Tender For Providing Peb Roofing System And Flooring To The Existing E2 And E3 Godowns At Chennai Portother Allied Civil Works Etc. Sub-Head: Pre Engineering Building (Peb) Including Electrical Work And Other Allied Civil Works Etc
Tender Overview
Project Description
Tender for Providing Peb Roofing System And Flooring To The Existing E2 And E3 Godowns At Chennai Portother Allied Civil Works Etc. Sub-Head: Pre Engineering Building (Peb) Including Electrical Work And Other Allied Civil Works Etc
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | PROVIDING PEB ROOFING SYSTEM AND FLOORING TO THE EXISTING E2 AND E3 GODOWNS AT CHENNAI PORT.”SUB-HEAD: Pre Engineering Building (PEB) including Electrical Work and other Allied Civil Works etc |
| 3 | \\"NOTE:-THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST.\\" Please Enable Macros to View BoQ information |
| 4 | 2.0 CIVIL WORK EARTH WORK |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All Kinds of soil |
| 6 | Earth work excavation additional lift of 1.5 m or part thereof in excavation banking excavated or stacked materials. All kinds of soil |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 9 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.. All kinds of soil |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Plain Cement concrete |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) Centering & Shuttering Work Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 12 | Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts. Reinforcement Concerete |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 Kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All work upto plinth level |
| 16 | Concrete of M30 grade with minimum cement content of 350 kg /cum All work from plinth level upto floor V level. |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 18 | Add for using extra cement in the items of design mix over and above the specified cement content therein. Reinforcement Steel Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Upto plinth level |
| 19 | Thermo-Mechanically Treated bars of grade Fe-550D or more. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 20 | Thermo-Mechanically Treated bars of grade Fe-500D or more. BRICK WORK Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 21 | Cement mortar 1:6 (1 Cement : 6 coarse sand) FINISHING WORK 12 mm cement plaster of mix : |
| 22 | 1:6 (1 cement: 6 fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 23 | 1:6 (1 cement: 6 fine sand) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). |
| 24 | Depth not exceeding 1.5 m |
| 25 | Depth exceeding 1.5 m but not exceeding 3 m |
| 26 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 27 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 28 | 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge |
| 29 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 30 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 31 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 32 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 33 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads up to 3.km including all lifts involved. |
| 34 | Providing Main Door - Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Road Remaking |
| 35 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motorgrader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 36 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 37 | Providing and laying design mix cement concrete of M-35 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Concrete grade M-35 (Cement content 370 kgs) Tie Bar Payed Under Relevent item 5.22.6 |
| 38 | Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints. |
| 39 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) |
| 40 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make Pre-Engineering Building |
| 41 | supply, fabrication and erection of steel structures:Preparation of Shop Drawings, Manufacturing, Fabrication, Supply, Loading, Transportation to site, Unloading, Erection of STEEL PRE-ENGINEERED Frame with Truss/ Rafter, for the E2 and E3 Godown of span 31.466m (centre to centre of Steel Columns), consisting of rafters, bracings, sag rod, stiffeners, Gusset plates, Stich plates, primary & secondary connection bolts and nuts, anchor bolts & connection bolts, weldding,non shrink 50mm Grouting etc., of overall frame weight not less than 5.9 MT for Grid no. 2,3,35&36, 5.3 MT for Grid no. 4 to 34 and 6.8 MT for Grid no. 1 & 37 per number including providing staging, scaffoldings & working platforms at all heights, and removal of same after erection, including preparing the surface for painting and applying two coats of Epoxy paint over two coats of Epoxy Primer to structural steel members and a final correction coat of epoxy paint at site, all as per drawings and relevant specifications and as directed including all labour, fuel, materials, fixtures, equipment, scaffolding, tools, cranes etc., complete.Note: 1. Material Grade for PEB frame: S345 (Fy = 345 N/mm2) 2. Material Grade for Hot rolled members: S250 (Fy = 250 N/mm2) 3. Material Grade for Anchor Bolt (ASTM-A36) GI With Nut & Washer: GRADE-4.6 ( Ft = 240 N/mm2) 4. Material Grade for Primary bolts (Galvanized): GRADE-8.8 ( Ft = 264 N/mm2) 5. Material Grade for Secondary Connection Bolts (Galvanized): GRADE-4.6 ( Ft = 240 N/mm2) 6. The Contractor should submit detailed fabrication drawings to M/s BANDR for their checking and submission for the approval of Chennai Port Authority. |
| 42 | Supply and erection of Cold Formed Members (Purlins, SW girt, EW girt and Gable Angle): Material Grade for Cold Formed Members: Grade 345, Coating Z275GSM (Fy = 345 N/mm2) |
| 43 | COLOR COATED STANDING SEAM ROOFING: Supply of continuous length pre-painted Zincalume 360 degree FORTISS™ 470 standing seam panels shall be 470mm effective cover width, 73mm rib height, with strengthening rib/flute in the pan for strength. The end lap shall be seamed with 360 degree seeming using Seamer machine. The sheeting material shall be 0.50 mm Base Metal Thickness (BMT), (0.55mm TCT, Excluding Paint thickness). The steel sheet is having high tensile strength G345 (Fy=345Mpa), metallic coated with Zinc-Aluminium alloy (i.e. 55% Al, 43.4% Zinc, 1.6% Si - Zincalume), AZ150 (min 150 g/m2 total on both side), pre-painted with Super Durable Polyester (SDP) NextGen COLORBOND® XRW quality paint includes inorganic infrared reflective pigment (High SRI-\\"Thermatech technology\\") of 20µm exterior coat on top surface and 5µm reverse coat on back surface over 5µm primer coat on both surfaces of approved color shade by concern authority.Roof coating/ paint should have a high solar reflectance index (SRI). For low sloped roofs (slope = 2:12) SRI should be min. 87% (Surfmist (RAL 9002)). For steep sloped roofs (slope >/= 2:12) SRI should be min. 29%. Colour and Sample/Profile to be approved by Client at the time of drawing approval. Steel supplier shall provide 12 yrs warranty on color fading (Delta E max 12 units in dark color and 6 in Light color) The sheet conforms to general requirement of AS/NZS 2728 type 4 / IS 15965 class 3 durability of Tata BlueScope Steel make. The sheet shall be IGBC Green pro, Griha, EPD certified and steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg, name, etc.) on back side at regular interval confirming genuinity of the material. |
| 44 | Supply and erection of 0.5mm galvalume sheet on side/end cladding: pre-painted metallic-coated steel Cladding sheets, manufactured from 0.45 mm Base Metal Thickness (BMT) steel, roll-formed into a trapezoidal profile with 1015 mm effective cover width, incorporating five major corrugations, 28 mm high ribs at 203 mm c/c spacing, and subtle square fluting in the pan for enhanced rigidity and aesthetics. The profile shall be provided with an anti-capillary groove and return leg at the end rib to ensure weather-tight performance.The Cladding sheets shall be manufactured from BIS-approved hot-dip Zinc-Aluminium alloy coated steel (AZ150 coating mass) & having a minimum yield strength of 550 MPa (Fy = 550 MPa) conforming to IS 15961. The steel substrate shall be factory pre-painted with a nominal 20-micron dry film thickness (DFT) ultra-durable polyester topcoat, incorporating inorganic ceramic infrared-reflective pigments and/or mica-based pigments for selected shades, applied over a 5-micron corrosion-inhibitive polyester primer. On the reverse side coating shall consist of a nominal 10-micron DFT system, including a 5-micron primer coat, in a natural grey finish. The pre-painted steel shall comply with IS 15965 (Class 3) requirements. The roofing material shall be Colorcoat® or approved equivalent, and the coating system shall be free from heavy metals such as Lead (Pb), Mercury (Hg), Cadmium (Cd), and other restricted substances. The product shall be IGBC GreenPro Ecolabel certified and/or supported by a valid Environmental Product Declaration (EPD). The selected colour shall provide a Solar Reflectance Index (SRI) of not less than 82.The pre-painted steel items 1 and 2 shall carry a manufacturer's warranty of up to 12 years against colour fading, limited to a colour variation range (Light- Dark of ΔE4 to ΔE10) as measured in accordance with ASTM D2244, and shall provide a service life of up to 20years against corrosion leading to perforation under natural weathering conditions.Tata BlueScope Steel make. |
| 45 | Supply and erection of Eave Gutter: G345 (345 MPa yield strength) ZINCALUME AZ150 (150g/m2) |
| 46 | Supply and erection of Ridge Panel: G345 (345 MPa yield strength) ZINCALUME AZ150 (150g/m2) |
| 47 | Supply and erection of Louvers: Grade 345, Coating Z275 (Fy = 345 N/mm2) |
| 48 | Supply and erection of Flashing & Trims: G345 (345 MPa yield strength) ZINCALUME AZ150 (150g/m2) |
| 49 | Supply and erection of Downpipe (PVC):4inch Dia (110 mm / 4 kg/cm²) Note: |
| 50 | Supply and erection of Downpipe (PVC):4inch Dia (110 mm / 4 kg/cm²) Note: |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender