Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58637997

Tender For Repair To Internal Wiring To Certain Otm/Tech Building At Af Stn Sonegaon.

Issued by Statutory Bodies & Commissions/Committees · Nagpur, Maharashtra
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair To Internal Wiring To Certain Otm/Tech Building At Af Stn Sonegaon.

BOQ

Name of Work:- REPAIR TO INTERNAL WIRING TO CERTAIN OTM/TECH BUILDING AT AF STN SONEGAON.
Sl. No. Item Description
1Taking drawn carefully old aluminium/copper point wiring for one light, socket or power etc. including all fittings such as switches sockets, holders, light fittings, fan regulators etc. and making good the disturbed surface of wall ceiling complete all as specified and directed.
2Point wiring complete with 1.5 Sq mm PVC insulated cable with copper conductor 1100 Volts grade, multi-stranded flame retardant low smoke (FRLS) in and including PVC conduit and conduit accessories of 20 mm dia concealed in walls, roof etc. with and including provision of 1.6mm thick MS terminal boxes concealed/ surface in walls with 3 mm thick laminated hylam sheet top cover for fixing switches, switch sockets outlets etc including provision of 1.5 Sqmm multi-stranded copper conductor cable PVC insulated unsheathed as earth continuity cable for one light point controlled by one switch complete all as specified and as directed.
3All as per item No 2.00 mentioned here-in-before but for One fan point controlled by one switch and regulator.
4All as per item No 2.00 mentioned here-in-before but for One socket outlet 3 pin 5 amps on same board.
5All as per item No 2.00 mentioned here-in-before but for One socket outlet 3 pin 5 amps on independent board.
6All as per item No 2.00 mentioned here-in-before but for One bell point controlled by one switch.
7All as per item No. 2.00 above but with 4 Sq mm cable for one 3 pin 15 amps switch socket outlet on independent board with 4 Sq mm cable for earth wire drawn through and including 20mm dia PVC conduit and accessories complete all as specified and directed.
8M & L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS) in including PVC rigid non-metallic 25 mm PVC casing capping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machine screw and cap washer including size 1.5 Sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and directed.
9All as per Item No 8.00 mentioned here-in-before but for one ceiling fan / Exhaust fan point, controlled by one way switches 5/6 Amps.
10All as per Item No 8.00 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the independent board.
11All as per Item No 8.00 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the same board with other switches.
12All as per Item No 8.00 here-in-before but for one bell/ buzzer point controlled by one bell push button on independent board.
13All as per Item No 8.00 here-in-before but for point wiring with 4 Sq mm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15/16 Amps on the independent board.
14S & F Lamp holder, insulated body, with back plate suitable for batten fittings/pendent fittings white/ivory finish complete all as specified and as directed.
15S & F Switch piano flush button, White/Ivory finish, 5/6 amps, single pole, one way complete all as specified and as directed.
16S & F Bell/buzzer push 5/6 amps, flush type, white/ivory finish complete all as specified and as directed.
17S & F Ding dong bell, AC, Single pole, 220/240 Volts, white/ivory finish, surface type complete all as specified and as directed.
18S & F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non-shutter, non inter locking type White/Ivory finish complete all as specified and as directed.
19S & F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, White/Ivory finish, flush non shutter non inter locking type complete all as specified and as directed.
20S & F Sheet metal enclosure for 2 Way Distribution Boards (DB’s), single door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/isolators after and including taking down old DB with MCB complete all as specified and directed.
21S & F Sheet metal enclosure for 4 Way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB\\"S/isolators after and including taking down old DB with MCB complete all as specified and directed.
22S & F Sheet metal enclosure for 8 Way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB\\"S/isolators after and including taking down old DB with MCB complete all as specified and as directed.
23S & F Sheet metal enclosure for 4 Way Distribution Boards (DB’s), double door, Triple pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB\\"S / isolators after and including taking down old DB with MCB complete all as specified and directed.Note for Item Ser No 20.00 to 23.00: - (i) The rate quoted by the contractor shall include the rate for dismantling and taking out old DBs including disconnecting electrically and reconnecting electrically.(ii) The rate quoted by the contractor shall include the rate for making good the disturbed surface by applying white cement/POP to match with existing surface.
24S & F Ceiling rose, surface Bakelite, large type, 220/240 volts, three terminals, white/ivory finish complete all as specified and directed.
25Supply and fixing fan regulator electronic type suitable for 300 Watt (heavy duty) type 250 V, AC for ceiling fan complete all as specified and directed.
26M & L for sub main wiring with 2 run of 4 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20 mm dia PVC rigid non- metallic conduit after and including taking down / dismantling old sub main wiring including old conduit / casing capping / wooden batten etc of any description complete all as specified and as directed.
27M & L for sub main wiring with 2 run of 6 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20 mm dia PVC rigid non- metallic conduit after and including taking down / dismantling old sub main wiring including old conduit / casing capping / wooden batten etc of any description complete all as specified and as directed.
28S & F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
29S & F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
30S & F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
31S & F LED luminaire 300 mm x 300 mm, 18 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
32S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
33S & F round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
34S & F MCB, triple pole and neutral, 63 amps, 415 volts, ‘C’ curve, 10 KA complete all as specified and as directed.
35S & F MCB, Single pole and neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.
36S & F MCB, Single pole and neutral, 40 to 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.
37S & F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed.
38Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI earth lead wire 4.0 mm dia by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel, wire gauge. CI cover with frame etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 5 of MES Sch Part I, connected to Earthing test point and testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58637997
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 9.90 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Internal Wiring To Certain Otm/Tech Building At Af Stn Sonegaon.
Basic Detail
Tender No 8624/E8
Bidding Type Tender
Location
City Nagpur
State Maharashtra
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 18 Dec 2026
Finance
Tender Value 9.90 Lakhs
Tender Fee 500
EMD 19800
Exemption Available
Document List
74b02b48-3cb6-440e-99d0-480e45871943.html
BOQ_897198.xls
TD8624InternalWiring.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 26 days

Tender Documents

Download All (ZIP) ↓
html

74b02b48-3cb6-440e-99d0-480e45871943.html

xls

BOQ_897198.xls

pdf

TD8624InternalWiring.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender