Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58637824

Tender For Balance Work For Construction Of Govt. Degree College At Darhal Rajouri Phase-1

Issued by Government Departments · Rajouri, Jammu and Kashmir
Tender Value
1.94 Crore
Estimated cost
Bid Submission
26 Nov 2026
6 days left
EMD
3.89 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Balance Work For Construction Of Govt. Degree College At Darhal Rajouri Phase-1

BOQ

Name of Work:- Balance Work for Construction of Govt. Degree College at Darhal Rajouri Phase-1
Sl. No. Item Description
1Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed byEngineer-in-Charge.AKS 80% And OR 20%
2Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size)
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excludingthe cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
5Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leveL
7Centering and shuttering including strutting, propping etc. and removal of form for:
8Foundations, footings, bases of columns etc. for mass concrete.
9Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc
10Columns, pillars, piers, abutments, posts and struts
11Suspended floors, roofs, landings, balconies and access platforms.
1215mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 6 ( 1 cement : 6 fine sand)
136 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1415mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)
15Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete
16Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.Ssheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS:277 and consisting of angle cleats of size 25 mmwidex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to theangle hangers of 25x10x0.5mm of required length with nuts & bolts ofrequired size and other end of angle hanger fixed with G.I. channels45x15x0.9 mm running at the spacing of 1200 centre to centre, to whichthe ceiling section 0.5mm thick bottom wedge of 80mm with taperedflanges of 26 mm each having clips of 10.5 mm at 450mm centre tocentre, shall be fixed in a direction perpendicular to G.I. intermediatechannel with connecting clips made out of 2.64mm diaX230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5mm thick27mm high having flanges of 20mm and 30 mm long, the perimeter ofceiling fixed to wall/partition with the help of rawl plugs at 450 mm centreto centre, with 25mm long drive-all screws @ 230 mm interval ,includingfixing of gypsum board/calcium silicate board to ceiling section andperimetre channel with the help of dry wall screws of size 3.5x25mm at230mm c/c, including jointing and finishing to a flush finish of taperedand square edges of the gypsum board with recommended jointingcompound, jointing tapes, finishing with jointing compound in 3 layerscovering upto 150mm on both sides of joint and two coats of primersuitable for board, all as per manufacturers’ specification and alsoincluding the cost of making openings for light fittings, grills diffusers,cutouts made with frame of perimetre channels suitably fixed all completeas per drawing and specification and direction of the Engineer-in-Chargebut excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming toIS: 2095-Part 1 : 2011 (Board with BIS certification marks)
17Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm
18Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cementand matching pigments etc. complete.Size of tile 600x600 mm
19Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
20Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm or more (thickness to be specified by the manufacturer), of1st quality conforming to IS : 15622, of approved make, laid on 20 mmthick cement mortar 1:4 (1Cement : 4 Coarse sand), including groutingthe joints with white cement and matching pigments etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
21Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
22Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)
23Extra for providing opening of required size and shape for wash basin/ kitchen sink inkitchen platform, vanity counters and similar location in marble/granite / stone workincluding necessary holes for pillar taps etc. including moulding, rubbing and polishing ofcut edges etc. complete
24Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per designapproved by Engineer-in-Charge Granite Work
25Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): Second class teak wood
26Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size).
27Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws
28Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. 35mm Second class deodar wood
29Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : 35mm Second class deodar wood
30Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approvedsteel primer all complete Fixed to openings / wooden frames with rawl plugs screws etc.
31Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts andscrews etc. complete : 300x16 mm
32250x16 mm
33Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete. 250x10 mm
34100x10 mm
35Providing and fixing aluminum hanging floor door stopper, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparentor dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper
36Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete.125 mm
37100 mm
38Providing and fixing bright finished brass handles with screws etc. complete : 125 mm
39Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railingwith necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).
40Supply and installation of satin finish stainless steel AISI 304 Stainless steel posts having 100mm dia tube,erected with chemical grout to be fixed on the top of slab/skirting (Spigot fixed) at corners complete,as manufactured by Dline or approved equivalent and shall be fixed above the finished level complete as per architectural drawings.(NSI)
41Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chambered framewith in-built roller track and sash extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), appropriatedimension of uPVC extruded glazing beads and uPVC extruded interlocks,EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks withhook, zinc alloy body with single nylon rollers (weight bearing capacity to be40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drilling of holes for fixing hardware'sand drainage of water etc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weather proof silicon sealent overbacker rod of required size and of approved quality, all complete as perapproved drawing & direction of Engineer-in-Charge. (Single / double glasspanes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance indimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm andsingle glazing bead of appropriate dimension (Area of window upto1.75 sqm).
42Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
43Providing and fixing double action hydraulic floor spring of approvedbrand and manufacture IS : 6315 marked, having brand logo embossedon the body/plate with double spring mechanism and door weight upto125 kg for doors including cost of cutting floors, embedding in floors asrequired and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheetouter box with slide plate etc. complete as per the direction of Engineerin-plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness
44Providing and fixing ISI marked aluminum butt hinges ISI marked anodized(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade with necessary screws etc. complete
45Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : 150x10 mm
46Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete.125 mm
47Providing and fixing aluminum sliding door bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete :300x16 mm
48Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : 300x10 mm
49Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete. 100mm
50Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer
51Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 2mm thick
52Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface
53Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound) content less than 50 grams/ liter, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour.Two coats
54Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm)
55Applying priming coat:With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood)
56Painting with synthetic enamel paint of approved brand and manufactureto give an even shade Two or more coats on new work
57Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flushpipe (of approved make) \\"manually contro(led device(handle lever) conforming to IS:7231, with all fittings andfixtures complete, including cutting and making goodthe walls and floors wherever required Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. (MAKE:- JAGUAR, Essel, CERA, )
58Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid. (MAKE:- JAGUAR, Essel, CERA, )
59Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. (MAKE:- JAGUAR, Essel, CERA, )
60Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.Flat back wash basin of size 630x450 mm. (MAKE:- JAGUAR, Essel, CERA, )
61Providing & fixing of 32mm C.P Brass Waste Coupling for wash basin and sink, of approved quality.
62Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia
63Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre P.V.C white automatic flushing cistern of approved quality
64Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm
65Providing and fixing 100 mm CP grating for gully, floor or Nahani trap.
66Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm
67Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
68Providing and fixing toilet paper holder C.P. brass
69Providing and fixing PVC pipes of following dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent
70160 mm dia
71110 mm dia
7275mm dia
73Providing and fixing PVC bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:
74160 mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent
75100 mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent
7675 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent
77Providing and fixing PVC plain bend of required degree:
78160 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent
79100 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent
8075 mm dia. working pressure 6kg/cm2 of make Supreme, finolex or equivalent
81Providing and fixing single plain junction of required degree with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete
82100x100x100mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent
8375x75x75mm dia working pressure 6kg/cm2
84Providing and fixing single unequal junction of required degree with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100mm dia working pressure 6kg/cm2 of make Supreme, finolex or equivalent
85Providing and fixing single unequal plain junction of required degree working pressure 6kg/cm2 of make Supreme, finolex or equivalent
86Providing and fixing PVC offsets working pressure 6kg/cm2 of make Supreme, finolex or equivalent
8776 mm off sets. With 75 mm dia. Pipe
8876 mm off sets. With 100 mm dia. Pipe
89152 mm off sets. With 75 mm dia. Pipe
90152 mm off sets. With 100 mm dia. Pipe
91100mm PVC S&S working pressure 6kg/cm2 of make Supreme, finolex or equivalent
9275 mm PVC S&S working pressure 6kg/cm2 of make Supreme, finolex or equivalent
93Providing and fixing PVC collar:
94100mm working pressure 6kg/cm2 of make Supreme, finolex or equivalent
9575mm working pressure 6kg/cm2 of make Supreme, finolex or equivalent
96Providing PVC solution joints of diameter
97100mm
98Providing and fixing trap of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:
99100mm inlet and 100mm outlet working pressure 6kg/cm2 of make Supreme, finolex or equivalent
100100mm inlet and 75mm outlet working pressure 6kg/cm2 of make Supreme, finolex or equivalent
101Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) 1:4 ( 1 cement: 4 coarse sand)
102100mm dia.
10375mm dia
104Providing and fixing M.S. stays and clamps for PVC pipes of diameter.
105100mm dia.
106Providing and fixing Soap dish (C.P. brass) with bracket
107Providing and fixing towel ring (C.P. brass)
108Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:
10915 mm dia. nominal bore (medium)
11020 mm dia. nominal bore (medium)
11125 mm dia. nominal bore (medium)
112Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)
11325 mm dia. nominal bore
11440 mm dia. nominal bore
115Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
116Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 15mm nominal bore
117Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 20mm nominal bore
118Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore
119Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 32mm nominal bore
120Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 40mm nominal bore
121Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 40mm nominal bore
122Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore (MAKE:- JAGUAR, Essel, CERA, )
123Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore (MAKE:- JAGUAR, Essel, CERA, )
124Providing and fixing C.P. Jet with connection pipe (MAKE:- JAGUAR, Essel, CERA, )
125Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore (MAKE:- JAGUAR, Essel, CERA, )
126Providing and fixing C.P. brass close hole basin mixer centre hole of approved quality and make, weighing not less than 1.970 kg 15 mm nominal bore of standard back type. (MAKE:- JAGUAR, Essel, CERA, )
127Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore (MAKE:- JAGUAR, Essel, CERA, )
128Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
12915 mm nominal bore
13020 mm nominal bore
13125 mm nominal bore
13240 mm nominal bore
133Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support
134Providing and installation of electric water motor of Crumtum make having 01 H.P including all fitting complete.
135Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design
136Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
137Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations.a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mmheight including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approvedby Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 andapproved by Engineer-in-charge.d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibrecloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm
138Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
139Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
140Carriage of material from source to site of work by mechanical transport including loading /unloading and stacking complete.
141Sand for an average distance of 135 kms by M.T
142Stone aggregate below 40 mm for an average distance of 20kms by M.T Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58637824
AUTHORITY Government Departments
TENDER VALUE 1.94 Crore
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Balance Work For Construction Of Govt. Degree College At Darhal Rajouri Phase-1
Basic Detail
Tender No NIT No 67 of 2026 27 Dated 20 11 2026
Bidding Type Tender
Location
City Rajouri
State Jammu and Kashmir
Key Dates
Publish Date 20 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 1.94 Crore
Tender Fee 6000
EMD 3.89 Lakhs
Exemption Not Available
Document List
1c44cfc3-0cfc-4dbb-a628-e6e5aa8844fd.html
BOQ_1126437.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

1c44cfc3-0cfc-4dbb-a628-e6e5aa8844fd.html

xls

BOQ_1126437.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender