Tender For Repair/ Upgradation And Other Allied Works Of House No. 1369 (Type Vi) Sector-19, Chandigarh.(Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
6.24 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
12496
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Upgradation And Other Allied Works Of House No. 1369 (Type Vi) Sector-19, Chandigarh.(Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. But not exceeding 300mm dia DSR 2.10.1.2 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plith level. DSR 4.1.3 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with F.P.S.bricks of class esignation 75 in superstructure above plinth level up to floor V level in all shapes and size in:as per DSR 6.4 |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR 6.4.2 |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement of mix :DSR 13.7 |
| 9 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 10 | Providing & Fixing of SS AISI 304 ( 18/8) Kitchen Sink as per IS 13983 with CI Brackets and SS Plug 40 mm including painting of fittings and brackets, cutting and making good the walls where ever required : DSR 17.10 |
| 11 | Kitchen sink without drain board DSR 17.10.2 |
| 12 | 610 x 460 mm bowl depth 200 mm: DSR 17.10.2.2 |
| 13 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 14 | 100 mm dia DSR 17.35.1.2 |
| 15 | 75 mm dia DSR 17.35.2.2 |
| 16 | Providing and fixing HR bend of required degree : DSR 17.40 |
| 17 | 100 mm dia DSR 17.40.1.2 |
| 18 | Providing and fixing collar : DSR 17.57 |
| 19 | 100 mm dia DSR 17.57.1.2 |
| 20 | 75 mm dia DSR 17.57.2.2 |
| 21 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good : DSR No. 17.60 |
| 22 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 23 | Sand Cast Iron S&S as per IS- 1729. DSR 17.60.2.1 |
| 24 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81 |
| 25 | Providing for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10 |
| 26 | 15 mm dia. nominal bore as per DSR 18.10.1 |
| 27 | 20 mm dia. nominal bore as per DSR 18.10.2 |
| 28 | Supplying and fixing of Gun metal Peat Valve DSR: 18.17A |
| 29 | 20 mm dia. nominal bore: DSR 18.17.1A |
| 30 | 15 mm dia. nominal bore: NSR(For Meter) |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 32 | 15 mm nominal bore DSR 18.46.2 |
| 33 | 20 mm nominal bore DSR 18.46.2 |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank : DSR 18.48 |
| 35 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 36 | 20 mm nominal bore, DSR 18.62.2 |
| 37 | Cutting holes up to 30x30 cm in walls including making good the same: DSR No. 18.76 |
| 38 | With F.P.S. bricks DSR 18.76.1 |
| 39 | Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 40 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR 18.78 |
| 41 | Providing and fixing of GI Tank Nipple of size 20 mm dia of approved make. |
| 42 | Providing& Fixing of Drip Seal joints to sand cast iron/centrifugally cast (spun) iroof |
| 43 | 100mm |
| 44 | 75 mm |
| 45 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. |
| 46 | Providing and fixing of Single 3-inlet Divertor Exposed Part kit & conceled Body Consisting of operating lever wall flange & Butten Assembly ,Make Jaquar Range Opal Model 15193K & Conceled part ALD-193 or equivalent makes in the same range of AOR to the satisfaction of EIC |
| 47 | Supplying and fixing of monoblock pump set 1 H.P. make Crompton with required platform and electricla wire complete in all resects or equivalent make in the same range of AOR |
| 48 | Providing and fixing Hydro Pneumatic Pump of size 0.5 HP Single Pump complete with Connecting Cable, NRV , having discharge 2000 LPH at 6 mtr head make Crompton Model MiniForce II or equivalent make in the same range of AOR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender