Water Resources and Irrigation Boards / Undertakings / PSU Closing in 16 days TDR #58638022

Tender For Renovation Of Suite No. 5&6 Of Dehar Guest House Bbmb Colny At Slapper.

Issued by Boards / Undertakings / PSU · Mandi, Himachal Pradesh
Tender Value
7.15 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
14310
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Renovation Of Suite No. 5&6 Of Dehar Guest House Bbmb Colny At Slapper.

BOQ

Name of Work:- Renovation of suite No. 5&6 of DEHAR Guest house BBMB colny at Slapper.
Sl. No. Item Description
1Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below.
2(b) Windows of area 3 sqm and below
3Dismantling glazed tiles (to be carefully removed).
4Scraping (a) White wash and colour wash
5First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.
6Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place withina distance of 100 Mtrs of the complex complete in all respect.
7Dismantling concrete (d) Cement concrete plain1:2:4 mix
8Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. (c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
9Removing and refixing PVC wall paneeling and ceiling including cost of screw, L section etc. and new panneling also where as required complete in all respection as per satisfaction of Engineer in charge
10Providing and fixing hydraulic door closer ISI mark with necessary screw etc.complete (c ) I.S.I Designation No. III (size of door 851mm to 1000mm)
11Factory manufactured solid flush door fixed inposition iron hinges, etc (excluding the cost of any fittings other than specifiedabove but including labour for fixing the same in position (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick
12Providing & fixing 9\\" stainless steel handles ISI marked on door & windowframes complete in all respect as per the directions of Engineer-in-charge.
13Providing & fixing 8\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
14Providing and fixing aluminum grill 6.3 mm including cost of necessary fittingsi.e. screws,u Type Beading etc. complete
15Providing & fixing ACP Sheets of various thickness High Class ISI markedcomplete in all respect as per the directions of Engineer-in-charge. (i) 6mm thick ACP Sheet
16Wire gauze deodar wood door shutter without springs housed in chowkats(Single Leaf) (i) 35 mm thick
17Providing and fixing glazing in aluminum door, window, ventilator shutters andpartitions etc. with PVC Plug/ neoprene gasket etc. complete as per thearchitectural drawings and the directions of engineer-in-charge . (Cost of aluminumsnap beading shall be paid in basic item)(i) Float glass panes of 5 mm thickness
18Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour or shade with nuts and screws etc. complete : (A) 300mm x 16mm
1912.5 mm thick cement plaster 1:4
20Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
21Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
22Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
23Cement concrete 1:4:8 (a) with stone ballast 20mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type
24Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25Providing and fixing curtain rail 1.90cm chrome-plated with end bracket. Including sockets and brackets
26Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
27Providing and fixing in position Chinaware Floor Mounted One Piece EWC type withmatching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.
28Providing and fixing in position vitreous chinaware white lavatory suites of approvedmake (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.(iii) Size 630 mm x 450 mm x 830 mm
29Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (i) Vitreous chinaware standard white pedestal for wash hand basin.
30Providing and fixing in position paper holders of approved make (to the approval ofEngineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. (a) C.P. brass toilet paper holder
31Providing and fixing in position towel rails /ring of approved make (to the approval ofEngineer-in-charge ) fixed in with rawl plugsembedded in walls with brass screwscomplete in all respect. (b) C.P brass towel ring
32Providing and fixing in position C.P. brass soap dish of approved make (to theapproval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
33Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (ofapproved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (a) Size 600mmx450mm
34Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.(a) C.P. brass Bib cock long nose/long body foam flow without flange
35Providing & Fixing in postion stop cock / Angle valve of approved make (to theapproval of Engineer-in-charge ) complete in all respect. (a) C.P.brass 15mm stopcock Male and female end
36Providing & fixing in position PVC flexible tube connection of approved make (to theapproval of Engineer-in-charge ) complete in all respect. (f) PVC tube connection of size 15mm x 600 mm with C.P. Brass nut
37Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A (a) 160mm o/d single socket SWR UPVC pipe lines laid complete
38Providing and fixing in position C.I. gully trap cover weighing approximately 7.26 kg and frame for gully trap chamber clear opening size 300mm x 300mm and out side size 330mmx330mm including painting the exposed surface with 3 coats of blackbitumastic superior paint of approved manufacture etc.
39Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputedfirm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg)
40Providing and fixing in position automatic brass Ball Cock in tanks. (A) Plastic Ball Cock with rod and Plastic Ball (v) 50mm i/d
41Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks
42Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. (a) G.I. tank nipple 15mm i/d
43Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (a) 15mm i/d
44(b) 20 mm i/d
45Providing and fixing Door and window curtains complete in all respect (colour and design as per direction or satisfaction of engineer in charge)
46Providing and fixing 25 liter capacity electric water geyser 5 star complete in all respect as per satisifaction of engineer in charge
47Providing and fixing 45 to 50 inch LED TV of reputed make complete in all respect as per satisifaction of engineer in charge
48Providing and fixing 5 star window AC 1.3 ton to 1.7 ton of reputed make complete in all respect as per satisifaction of engineer in charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58638022
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 7.15 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Bhakra Beas Management Board
Work Description Tender for Renovation Of Suite No. 5&6 Of Dehar Guest House Bbmb Colny At Slapper.
Basic Detail
Tender No 402/REDPH/BBMB
Bidding Type Tender
Location
City Mandi
State Himachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 7.15 Lakhs
Tender Fee Ref. Documents
EMD 14310
Exemption Available
Document List
2d586ff2-9a71-4f53-9842-6c2b9e019b9c.html
BOQ_347749.xls
NITdocumentGuestHouse.pdf
TechnicalSpecification.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
html

2d586ff2-9a71-4f53-9842-6c2b9e019b9c.html

xls

BOQ_347749.xls

pdf

NITdocumentGuestHouse.pdf

pdf

TechnicalSpecification.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender