Tender For Day To Day B/R Maintenance At Dgnp Office Complex, Equipment Area, Central Store, Dg House And Certain Other Areas Under Dgnp(V)
Tender Value
8 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
20 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day B/R Maintenance At Dgnp Office Complex, Equipment Area, Central Store, Dg House And Certain Other Areas Under Dgnp(V)
BOQ
| Sl. No. | Item Description |
| 1 | Note for Serial Item No. 2.00 to 87.00: The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account.:- (i) The bidder shall note that Contractor or his authorised representative will attend the Complaint Cell at Old Complex of DGNP(V) daily at 0900 hrs, receive the complaints and arrange the skilled/semi-skilled worker i.e. Carpenter, mason, welder, Safaiwala and plumber alongwith one unskilled helper with requsite tools & plants as per the complaints. (ii) The repairs shall be done by the skilled workman in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progess of work shall not be hampered due to non availability of labour at any time. The required item which need to be replaced as per complaints/repair be supplied under respective items. The bidder shall note that the qty entered under Qty column against the item is for guidance only, the qty may be varried as per scope of complaints / site requirements. |
| 2 | Note for Serial Item No. 2.00 to 87.00 (Contd....) (iii) The contractor or his authorised supervisor on getting information through Site order/Works diary regarding the nature of repair to be carried out, he shall imidiately respond to the same and make all out efforts to carry out the same on priority within 72 hours. In case of any delay in responding/attending the repairs within 72 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 150/- per day per each work ordered upto 05(five) days and Rs. 250/- per day thereafter till completion of the work in case of delay without valid reasons as decided by the GE. (iv) Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of the contractor to make suitable arrangements for attending the repairs simultaneously at all places. (v) In case the contractor or his authorised supervisor fails to attend the office of the Engineer-in-Charge as per the time frame given here-in-before, an recovery shall be made @Rs. 1000/- per day. (vi) The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be addition to the provisions made in condition 50 of IAFW-2249 i.e. (Compensation for delay in completion of work). Note:- Tenderer/bidders are advised to visit the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later satge. |
| 3 | S&F in repairs bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 4 | S&F in repairs bib taps, long body, 15mm bore, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 5 | S&F in repairs bib tap, 15mm bore, standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms complete all as specified and directed. |
| 6 | S&F in repairs chromium plated brass angle valve for 15mm bore pipe complete all as specified and directed. |
| 7 | S&F in repairs two way chromium plated brass bib tap fancy type for 15mm mm bore pipe complete all as specified and directed. |
| 8 | S&F in repairs rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with screws steel with washer to doors complete all as specified and directed. |
| 9 | S&F in repairs chromium plated brass shower rose 100 mm dia with shower arm 190mm long swivel joints, as per sample kept in GE's office complete all as specified and directed. |
| 10 | S&F in repairs pillar taps, 15mm bore, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 11 | S&F in repair 15 mm bore CP brass Basin mixer single lever for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. MAKE: Jaquar Model No FLS CHR- 5179B |
| 12 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valve less, syphonic action type with inlet, ball valve float and handle including bracket and flush pipe 32 mm dia, complete all as specified and directed. |
| 13 | S&F in repairs PVC flush pipe 32 mm dia, for low level flushing cistern complete all as specified and directed. |
| 14 | S&F in repairs plastic water closet seat cover black/white premium quality of pattern including fixing to existing divice and chromium plated nuts complete all as specified and directed. |
| 15 | S&F in repairs vitreous china wash-down water closet pan & trap (pedestal pattern) with plastic water closet seat cover with flat bottom and cover and mild steel chromium plated or aluminium hinging device with flush pipe to pedestal pan including all joints including connection to drain pipe and flush pipe, complete all as specified and directed. |
| 16 | S&F in repairs wash down water closet Orissa pattern of size 580x440mm white with integral foot rests and trap, including connection to drain and to flushing pipe with and including cost of making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan, complete all as specified and directed. |
| 17 | S&F in repairs vitreous china wash basin, white flat back size 550 x 400 mm excluding chain and plug and porcelain stopper but including brackets all as specified & directed including 32 mm bore CP based wastle coupling, fittings and PVC waste pipe suitable for 32mm bore complete all as specified and directed. |
| 18 | S&F in repairs vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 19 | S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts complete all as specified and directed. |
| 20 | S&F in repairs grating doom 125 mm dia with or with out waste hole of CP with and including white cement for fixing complete all as specified and directed. |
| 21 | S&F in repairs PVC waste pipe 32 mm dia, 100 cm long for wash hand basin/urinal/sink with cup complete all as specified and directed. |
| 22 | S&F in repairs 32 mm bore bottle trap of Chromium plated having minimum water seal of 25 mm complete all as specified and directed. |
| 23 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 24 | S&F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 26 | S&F in repairs stainless steel waste coupling for WHB and stainless steel sink 32 mm to 40mm dia set with rubber washer plug all as specified and directed. |
| 27 | S&F in repairs sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed. |
| 28 | S&F in repairs aluminium anodised handles of extruded section 125 mm long, fabricated type complete all as specified and directed. |
| 29 | S&F in repairs aluminum, anodized, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 30 | S&F in repairs aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 31 | S&F in repairs butt hinges, medium weight, cold rolled mild steel 100mm size fixed with necessary screw or welding as required complete all as specified and directed . |
| 32 | S&F in repairs 100mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 33 | S&F in repairs aluminium door closer (Die cast body) for aluminium door envoronment conditions accessibility to closer arm space limitations on the top rail of door closer position, complete all as specified and directed. |
| 34 | S&F in repairs aluminum, anodized, hasp and staple safety type 125 mm size complete all as specified and directed. |
| 35 | S&F in repairs aluminium , barrel tower bolts 200 mm long complete all as specified and directed. |
| 36 | S & F in repairs brass hat pegs and hooks, solid body, 125mm to 175 mm complete all as specified and directed. |
| 37 | S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including replacement of damaged wooden beading/cleats. |
| 38 | S&F in repairs sheet glass 4 mm thick, ordinary quality and glazing with oil putty rubber beading/aluminium beading in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed. |
| 39 | S&F in repairs frosted glass 4 mm thick pin head type and glazing with oil putty/rubber beading/aluminium glazing clips in squares n. exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed. |
| 40 | S&F in repairs 25 mm dia stainless steel curtain rod complete all as specified and directed. |
| 41 | S&F in repairs stainless steel desingned end brackets with roller fixed with screws complete all as specified and directed. (Design and colour approved by GE) |
| 42 | S&F in repairs plain fillets square/rectangular/triangular 2nd class hard wood beads sectional area n.exc 3 Sqcm for glazed or gauged Joinery, ceiling including secured with nails complete all as specified and directed. |
| 43 | S&F in repairs plain fillets square/rectangular/triangular 2nd class hard wood beads sectional area exc 6 Sqcm & n.exc 13 Sqcm for glazed or gauged Joinery, ceiling including secured with nails complete all as specified and directed. |
| 44 | S&F in repairs PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/laid in trenches or floors, 110mm bore fixed complete all as specified and directed. |
| 45 | S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed. |
| 46 | M&L for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including demolition and breaking up old damaged drain/rain water pipes 75mm dia set in cement mortar. |
| 47 | S&F in repairs PVC SWR bends 75 mm Bore. |
| 48 | S&F in repairs 110mm dia PVC (SWR) junction single, (Single T) equal or unequal |
| 49 | S&F in repairs 75mm dia PVC (SWR) junction single, (Single T) equal or unequal |
| 50 | S&F in repairs chromium plated brass toilet paper holder, superior quality complete all as specified and directed. |
| 51 | S&F in repairs chromium plated brass, soap dish, superior quality complete all as specified and directed. |
| 52 | S&F in repairs health faucet (ABS body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS wall hook including making connections with brass nuts for EWC complete all as specified and directed. |
| 53 | S&F in repairs stainless steel sink 1.00 mm thick with drainage board for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 54 | S&F in repairs stainless steel sink 1.00 mm thick for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 55 | Taking down aluminium shutters of doors/window shutter sliding/openable any description exceeding 1 Sqm and not exceeding 2.50 Sqm each and refixing in the same opening after easing of rollers, sliding doors rollers ect and adjusting including replacement of rubber beading, aluminium glazing clips dameged aluminium sections and refixing broken butt hinges/tower boalt as required and renewal of unserviceable screws complete all as specified and directed.NOTE:- Aluminium sections, handles, tower bolts, hinges, glass panes inserting panels will be measured and paid separately in respective items |
| 56 | Taking down aluminium shutters of window/ventilators shutter sliding/openable any description not exceeding Sqm each and refixing in the same opening after easing of rollers, sliding doors rollers ect and adjusting including replacement of rubber beading, aluminium glazing clips dameged aluminium sections and refixing broken butt hinges/tower boalt as required and renewal of unserviceable screws all as specified and directed.(Note:- Aluminium sections, handles, tower bolts, hinges, glass panes inserting panels will be measured and paid separately in respective items) |
| 57 | S&F in repairs PVC mirror cabinet, coloured of size 450x600 mm fixed with screw and PVC gutty on wall complete all as specified and directed. Make: Prayag Cat part No : 551 or equivalent model of make as approved. |
| 58 | S&F in repairs 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work fixed with screws to aluminium door shutters complete all as specified and directed. |
| 59 | M & L 18/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work complete all as specified and directed. |
| 60 | S & F Continuous (piano) hinges, 40mm width of flaps(when open) mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 61 | S&F in repairs SS telescopic channel/slider, 450mm long extruded MS galvanised over rollers of approved make complete all as specified and directed. |
| 62 | S&F in repairs 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed. |
| 63 | S&F in repairs 1000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed. |
| 64 | S&F in repairs 2000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed. |
| 65 | S&F in repairs 5000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed. |
| 66 | S&F in repairs PVC Tanks Lid suitable for rotational moulded polyethene water storage tanks of capacity 500/1000/2000/5000 litre with locking arrangement complete all as specified and directed. |
| 67 | S&F in repairs ball valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 68 | S&F in repairs 25mm bore dia of pipe ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | S&F in repairs 25mm bore dia of pipe ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender