Tender For special Repair To Bldg No T/123 Office Complex And special Repair To Bldg No P-14 (Toilet Block) And T/Fps-234 (Office Shelter) Of 297 Fd Wksp Coy Eme At Gandhidham Mil Stn Under Ge (A) Bhuj.
Tender Value
34.23 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
68466
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T/123 Office Complex And special Repair To Bldg No P-14 (Toilet Block) And T/Fps-234 (Office Shelter) Of 297 Fd Wksp Coy Eme At Gandhidham Mil Stn Under Ge (A) Bhuj.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed. |
| 2 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc complete all as specified and directed. |
| 3 | M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 4 | M & L for rendering 10 mm thick in CM (1:4) on fair faces of stone work complete all as specified and directed. |
| 5 | M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 6 | Taking down cement plaster of any description from stone wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 7 | M & L for 15 mm thick plaster in CM (1:6) on stone work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for rendering 20 mm thick in CM 1:4 on concrete / fair surfaces of stone masonary and including mixing water proofing compound as per manufactureres instructions and finished even and smooth without using extra cement complete all as specified and directed.Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch \\"A' as supply only |
| 9 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 10 | Preparation of new surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash on ceiling surface complete all as specified and directed. |
| 11 | M & L for 5 mm thick plaster in CM (1:3) on brick work / RCC concrete surfaces of ceilings complete all as specified and directed. |
| 12 | M & L for preparation of newly plastered ceiling surfaces and applied three coats of white wash complete all as specified & directed. |
| 13 | M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specifed and direcetd. |
| 14 | M & L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint complete all as specifed and direcetd. |
| 15 | M & L for preparation of newly plastered wall surfaces and Providing and applying 3mm thick wall care putty on wall to prepare the surface even and smooth. and Material and labour for two coats of distemper oil emulsion white or tinted including priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 16 | M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 17 | Demolition and breaking up drain pipes upto 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed. |
| 18 | Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed. |
| 19 | Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed. |
| 20 | Supply and fixing of PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified and as directed. |
| 21 | Supply and fixing of PVC (SWR) bends any radius suitable for 110mm bore PVC pipes with access door complete all as specified and as directed. |
| 22 | Supply and fixing of PVC (SWR) bends any radius suitable for 75mm bore PVC pipes with access door complete all as specified and as directed. |
| 23 | Supply and fixing of PVC (SWR) vent cowl for 110mm bore PVC pipes complete all as specified and as directed. |
| 24 | Supply and fixing of PVC (SWR) WC connector bent type for 110mm bore PVC pipes complete all as specified and as directed. |
| 25 | Supply and fixing of PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 26 | Dismantling of water tanks and removing to store having Capacity of Exc 500 litres and n.exc 1000 litres complete all as specified and directed. |
| 27 | S & F for 1000 ltrs capacity rotational moulded polyethelene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 28 | S & F in repairs 20 mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 29 | S & F in repairs of Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210 gms) complete all as specified and directed. |
| 30 | Taking down chowkhats n exc 1.50 sqm each without taking off shutter each complete all as specified and directed. |
| 31 | Taking down chowkhats exc 1.50 sqm but n.exc 4 Sqm each without taking off shutter each complete all as specified and directed. |
| 32 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed. |
| 33 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed. |
| 34 | S & F powder coated anodised Aluminium alloy sections sliding windows with frames series -B (18mm) and ,3 track sliding shutter duly fitted with neoprene beading, glazing clips, two shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handles with or without opening for AC complete all as specified and directed. |
| 35 | S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 36 | S & F of aluminium handle 150 mm cast type anodised complete all as specified and directed. |
| 37 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed. |
| 38 | S & F of 30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, commercial type on both sides complete all as specified and directed. |
| 39 | M&L Pressed steel frames for doors of size 105x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,and as directed. |
| 40 | S & F of 300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 41 | S & F aluminium anodised ventilator with fixed aluminium frame of size 600 x 600 x 1.5mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4.0mm/5.5mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed. |
| 42 | M & L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works complete all as specified and directed. |
| 43 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store, complete all as specified and directed. |
| 44 | (a) 20 mm bore |
| 45 | (b) 25 mm bore |
| 46 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed of following sizes :- |
| 47 | (a) 20 mm bore |
| 48 | (b) 25 mm bore |
| 49 | S & F in repairs Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including trap and connection to drain and flushing pipe complete all as specified and directed. |
| 50 | S&F vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed complete all as specified and directed. |
| 51 | S & F in repair of two way angle cock chromium plated fancy type 15 mm bore of jaquar make catalog no. DLX-CHR-526AFKN or equivalent complete all as specified and directed. |
| 52 | S & F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 53 | S & F in repairs PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed. |
| 54 | S & F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 55 | S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 56 | S & F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated complete all as specified and directed. |
| 57 | S&F in repair over head Brass chromium plated shower rose sizes with shower arm 125mm dia . Round shape single flow with air effect shower. ( ABS Body & Face Plate Chrome Plated) complete all as specified and directed. |
| 58 | S & F in repairs CP Toilet Paper holder all as per cat part complete all as specified and directed. |
| 59 | S&F in repairs pillar cocks 15mm bore CP with 140 mm extension body and fixed. omplete all as specified and directed. |
| 60 | S&F in repairs vitreous china counter TOP wash basin, white, of size 425x425x145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete all as specified and directed. |
| 61 | S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore uPVC/PVC Pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S & F in repairs 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection mm thick of size 450 x 600 mm bevelled edge mirror of selected quality glass having decorative PU frame and fixed to walls using hidden studs complete all as specified and directed. |
| 63 | S & F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 64 | S & F as in repair grating round 150mm size of PTMT (minimum 100 gms) with waste hole of PTMT complete all as specified and directed. |
| 65 | S & F of floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed. |
| 66 | Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided and M & L for pre-cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in RCC 1:2:4 Type B-1 (using 20 mm graded stone aggregates) and placing in position and set in CM 1:4 complete all as specified and directed. |
| 67 | M & L for mild steel TMT bar 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 68 | M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 69 | Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc and disposing off rubbish) off the premises of cantonment complete all as specified and directed. |
| 70 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Modular bricks in cement mortar 1:6 including curing,racking of joints etc. complete all as specified & as directed. |
| 71 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & as directed. |
| 72 | M & L for 25 mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) as in padding to receive chequred tiling and all other similar works complete all as specified and directed. |
| 73 | M & L for glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as directed. |
| 74 | M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed. |
| 75 | S & F in repairs for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles and applying one coat of bituminous primer @ 200 gms per sqm and then laying 3 mm thick APP modified bituminous membrane weighing not less than 3.50 kg/sqm reinforced weighing not less than 160 gms/sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints and changes should covered with CM 1:3 with water proofing chemical as per manufacturer's instructions and cured well before laying membrane etc and applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces complete all as directed. |
| 76 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed. |
| 77 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc complete all as specified and directed. |
| 78 | M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 79 | Taking down cement plaster of any description from stone wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 80 | M & L for 15 mm thick plaster in CM (1:6) on block massonary work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 81 | M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specifed and direcetd. |
| 82 | M & L for preparation of old painted steel surfaces of any description not otherwise described over and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 83 | Demolition of ceiling boards of any description and any thickness including cover fillets and frame work complete all as specified and directed. |
| 84 | M & L for Anodised aluminium snap grid having Size of grid 605 x 605mm frame work for false ceiling all as specified complete all as specified and directed. |
| 85 | S & F in repairs to Harrison rails (Curtain Rails / Rod), anodised aluminium alloy, powder coated with fixing brackets, stops, rollers etc rate inclusive of brackets as per requirement complete all as specified and directed. |
| 86 | S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately). |
| 87 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving/plinth not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 88 | M & L for cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified and directed. |
| 89 | Providing and fixing factory made frame size 100mm x 65mm /125mm x 65mm single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Note : For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all complete as per drawings and the directions of Engineer-in-charge. |
| 90 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wiremesh door shutter of required size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 91 | Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed. |
| 92 | M & L for Anodised aluminium snap grid having Size of grid 605 x 605mm frame work for false ceiling all as specified complete all as specified and directed. |
| 93 | S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately). |
| 94 | Taking down of Wall panelling and similar work complete all as specified and as directed. |
| 95 | S & F of Solid PVC Wall Lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 96 | S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 97 | Taking down cement plaster of any description from stone wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 98 | M & L for 15 mm thick plaster in CM (1:6) on stone work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 99 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified. |
| 100 | S & F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 101 | S & F of 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection mm thick of size 800 x 600 mm bevelled edge mirror of selected quality glass having decorative PU frame and fixed to walls using hidden studs complete all as specified and directed. |
| 102 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 103 | S & F of mild steel Fe 410-W (Grade-Fe 250) quality A of Compound girders and stanchions,purlin ,rafter, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, baesment plate of water tank, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed. |
| 104 | Dismantling of water tanks and removing to store having Capacity of Exc 1000 litres and n.exc 2000 litres complete all as specified and directed. |
| 105 | S & F for 1000 ltrs capacity rotational moulded polyethelene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. |
| 106 | S & F in repairs 25mm bore ball brass valves,high pressure,with polythene float and flunut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 107 | S & F in repairs 20mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 108 | Excavating in post holes, in soft / loosel soil, (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n. exc. 50 m and making good surfaces complete all as specified and directed. |
| 109 | M & L for PCC 1:3:6 type C-2 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 110 | M & L for preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 111 | M & L for preparation of old painted steel surfaces of any description not otherwise described over and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 112 | Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving/plinth not exceeding 15 cm thick (below or above GL) complete all as specified and directed. |
| 113 | M & L for cement concrete type C-2, 1:3:6 (40mm graded aggregate), 75mm thick. as in plinth protection finished even and smooth without using extra cement including expansion joints complete all as specified and directed. |
| 114 | Taking down chowkhats exc 1.50 sqm but n.exc 4 Sqm each without taking off shutter each complete all as specified and directed. |
| 115 | S & F of 30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, commercial type on both sides complete all as specified and directed. |
| 116 | M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 117 | S & F of floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed. |
| 118 | S & F of 300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 119 | S & F of aluminium anodised 200mm barrel tower bolts of extruded section complete all as specified and directed. |
| 120 | S & F of aluminium handle 150 mm cast type anodised complete all as specified and directed. |
| 121 | S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed. |
| 122 | Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store, complete all as specified and directed. |
| 123 | (a) 20 mm bore |
| 124 | (b) 25 mm bore |
| 125 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed of following sizes :- |
| 126 | (a) 20 mm bore |
| 127 | (b) 25 mm bore |
| 128 | Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided and M & L for pre-cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in RCC 1:2:4 Type B-1 (using 20 mm graded stone aggregates) and placing in position and set in CM 1:4 complete all as specified and directed. |
| 129 | M & L for mild steel TMT bar 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 130 | Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc and disposing off rubbish) off the premises of cantonment all as specified & as directed. |
| 131 | M & L for Precast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate), exc. 10cm in width and setting in Cement mortar 1:6 complete all as specified & as directed. |
| 132 | Taking down chowkhats n exc 1.50 sqm each without taking off shutter each complete all as specified and directed. |
| 133 | S & F powder coated Aluminium alloy sections openable shutter windows with frames series -B (18mm) and , 2 shutters duly fitted with butt hinges, neoprene beading, glazing clips, two shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm aluminium, incl wire mesh cloth of complete windows, rubber packing, joining, cleats, 5.5mm thick glass incl clips, aluminium snap beading, U channles, locking arrangements, handles with or without opening for AC as directed. |
| 134 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws all complete as per architectural drawings and the directions complete all as specified and directed. |
| 135 | S & F of 5.5mm thick Sheet glass, ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 136 | S & F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed. |
| 137 | S & F of mild steel of 4 lever mortice lock,vertical type, for any size complete all as specified and directed. |
| 138 | S & F in repairs to Harrison rails (Curtain Rails / Rod), anodised aluminium alloy, powder coated with fixing brackets, stops, rollers etc rate inclusive of brackets as per requirement complete all as specified and directed. |
| 139 | S & F in repairs 50 micron coloured powder coated aluminium decorative grill design No DG-117,10 mm thick including F Sections complete all as specified and directed. Make :- M/s Deco grill / M/s Royal grill or Equivalent |
| 140 | M & L for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works complete all as specified and directed. |
| 141 | S&F in repairs vitreous china counter TOP wash basin, white, of size 425x425x145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete all as specified and directed. |
| 142 | S&F in repair pillar cock 15mm bore CP with 140mm extsion body and fixed complete all as specified and directed. |
| 143 | S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 144 | S & F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges brass chromium plated complete all as specified and directed. |
| 145 | S&F vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed complete all as specified and directed. |
| 146 | S & F in repair of two way angle cock chromium plated fancy type 15 mm bore of jaquar make catalog no. DLX-CHR-526AFKN or equivalent complete all as specified and directed. |
| 147 | S & F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 148 | S & F in repairs PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed. |
| 149 | S & F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 150 | S & F in repairs CP Toilet Paper holder all as per cat part complete all as specified and directed. |
| 151 | M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 152 | S & F as in repair grating round 150mm size of CP (minimum 100 gms) with waste hole of CP complete all as specified and directed. |
| 153 | Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface complete all as specified and directed. |
| 154 | Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface complete all as specified and directed. |
| 155 | M & L for Point wiring for one light/fan point controlled by one modular switch, one way, 1 module by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed. |
| 156 | (a) One light point controlled by one way one switch SP 5 Amps ,240 V. |
| 157 | (b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V |
| 158 | (c) One switch socket outlet 3 Pin, 6 Amps, SP on independent board. |
| 159 | (d) One switch socket outlet 3 Pin, 5 Amps, SP on same board. |
| 160 | All as per the above item No 3 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and directed. |
| 161 | S&F in replacement of modular switch one way 6 Amps , 1 module type complete all as specified and directed. |
| 162 | S&F in replacement of modular switch 1 way 16A, 1 module of one way complete all as specified and as directed. |
| 163 | S&F in replacement of modular socket , 6 Amps , 2/3 pin combined 2 module type complete all as specified and directed. |
| 164 | S&F in replacement of modular socket 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and directed. |
| 165 | S&F in replacement ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and directed. Make :- ANCHOR |
| 166 | Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement for fixing of tubelight fitting complete all as specified and directed. |
| 167 | S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed. |
| 168 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed. |
| 169 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified & directed (Note : Old electric water heater to be deposited in MES store yard for repair)) |
| 170 | Supply and fixing ceiling fans complete with three blades, down rods, Electronic modular regulator(one/two module as per site reqd) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with squirrel cage induction motor ,100% Copper Winding all as specified and directed. (Note :Old ceiling Fan to be deposited in MES store yard for repair ) |
| 171 | Supply and fixing in replacement of exhaust fan in made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep upto 300 mm complete all as specified and directed ( Note : suitable E/F place according to site ) |
| 172 | Supply & Fixing LED bldg light fitting luminaire 35 Watt IP-65/66, 230 volts, new generation energy saving & enviormental friendly long life versatile pressure die cast aluminium roadway luminarie with high power LEDs as light source and electronic driver alongwith suitable bracket required as per site for fixing the light complete all as specified & directed. |
| 173 | Supply and fix desert cooler electric driven ,single phase motor ofsuitable size with ISI marked, having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body 3 Side Honeycomb Cooling Pads specially processed anti-bacterial, anti-erosion, antideformation with hydrophilic property; absorb remainder dust particles, auto swing grill, Tank Capacity 55 Ltrs, completely Collapsible Louvers,water circulating pump of suitable size ,Rated power not less than 160W, volt rating 220-240 volts complete all as specified and directed. |
| 174 | S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 08 way, 240 Volts, sheet metal powder coated, IP 42 protection with 100 Amps rated bus bar, double door type complete all as specified and directed. |
| 175 | Supply and fix in replacement of the following items and disconnecting,taking out the old unserviceable one, including necessary replacemnet of Seperater,lugs ,nuts,bolts, washer of any size and capacity wherever reqd :- |
| 176 | (a) MCCB Thermal Magnetic release,Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 63 Amps 16 KA. (Note : MCCB Compact Size) |
| 177 | S&F MCB SPN 40 to 63 AMP 240 Volts, rupturing capacity 10 KA \\"C\\" Series complete all as specified and directed. |
| 178 | S&F MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA \\"C\\" Series complete all as specified and directed. |
| 179 | M&L for sub main wiring with two runs of 6 Sqmm (2x4 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 6 Sqmm (1x 6 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 6 Sqmm ( 2x6 sqmm + 1x 6 sqmm ) cable and one run of conduit will be measured as one unit and follow proper colour code for phase ,Neutral,Earth). |
| 180 | Supply ,laying and fixing in trenches / wall / pole wich complete acceseries GI tube light grade 40 mm bore from ground to DB with suitable size clamp complete ,nut bolt ,washers complete all as specified and directed. |
| 181 | M & L for Hard standing cutting/road cutting for laying of pipe and making surface good with PCC 1:3:6 complete all as specified and directed. |
| 182 | M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. |
| 183 | Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II. |
| 184 | (ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule. |
| 185 | Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge. |
| 186 | Disconnecting and taking out old existing steel/PVC tubing /PPR pipe and fitting and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 25 mm to 50 mm dia pipe complete all as specified and directed. Note :- Excavation & earth work shall be measured and paid for separately under respective item of Sch 'A'. |
| 187 | Supply and Fixing in any length UPVC pipe 25 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed. Note :Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches |
| 188 | Supplying and laying of CPVC pipes 25 mm did pipe as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings,SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed. (Note : include all cpvc pipe fiitings) |
| 189 | S & F in replacement of UPVC Ball valves with operating handle (stop valve) of size upto 20/25 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed. |
| 190 | Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed. |
| 191 | Rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed. |
| 192 | Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting pointxall complete all as specified & directed. |
| 193 | Cutting existing steel/ UPVC & CPVC tubing of any size for alterations, additions or insertions of new GI/CI/ UPVC/CPVC pipe of size upto 50 mm dia complete all as specified & directed. |
| 194 | Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 25 Sqmm, 2 core laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed. |
| 195 | All as per item 182 above but 50 Sq mm ,3.5Core complete all as specified & directed. |
| 196 | Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc incomplete all as specified & directed. |
| 197 | Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified & directed. |
| 198 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified & directed. |
| 199 | M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified & directed. |
| 200 | Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified & directed. |
| 201 | M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth Strip 25*4 by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board/LT Panel/High Mast Light panel complete .Earthing GI strip 25*4 mm and GI protection pipe 25 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. |
| 202 | Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 25 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.(iii) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge. |
| 203 | Supply, install, testing and commissioning and electric connection of feeder pillar outdoor type double door compartmentlized with locking arrangement canopy at top weather proof, vermin/ dust proof of suitable size cubical type factory made of CRCA sheet 3.15 mm thick machine pressed of size 60x60x40 cm and angleiron frame 40x40x6mm for legs and incl grouted in PCC 1:2:4 type B1 suitable for 440 volts, AC 3 phase 4 wire Bus Bar (4 Way) 4 pole made out of suitable size copper strip capacity 200 Amps mounted on porcelean insulator enclosed chamber with openable shutter both sides all as specified and directed. (Location : Near by P-14 Toilet) |
| 204 | Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface complete all as specified & directed. |
| 205 | Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface complete all as specified & directed. |
| 206 | M & L for Point wiring for one light/fan point controlled by one modular switch, one way, 1 module by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed. |
| 207 | (a) One light point controlled by one way one switch SP 5 Amps ,240 V. |
| 208 | (b) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V |
| 209 | (c) One switch socket outlet 3 Pin, 6 Amps, SP on independent board. |
| 210 | (d) One switch socket outlet 3 Pin, 5 Amps, SP on same board. |
| 211 | All as per the above item No 3 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified & directed. |
| 212 | S&F in replacement of modular switch one way 6 Amps , 1 module type complete all as specified & directed. |
| 213 | S&F inreplacement of modular switch 1 way 16A, 1 module of one way complete all as specified and as directed. |
| 214 | S&F in replacement of modular socket , 6 Amps , 2/3 pin combined 2 module type complete all as specified & directed. |
| 215 | S&F in replacement ofmodular socket 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified & directed. |
| 216 | S&F in replacement ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified & directed. Make :- ANCHOR |
| 217 | S&F fan Modular regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed. |
| 218 | Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement for fixing of tubelight fitting complete all as per directed by Engr-in-charge. |
| 219 | S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed. |
| 220 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed. |
| 221 | Supply and fixing ceiling fans complete with three blades of 1.5 mm thickness, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 220 CFM with service value 6.00 BEE, five star rated with squirrel cage induction motor 100 % Copper Winding all as specified and directed. (Note :Old ceiling Fan to be deposited in MES store yard for repair ) |
| 222 | Supply and fixing Bajaj Esteem 400mm sweep, Double String, silent operation, single phase, 230 Volts, 3 blade Wall Mounted Fan with all fixing accessories all as specified and directed. |
| 223 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified & directed ( Note : Old electric water heater to be deposited in MES store yard for repair)) |
| 224 | Supply and fix desert cooler electric driven ,single phase motor ofsuitable size with ISI marked, having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body 3 Side Honeycomb Cooling Pads specially processed anti-bacterial, anti-erosion, antideformation with hydrophilic property; absorb remainder dust particles, auto swing grill, Tank Capacity 55 Ltrs, completely Collapsible Louvers,water circulating pump of suitable size ,Rated power not less than 160W, volt rating 220-240 volts complete all as specified & directed. |
| 225 | Supply and fix in replacement of exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep upto 250 mm complete all as specified and directed. (Note : suitable E/F place according to site ) |
| 226 | Supply & Fixing LED bldg light fitting luminaire 35 Watt IP-65/66, 230 volts, new generation energy saving & enviormental friendly long life versatile pressure die cast aluminium roadway luminarie with high power LEDs as light source and electronic driver alongwith suitable bracket required as per site for fixing the light complete all as specified & directed |
| 227 | Supply and fixing in replacement of LED Bolard new generation ,energy saving, environmental friendly , long life aesthetically designed aluminum landscape for diffused lighting with high power LEDs ,IP65 protection and impact of capacity 20 Watt including suitable PCC foundation complete all as specified and directed. |
| 228 | S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended bu insulating hangers not more than 1 metre apart incl 4mm suspension wire, one twin core cable flat or circular complete all as specified &directed. |
| 229 | S&F sheet metal enclosures for distribution board when MCB to be used V-TPN (Triple pole and neutral) 6 way, 415 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, single door type including MCCB 63 Amp & 16 KA complete all as specified and directed. ( Note : Double Door) |
| 230 | S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 08 way, 240 Volts, sheet metal powder coated, IP 42 protection with 100 Amps rated bus bar, double door type complete all as specified and directed. |
| 231 | Supply and fix in replacement of the following items and disconnecting,taking out the old unserviceable one, including necessary replacemnet of lugs ,nuts,bolts, washer of any size and capacity wherever reqd :- |
| 232 | (a) MCCB Thermal Magnetic release,Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 63 Amps 16 KA. (Note : MCCB Compact Size) complete all as specified & directed. |
| 233 | S&F MCB SPN 40 to 63 AMP 240 Volts, rupturing capacity 10 KA \\"C\\" Series complete all as specified & directed. |
| 234 | S&F MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA \\"C\\" Series complete all as specified & directed. |
| 235 | Supply ,laying and fixing in trenches / wall / pole wich complete acceseries GI tube light grade 40 mm bore from ground to DB with suitable size clamp complete ,nut bolt ,washers complete all as specified & directed. |
| 236 | M&L for sub main wiring with two runs of 4 Sqmm (2x4 sqmm )1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 4 Sqmm (1x4 sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 4 Sqmm ,one run of 4 Sqmm ( 2x4 sqmm + 1x 4 sqmm ) cable and one run of conduit will be measured as one unit and follow proper colour code for phase ,Neutral,Earth). |
| 237 | M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. |
| 238 | Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 25 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.(iii) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge. |
| 239 | Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 35 Sqmm, 3.5 core laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed. |
| 240 | Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as specified & directed. |
| 241 | Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified & directed. |
| 242 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified & directed. |
| 243 | M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified & directed. |
| 244 | Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified & directed. |
| 245 | Disconnecting and taking out old existing steel/PVC tubing /PPR pipe and fitting and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 25 mm to 50 mm dia pipe complete all as specified and directed. Note :- Excavation & earth work shall be measured and paid for separately under respective item of Sch 'A'. |
| 246 | Supply and Fixing in any length UPVC pipe 25 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed. Note :Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches |
| 247 | Supplying and laying of CPVC pipes 25 mm did pipe as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings,SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed. (Note : include all cpvc pipe fiitings) |
| 248 | S & F in replacement of UPVC Ball valves with operating handle (stop valve) of size upto 20/25 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed. |
| 249 | Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed. |
| 250 | Rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed. |
| 251 | Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed. |
| 252 | M & L for Hard standing cutting/road cutting for laying of pipe and making surface good with PCC 1:3:6 complete all as specified and directed. |
| 253 | Cutting existing steel/ UPVC & CPVC tubing of any size for alterations, additions or insertions of new GI/CI/ UPVC/CPVC pipe of size upto 50 mm dia all as specified and directed |
| 254 | NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender