Tender For Special Repair To Security Fencing P-1079 At Naval Station Karanja
Tender Value
24.22 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
21 days left
EMD
48440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Security Fencing P-1079 At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in in concrete, brick work, masonry work, etc. complete all as specified and directed |
| 2 | Dismantaling fencing wire mesh, any type, complete all as specified and directed. |
| 3 | Demolition of stone / brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 4 | All as per srl item No. 3 above but pre-cast concrete block walling complete all as specified and directed. |
| 5 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. . |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided incl doors, gates for complete all as specified and as directed |
| 7 | M&L for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and directed. |
| 8 | M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed black etc including necessary form work complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6 type C-2, using 40 mm graded stone aggregate as in foundation, filling and mass complete all as specified and directed |
| 10 | M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed |
| 11 | M&L for brick work with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed |
| 12 | All as per srl item No. 11 here in before but except bricks, complete all as specified and directed Note:- Serviceable bricks obatined from srl item No. 3 shall be re-used under this after cleaning etc complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed |
| 14 | All as per item No. 13 hereinbefore but except stone, complete all as specified and directed. Note:- Stone obtained from item No 03 shall be reused under this item. |
| 15 | M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed. |
| 16 | M&L for raised pointing to precast concrete block masonary wall in CM (1:4) complete all as specified and directed. |
| 17 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and directed |
| 18 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work /concrete surfaces ,finished even and smooth without using extra cement complete all as specified and directed. Note:- The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account. |
| 19 | M&L for preparation of new or previously plastered surfaces of any description & applying two coats of white wash on walls complete all as specified and directed |
| 20 | Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction complete all as specified and directed by Engr-in-Charge |
| 21 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil, complete all as specified and directed. |
| 22 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire mesh, etc.; flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 23 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but, length of bolt exc. 5cm but n. exc. 10cm long, (Diameter of neck in 11 to 15 mm), complete all as specified and directed. |
| 24 | S&F mild steel security chain link fencing 60mmx60mm with PVC coated mesh made out of 3.0 mm dia MS wire and 1.00mm thick PVC coating etc. complete all as specified and directed. |
| 25 | S&F in repair to Galvanized 2 stand Steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standerd rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down of existing barbed wire (each line of wire to be measured) complete all as specified and directed by Engr-in-Charge |
| 26 | S&F in repairs any dia concertina coil, reinforced punched (Chrome razor or blade wire) with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing including taking down of existing concertina coil complete all as specified and directed by Engineer–in-Charge |
| 27 | S&F mild steel round bars 10mm dia and over, in horizontal support for chain link straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed. |
| 28 | M&L for preparation of new steel surfaces of any description n. exc. 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender