved Quality, Conforming To Relevant Is Codes, In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Soaking Of Bricks In Water, Laying, Bonding, Plumbing, Levelling, Raking Out Joints For Plastering Or Pointing Wherever Required, Curing, Scaffolding And All Incidental Works, Complete As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Thickness Of Horizontal And Vertical Mortar Joints Shall Not Exceed 10 Mm. The Rate Shall Be Applicable For All Shapes And Sizes, Lengths, Widths, Thicknesses, Heights And Levels And Shall Include All Materials, Labour, Transportation, Lifts, Tools And Tackles, Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Execution Of The Work, Complete. , Providing And Carrying Out Crack Repair In Existing Brick Masonry Walls, Including Thorough Cleaning Of The Affected Area With Wire Brushes And Removal Of Loose Material, Existing Paint, Surface Coatings And Other External Elements As Required, Cutting And Forming A V-Groove Of Minimum 15 Mm Depth And 5 Mm Width Along The Full Length Of The Crack, Cleaning And Preparing The Groove And Applying Approved Polymer-Modified Crack Repair Filler/Putty Such As Smartcare Crack Seal Of Asian Paints Or Equivalent, Strictly In Accordance With The Manufacturers Recommendations. The Repaired Surface Shall Thereafter Be Treated With A High-Performance Elastomeric Cementitious Waterproof Coating Such As Brushbond Rfx Or Equivalent Approved Product, Including Preparation Of The Substrate, Mixing, Application In The Required Number Of Coats, Curing And Finishing, Complete In All Respects. The Rate Shall Include All Materials, Labour, Machinery, Tools And Tackles, Consumables, Transportation, Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Repair. The Rate Shall Be Applicable For All Sizes, Shapes, Heights And Levels And Shall Include Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. , Providing And Applying Cement Plaster 18 Mm Thick In Two Coats Over Brick Masonry/Rcc Surfaces, Comprising First Coat Of 12 Mm Average Thickness In Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) And Second Coat Of 6 Mm Average Thickness In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Preparation Of The Surface, Hacking/Raking Of Joints Wherever Required, Wetting, Application, Levelling, Finishing To A True Line, Level And Plumb And Providing Sponge Finish To The Entire Surface, Including Curing, Complete In All Respects As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Plaster Shall Be Executed To Obtain A Uniform, Even And Well-Finished Surface, And Wherever Additional Thickness Is Required Locally To Achieve The Specified Line, Level, Plumb And Finished Surface, The Same Shall Be Provided Without Any Extra Cost. The Rate Shall Include All Materials, Labour, Transportation, Tools And Tackles, Curing And All Incidental Works, And Shall Be Applicable For All Heights And Levels, Including The Cost Of Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging And Working Platforms Required For Execution Of The Work, Complete. , Providing, Fabricating And Erecting Structural Steel Work Of Approved Quality, Of All Sections, Sizes And Dimensions, Including Steel Beams, Columns, Trusses, Purlins, Chequered Plates And Other Structural Steel Members As Required, At All Levels And Positions, Including Cutting, Straightening, Drilling, Welding, Bolting, Splicing, Connections, Fixing And Erection Complete In All Respects, As Per Approved Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Work Shall Include Supply And Fixing Of Bolts, Nuts, Washers And Other Required Fasteners Of Approved Make And Suitable Sizes, Including All Necessary Fabrication And Erection Accessories. The Steel Surfaces Shall Be Thoroughly Cleaned And Prepared And Provided With Two Coats Of Approved Zinc Chromate Primer Followed By Two Coats Of Approved Synthetic Enamel Paint Of Asian Paints Ltd. Or Equivalent, Including Surface Preparation And Application Complete. The Rate Shall Be Inclusive Of All Materials, Labour, Transportation, Loading, Unloading, Lifting, Machinery, Welding Electrodes, Tools And Tackles, Consumables, All Leads And Lifts, And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. , Dismantling Of Existing Structural Steel Members Of All Sections, Sizes And Dimensions, Including Beams, Columns, Trusses, Purlins, Chequered Plates And Other Structural Steel Members, At All Levels And Positions, By Adopting Suitable Methods Including Gas Cutting, Cutting, Unbolting, Dismantling Of Welded/Bolted Connections And Lowering Of Dismantled Members, As Required, Without Causing Damage To The Adjoining Structure. The Work Shall Include Necessary Handling, Segregation, Stacking, Loading, Transportation And Handing Over Of The Dismantled Structural Steel Members To Balmer Lawrie (Bl) At Its Designated Scrap Yard, As Directed By The Engineer-In-Charge. The Rate Shall Include All Labour, Machinery, Gas Cutting Equipment, Gases, Welding/Cutting Consumables, Tools And Tackles, Lifting And Handling Equipment, Transportation, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Work. The Work Shall Be Carried Out Strictly In Accordance With Applicable Safety Requirements, Including Necessary Precautions For Hot Work, Working At Height, Lifting And Handling Of Steel Members. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Supports And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Specifications And Instructions Of The Engineer-In-Charge. , Dismantling And Removal Of Existing 600 Mm Diameter Turbo Ventilators, Including Dismantling Of All Associated Supports, Fixtures, Fasteners And Connections, As Required, At All Heights And Levels, By Adopting Suitable Methods And Precautions So As To Avoid Damage To The Adjoining Roof/Structural Members. The Dismantled Turbo Ventilators And Associated Reusable/Scrap Materials Shall Be Carefully Lowered, Handled, Stacked, Transported And Handed Over To Balmer Lawrie (Bl) At Its Designated Scrap Yard Within The Premises, As Directed By The Engineer-In-Charge. The Work Shall Be Carried Out In A Safe And Systematic Manner In Accordance With Applicable Safety Requirements, Including Precautions For Working At Height, Lifting, Lowering And Handling Of Dismantled Components. The Rate Shall Include All Labour, Machinery, Lifting And Handling Equipment, Tools And Tackles, Consumables, Transportation, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Supports, Barricading And Other Safety Arrangements Required For Carrying Out The Work Safely At All Heights And Levels, Complete As Per Specifications And Instructions Of The Engineer-In-Charge. , Dismantling And Removal Of Existing Damaged Gi/Asbestos Roof Sheets And Cladding Sheets Of All Types, Sizes, Shapes And At All Heights And Levels, Including Careful Removal Of All Associated Accessories, Fixtures, Fasteners, Flashings, Gutters And Other Fittings, As Required, Using Suitable Methods, Tools And Tackles And Taking All Necessary Precautions To Prevent Damage To The Adjoining Structure And Property. The Dismantled Sheets And Associated Materials Shall Be Carefully Lowered, Handled, Segregated And Temporarily Stacked At The Designated Location Within The Premises And Thereafter Loaded, Transported And Disposed Of Outside The Premises At The Designated Disposal Facility Of The Local Authority Or At Any Other Location Approved/Designated By Balmer Lawrie, As Directed By The Engineer-In-Charge And In Accordance With Applicable Statutory Requirements. The Rate Shall Include All Labour, Machinery, Cutting Tools, Tools And Tackles, Loading, Unloading, Handling, Transportation, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Safety Nets, Barricading And Other Safety Arrangements Required For Safe Execution Of The Work At All Heights And Levels, Complete As Per Specifications And Instructions Of The Engineer-In-Charge. , Providing And Fixing Non-Asbestos, High-Impact Fibre Reinforced Cement Corrugated Roofing Sheets Of 6 Mm Thickness, Blue Colour, Conforming To Is 14871, For Roofing Of Any Pitch, Including Supplying And Fixing With Polymer-Coated J Or L Hooks, 8 Mm Diameter Gi Bolts And Nuts With Plain And Bitumen Washers, Or Approved Self-Drilling Fasteners With Epdm Washers, Including Cutting, Trimming And Fixing To Required Sizes And Shapes Wherever Necessary, Complete As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Item Shall Be Measured Excluding The Cost Of Purlins, Rafters And Trusses. The Rate Shall Include All Materials, Labour, Transportation, Handling, Tools And Tackles, Cutting Equipment, Fasteners, Washers And All Incidental Works Required For Proper Fixing And Completion Of The Roofing. The Rate Shall Also Include Providing And Fixing Temporary Tarpaulin Sheets Of Suitable Thickness Over The Affected Area, Wherever Required, To Protect The Building/Interior And Maintain Weatherproofing Until The New Roofing Sheets Are Fully Installed. The Rate Shall Further Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Safety Nets And Other Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Fixing 600 Mm Diameter Turbo Ventilator Of Approved Make, Conforming To The Manufacturers Specifications And Recommendations, Including Supply, Transportation, Handling, Assembling And Fixing Of The Turbo Ventilator At The Required Location, Complete With All Necessary Supporting Frame, Brackets, Clamps, Fasteners, Nuts, Bolts, Sealants And Other Accessories Required For Proper Fixing And Weather-Tight Installation, Complete In All Respects As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Materials, Labour, Tools And Tackles, Machinery, Lifting And Handling Arrangements And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Fixing Solid Polycarbonate Roofing Sheets Of 2 Mm Thickness, Having Suitable Embossments/Profile On The Underside To Match The Existing/Proposed Roofing Profile, With Uv-Protective Coating/Film On The Exposed Top Surface And Capable Of Providing Approximately 80% Light Transmission, At All Heights And Levels, Including Cutting, Trimming And Fixing To Required Sizes And Shapes Wherever Necessary. The Sheets Shall Be Fixed Strictly In Accordance With The Manufacturers Recommendations Using Approved Compatible Fasteners, Profiles, Washers, Sealants, Flashing And All Other Necessary Accessories, Including Provision Of Required Side And End Laps And Proper Sealing Of Joints To Ensure A Durable, Watertight And Leak-Proof Installation During Rains, Complete In All Respects As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Materials, Labour, Transportation, Handling, Tools And Tackles, Cutting Equipment, Fasteners, Washers, Sealants And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Safety Nets And Other Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Applying Anti-Corrosive High-Build Epoxy Coating System, Or Approved Equivalent, To Existing Structural Steel Members And Surfaces Including Structural Angles, Pipes, Tanks, Ladders And Other Structural Elements, At All Heights And Levels, As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Work Shall Include Thorough Preparation And Cleaning Of The Existing Surface By Removing Rust, Mill Scale, Dust, Dirt, Grease, Loose Paint And Other Contaminants By Suitable Mechanical/Approved Methods. On Rusted Areas, One Coat Of Approved Rust-Converter/Passivating Chemical Shall Be Applied To Arrest And Passivate Residual Rust, Strictly As Per The Manufacturers Recommendations. Thereafter, One Coat Of Approved Protective Coating Such As Berger Protectomastic Or Equivalent, Suitable For Providing Galvanic/Corrosion Protection, Shall Be Applied In Accordance With The Manufacturers Specifications. Over The Same, Two Coats Of Approved High-Build Anti-Corrosive Epoxy Coating, Such As Epilux 155 Hb, Epilux 89 Hb, Epilux 4 Or Equivalent, Of Approved Colour And Shade Shall Be Applied To Achieve The Specified Dry Film Thickness And Uniform Finish. The Rate Shall Include All Materials, Surface Preparation, Rust Converter, Protective Coating, Epoxy Coating, Labour, Machinery, Tools And Tackles, Consumables, Transportation, All Leads And Lifts And All Incidental Works Required For Complete And Satisfactory Execution. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Fixing Gutters Made Of 2 Mm Thick Galvanised Iron (Gi) Sheet, Having Zinc Coating Not Less Than 275 G/M², Of Required Size, Shape And Profile, Including Cutting, Bending, Forming, Jointing And Fixing Complete With All Necessary Fittings, Joints, Brackets, Supports, Fasteners, Sealants And Accessories, As Required For Proper And Watertight Installation. The Gutter Shall Be Securely Supported With 50 × 6 Mm Ms Flat Clamps At Maximum 600 Mm Centre To Centre Spacing, Including Necessary Bends, Outlets, End Closures And Cut-Outs For Connection To Down-Take Pipes, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Materials, Labour, Transportation, Handling, Tools And Tackles, Welding/Fixing Consumables, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion Of The Work. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Dismantling And Removal Of Existing Rainwater Down-Take Pipes Of Any Diameter, Material, Size And Configuration, Including Removal Of All Associated Clamps, Brackets, Supports, Joints, Fittings And Connections, As Required, At All Heights And Levels, By Adopting Suitable Methods And Precautions So As To Avoid Damage To The Adjoining Structure And Finishes. The Dismantled Pipes And Associated Materials Shall Be Carefully Lowered, Handled, Segregated, Stacked And Loaded, And Thereafter Transported And Disposed Of Outside The Premises At A Disposal Facility/Location Permitted By The Local Authority And In Accordance With Applicable Statutory Requirements, As Directed By The Engineer-In-Charge. The Rate Shall Include All Labour, Machinery, Cutting Tools, Tools And Tackles, Lifting And Handling Arrangements, Loading, Unloading, Transportation, All Leads And Lifts And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms, Safety Nets, Barricading And Other Safety Arrangements Required For Carrying Out The Work Safely At All Heights And Levels, Complete As Per Specifications And Instructions Of The Engineer-In-Charge. , Providing And Fixing Rainwater Down-Take Pipes Of 150 Mm Diameter, Of Approved Make And Material, Including All Necessary Bends, Shoes, Offsets, Sockets, Couplings, Clamps, Brackets, Supports, Joints, Sealants And Other Required Fittings And Accessories, Complete In All Respects As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. The Pipes Shall Be Securely Fixed To The Supporting Structure With 50 × 6 Mm Gi/Ms Flats Or Approved Equivalent Clamps At Maximum 600 Mm Centre To Centre Spacing, Including All Necessary Connections To Gutters, Outlets And Drainage Arrangements, Complete. The Rate Shall Include All Materials, Labour, Transportation, Handling, Tools And Tackles, Cutting And Jointing, All Leads And Lifts And All Incidental Works Required For Proper, Rigid And Leak-Proof Installation. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Applying Polyurethane (Pu) Waterproof Coating System Of Minimum 500 Micron Dry Film Thickness To Existing Gutters, Including Thorough Cleaning And Preparation Of The Gutter Surface By Removing Debris, Dirt, Dust, Loose Material, Rust And Other Contaminants, Complete. The Work Shall Include Opening, Cleaning And Sealing Of All Joints, Corners, Junctions, Downspout Connections And Other Vulnerable Locations Using Approved Ms Polymer Sealant And Compatible Waterproofing Tape, Followed By Application Of Approved Primer And Two Coats Of Polyurethane Waterproof Coating, Strictly In Accordance With The Manufacturers Recommendations And As Approved By The Engineer-In-Charge. The Coating Shall Be Applied Uniformly To Achieve A Continuous, Durable And Watertight Finish, Including Treatment Of All Laps, Joints, Outlets And Penetrations To Prevent Leakage During Rains. The Rate Shall Include All Materials, Primer, Pu Coating, Ms Polymer Sealant, Waterproofing Tape, Labour, Surface Preparation, Tools And Tackles, Machinery, Consumables, Transportation, All Leads And Lifts And All Incidental Works Required For Complete And Satisfactory Execution. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. , Carefully Dismantling And Removing Existing Cement Jali Of All Sizes And Patterns, At All Heights And Levels, Including Removal Of All Fixing Materials, Supports And Accessories As Required, Taking Necessary Precautions To Avoid Damage To The Adjoining Masonry, Rcc And Finishes Complete In All Respects As Per Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include Labour, Transportation, Handling, Tools And Tackles, Removal Of Debris And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Fixing Precast Reinforced Cement Concrete (Rcc Jali Of Approved Design, Pattern And Size, Manufactured Using Cement, Coarse/Fine Aggregate And Reinforcement As Specified, With Minimum M-20 Grade Concrete, Properly Compacted And Cured, Including Providing Necessary Reinforcement Bars/Wire Mesh, Moulds And Formwork, Lifting, Handling And Transportation.The Rcc Jali Shall Be Fixed In Position In Masonry/Openings Or As Shown In The Approved Drawings, Using Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Or Approved Fixing Material, Including Making Good The Joints And Adjoining Surfaces, Providing Necessary Supports, Clamps, Dowels Or Holdfasts Wherever Required, And Ensuring Proper Line, Level, Plumb And Alignment.The Exposed Surfaces Shall Be Finished Smooth And Free From Cracks, Honeycombing And Other Defects, Including Cutting/Fitting At Corners And Junctions Wherever Required. The Work Shall Include All Materials, Reinforcement, Moulds, Mortar, Supports, Scaffolding, Labour, Transportation, Loading/Unloading, Tools And Tackles And All Incidental Works Necessary For Complete Installation. , Providing And Fixing Nylon Pigeon/Bird Protection Net (Kabutar Jali) Of Approved Make And Quality, Having Approximately 40 Mm × 40 Mm Mesh Size, At All Required Locations, Heights And Levels, Including Cutting, Trimming And Fixing To Required Sizes And Shapes, With Suitable Uv-Stabilised Nylon Netting And All Necessary Approved Fixing Accessories Such As Hooks, Clamps, Fasteners, Anchors, Brackets, Supporting Wires/Ropes And Other Fittings, As Required To Ensure A Taut, Secure And Durable Installation. The Work Shall Include All Materials, Labour, Transportation, Handling, Tools And Tackles And Incidental Works Required For Satisfactory Completion, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Terrace Waterproofing: Carefully Dismantling And Removing The Existing Waterproofing Treatment Including Existing Tiles, Mortar Beds And Other Associated Layers, Wherever Required, And Disposing Of The Debris As Directed By The Engineer-In-Charge. Thereafter, Providing And Laying Integral Cement-Based Waterproofing Treatment To Roofs, Terraces And Balconies, Including Preparation And Cleaning Of The Rcc Surface And Treatment Of Adjoining Walls Up To 300 Mm Height, Comprising The Following Operations: (A) Applying And Grouting A Slurry Coat Of Neat Cement Using 2.75 Kg Of Cement Per Sq.M, Admixed With Approved Proprietary Waterproofing Compound Conforming To Is 2645, Over The Prepared Rcc Slab; (B) Laying A 20 Mm Thick Layer Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand), Admixed With Approved Waterproofing Compound, To The Required Slope, Followed By Laying Cement Concrete Using Brick Bats/Broken Bricks Of 25 Mm To 100 Mm Size, With 50% Cement Mortar 1:5 Admixed With Approved Waterproofing Compound, Including Proper Compaction And Treatment Of Junctions And Rounding Of Corners; (C) After Adequate Curing, Applying A Second Coat Of Cement Slurry Admixed With Approved Waterproofing Compound Conforming To Is 2645; (D) Providing A 20 Mm Thick Jointless Finishing Layer Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Admixed With Approved Waterproofing Compound, Finished With Neat Cement Slurry And Trowelled Smooth, Including Formation Of 300 Mm × 300 Mm Panels/Squares As Directed; And (E) Flooding The Completed Terrace With Water For A Minimum Period Of Two Weeks For Curing And Final Leak Testing, Including Rectification Of Any Leakage/Defects Observed During Testing, Complete. The Rate Shall Include All Materials, Labour, Transportation, Tools And Tackles, Curing, Disposal Of Dismantled Materials/Debris And All Incidental Works Required For Complete Execution. The Rate Shall Also Include All Necessary Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete As Per Drawings, Specifications, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. , Providing And Applying Two Coats Of Approved Quality Plastic Emulsion Paint Of Approved Make, Shade And Colour Over A Coat Of Suitable Primer Of Approved Make On Prepared Wall Surfaces, Including Thorough Cleaning And Preparation Of The Surface, Removal Of Loose Paint, Dust, Dirt And Other Foreign Matter, Filling And Making Good Minor Surface Imperfections Wherever Required, Sanding, Application Of One Coat Of Approved Primer And Two Coats Of Plastic Emulsion Paint To Achieve A Smooth, Uniform And Even Finish, Complete In All Respects As Per The Manufacturers Recommendations, Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Materials, Primer, Paint, Labour, Surface Preparation, Tools And Tackles, Brushes/Rollers, Consumables, Transportation And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , External Wall Painting: Providing And Applying Two Coats Of Approved Quality Exterior-Grade Weather-Resistant Acrylic Emulsion Paint, Such As Apex Ultima Protek Of Asian Paints Or Approved Equivalent, Of Approved Shade And Colour, Over Prepared External Plastered Surfaces, Including Thorough Cleaning And Preparation Of The Surface By Wire/Hard Brushing And Removal Of Dust, Dirt, Loose Particles, Existing Flaking Paint, Fungus, Algae And Other Surface Contaminants, Followed By Application Of Suitable Exterior-Grade Primer Wherever Required/Recommended By The Manufacturer. The Paint Shall Be Applied Uniformly In Two Coats To Achieve A Smooth, Even And Durable Finish, Complete In All Respects As Per The Manufacturers Recommendations, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Materials, Primer, Paint, Labour, Surface Preparation, Tools And Tackles, Consumables, Transportation And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete , Enamel Painting: Providing And Applying One Coat Of Approved Quality Wall Primer Suitable For Existing/New Steel Surfaces, After Thorough Cleaning And Preparation Of The Surfaces, Including Removal Of Oil, Grease, Dirt, Dust, Rust, Loose Paint And Other Contaminants, Particularly In Areas Affected By Oil Spillage, Up To A Height Of 1.50 M, Followed By Application Of Two Coats Of Superior Quality Synthetic Enamel Paint Of Approved Make, Such As Ici Or Equivalent, In Approved Shade And Colour, Over All Existing And New Steel Surfaces, Including Structural Steel Members, As Required, Complete In All Respects As Per The Manufacturers Recommendations, Specifications And Instructions Of The Engineer-In-Charge. The Work Shall Include Necessary Surface Preparation, Cleaning, Sanding/Wire Brushing, Primer Application And Enamel Painting To Achieve A Smooth, Uniform And Durable Finish. The Rate Shall Include All Materials, Primer, Enamel Paint, Labour, Tools And Tackles, Brushes/Rollers, Consumables, Transportation And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Same As Above But Providing Two Coats Of Enamel Paint Over A Steel Primer Coat On Handrails. , Same As Above But For Letter Printing By Making First Background In Colour As Per The Instruction Of Bl Official And Then Writing Letters On That At Various Locations On The Wall/ Steel As Directed By Bl Official. The Measurement Of Border Area Will Be Considered For Payment. , Enamel Painting To Staircase Railings: Providing And Applying One Coat Of Approved Quality Metal/Steel Primer Over Existing And New Steel Staircase Railings, After Thorough Cleaning And Preparation Of The Surfaces, Including Removal Of Oil/Grease Spillage, Dust, Dirt, Rust, Loose Paint And Other Surface Contaminants, Particularly Up To A Height Of 1.50 M, Followed By Application Of Two Coats Of Superior Quality Synthetic Enamel Paint Of Approved Make, Such As Ici Or Equivalent, In Approved Shade And Colour, To Achieve A Smooth, Uniform And Durable Finish, Complete In All Respects As Per The Manufacturers Recommendations, Specifications And Instructions Of The Engineer-In-Charge. The Item Shall Include All Surface Preparation, Scraping, Wire Brushing/Sanding, Cleaning, Primer And Enamel Coats, Including Labour, Materials, Tools And Tackles, Brushes/Rollers, Consumables And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Painting Work To All Staircase Railings At All Heights And Levels, Complete. , Carefully Removing, Dismantling And Taking Down Existing Electrical Cables/Wires/Conduits/Light Fittings Of All Sizes, Types And Configurations, Wherever Required For Execution Of Repair Works, Including Removal Of Existing Clamps, Saddles, Supports, Ties And Other Associated Accessories, With Due Care To Avoid Damage To The Cables/Wires/Light Fittings And Adjoining Structure. The Removed Cables Shall Be Properly Identified, Coiled, Protected And Safely Stored At A Location As Directed By The Engineer-In-Charge And, After Completion Of The Repair Works, Shall Be Re-Fixed/Reinstalled At Their Original Or Approved Locations, Including Providing All Necessary Additional Accessories, Clamps, Saddles, Supports, Connectors, Termination Materials And Other Required Fittings, Wherever Necessary. The Work Shall Include Proper Routing, Alignment, Securing, Reconnection And Testing Of The Cables After Reinstatement, Complete In All Respects As Per Applicable Electrical Safety Requirements, Drawings, Specifications And Instructions Of The Engineer-In-Charge. The Rate Shall Include All Labour, Materials, Equipment, Tools And Tackles, Consumables, Transportation, Handling And All Incidental Works Required For Satisfactory Completion. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Providing And Fixing Aluminium Composite Panel (Acp) Boxing/Cladding Of Exterior Grade, 4 Mm Overall Thickness, Comprising Aluminium Skins Of 0.5 Mm Thickness Each With 3 Mm Ldpe/Mineral Or Approved Core, With Pvdf Coating, Using Approved Make Such As Eurobond, Alubond, Alukbond Or Equivalent, Including All Necessary Fabrication, Cutting, Bending, Grooving, Routing And Fixing To The Required Shape And Profile. The Work Shall Include Providing And Fixing Suitable Aluminium Sections/Sub-Frame, Brackets, Cleats, Fasteners, Rivets, Screws And Other Hardware, Including Application Of Approved High-Performance Weather-Resistant Silicone Sealant Such As Dow Corning 789 Or Equivalent, Masking Tape And Necessary Joint Treatment To Achieve A Neat, Uniform And Weather-Tight Finish. The Acp Surfaces Shall Be Provided With Approved-Quality Digitally Printed Graphics/Logo Duly Matt Laminated, As Required, With The Size And Design Of The Logo/Graphics As Provided/Approved By Balmer Lawrie (Bl). The Rate Shall Include All Materials, Fabrication, Labour, Transportation, Handling, Cutting, Fixing, Sealants, Hardware, Consumables, Tools And Tackles, Lifting Arrangements And All Incidental Works Required For Satisfactory Completion Of The Finished Item, Complete As Per Approved Drawings, Manufacturers Recommendations And Instructions Of The Engineer-In-Charge. The Rate Shall Also Include Providing, Erecting And Dismantling Necessary Ms Scaffolding, Staging, Working Platforms And Safety Arrangements Required For Carrying Out The Work At All Heights And Levels, Complete. , Dismantling Existing Aluminium Glazed Windows Including Aluminium Frames, Shutters, Glass, Fittings, Fixtures And Fasteners, Carefully Removing The Same Without Damaging The Adjoining Masonry/Plaster, Stacking Serviceable Materials As Directed By The Engineer-In-Charge And Removing/Disposal Of Unserviceable Materials And Debris As Directed, Including Making Good The Damaged Portions Of Masonry/Plaster. , Providing And Fixing Factory-Made Upvc White/Approved Colour Glazed Sliding/Casement Windows Comprising Multi-Chambered Upvc Extruded Profiles Of Approved Make And Suitable Series, Duly Reinforced With 1.60 ± 0.20 Mm Thick Galvanized Mild Steel Sections Of Required Length And Suitable Profile, With Upvc Glazing Beads, Epdm Gaskets, Gi Fasteners, Plastic Packers/Caps And Ss Screws. Frames And Shutters Shall Be Mitre-Cut And Fusion-Welded At Corners, Including Mullions/Intermediate Sections Wherever Required, Drilling Of Holes For Fixing Hardware And Drainage Of Water, Complete As Per Approved Drawings And Direction Of Engineer-In-Charge. The Window Shall Be Complete With 5 Mm Thick Clear/Toughened Glass, As Specified, Including Approved Quality Ss-304 Hardware/Fittings Such As Handles, Locks, Rollers, Friction Stays/Hinges, Restrictors And Other Necessary Accessories, Including Fixing The Frame To The Existing Opening With Suitable Anchor Fasteners, Filling The Gap Between Frame And Adjoining Wall With Approved Weatherproof Silicone Sealant Over Backer Rod, Making Good The Surrounding Masonry/Plaster And Finishing Complete. The Item Shall Include All Materials, Labour, Dismantling, Loading, Unloading, Transportation, Scaffolding, Tools And Tackles, Disposal Of Debris, Making Good, Sealants, Hardware, Fixing Accessories And All Incidental Works Necessary For Completion. , Dismantling And Removing Existing False Ceiling Of Any Type Including Gypsum Board, Mineral Fibre, Aluminium, Grid Suspension System, Hangers, Channels, Framework, Fixtures And Fittings, Carefully Dismantling Without Damaging The Existing Structure, Services And Adjoining Finishes, Stacking Serviceable Materials As Directed By The Engineer-In-Charge And Disposal Of Unserviceable Material/Debris Outside The Premises As Directed, Including All Necessary Scaffolding, Tools And Tackles. , Providing And Fixing Pvc False Ceiling Comprising Factory-Made Pvc Panels Of Approved Make, Colour, Texture And Design, Minimum 6 Mm Thick, Of Suitable Width, Fixed On A Concealed/Exposed Gi Framing System Comprising Gi Perimeter Channels, Intermediate Channels, Suspenders, Hangers, Clips, Gi Screws And Other Required Accessories, Properly Levelled And Aligned, Including Cutting And Fixing Around Columns, Beams, Walls, Electrical Fixtures, Light Fittings, Ac Diffusers, Access Panels And Other Services. The Pvc Panels Shall Be Properly Jointed And Fixed To Provide A Neat, Uniform And Level Ceiling Surface, Including All Necessary Gi Framework, Suspension Arrangements, Fasteners, Edge Trims, Mouldings, Corner Profiles, Finishing Accessories And Making Good Around All Openings. The Item Shall Also Include Providing Necessary Access Panels Wherever Required For Maintenance Of Concealed Services. , Supply, Installation And Commissioning Of Approved Make Floor Mounted Ewc (European Water Closet) P Or S Trap With Dual Flush Porcelain Cistern Fixed On Ewc With All Internal Parts Of Dual Flush Cistern, Ultra Solid Seat Cover Of Approved Make With Rubber Buffer And Cap 15 Mm Angle Stop Cock 450 Mm Long Pvc Inter Connection Pipe Wall Flanges All Of Approved Make Etc. Complete For Finished Item Of Work In All Respects: Supply & Fixing Of Bibcock Cum Health Faucet With 1M Long Tube And Wall Hook Of Jaquar Continental Series Or Approved Equivalent, Chrome Finish With 7 Years Warranty / Jupiter Aqua Lines-Jalor Equivalent Series.
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Excavation in all types of soil, including ordinary soil, hard soil and other strata encountered, by manual and/or mechanical means, to the required lines, levels, grades and dimensions as specified and directed by the Engineer-in-Charge, including all labour, tools, tackles, plant, machinery, dewatering, shoring and strutting wherever required, lifting, loading, handling and transportation of excavated material. The excavated earth shall be suitably stacked for reuse or disposed of at the designated location, as directed by the Engineer-in-Charge. The item shall also include dressing and leveling of the excavated surface and backfilling with suitable excavated earth or approved filling material, in layers with watering and compaction, wherever required, complete in all respects as per specifications and instructions of the Engineer-in-Charge. | Excavation in all types of soil, including ordinary soil, hard soil and other strata encountered, by manual and/or mechanical means, to the required lines, levels, grades and dimensions as specified and directed by the Engineer-in-Charge, including all labour, tools, tackles, plant, machinery, dewatering, shoring and strutting wherever required, lifting, loading, handling and transportation of excavated material. The excavated earth shall be suitably stacked for reuse or disposed of at the designated location, as directed by the Engineer-in-Charge. The item shall also include dressing and leveling of the excavated surface and backfilling with suitable excavated earth or approved filling material, in layers with watering and compaction, wherever required, complete in all respects as per specifications and instructions of the Engineer-in-Charge. |
| 2 | Dismantling of cement concrete and/or reinforced cement concrete work of any grade, at all heights and levels, by manual and/or mechanical means, including all labour, tools, tackles, plant and machinery, cutting of reinforcement, wherever required, and providing, erecting and dismantling of necessary scaffolding, staging, working platforms and other temporary arrangements for safe execution of the work. The item shall include breaking, dismantling, removal, collection, stacking of serviceable materials as directed by the Engineer-in-Charge, loading, handling, transportation and disposal of all debris and unserviceable dismantled materials outside the factory premises at an approved/designated disposal location, including all leads, lifts, loading/unloading, tipping/disposal charges and all incidental costs, complete as per CPWD Specifications and to the satisfaction of the Engineer-in-Charge, with no extra payment on any account. | Dismantling of cement concrete and/or reinforced cement concrete work of any grade, at all heights and levels, by manual and/or mechanical means, including all labour, tools, tackles, plant and machinery, cutting of reinforcement, wherever required, and providing, erecting and dismantling of necessary scaffolding, staging, working platforms and other temporary arrangements for safe execution of the work. The item shall include breaking, dismantling, removal, collection, stacking of serviceable materials as directed by the Engineer-in-Charge, loading, handling, transportation and disposal of all debris and unserviceable dismantled materials outside the factory premises at an approved/designated disposal location, including all leads, lifts, loading/unloading, tipping/disposal charges and all incidental costs, complete as per CPWD Specifications and to the satisfaction of the Engineer-in-Charge, with no extra payment on any account. |
| 3 | Dismantling of brickwork of all thicknesses, at all heights and levels, wherever required and as directed by the Engineer-in-Charge, by manual and/or mechanical means, including all labour, tools, tackles, plant and machinery, and cutting of grooves/chases wherever required. The item shall include providing, erecting and dismantling of necessary scaffolding, staging and working platforms, along with green netting or hessian cloth as required for safe execution of the work and protection of adjoining areas. It shall further include breaking, dismantling, removal, collection, handling, loading, transportation and disposal of all debris and unserviceable materials generated from the dismantling work outside the factory premises at an approved/designated disposal location, including all leads, lifts, loading/unloading, tipping/disposal charges and all incidental costs, complete as per CPWD Specifications and to the satisfaction of the Engineer-in-Charge, with no extra payment on any account. | Dismantling of brickwork of all thicknesses, at all heights and levels, wherever required and as directed by the Engineer-in-Charge, by manual and/or mechanical means, including all labour, tools, tackles, plant and machinery, and cutting of grooves/chases wherever required. The item shall include providing, erecting and dismantling of necessary scaffolding, staging and working platforms, along with green netting or hessian cloth as required for safe execution of the work and protection of adjoining areas. It shall further include breaking, dismantling, removal, collection, handling, loading, transportation and disposal of all debris and unserviceable materials generated from the dismantling work outside the factory premises at an approved/designated disposal location, including all leads, lifts, loading/unloading, tipping/disposal charges and all incidental costs, complete as per CPWD Specifications and to the satisfaction of the Engineer-in-Charge, with no extra payment on any account. |
| 4 | Surface preparation by hacking the existing concrete surface and removal of all loose, spalled and distressed concrete around the affected RCC elements, including exposing the sound concrete surface, as required and as directed by the Engineer-in-Charge. The rate shall be inclusive of providing, erecting and dismantling the required MS scaffolding and staging for carrying out the work safely, including providing and fixing of hessian cloth covering, wherever required, as per the instructions of the Engineer-in-Charge. The rate shall be inclusive of carrying out the work on structures of all shapes, sizes, heights and configurations. Any reinforcement steel exposed or removed during the hacking process shall be carefully segregated and handed over to the designated officer of Balmer Lawrie. The rate shall be inclusive of all labour, tools, tackles, equipment and incidental works necessary for satisfactory completion of the work. | Surface preparation by hacking the existing concrete surface and removal of all loose, spalled and distressed concrete around the affected RCC elements, including exposing the sound concrete surface, as required and as directed by the Engineer-in-Charge. The rate shall be inclusive of providing, erecting and dismantling the required MS scaffolding and staging for carrying out the work safely, including providing and fixing of hessian cloth covering, wherever required, as per the instructions of the Engineer-in-Charge. The rate shall be inclusive of carrying out the work on structures of all shapes, sizes, heights and configurations. Any reinforcement steel exposed or removed during the hacking process shall be carefully segregated and handed over to the designated officer of Balmer Lawrie. The rate shall be inclusive of all labour, tools, tackles, equipment and incidental works necessary for satisfactory completion of the work. |
| 5 | Removal of Damaged Reinforcement / Structural Steel: Carefully cutting, removing and dismantling damaged, corroded or otherwise defective reinforcement bars and structural steel members from the existing RCC/structural elements, as identified and directed by the Engineer-in-Charge, including handling, segregation, stacking and transportation of the dismantled steel to the designated storage yard within the premises. The rate shall be inclusive of providing, erecting and dismantling the required MS staging/scaffolding, including providing and fixing green netting for safety and protection, as directed by the Engineer-in-Charge. The rate shall also include all necessary labour, tools, tackles, cutting equipment, lifting arrangements and incidental works required for safe and complete execution. The recovered reinforcement/structural steel shall remain the property of Balmer Lawrie and shall be handed over to the designated officer. | Removal of Damaged Reinforcement / Structural Steel: Carefully cutting, removing and dismantling damaged, corroded or otherwise defective reinforcement bars and structural steel members from the existing RCC/structural elements, as identified and directed by the Engineer-in-Charge, including handling, segregation, stacking and transportation of the dismantled steel to the designated storage yard within the premises. The rate shall be inclusive of providing, erecting and dismantling the required MS staging/scaffolding, including providing and fixing green netting for safety and protection, as directed by the Engineer-in-Charge. The rate shall also include all necessary labour, tools, tackles, cutting equipment, lifting arrangements and incidental works required for safe and complete execution. The recovered reinforcement/structural steel shall remain the property of Balmer Lawrie and shall be handed over to the designated officer. |
| 6 | Anti-Corrosive Treatment for Reinforcement Bars: Cleaning of exposed reinforcement bars thoroughly by wire brushing to remove rust, scale, loose particles and other deleterious materials, followed by application of approved anti-corrosive zinc-rich epoxy primer to the prepared reinforcement, complete as directed by the Engineer-in-Charge. The rate shall include the cost of all materials, labour, tools, tackles, equipment and incidental works required for complete execution. For measurement purposes, the concrete surface around the exposed reinforcement shall be considered to an extent of 50 mm width all around the exposed reinforcement. The rate shall also be inclusive of providing, erecting and dismantling the required MS scaffolding/staging, including providing and fixing of green netting for safety and protection, as directed by the Engineer-in-Charge. | Anti-Corrosive Treatment for Reinforcement Bars: Cleaning of exposed reinforcement bars thoroughly by wire brushing to remove rust, scale, loose particles and other deleterious materials, followed by application of approved anti-corrosive zinc-rich epoxy primer to the prepared reinforcement, complete as directed by the Engineer-in-Charge. The rate shall include the cost of all materials, labour, tools, tackles, equipment and incidental works required for complete execution. For measurement purposes, the concrete surface around the exposed reinforcement shall be considered to an extent of 50 mm width all around the exposed reinforcement. The rate shall also be inclusive of providing, erecting and dismantling the required MS scaffolding/staging, including providing and fixing of green netting for safety and protection, as directed by the Engineer-in-Charge. |
| 7 | Providing and Fixing of Shear Connectors: Providing and fixing shear connectors to existing RCC/structural concrete members, including drilling of 12 mm diameter holes to a depth of 50–75 mm in the existing concrete, cleaning of drilled holes and fixing 8 mm diameter reinforcement bars as shear connectors using approved chemical/anchor grout such as Sysgrout 657 or equivalent, complete as directed by the Engineer-in-Charge. The rate shall include all materials, anchor grout, drilling, labour, tools, tackles, equipment and incidental works required for complete execution. The quantity of reinforcement steel used for shear connectors shall be measured and paid for separately under the relevant item. The rate shall also be inclusive of providing, erecting and dismantling the required MS scaffolding/staging, including providing and fixing of green netting for safety and protection, as directed by the Engineer-in-Charge. | Providing and Fixing of Shear Connectors: Providing and fixing shear connectors to existing RCC/structural concrete members, including drilling of 12 mm diameter holes to a depth of 50–75 mm in the existing concrete, cleaning of drilled holes and fixing 8 mm diameter reinforcement bars as shear connectors using approved chemical/anchor grout such as Sysgrout 657 or equivalent, complete as directed by the Engineer-in-Charge. The rate shall include all materials, anchor grout, drilling, labour, tools, tackles, equipment and incidental works required for complete execution. The quantity of reinforcement steel used for shear connectors shall be measured and paid for separately under the relevant item. The rate shall also be inclusive of providing, erecting and dismantling the required MS scaffolding/staging, including providing and fixing of green netting for safety and protection, as directed by the Engineer-in-Charge. |
| 8 | Drilling and Fixing of Main Reinforcement Bars in RCC Columns and Beams: Drilling of 16/20 mm diameter holes to a depth of 120–150 mm in existing RCC columns and beams and fixing 12/16 mm diameter reinforcement bars using approved chemical anchor/grout such as Sysgrout 657 or equivalent, complete as per the specifications and as directed by the Engineer-in-Charge. The rate shall include drilling, cleaning of holes, approved anchoring material, labour, tools, tackles, equipment and all incidental works required for complete execution. The reinforcement steel quantity shall be measured and paid for separately under the relevant item. The rate shall also be inclusive of providing, erecting and dismantling the required MS staging/scaffolding for carrying out the work safely, as directed by the Engineer-in-Charge. | Drilling and Fixing of Main Reinforcement Bars in RCC Columns and Beams: Drilling of 16/20 mm diameter holes to a depth of 120–150 mm in existing RCC columns and beams and fixing 12/16 mm diameter reinforcement bars using approved chemical anchor/grout such as Sysgrout 657 or equivalent, complete as per the specifications and as directed by the Engineer-in-Charge. The rate shall include drilling, cleaning of holes, approved anchoring material, labour, tools, tackles, equipment and all incidental works required for complete execution. The reinforcement steel quantity shall be measured and paid for separately under the relevant item. The rate shall also be inclusive of providing, erecting and dismantling the required MS staging/scaffolding for carrying out the work safely, as directed by the Engineer-in-Charge. |
| 9 | Providing and Fixing of Cold Twisted HYSD Reinforcement Steel Bars: Providing and fixing cold twisted HYSD reinforcement steel bars of various diameters, of approved make, for RCC works, including straightening, cutting, bending, placing, binding, welding or fabrication, as required, and securely fixing the reinforcement in position complete, all as per the approved drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all labour, materials, tools, tackles, equipment and incidental works required for complete execution. Reinforcement steel shall be measured for payment by weight in accordance with the relevant IS Codes and approved bar bending schedules. No separate measurement or payment shall be made for binding wire, laps, chairs, supports or other incidental fixing accessories, wherever applicable. The rate shall also be inclusive of providing, erecting and dismantling all required MS scaffolding and staging for carrying out the work safely at all heights and levels, as directed by the Engineer-in-Charge. | Providing and Fixing of Cold Twisted HYSD Reinforcement Steel Bars: Providing and fixing cold twisted HYSD reinforcement steel bars of various diameters, of approved make, for RCC works, including straightening, cutting, bending, placing, binding, welding or fabrication, as required, and securely fixing the reinforcement in position complete, all as per the approved drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all labour, materials, tools, tackles, equipment and incidental works required for complete execution. Reinforcement steel shall be measured for payment by weight in accordance with the relevant IS Codes and approved bar bending schedules. No separate measurement or payment shall be made for binding wire, laps, chairs, supports or other incidental fixing accessories, wherever applicable. The rate shall also be inclusive of providing, erecting and dismantling all required MS scaffolding and staging for carrying out the work safely at all heights and levels, as directed by the Engineer-in-Charge. |
| 10 | Providing and carrying out core cutting of 75/100 mm diameter through existing RCC slab, for the full depth of the slab, at required locations for making provisions for concreting of column/beam encasement, including setting up and operation of suitable core cutting machinery, drilling, cutting and removal of the core, handling and disposal of cut-out material/debris as directed, including all labour, materials, machinery, tools and tackles, consumables and incidentals, complete as per the drawings, specifications and instructions of the Engineer-in-Charge. The rate shall be inclusive of all necessary scaffolding, staging, working platforms and safety arrangements required for executing the work at all heights and levels. | Providing and carrying out core cutting of 75/100 mm diameter through existing RCC slab, for the full depth of the slab, at required locations for making provisions for concreting of column/beam encasement, including setting up and operation of suitable core cutting machinery, drilling, cutting and removal of the core, handling and disposal of cut-out material/debris as directed, including all labour, materials, machinery, tools and tackles, consumables and incidentals, complete as per the drawings, specifications and instructions of the Engineer-in-Charge. The rate shall be inclusive of all necessary scaffolding, staging, working platforms and safety arrangements required for executing the work at all heights and levels. |
| 11 | Providing and laying machine-mixed, mechanically vibrated reinforced cement concrete of M-25 grade using 20 mm nominal size and down graded graded stone aggregate, including mixing, placing, compacting by vibration, finishing, curing and all necessary centering and shuttering, complete in all respects, for all levels and at all heights, as per the drawings, specifications and instructions of the Engineer-in-Charge. Where the quantity of work is sufficient and feasible for execution through Ready Mix Concrete (RMC), preference shall be given to the use of RMC conforming to relevant IS Codes and approved by the Engineer-in-Charge. The minimum cement content shall be 300 kg per cubic metre of concrete. The rate shall be inclusive of all materials, labour, machinery, equipment, tools and tackles, transportation, handling, placing, pumping wherever required, and all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and laying machine-mixed, mechanically vibrated reinforced cement concrete of M-25 grade using 20 mm nominal size and down graded graded stone aggregate, including mixing, placing, compacting by vibration, finishing, curing and all necessary centering and shuttering, complete in all respects, for all levels and at all heights, as per the drawings, specifications and instructions of the Engineer-in-Charge. Where the quantity of work is sufficient and feasible for execution through Ready Mix Concrete (RMC), preference shall be given to the use of RMC conforming to relevant IS Codes and approved by the Engineer-in-Charge. The minimum cement content shall be 300 kg per cubic metre of concrete. The rate shall be inclusive of all materials, labour, machinery, equipment, tools and tackles, transportation, handling, placing, pumping wherever required, and all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 12 | Providing and laying self-compacting reinforced cement concrete of M-30 grade for columns, sunshades and other structural members, using 12 mm nominal size graded coarse aggregate, silica fume, polypropylene fibres and suitable approved chemical admixtures, as required, including batching, mixing, transportation, pumping, placing and pouring of concrete, complete in all respects. The concrete shall be capable of achieving adequate flowability, passing ability and stability without conventional mechanical vibration and shall be designed and produced in accordance with relevant IS Codes and as approved by the Engineer-in-Charge. Concrete shall be poured in lifts, with the vertical free fall/pouring height not exceeding 1.50 m at one stretch, to avoid segregation and other defects. The rate shall include all materials, cement, aggregates, silica fume, polypropylene fibres, admixtures, labour, machinery, equipment, pumping, transportation, all leads and lifts, curing, finishing and all incidental works, complete. The rate shall also include providing and maintaining fully leak-proof and rigid centering and shuttering suitable for self-compacting concrete, including all necessary supports, staging and bracing, for all sizes, shapes, heights and levels. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for execution of the work at all heights and levels, complete as per drawings, specifications and instructions of the Engineer-in-Charge. | Providing and laying self-compacting reinforced cement concrete of M-30 grade for columns, sunshades and other structural members, using 12 mm nominal size graded coarse aggregate, silica fume, polypropylene fibres and suitable approved chemical admixtures, as required, including batching, mixing, transportation, pumping, placing and pouring of concrete, complete in all respects. The concrete shall be capable of achieving adequate flowability, passing ability and stability without conventional mechanical vibration and shall be designed and produced in accordance with relevant IS Codes and as approved by the Engineer-in-Charge. Concrete shall be poured in lifts, with the vertical free fall/pouring height not exceeding 1.50 m at one stretch, to avoid segregation and other defects. The rate shall include all materials, cement, aggregates, silica fume, polypropylene fibres, admixtures, labour, machinery, equipment, pumping, transportation, all leads and lifts, curing, finishing and all incidental works, complete. The rate shall also include providing and maintaining fully leak-proof and rigid centering and shuttering suitable for self-compacting concrete, including all necessary supports, staging and bracing, for all sizes, shapes, heights and levels. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for execution of the work at all heights and levels, complete as per drawings, specifications and instructions of the Engineer-in-Charge. |
| 13 | Providing, mixing and laying self-compacting, non-shrink, free-flow high-grade micro concrete of M-50 grade of approved make for strengthening and encasement of existing RCC beams, using 12 mm nominal size graded coarse aggregate and water, together with approved additives/admixtures, strictly in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge, including batching, mixing, transportation, pumping, pouring, placing, finishing and curing, complete in all respects. The micro concrete shall be non-shrink, free-flowing and suitable for structural repair/encasement works, conforming to relevant IS Codes and the manufacturer's technical specifications. The rate shall include all materials, labour, machinery, equipment, tools and tackles, transportation, all leads and lifts and all incidental works necessary for satisfactory completion of the work. The rate shall also include designing, fabricating, erecting and maintaining rigid, adequately supported and completely leak-proof centering and shuttering for beams, including all necessary supports, bracing and sealing arrangements to prevent leakage and bulging during pouring. The shuttering shall be adequately tied using 16 mm diameter tie rods at spacing not exceeding 500 mm centre to centre, or as otherwise approved by the Engineer-in-Charge, to ensure proper alignment and prevent bulging. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for execution of the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. | Providing, mixing and laying self-compacting, non-shrink, free-flow high-grade micro concrete of M-50 grade of approved make for strengthening and encasement of existing RCC beams, using 12 mm nominal size graded coarse aggregate and water, together with approved additives/admixtures, strictly in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge, including batching, mixing, transportation, pumping, pouring, placing, finishing and curing, complete in all respects. The micro concrete shall be non-shrink, free-flowing and suitable for structural repair/encasement works, conforming to relevant IS Codes and the manufacturer's technical specifications. The rate shall include all materials, labour, machinery, equipment, tools and tackles, transportation, all leads and lifts and all incidental works necessary for satisfactory completion of the work. The rate shall also include designing, fabricating, erecting and maintaining rigid, adequately supported and completely leak-proof centering and shuttering for beams, including all necessary supports, bracing and sealing arrangements to prevent leakage and bulging during pouring. The shuttering shall be adequately tied using 16 mm diameter tie rods at spacing not exceeding 500 mm centre to centre, or as otherwise approved by the Engineer-in-Charge, to ensure proper alignment and prevent bulging. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for execution of the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. |
| 14 | Providing and applying polymer modified repair mortar, up to 30 mm thick, for repair of localized spalled, damaged and deteriorated areas of existing RCC beams, columns, slabs and walls, using approved polymer-modifying compound such as SIKA Latex or equivalent, mixed and applied in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge, including preparation of the substrate by removing all loose, cracked and unsound concrete, cleaning and preparing the exposed surface, mixing, application, compaction and finishing of the repair mortar to the required profile and thickness, including curing, complete in all respects. The repair mortar shall be suitable for structural concrete repair and shall conform to relevant IS Codes and manufacturer's technical specifications. The rate shall include all materials, polymer-modifying compound, labour, machinery, equipment, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. | Providing and applying polymer modified repair mortar, up to 30 mm thick, for repair of localized spalled, damaged and deteriorated areas of existing RCC beams, columns, slabs and walls, using approved polymer-modifying compound such as SIKA Latex or equivalent, mixed and applied in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge, including preparation of the substrate by removing all loose, cracked and unsound concrete, cleaning and preparing the exposed surface, mixing, application, compaction and finishing of the repair mortar to the required profile and thickness, including curing, complete in all respects. The repair mortar shall be suitable for structural concrete repair and shall conform to relevant IS Codes and manufacturer's technical specifications. The rate shall include all materials, polymer-modifying compound, labour, machinery, equipment, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall further include all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. |
| 15 | Providing and constructing brick masonry work with best quality, sound, hard, well-burnt locally available burnt clay bricks of approved quality, conforming to relevant IS Codes, in cement mortar 1:6 (1 cement : 6 coarse sand), including soaking of bricks in water, laying, bonding, plumbing, levelling, raking out joints for plastering or pointing wherever required, curing, scaffolding and all incidental works, complete as per drawings, specifications and instructions of the Engineer-in-Charge. The thickness of horizontal and vertical mortar joints shall not exceed 10 mm. The rate shall be applicable for all shapes and sizes, lengths, widths, thicknesses, heights and levels and shall include all materials, labour, transportation, lifts, tools and tackles, necessary MS scaffolding, staging, working platforms and safety arrangements required for execution of the work, complete. | Providing and constructing brick masonry work with best quality, sound, hard, well-burnt locally available burnt clay bricks of approved quality, conforming to relevant IS Codes, in cement mortar 1:6 (1 cement : 6 coarse sand), including soaking of bricks in water, laying, bonding, plumbing, levelling, raking out joints for plastering or pointing wherever required, curing, scaffolding and all incidental works, complete as per drawings, specifications and instructions of the Engineer-in-Charge. The thickness of horizontal and vertical mortar joints shall not exceed 10 mm. The rate shall be applicable for all shapes and sizes, lengths, widths, thicknesses, heights and levels and shall include all materials, labour, transportation, lifts, tools and tackles, necessary MS scaffolding, staging, working platforms and safety arrangements required for execution of the work, complete. |
| 16 | Providing and carrying out crack repair in existing brick masonry walls, including thorough cleaning of the affected area with wire brushes and removal of loose material, existing paint, surface coatings and other external elements as required, cutting and forming a V-groove of minimum 15 mm depth and 5 mm width along the full length of the crack, cleaning and preparing the groove and applying approved polymer-modified crack repair filler/putty such as \\"SmartCare Crack Seal\\" of Asian Paints or equivalent, strictly in accordance with the manufacturer's recommendations. The repaired surface shall thereafter be treated with a high-performance elastomeric cementitious waterproof coating such as BRUSHBOND RFX or equivalent approved product, including preparation of the substrate, mixing, application in the required number of coats, curing and finishing, complete in all respects. The rate shall include all materials, labour, machinery, tools and tackles, consumables, transportation, leads and lifts and all incidental works required for satisfactory completion of the repair. The rate shall be applicable for all sizes, shapes, heights and levels and shall include necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. | Providing and carrying out crack repair in existing brick masonry walls, including thorough cleaning of the affected area with wire brushes and removal of loose material, existing paint, surface coatings and other external elements as required, cutting and forming a V-groove of minimum 15 mm depth and 5 mm width along the full length of the crack, cleaning and preparing the groove and applying approved polymer-modified crack repair filler/putty such as \\"SmartCare Crack Seal\\" of Asian Paints or equivalent, strictly in accordance with the manufacturer's recommendations. The repaired surface shall thereafter be treated with a high-performance elastomeric cementitious waterproof coating such as BRUSHBOND RFX or equivalent approved product, including preparation of the substrate, mixing, application in the required number of coats, curing and finishing, complete in all respects. The rate shall include all materials, labour, machinery, tools and tackles, consumables, transportation, leads and lifts and all incidental works required for satisfactory completion of the repair. The rate shall be applicable for all sizes, shapes, heights and levels and shall include necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. |
| 17 | Providing and applying cement plaster 18 mm thick in two coats over brick masonry/RCC surfaces, comprising first coat of 12 mm average thickness in cement mortar 1:5 (1 cement : 5 coarse sand) and second coat of 6 mm average thickness in cement mortar 1:4 (1 cement : 4 coarse sand), including preparation of the surface, hacking/raking of joints wherever required, wetting, application, levelling, finishing to a true line, level and plumb and providing sponge finish to the entire surface, including curing, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The plaster shall be executed to obtain a uniform, even and well-finished surface, and wherever additional thickness is required locally to achieve the specified line, level, plumb and finished surface, the same shall be provided without any extra cost. The rate shall include all materials, labour, transportation, tools and tackles, curing and all incidental works, and shall be applicable for all heights and levels, including the cost of providing, erecting and dismantling necessary MS scaffolding, staging and working platforms required for execution of the work, complete. | Providing and applying cement plaster 18 mm thick in two coats over brick masonry/RCC surfaces, comprising first coat of 12 mm average thickness in cement mortar 1:5 (1 cement : 5 coarse sand) and second coat of 6 mm average thickness in cement mortar 1:4 (1 cement : 4 coarse sand), including preparation of the surface, hacking/raking of joints wherever required, wetting, application, levelling, finishing to a true line, level and plumb and providing sponge finish to the entire surface, including curing, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The plaster shall be executed to obtain a uniform, even and well-finished surface, and wherever additional thickness is required locally to achieve the specified line, level, plumb and finished surface, the same shall be provided without any extra cost. The rate shall include all materials, labour, transportation, tools and tackles, curing and all incidental works, and shall be applicable for all heights and levels, including the cost of providing, erecting and dismantling necessary MS scaffolding, staging and working platforms required for execution of the work, complete. |
| 18 | Providing, fabricating and erecting structural steel work of approved quality, of all sections, sizes and dimensions, including steel beams, columns, trusses, purlins, chequered plates and other structural steel members as required, at all levels and positions, including cutting, straightening, drilling, welding, bolting, splicing, connections, fixing and erection complete in all respects, as per approved drawings, specifications and instructions of the Engineer-in-Charge. The work shall include supply and fixing of bolts, nuts, washers and other required fasteners of approved make and suitable sizes, including all necessary fabrication and erection accessories. The steel surfaces shall be thoroughly cleaned and prepared and provided with two coats of approved zinc chromate primer followed by two coats of approved synthetic enamel paint of Asian Paints Ltd. or equivalent, including surface preparation and application complete. The rate shall be inclusive of all materials, labour, transportation, loading, unloading, lifting, machinery, welding electrodes, tools and tackles, consumables, all leads and lifts, and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications and instructions of the Engineer-in-Charge. | Providing, fabricating and erecting structural steel work of approved quality, of all sections, sizes and dimensions, including steel beams, columns, trusses, purlins, chequered plates and other structural steel members as required, at all levels and positions, including cutting, straightening, drilling, welding, bolting, splicing, connections, fixing and erection complete in all respects, as per approved drawings, specifications and instructions of the Engineer-in-Charge. The work shall include supply and fixing of bolts, nuts, washers and other required fasteners of approved make and suitable sizes, including all necessary fabrication and erection accessories. The steel surfaces shall be thoroughly cleaned and prepared and provided with two coats of approved zinc chromate primer followed by two coats of approved synthetic enamel paint of Asian Paints Ltd. or equivalent, including surface preparation and application complete. The rate shall be inclusive of all materials, labour, transportation, loading, unloading, lifting, machinery, welding electrodes, tools and tackles, consumables, all leads and lifts, and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications and instructions of the Engineer-in-Charge. |
| 19 | Dismantling of existing structural steel members of all sections, sizes and dimensions, including beams, columns, trusses, purlins, chequered plates and other structural steel members, at all levels and positions, by adopting suitable methods including gas cutting, cutting, unbolting, dismantling of welded/bolted connections and lowering of dismantled members, as required, without causing damage to the adjoining structure. The work shall include necessary handling, segregation, stacking, loading, transportation and handing over of the dismantled structural steel members to Balmer Lawrie (BL) at its designated scrap yard, as directed by the Engineer-in-Charge. The rate shall include all labour, machinery, gas cutting equipment, gases, welding/cutting consumables, tools and tackles, lifting and handling equipment, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The work shall be carried out strictly in accordance with applicable safety requirements, including necessary precautions for hot work, working at height, lifting and handling of steel members. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, supports and safety arrangements required for carrying out the work at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. | Dismantling of existing structural steel members of all sections, sizes and dimensions, including beams, columns, trusses, purlins, chequered plates and other structural steel members, at all levels and positions, by adopting suitable methods including gas cutting, cutting, unbolting, dismantling of welded/bolted connections and lowering of dismantled members, as required, without causing damage to the adjoining structure. The work shall include necessary handling, segregation, stacking, loading, transportation and handing over of the dismantled structural steel members to Balmer Lawrie (BL) at its designated scrap yard, as directed by the Engineer-in-Charge. The rate shall include all labour, machinery, gas cutting equipment, gases, welding/cutting consumables, tools and tackles, lifting and handling equipment, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The work shall be carried out strictly in accordance with applicable safety requirements, including necessary precautions for hot work, working at height, lifting and handling of steel members. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, supports and safety arrangements required for carrying out the work at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. |
| 20 | Dismantling and removal of existing 600 mm diameter turbo ventilators, including dismantling of all associated supports, fixtures, fasteners and connections, as required, at all heights and levels, by adopting suitable methods and precautions so as to avoid damage to the adjoining roof/structural members. The dismantled turbo ventilators and associated reusable/scrap materials shall be carefully lowered, handled, stacked, transported and handed over to Balmer Lawrie (BL) at its designated scrap yard within the premises, as directed by the Engineer-in-Charge. The work shall be carried out in a safe and systematic manner in accordance with applicable safety requirements, including precautions for working at height, lifting, lowering and handling of dismantled components. The rate shall include all labour, machinery, lifting and handling equipment, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, supports, barricading and other safety arrangements required for carrying out the work safely at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. | Dismantling and removal of existing 600 mm diameter turbo ventilators, including dismantling of all associated supports, fixtures, fasteners and connections, as required, at all heights and levels, by adopting suitable methods and precautions so as to avoid damage to the adjoining roof/structural members. The dismantled turbo ventilators and associated reusable/scrap materials shall be carefully lowered, handled, stacked, transported and handed over to Balmer Lawrie (BL) at its designated scrap yard within the premises, as directed by the Engineer-in-Charge. The work shall be carried out in a safe and systematic manner in accordance with applicable safety requirements, including precautions for working at height, lifting, lowering and handling of dismantled components. The rate shall include all labour, machinery, lifting and handling equipment, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, supports, barricading and other safety arrangements required for carrying out the work safely at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. |
| 21 | Dismantling and removal of existing damaged GI/Asbestos roof sheets and cladding sheets of all types, sizes, shapes and at all heights and levels, including careful removal of all associated accessories, fixtures, fasteners, flashings, gutters and other fittings, as required, using suitable methods, tools and tackles and taking all necessary precautions to prevent damage to the adjoining structure and property. The dismantled sheets and associated materials shall be carefully lowered, handled, segregated and temporarily stacked at the designated location within the premises and thereafter loaded, transported and disposed of outside the premises at the designated disposal facility of the local authority or at any other location approved/designated by Balmer Lawrie, as directed by the Engineer-in-Charge and in accordance with applicable statutory requirements. The rate shall include all labour, machinery, cutting tools, tools and tackles, loading, unloading, handling, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets, barricading and other safety arrangements required for safe execution of the work at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. | Dismantling and removal of existing damaged GI/Asbestos roof sheets and cladding sheets of all types, sizes, shapes and at all heights and levels, including careful removal of all associated accessories, fixtures, fasteners, flashings, gutters and other fittings, as required, using suitable methods, tools and tackles and taking all necessary precautions to prevent damage to the adjoining structure and property. The dismantled sheets and associated materials shall be carefully lowered, handled, segregated and temporarily stacked at the designated location within the premises and thereafter loaded, transported and disposed of outside the premises at the designated disposal facility of the local authority or at any other location approved/designated by Balmer Lawrie, as directed by the Engineer-in-Charge and in accordance with applicable statutory requirements. The rate shall include all labour, machinery, cutting tools, tools and tackles, loading, unloading, handling, transportation, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets, barricading and other safety arrangements required for safe execution of the work at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. |
| 22 | Providing and fixing non-asbestos, high-impact fibre reinforced cement corrugated roofing sheets of 6 mm thickness, blue colour, conforming to IS 14871, for roofing of any pitch, including supplying and fixing with polymer-coated J or L hooks, 8 mm diameter GI bolts and nuts with plain and bitumen washers, or approved self-drilling fasteners with EPDM washers, including cutting, trimming and fixing to required sizes and shapes wherever necessary, complete as per drawings, specifications and instructions of the Engineer-in-Charge. The item shall be measured excluding the cost of purlins, rafters and trusses. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting equipment, fasteners, washers and all incidental works required for proper fixing and completion of the roofing. The rate shall also include providing and fixing temporary tarpaulin sheets of suitable thickness over the affected area, wherever required, to protect the building/interior and maintain weatherproofing until the new roofing sheets are fully installed. The rate shall further include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets and other safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing non-asbestos, high-impact fibre reinforced cement corrugated roofing sheets of 6 mm thickness, blue colour, conforming to IS 14871, for roofing of any pitch, including supplying and fixing with polymer-coated J or L hooks, 8 mm diameter GI bolts and nuts with plain and bitumen washers, or approved self-drilling fasteners with EPDM washers, including cutting, trimming and fixing to required sizes and shapes wherever necessary, complete as per drawings, specifications and instructions of the Engineer-in-Charge. The item shall be measured excluding the cost of purlins, rafters and trusses. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting equipment, fasteners, washers and all incidental works required for proper fixing and completion of the roofing. The rate shall also include providing and fixing temporary tarpaulin sheets of suitable thickness over the affected area, wherever required, to protect the building/interior and maintain weatherproofing until the new roofing sheets are fully installed. The rate shall further include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets and other safety arrangements required for carrying out the work at all heights and levels, complete. |
| 23 | Providing and fixing 600 mm diameter turbo ventilator of approved make, conforming to the manufacturer's specifications and recommendations, including supply, transportation, handling, assembling and fixing of the turbo ventilator at the required location, complete with all necessary supporting frame, brackets, clamps, fasteners, nuts, bolts, sealants and other accessories required for proper fixing and weather-tight installation, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, tools and tackles, machinery, lifting and handling arrangements and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing 600 mm diameter turbo ventilator of approved make, conforming to the manufacturer's specifications and recommendations, including supply, transportation, handling, assembling and fixing of the turbo ventilator at the required location, complete with all necessary supporting frame, brackets, clamps, fasteners, nuts, bolts, sealants and other accessories required for proper fixing and weather-tight installation, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, tools and tackles, machinery, lifting and handling arrangements and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 24 | Providing and fixing solid polycarbonate roofing sheets of 2 mm thickness, having suitable embossments/profile on the underside to match the existing/proposed roofing profile, with UV-protective coating/film on the exposed top surface and capable of providing approximately 80% light transmission, at all heights and levels, including cutting, trimming and fixing to required sizes and shapes wherever necessary. The sheets shall be fixed strictly in accordance with the manufacturer's recommendations using approved compatible fasteners, profiles, washers, sealants, flashing and all other necessary accessories, including provision of required side and end laps and proper sealing of joints to ensure a durable, watertight and leak-proof installation during rains, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting equipment, fasteners, washers, sealants and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets and other safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing solid polycarbonate roofing sheets of 2 mm thickness, having suitable embossments/profile on the underside to match the existing/proposed roofing profile, with UV-protective coating/film on the exposed top surface and capable of providing approximately 80% light transmission, at all heights and levels, including cutting, trimming and fixing to required sizes and shapes wherever necessary. The sheets shall be fixed strictly in accordance with the manufacturer's recommendations using approved compatible fasteners, profiles, washers, sealants, flashing and all other necessary accessories, including provision of required side and end laps and proper sealing of joints to ensure a durable, watertight and leak-proof installation during rains, complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting equipment, fasteners, washers, sealants and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets and other safety arrangements required for carrying out the work at all heights and levels, complete. |
| 25 | Providing and applying anti-corrosive high-build epoxy coating system, or approved equivalent, to existing structural steel members and surfaces including structural angles, pipes, tanks, ladders and other structural elements, at all heights and levels, as per drawings, specifications and instructions of the Engineer-in-Charge. The work shall include thorough preparation and cleaning of the existing surface by removing rust, mill scale, dust, dirt, grease, loose paint and other contaminants by suitable mechanical/approved methods. On rusted areas, one coat of approved rust-converter/passivating chemical shall be applied to arrest and passivate residual rust, strictly as per the manufacturer's recommendations. Thereafter, one coat of approved protective coating such as Berger Protectomastic or equivalent, suitable for providing galvanic/corrosion protection, shall be applied in accordance with the manufacturer's specifications. Over the same, two coats of approved high-build anti-corrosive epoxy coating, such as Epilux 155 HB, Epilux 89 HB, Epilux 4 or equivalent, of approved colour and shade shall be applied to achieve the specified dry film thickness and uniform finish. The rate shall include all materials, surface preparation, rust converter, protective coating, epoxy coating, labour, machinery, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for complete and satisfactory execution. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and applying anti-corrosive high-build epoxy coating system, or approved equivalent, to existing structural steel members and surfaces including structural angles, pipes, tanks, ladders and other structural elements, at all heights and levels, as per drawings, specifications and instructions of the Engineer-in-Charge. The work shall include thorough preparation and cleaning of the existing surface by removing rust, mill scale, dust, dirt, grease, loose paint and other contaminants by suitable mechanical/approved methods. On rusted areas, one coat of approved rust-converter/passivating chemical shall be applied to arrest and passivate residual rust, strictly as per the manufacturer's recommendations. Thereafter, one coat of approved protective coating such as Berger Protectomastic or equivalent, suitable for providing galvanic/corrosion protection, shall be applied in accordance with the manufacturer's specifications. Over the same, two coats of approved high-build anti-corrosive epoxy coating, such as Epilux 155 HB, Epilux 89 HB, Epilux 4 or equivalent, of approved colour and shade shall be applied to achieve the specified dry film thickness and uniform finish. The rate shall include all materials, surface preparation, rust converter, protective coating, epoxy coating, labour, machinery, tools and tackles, consumables, transportation, all leads and lifts and all incidental works required for complete and satisfactory execution. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 26 | Providing and fixing gutters made of 2 mm thick galvanised iron (GI) sheet, having zinc coating not less than 275 g/m², of required size, shape and profile, including cutting, bending, forming, jointing and fixing complete with all necessary fittings, joints, brackets, supports, fasteners, sealants and accessories, as required for proper and watertight installation. The gutter shall be securely supported with 50 × 6 mm MS flat clamps at maximum 600 mm centre to centre spacing, including necessary bends, outlets, end closures and cut-outs for connection to down-take pipes, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, transportation, handling, tools and tackles, welding/fixing consumables, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing gutters made of 2 mm thick galvanised iron (GI) sheet, having zinc coating not less than 275 g/m², of required size, shape and profile, including cutting, bending, forming, jointing and fixing complete with all necessary fittings, joints, brackets, supports, fasteners, sealants and accessories, as required for proper and watertight installation. The gutter shall be securely supported with 50 × 6 mm MS flat clamps at maximum 600 mm centre to centre spacing, including necessary bends, outlets, end closures and cut-outs for connection to down-take pipes, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall include all materials, labour, transportation, handling, tools and tackles, welding/fixing consumables, all leads and lifts and all incidental works required for satisfactory completion of the work. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 27 | Dismantling and removal of existing rainwater down-take pipes of any diameter, material, size and configuration, including removal of all associated clamps, brackets, supports, joints, fittings and connections, as required, at all heights and levels, by adopting suitable methods and precautions so as to avoid damage to the adjoining structure and finishes. The dismantled pipes and associated materials shall be carefully lowered, handled, segregated, stacked and loaded, and thereafter transported and disposed of outside the premises at a disposal facility/location permitted by the local authority and in accordance with applicable statutory requirements, as directed by the Engineer-in-Charge. The rate shall include all labour, machinery, cutting tools, tools and tackles, lifting and handling arrangements, loading, unloading, transportation, all leads and lifts and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets, barricading and other safety arrangements required for carrying out the work safely at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. | Dismantling and removal of existing rainwater down-take pipes of any diameter, material, size and configuration, including removal of all associated clamps, brackets, supports, joints, fittings and connections, as required, at all heights and levels, by adopting suitable methods and precautions so as to avoid damage to the adjoining structure and finishes. The dismantled pipes and associated materials shall be carefully lowered, handled, segregated, stacked and loaded, and thereafter transported and disposed of outside the premises at a disposal facility/location permitted by the local authority and in accordance with applicable statutory requirements, as directed by the Engineer-in-Charge. The rate shall include all labour, machinery, cutting tools, tools and tackles, lifting and handling arrangements, loading, unloading, transportation, all leads and lifts and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms, safety nets, barricading and other safety arrangements required for carrying out the work safely at all heights and levels, complete as per specifications and instructions of the Engineer-in-Charge. |
| 28 | Providing and fixing rainwater down-take pipes of 150 mm diameter, of approved make and material, including all necessary bends, shoes, offsets, sockets, couplings, clamps, brackets, supports, joints, sealants and other required fittings and accessories, complete in all respects as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The pipes shall be securely fixed to the supporting structure with 50 × 6 mm GI/MS flats or approved equivalent clamps at maximum 600 mm centre to centre spacing, including all necessary connections to gutters, outlets and drainage arrangements, complete. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting and jointing, all leads and lifts and all incidental works required for proper, rigid and leak-proof installation. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing rainwater down-take pipes of 150 mm diameter, of approved make and material, including all necessary bends, shoes, offsets, sockets, couplings, clamps, brackets, supports, joints, sealants and other required fittings and accessories, complete in all respects as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The pipes shall be securely fixed to the supporting structure with 50 × 6 mm GI/MS flats or approved equivalent clamps at maximum 600 mm centre to centre spacing, including all necessary connections to gutters, outlets and drainage arrangements, complete. The rate shall include all materials, labour, transportation, handling, tools and tackles, cutting and jointing, all leads and lifts and all incidental works required for proper, rigid and leak-proof installation. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 29 | Providing and applying polyurethane (PU) waterproof coating system of minimum 500 micron dry film thickness to existing gutters, including thorough cleaning and preparation of the gutter surface by removing debris, dirt, dust, loose material, rust and other contaminants, complete. The work shall include opening, cleaning and sealing of all joints, corners, junctions, downspout connections and other vulnerable locations using approved MS polymer sealant and compatible waterproofing tape, followed by application of approved primer and two coats of polyurethane waterproof coating, strictly in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge. The coating shall be applied uniformly to achieve a continuous, durable and watertight finish, including treatment of all laps, joints, outlets and penetrations to prevent leakage during rains. The rate shall include all materials, primer, PU coating, MS polymer sealant, waterproofing tape, labour, surface preparation, tools and tackles, machinery, consumables, transportation, all leads and lifts and all incidental works required for complete and satisfactory execution. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. | Providing and applying polyurethane (PU) waterproof coating system of minimum 500 micron dry film thickness to existing gutters, including thorough cleaning and preparation of the gutter surface by removing debris, dirt, dust, loose material, rust and other contaminants, complete. The work shall include opening, cleaning and sealing of all joints, corners, junctions, downspout connections and other vulnerable locations using approved MS polymer sealant and compatible waterproofing tape, followed by application of approved primer and two coats of polyurethane waterproof coating, strictly in accordance with the manufacturer's recommendations and as approved by the Engineer-in-Charge. The coating shall be applied uniformly to achieve a continuous, durable and watertight finish, including treatment of all laps, joints, outlets and penetrations to prevent leakage during rains. The rate shall include all materials, primer, PU coating, MS polymer sealant, waterproofing tape, labour, surface preparation, tools and tackles, machinery, consumables, transportation, all leads and lifts and all incidental works required for complete and satisfactory execution. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. |
| 30 | Carefully dismantling and removing existing cement jali of all sizes and patterns, at all heights and levels, including removal of all fixing materials, supports and accessories as required, taking necessary precautions to avoid damage to the adjoining masonry, RCC and finishes complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include labour, transportation, handling, tools and tackles, removal of debris and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Carefully dismantling and removing existing cement jali of all sizes and patterns, at all heights and levels, including removal of all fixing materials, supports and accessories as required, taking necessary precautions to avoid damage to the adjoining masonry, RCC and finishes complete in all respects as per drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include labour, transportation, handling, tools and tackles, removal of debris and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 31 | Providing and fixing precast reinforced cement concrete (RCC jali of approved design, pattern and size, manufactured using cement, coarse/fine aggregate and reinforcement as specified, with minimum M-20 grade concrete, properly compacted and cured, including providing necessary reinforcement bars/wire mesh, moulds and formwork, lifting, handling and transportation.The RCC jali shall be fixed in position in masonry/openings or as shown in the approved drawings, using cement mortar 1:3 (1 cement : 3 coarse sand) or approved fixing material, including making good the joints and adjoining surfaces, providing necessary supports, clamps, dowels or holdfasts wherever required, and ensuring proper line, level, plumb and alignment.The exposed surfaces shall be finished smooth and free from cracks, honeycombing and other defects, including cutting/fitting at corners and junctions wherever required. The work shall include all materials, reinforcement, moulds, mortar, supports, scaffolding, labour, transportation, loading/unloading, tools and tackles and all incidental works necessary for complete installation. | Providing and fixing precast reinforced cement concrete (RCC jali of approved design, pattern and size, manufactured using cement, coarse/fine aggregate and reinforcement as specified, with minimum M-20 grade concrete, properly compacted and cured, including providing necessary reinforcement bars/wire mesh, moulds and formwork, lifting, handling and transportation.The RCC jali shall be fixed in position in masonry/openings or as shown in the approved drawings, using cement mortar 1:3 (1 cement : 3 coarse sand) or approved fixing material, including making good the joints and adjoining surfaces, providing necessary supports, clamps, dowels or holdfasts wherever required, and ensuring proper line, level, plumb and alignment.The exposed surfaces shall be finished smooth and free from cracks, honeycombing and other defects, including cutting/fitting at corners and junctions wherever required. The work shall include all materials, reinforcement, moulds, mortar, supports, scaffolding, labour, transportation, loading/unloading, tools and tackles and all incidental works necessary for complete installation. |
| 32 | Providing and fixing nylon pigeon/bird protection net (Kabutar Jali) of approved make and quality, having approximately 40 mm × 40 mm mesh size, at all required locations, heights and levels, including cutting, trimming and fixing to required sizes and shapes, with suitable UV-stabilised nylon netting and all necessary approved fixing accessories such as hooks, clamps, fasteners, anchors, brackets, supporting wires/ropes and other fittings, as required to ensure a taut, secure and durable installation. The work shall include all materials, labour, transportation, handling, tools and tackles and incidental works required for satisfactory completion, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing nylon pigeon/bird protection net (Kabutar Jali) of approved make and quality, having approximately 40 mm × 40 mm mesh size, at all required locations, heights and levels, including cutting, trimming and fixing to required sizes and shapes, with suitable UV-stabilised nylon netting and all necessary approved fixing accessories such as hooks, clamps, fasteners, anchors, brackets, supporting wires/ropes and other fittings, as required to ensure a taut, secure and durable installation. The work shall include all materials, labour, transportation, handling, tools and tackles and incidental works required for satisfactory completion, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 33 | Terrace waterproofing: Carefully dismantling and removing the existing waterproofing treatment including existing tiles, mortar beds and other associated layers, wherever required, and disposing of the debris as directed by the Engineer-in-Charge. Thereafter, providing and laying integral cement-based waterproofing treatment to roofs, terraces and balconies, including preparation and cleaning of the RCC surface and treatment of adjoining walls up to 300 mm height, comprising the following operations: (a) applying and grouting a slurry coat of neat cement using 2.75 kg of cement per sq.m, admixed with approved proprietary waterproofing compound conforming to IS 2645, over the prepared RCC slab; (b) laying a 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand), admixed with approved waterproofing compound, to the required slope, followed by laying cement concrete using brick bats/broken bricks of 25 mm to 100 mm size, with 50% cement mortar 1:5 admixed with approved waterproofing compound, including proper compaction and treatment of junctions and rounding of corners; (c) after adequate curing, applying a second coat of cement slurry admixed with approved waterproofing compound conforming to IS 2645; (d) providing a 20 mm thick jointless finishing layer of cement mortar 1:4 (1 cement : 4 coarse sand), admixed with approved waterproofing compound, finished with neat cement slurry and trowelled smooth, including formation of 300 mm × 300 mm panels/squares as directed; and (e) flooding the completed terrace with water for a minimum period of two weeks for curing and final leak testing, including rectification of any leakage/defects observed during testing, complete. The rate shall include all materials, labour, transportation, tools and tackles, curing, disposal of dismantled materials/debris and all incidental works required for complete execution. The rate shall also include all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. | Terrace waterproofing: Carefully dismantling and removing the existing waterproofing treatment including existing tiles, mortar beds and other associated layers, wherever required, and disposing of the debris as directed by the Engineer-in-Charge. Thereafter, providing and laying integral cement-based waterproofing treatment to roofs, terraces and balconies, including preparation and cleaning of the RCC surface and treatment of adjoining walls up to 300 mm height, comprising the following operations: (a) applying and grouting a slurry coat of neat cement using 2.75 kg of cement per sq.m, admixed with approved proprietary waterproofing compound conforming to IS 2645, over the prepared RCC slab; (b) laying a 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand), admixed with approved waterproofing compound, to the required slope, followed by laying cement concrete using brick bats/broken bricks of 25 mm to 100 mm size, with 50% cement mortar 1:5 admixed with approved waterproofing compound, including proper compaction and treatment of junctions and rounding of corners; (c) after adequate curing, applying a second coat of cement slurry admixed with approved waterproofing compound conforming to IS 2645; (d) providing a 20 mm thick jointless finishing layer of cement mortar 1:4 (1 cement : 4 coarse sand), admixed with approved waterproofing compound, finished with neat cement slurry and trowelled smooth, including formation of 300 mm × 300 mm panels/squares as directed; and (e) flooding the completed terrace with water for a minimum period of two weeks for curing and final leak testing, including rectification of any leakage/defects observed during testing, complete. The rate shall include all materials, labour, transportation, tools and tackles, curing, disposal of dismantled materials/debris and all incidental works required for complete execution. The rate shall also include all necessary scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete as per drawings, specifications, manufacturer's recommendations and instructions of the Engineer-in-Charge. |
| 34 | Providing and applying two coats of approved quality plastic emulsion paint of approved make, shade and colour over a coat of suitable primer of approved make on prepared wall surfaces, including thorough cleaning and preparation of the surface, removal of loose paint, dust, dirt and other foreign matter, filling and making good minor surface imperfections wherever required, sanding, application of one coat of approved primer and two coats of plastic emulsion paint to achieve a smooth, uniform and even finish, complete in all respects as per the manufacturer's recommendations, drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, primer, paint, labour, surface preparation, tools and tackles, brushes/rollers, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and applying two coats of approved quality plastic emulsion paint of approved make, shade and colour over a coat of suitable primer of approved make on prepared wall surfaces, including thorough cleaning and preparation of the surface, removal of loose paint, dust, dirt and other foreign matter, filling and making good minor surface imperfections wherever required, sanding, application of one coat of approved primer and two coats of plastic emulsion paint to achieve a smooth, uniform and even finish, complete in all respects as per the manufacturer's recommendations, drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, primer, paint, labour, surface preparation, tools and tackles, brushes/rollers, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 35 | External Wall Painting: Providing and applying two coats of approved quality exterior-grade weather-resistant acrylic emulsion paint, such as “APEX ULTIMA PROTEK” of Asian Paints or approved equivalent, of approved shade and colour, over prepared external plastered surfaces, including thorough cleaning and preparation of the surface by wire/hard brushing and removal of dust, dirt, loose particles, existing flaking paint, fungus, algae and other surface contaminants, followed by application of suitable exterior-grade primer wherever required/recommended by the manufacturer. The paint shall be applied uniformly in two coats to achieve a smooth, even and durable finish, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, primer, paint, labour, surface preparation, tools and tackles, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete | External Wall Painting: Providing and applying two coats of approved quality exterior-grade weather-resistant acrylic emulsion paint, such as “APEX ULTIMA PROTEK” of Asian Paints or approved equivalent, of approved shade and colour, over prepared external plastered surfaces, including thorough cleaning and preparation of the surface by wire/hard brushing and removal of dust, dirt, loose particles, existing flaking paint, fungus, algae and other surface contaminants, followed by application of suitable exterior-grade primer wherever required/recommended by the manufacturer. The paint shall be applied uniformly in two coats to achieve a smooth, even and durable finish, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The rate shall include all materials, primer, paint, labour, surface preparation, tools and tackles, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete |
| 36 | Enamel Painting: Providing and applying one coat of approved quality wall primer suitable for existing/new steel surfaces, after thorough cleaning and preparation of the surfaces, including removal of oil, grease, dirt, dust, rust, loose paint and other contaminants, particularly in areas affected by oil spillage, up to a height of 1.50 m, followed by application of two coats of superior quality synthetic enamel paint of approved make, such as ICI or equivalent, in approved shade and colour, over all existing and new steel surfaces, including structural steel members, as required, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The work shall include necessary surface preparation, cleaning, sanding/wire brushing, primer application and enamel painting to achieve a smooth, uniform and durable finish. The rate shall include all materials, primer, enamel paint, labour, tools and tackles, brushes/rollers, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Enamel Painting: Providing and applying one coat of approved quality wall primer suitable for existing/new steel surfaces, after thorough cleaning and preparation of the surfaces, including removal of oil, grease, dirt, dust, rust, loose paint and other contaminants, particularly in areas affected by oil spillage, up to a height of 1.50 m, followed by application of two coats of superior quality synthetic enamel paint of approved make, such as ICI or equivalent, in approved shade and colour, over all existing and new steel surfaces, including structural steel members, as required, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The work shall include necessary surface preparation, cleaning, sanding/wire brushing, primer application and enamel painting to achieve a smooth, uniform and durable finish. The rate shall include all materials, primer, enamel paint, labour, tools and tackles, brushes/rollers, consumables, transportation and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 37 | Same as above but providing two coats of enamel paint over a steel primer coat on handrails. | Same as above but providing two coats of enamel paint over a steel primer coat on handrails. |
| 38 | Same as above but for letter printing by making first background in colour as per the instruction of BL official and then writing letters on that at various locations on the wall/ Steel as directed by BL Official. The measurement of border area will be considered for payment. | Same as above but for letter printing by making first background in colour as per the instruction of BL official and then writing letters on that at various locations on the wall/ Steel as directed by BL Official. The measurement of border area will be considered for payment. |
| 39 | Enamel Painting to Staircase Railings: Providing and applying one coat of approved quality metal/steel primer over existing and new steel staircase railings, after thorough cleaning and preparation of the surfaces, including removal of oil/grease spillage, dust, dirt, rust, loose paint and other surface contaminants, particularly up to a height of 1.50 m, followed by application of two coats of superior quality synthetic enamel paint of approved make, such as ICI or equivalent, in approved shade and colour, to achieve a smooth, uniform and durable finish, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The item shall include all surface preparation, scraping, wire brushing/sanding, cleaning, primer and enamel coats, including labour, materials, tools and tackles, brushes/rollers, consumables and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the painting work to all staircase railings at all heights and levels, complete. | Enamel Painting to Staircase Railings: Providing and applying one coat of approved quality metal/steel primer over existing and new steel staircase railings, after thorough cleaning and preparation of the surfaces, including removal of oil/grease spillage, dust, dirt, rust, loose paint and other surface contaminants, particularly up to a height of 1.50 m, followed by application of two coats of superior quality synthetic enamel paint of approved make, such as ICI or equivalent, in approved shade and colour, to achieve a smooth, uniform and durable finish, complete in all respects as per the manufacturer's recommendations, specifications and instructions of the Engineer-in-Charge. The item shall include all surface preparation, scraping, wire brushing/sanding, cleaning, primer and enamel coats, including labour, materials, tools and tackles, brushes/rollers, consumables and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the painting work to all staircase railings at all heights and levels, complete. |
| 40 | Carefully removing, dismantling and taking down existing electrical cables/wires/conduits/light fittings of all sizes, types and configurations, wherever required for execution of repair works, including removal of existing clamps, saddles, supports, ties and other associated accessories, with due care to avoid damage to the cables/wires/light fittings and adjoining structure. The removed cables shall be properly identified, coiled, protected and safely stored at a location as directed by the Engineer-in-Charge and, after completion of the repair works, shall be re-fixed/reinstalled at their original or approved locations, including providing all necessary additional accessories, clamps, saddles, supports, connectors, termination materials and other required fittings, wherever necessary. The work shall include proper routing, alignment, securing, reconnection and testing of the cables after reinstatement, complete in all respects as per applicable electrical safety requirements, drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all labour, materials, equipment, tools and tackles, consumables, transportation, handling and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Carefully removing, dismantling and taking down existing electrical cables/wires/conduits/light fittings of all sizes, types and configurations, wherever required for execution of repair works, including removal of existing clamps, saddles, supports, ties and other associated accessories, with due care to avoid damage to the cables/wires/light fittings and adjoining structure. The removed cables shall be properly identified, coiled, protected and safely stored at a location as directed by the Engineer-in-Charge and, after completion of the repair works, shall be re-fixed/reinstalled at their original or approved locations, including providing all necessary additional accessories, clamps, saddles, supports, connectors, termination materials and other required fittings, wherever necessary. The work shall include proper routing, alignment, securing, reconnection and testing of the cables after reinstatement, complete in all respects as per applicable electrical safety requirements, drawings, specifications and instructions of the Engineer-in-Charge. The rate shall include all labour, materials, equipment, tools and tackles, consumables, transportation, handling and all incidental works required for satisfactory completion. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 41 | Providing and fixing Aluminium Composite Panel (ACP) boxing/cladding of exterior grade, 4 mm overall thickness, comprising aluminium skins of 0.5 mm thickness each with 3 mm LDPE/mineral or approved core, with PVDF coating, using approved make such as Eurobond, AluBond, Alukbond or equivalent, including all necessary fabrication, cutting, bending, grooving, routing and fixing to the required shape and profile. The work shall include providing and fixing suitable aluminium sections/sub-frame, brackets, cleats, fasteners, rivets, screws and other hardware, including application of approved high-performance weather-resistant silicone sealant such as Dow Corning 789 or equivalent, masking tape and necessary joint treatment to achieve a neat, uniform and weather-tight finish. The ACP surfaces shall be provided with approved-quality digitally printed graphics/logo duly matt laminated, as required, with the size and design of the logo/graphics as provided/approved by Balmer Lawrie (BL). The rate shall include all materials, fabrication, labour, transportation, handling, cutting, fixing, sealants, hardware, consumables, tools and tackles, lifting arrangements and all incidental works required for satisfactory completion of the finished item, complete as per approved drawings, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. | Providing and fixing Aluminium Composite Panel (ACP) boxing/cladding of exterior grade, 4 mm overall thickness, comprising aluminium skins of 0.5 mm thickness each with 3 mm LDPE/mineral or approved core, with PVDF coating, using approved make such as Eurobond, AluBond, Alukbond or equivalent, including all necessary fabrication, cutting, bending, grooving, routing and fixing to the required shape and profile. The work shall include providing and fixing suitable aluminium sections/sub-frame, brackets, cleats, fasteners, rivets, screws and other hardware, including application of approved high-performance weather-resistant silicone sealant such as Dow Corning 789 or equivalent, masking tape and necessary joint treatment to achieve a neat, uniform and weather-tight finish. The ACP surfaces shall be provided with approved-quality digitally printed graphics/logo duly matt laminated, as required, with the size and design of the logo/graphics as provided/approved by Balmer Lawrie (BL). The rate shall include all materials, fabrication, labour, transportation, handling, cutting, fixing, sealants, hardware, consumables, tools and tackles, lifting arrangements and all incidental works required for satisfactory completion of the finished item, complete as per approved drawings, manufacturer's recommendations and instructions of the Engineer-in-Charge. The rate shall also include providing, erecting and dismantling necessary MS scaffolding, staging, working platforms and safety arrangements required for carrying out the work at all heights and levels, complete. |
| 42 | Dismantling existing aluminium glazed windows including aluminium frames, shutters, glass, fittings, fixtures and fasteners, carefully removing the same without damaging the adjoining masonry/plaster, stacking serviceable materials as directed by the Engineer-in-Charge and removing/disposal of unserviceable materials and debris as directed, including making good the damaged portions of masonry/plaster. | Dismantling existing aluminium glazed windows including aluminium frames, shutters, glass, fittings, fixtures and fasteners, carefully removing the same without damaging the adjoining masonry/plaster, stacking serviceable materials as directed by the Engineer-in-Charge and removing/disposal of unserviceable materials and debris as directed, including making good the damaged portions of masonry/plaster. |
| 43 | Providing and fixing factory-made uPVC white/approved colour glazed sliding/casement windows comprising multi-chambered uPVC extruded profiles of approved make and suitable series, duly reinforced with 1.60 ± 0.20 mm thick galvanized mild steel sections of required length and suitable profile, with uPVC glazing beads, EPDM gaskets, GI fasteners, plastic packers/caps and SS screws. Frames and shutters shall be mitre-cut and fusion-welded at corners, including mullions/intermediate sections wherever required, drilling of holes for fixing hardware and drainage of water, complete as per approved drawings and direction of Engineer-in-Charge. The window shall be complete with 5 mm thick clear/toughened glass, as specified, including approved quality SS-304 hardware/fittings such as handles, locks, rollers, friction stays/hinges, restrictors and other necessary accessories, including fixing the frame to the existing opening with suitable anchor fasteners, filling the gap between frame and adjoining wall with approved weatherproof silicone sealant over backer rod, making good the surrounding masonry/plaster and finishing complete. The item shall include all materials, labour, dismantling, loading, unloading, transportation, scaffolding, tools and tackles, disposal of debris, making good, sealants, hardware, fixing accessories and all incidental works necessary for completion. | Providing and fixing factory-made uPVC white/approved colour glazed sliding/casement windows comprising multi-chambered uPVC extruded profiles of approved make and suitable series, duly reinforced with 1.60 ± 0.20 mm thick galvanized mild steel sections of required length and suitable profile, with uPVC glazing beads, EPDM gaskets, GI fasteners, plastic packers/caps and SS screws. Frames and shutters shall be mitre-cut and fusion-welded at corners, including mullions/intermediate sections wherever required, drilling of holes for fixing hardware and drainage of water, complete as per approved drawings and direction of Engineer-in-Charge. The window shall be complete with 5 mm thick clear/toughened glass, as specified, including approved quality SS-304 hardware/fittings such as handles, locks, rollers, friction stays/hinges, restrictors and other necessary accessories, including fixing the frame to the existing opening with suitable anchor fasteners, filling the gap between frame and adjoining wall with approved weatherproof silicone sealant over backer rod, making good the surrounding masonry/plaster and finishing complete. The item shall include all materials, labour, dismantling, loading, unloading, transportation, scaffolding, tools and tackles, disposal of debris, making good, sealants, hardware, fixing accessories and all incidental works necessary for completion. |
| 44 | Dismantling and removing existing false ceiling of any type including gypsum board, mineral fibre, aluminium, grid suspension system, hangers, channels, framework, fixtures and fittings, carefully dismantling without damaging the existing structure, services and adjoining finishes, stacking serviceable materials as directed by the Engineer-in-Charge and disposal of unserviceable material/debris outside the premises as directed, including all necessary scaffolding, tools and tackles. | Dismantling and removing existing false ceiling of any type including gypsum board, mineral fibre, aluminium, grid suspension system, hangers, channels, framework, fixtures and fittings, carefully dismantling without damaging the existing structure, services and adjoining finishes, stacking serviceable materials as directed by the Engineer-in-Charge and disposal of unserviceable material/debris outside the premises as directed, including all necessary scaffolding, tools and tackles. |
| 45 | Providing and fixing PVC false ceiling comprising factory-made PVC panels of approved make, colour, texture and design, minimum 6 mm thick, of suitable width, fixed on a concealed/exposed GI framing system comprising GI perimeter channels, intermediate channels, suspenders, hangers, clips, GI screws and other required accessories, properly levelled and aligned, including cutting and fixing around columns, beams, walls, electrical fixtures, light fittings, AC diffusers, access panels and other services. The PVC panels shall be properly jointed and fixed to provide a neat, uniform and level ceiling surface, including all necessary GI framework, suspension arrangements, fasteners, edge trims, mouldings, corner profiles, finishing accessories and making good around all openings. The item shall also include providing necessary access panels wherever required for maintenance of concealed services. | Providing and fixing PVC false ceiling comprising factory-made PVC panels of approved make, colour, texture and design, minimum 6 mm thick, of suitable width, fixed on a concealed/exposed GI framing system comprising GI perimeter channels, intermediate channels, suspenders, hangers, clips, GI screws and other required accessories, properly levelled and aligned, including cutting and fixing around columns, beams, walls, electrical fixtures, light fittings, AC diffusers, access panels and other services. The PVC panels shall be properly jointed and fixed to provide a neat, uniform and level ceiling surface, including all necessary GI framework, suspension arrangements, fasteners, edge trims, mouldings, corner profiles, finishing accessories and making good around all openings. The item shall also include providing necessary access panels wherever required for maintenance of concealed services. |
| 46 | Supply, Installation and commissioning of approved make floor mounted EWC (European Water Closet) 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series or approved equivalent, Chrome Finish with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series. | Supply, Installation and commissioning of approved make floor mounted EWC (European Water Closet) 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series or approved equivalent, Chrome Finish with 7 years warranty / Jupiter Aqua Lines-JALor equivalent series. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender