Drinking Water Supply and Sanitation Government Departments Closing in 13 days TDR #58637364

Tender For Construction Of 0.6 Mld Stp For Used Water Management In Belpahad Municipality, Odisha Including Operation And Maintenance For 10 Years

Issued by Government Departments · Jharsuguda, Odisha
Tender Value
7.71 Crore
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
7.71 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jharsuguda → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of 0.6 Mld Stp For Used Water Management In Belpahad Municipality, Odisha Including Operation And Maintenance For 10 Years

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 20-Nov-2026 DTCN Technical Bid 04-Dec-2026

BOQ

Name of Work:- Construction of 0.6 MLD STP for Used Water Management in Belpahad Municipality, Odisha including Operation and Maintenance for 10 years
Sl. No. Item Description
1Retaing wall with Storm water & Used Water Drain including Inlet Drain and Cross Wall
2Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
3Upto 1.5 m depth
41.5 m to 3.0 m
53.0 m to 4.5 m
64.5 m to 6.0 m
7Shoring and shuttering foundation trenches, pits etc. with close wooden planks or sheets shuttering etc. with labour cess as per specificaion and direction of the Engineer-in-Charge
8Supplying & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalities, taxes of all materials and cost of all labour with T&P sundries required for the work etc. complete (Measurement will be taken on findished compacted section) as per specification and direction of Engineer-in-Charge (at the bottom of the trench)
9P.C.C (1:3:6) with 4cm size HG Crusher broken metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C(below the base slab of the drain by referring cross-sectional drawing).
10Up to 1.5 m depth
11Below GL 1.5 m to 4.5 m
12Below GL 4.5 m to 7.5 m
13Rigid and smooth centering,shuttering for CC works including dismantling them after casting including cost of materials complete as per specification approved by the department & direction of Engineer-in-charge.
14Below up to 1.5 m from GL
15Beyond 1.5 m depth from GL
16Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in base slab, drain side walls and cover slab as per approved designs and drawings having a minimum compressive strength ( in work test) 25N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days excluding the cost of centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of Tor Steel(HYSD) and Binding wires and labour charges for straightening, cutting, bending etc. of Tor steel(HYSD) and binding wires and tying the grills and placing in proper position as directed by the Engineer-in-charge.
17Up to 1.5 m BGL/ Slab up to 4.3 m
181.5 m to 4.5 m BGL
194.5 m to 7.5 m BGL
20Cutting,Straightening coiled or bent up M.S HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S HYSD/TMT reinforcement bars and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S HYSD/TMT reinforcement bars consumed in the work only and as per specification and direction of Engineer-in-charge.
21Uto 1.5 m BGL/Slab up to 1.3 m
221st floor & BGL 1.5 m to 4.5 m
23Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting in base slab side walls and top slab upto 4.3 m height including cost of materials, labour, conveyance etc. all complete as per DTCN specification and direction of Engineer-in-charge.
24Up to 1.5 m BGL for RCC foundation and plinth
25Beyond 1.5 m BGL for RCC foundation and plinth
26flor slab up to 4.3 m
27for wall & fins
286mm thick Cement plaster (1:4) to R.C.C.surface finished smooth including closed deep chipping and slurry treatment curing etc. complete. as per the direction of Engineer-in-charge.
29Neat Cement punning to plastered surface with all cost conveyance etc. complete. as per the direction of Engineer-in-charge.
30Supply fitting and fixing of Cast Iron Penstok gate all complete as per DTCN specification and direction of Engineer-in-charge.
31Size: 1.2 x 0.75 m
32Size 0.90 x 0.6 m
33Dewatering: Pump with 5HP Diesel Engine (maximum up to 1200 HPhr)
34Supplying all labour T&P etc. for filling in foundation and plinth etc. with excavated materials including watering and ramming the bed complete as directed by the Engineer in Charge
35Pretreatment Unit
36Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
37Upto 1.5 m depth
38from 1.5 m to 3.0 m
39Shoring and shuttering foundation trenches, pits etc. with close wooden planks or sheets shuttering etc. with labour cess as per specification and direction of Engineer-in-charge.
40Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.
41P.C.C (1:3:6) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of Engineer-in-charge.
42P.C.C (1:2:4) with 12mm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of Engineer-in-charge.
43Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 25N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days excluding the cost of centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as directed by the Engineer-in-charge.
44Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.
45Base slab
46Structure
47Rigid and smooth centering and shuttering for RCC works including false works and dimentalling them after casting in floor and roof slabs, landings, balconies, projecting, sub-shades and chajjas upto 4.3 m height ground floor including cost of materials complete all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
48Up to 1.5 m BGL
49for slab up to 4.3 m
50for walls and fins
516mm thick Cement plaster (1:4) to R.C.C.surface finished smooth including closed deep chipping and slurry treatment curing etc. complete. as per the direction of Engineer-in-charge.slury treatment.
52Cement punning to RCC surfaces
53Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes DI/CI without cement mortar lining conforming to IS:8329 - 2000 of 400 mm diameter as per relevant IS code, specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) and terms & conditions of the DTCN and direction of Engineer-in-charge.
54400mm dia pipe
55Supplying all labour,T&P etc. for filling in foundation and plinth etc. with exavated materials including watering and ramming the bed complete as directed by the Engineer - in Charge.
56Pre-treatment Unit (Electrical & Mechanical) component
57SCREEN CHAMBER-ENTRY Gates all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
58Manual Coarse Screen (25mm spacing 10 mm bar) all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
59Aerated Lagoon
60Aerated Lagoon: Desludging and site clearance
61Desludging of slushy soil present in all respect and its denial of reuse as per the direction of Engineer-in-charge.
62Disposal of Desludged Slushy Soil all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
63Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge(at the bottom of the trench).
64Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
65Earthen Embankment:
66Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
67Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirementof table 300-2& Clause 305 of MoSRT &H (4th Revision) (Pg-157, Item no.35 of AOR) all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
68Spreading of moorum with well watered,rammed etc including all cost conveyance roalty ,labour and T&P etc. complete as directed by the Engineer - in Charge.
69Gass Turfing
70HDPE Lining & Precast slabs/Anchor Blocks
71Supply, fitting, fixing, HDPE lining of 1 mm thickness all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
72Precasted Structures with RCC M25 all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
73Reinforcement for Precasted Structures all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
74Rigid and smooth centering and shuttering for Precast structures all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
75Electrical & Mechanical Items: Surface aerators and yard lighting
76Supply, fitting, fixing, trial run and commissioning of aerators (2 HP surface floating aerators, 4 paddle wheel with integrated control panel) all complete as per terms and conditions, scope of work and specifications stipulated in the DTCN and as per direction of the Engineer-in-charge.
77Supply, fitting, fixing, trial run and commissioning of yeard lighting (including cables, light etc.) all complete as per terms and conditions, scope of work and specifications stipulated in the DTCN and as per direction of the Engineer-in-charge.
78Chlorine Contact Tank (with dozing pump arrangement):
79Earthwork in filling with approved material obtained from borrow pits with all lift and leads, transporting to site by mechanical means within a lead of 5 km., spreading, grading to required slope and compaction all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
80Shoring and shuttering foundation trenches, pits etc. with close wooden planks or sheets shuttering etc. with labour cess as per specification and direction of Engineer-in-charge.
81Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.
82P.C.C (1:3:6) with 4cm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C.
83P.C.C (1:2:4) with 12mm size HG Crusher BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C.
84Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 25N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days excluding the cost of centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as directed by the Engineer-in-charge.
85Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only.
86Rigid and smooth centering and shuttering for RCC works including false works and dimentalling them after casting in floor and roof slabs, landings, balconies, projecting, sub-shades and chajjas upto 4.3 m height ground floor including cost of materials complete all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
87for slab up to 4.3 m
88for walls
89Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes DI/CI without cement mortar lining conforming to IS:8329 - 2000 of 400 mm diameter as per relevant IS code specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
900.5 HP GEAR MOTOR with agitators arrangement in Mixing Tank with 15-20 RPM all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
91Pumping Station :
92Pumping Station (Civil including security guard room) :
93Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
94Up to 1.5m depth
951.5 m to 3.0 m
963.0 m to 4.5 m
974.5 m to 6.0 m
986.0 m to 7.5 m
99Supplying, & filling in foundation and plinth with good quality river sand / QUARRY STONE DUST including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.
100Cement concrete (1:3:6) using 4cm size hard granite crusher broken metal with all cost conveyance,royalty,taxes etc all complete as per specification and direction of Engineer-In-Charge
101Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as per specification and direction of Engineer-in-charge.
102upto 1.5m BGL
1031.5 m - 4.5 m BGL
1044.5 m - 7.5 m BGL
105Supplying,Cutting,Straightening coiled or bent up HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes, binding wires of 18 to 20 gauge and cost of all labour, T&P complete in all respect as per specification and direction of Engineer in charge.
106Providing and fixing Centering and shuttering including strutting, propping etc. and removal of form the site after completion of respective work including cost of materials complete all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
107Up to 1.5 m BGL
108> 1.5 m BGL
109Centering and shuttering for RCC lintel
110for slab up to 4.3 m
111for walls
112Centering at roof beam
113Wall and fin
114Brick work with Fly Ash bricks 25cm x 12cm x 8cm size having crushing strength not less then 100Kg/cm2 in cement mortar (1:6) in superstructure per cum icluding cost of all material, scaffolding & labour, as per specification and direction of Engineer-In-charge.
115Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to in side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
116Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
117Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. etc and as per specification and direction of Engineer-In-Charge.
118Supplying , fitting and fixing of MS Rolling shutter approved make as per sl No. 172 (c) (Shutter Frame Po-153, SoR-2022, Page No.79 complete with frame, shutters and all fitting and fixtures and as per specification and direction of Engineer-In-Charge. (each section height 0.075 m for 5m height of RS
11932mm. thick red oxide flooring under layers of 25mm. thick C.C. (1:2:4) with 12mm. size granite chips and top layer of 6mm. thick plaster cement red oxide mix using 3.5 Kgs. of red oxide per 50 Kgs. of cement 1:3 finished with a floating coat of cement red oxide mix of same proportion. all complete and as per specification and direction of Engineer-In-Charge.
120Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade including cost of paint as per specification and direction of Engineer-in-charge
121Painting with water proof weather coat of superior quality in two coats over a coat of primer with approved colour including cost and conveyance of all materials, scaffolding,leads, lifts, labour charges etc all complete for external and internal surface of Intake Well above ground level as per specification and direction of Engineer-In-Charge.
122Filling in foundation and plinth with excavated materials including watering and ramming as per specification and direction of Engineer-in-charge (1/3 rd of Excavated Material)
123Security Guard room of plinth area( 9x3 sqm) all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
124Pumping Station (Electrical and Mechanical):
125Design, supply , installation, commissioning and maintenance of non clog. Single stage, bottom suction submerisble pumping plants of 1450 rpm suitable fro handling raw sewage of specific gravity 1.03 driven by suitable H.P. of submersible electric motor suitable for operation at 415 +/-6 % volts, 3 phase, 50 c/s A.c. supply with following capacity and specification all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
126Control panel and starter
127Sluice valves:
128Supply, fitting, fixing of Cast Iron manually Gear operated double flanged machined and drilled with PN 1.0 rating, rising rising spindle type and conforming to relevant ISS all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
129150mm dia
130200 mm dia
131Supply, fitting, fixing of Cast Iron double flanged single door swing check valves having body comprising of inlet and outlet sheet in graded cast iron diaphragm fitted with stainless steel CF 8M, and conforming to relevant ISS all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
132150mm dia
133200 mm dia
134Supply, fitting, fixing of Delivery piping shall commence from 90⁰discharge duck foot bend outlet of indivisual pump up to th start of rising main, including common hyder and bypass arrangement and shall comprise of the following. The length of pipe shall be as per site requirement all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
135D/F Taper (2 Nos) 150mm to 200 mm
136D/F 90 degree bend (2 Nos) 150mm
137D/F pipe 150 mm
138A/F Tee (2 Nos) 200x200x200 mm
139D/F 90 degree bend (2 Nos) 200 mm
140D/F pipe 200 mm
141150mm dia double-flanged Dismantling Joints
142200 mm dia double-flanged Dismantling Joints
143Nuts & Bolts
144Supply, fitting, fixing of Monorail with chain pulley Block: One number single I-section of 1.00 ton capacity with chain pulley block with 20 m lift, to be installed on the I - section which shall be supported on concrete beams and wall complete in all respect.
145Supply, fitting, fixing of Ultrasonic Level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be in feet/meter with low level and high level indications all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
146Supply, fitting, fixing of Automatic operation control relays for operation of panel
147Supply, fitting, fixing of 150 mm dia dial pressure gauge with copper tubing and stop cock along with necessary fitting including 1 no. depth gauge
148Power control cable : Supply, fitting, fixing of the various type and size of cables required from L.T.panel to starter to various motors and grives apprx. Length 25 M with each pump.70 sq. mm, Core - 3 A2XY all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
149Earthing: Complete earthing of all the equipement as per detailed above shall be done as per IER specification with G.I plates watering pipe with adequate size of AI/GI strip all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
150Tools and spanners all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
151Installation of all equipment etc. all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
152Commission of Pumping Station all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
153Testing of Pumping Plant all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
154Painting of all equipment and drives etc. all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
155Electrification of pump house, generator and panel room, component, Internal: Supply and fitting of concealed internal wiring suitable for Tueb Light, fan, exhaust, plug , light, etc in LT control panel DG room, H.T. control panel, toilet, office and transformer all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
156Flow measuring device: Electromagnetic type comprising sensor and remote microprocessor based transmitor/inventor unit having no moving part and suitable on operation 85-265 volts 50 Hz AC supply size DN 400 all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
157Approach Road
158Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
159Supplying, & filling in foundation and plinth with good quality river sand / QUARRY STONE DUST including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.
160Cement concrete (1:3:6) using 4cm size hard granite crusher broken metal with all cost conveyance,royalty,taxes etc all complete as per specification and direction of Engineer-In-Charge
161Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as per specification and direction of Engineer-in-charge.
162Barbed wire fencing
163Supplying fitting and fixing RCC (1:2:4) fencing posts with chips 1.68 m long 13cmx 13cm at bottom and 8cmx 8cm at top and 30cm x 30cm x8cm base finished smooth all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
164Supply of Barbed wire including cost of conveyance, stacking, watch and ward etc. all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
165Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with GI wire and including cost of staples, hooks and tying wires all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
166Loading Platform alongwith MS loading arrangement to tanker for loading of treated used water for watering of garden by ULB
167Earth work in excavation in all kind of soil (Ordinary, hard,stoney earth, slushy) for all leads and lifts including Supplying all labour, T&P including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m min. depth as per specification/drawing approved by the department, baricadding, watch & ward, lighting, bailing out water etc.all complete as per approved design & drawing, IS/PH Specification, technical Specification, DTCN and direction of Engineer-in-charge
168Supplying, & filling in foundation and plinth with good quality river sand / QUARRY STONE DUST including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge.
169Cement concrete (1:3:6) using 4cm size hard granite crusher broken metal with all cost conveyance,royalty,taxes etc all complete as per specification and direction of Engineer-In-Charge
170Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position as per specification and direction of Engineer-in-charge.
171Supplying and fixing of 100mm dia MS/GI pipe including fittings both for Horinzontal and vertical alignment with vertical MS angle frame support anchroed with RCC foundation as per approved drawing and direction of Engineer in charge all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
172Supplying fitting fixing of of 2 HP Clear water Pump motor including Suitable starter and Cables for treated water pumping to loading tankers all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge.
173Operation and maintenance of the project work for 0.6 MLD STP & allied structures for 10 years including the cost of maintenance of civil, electrical, mechanical, instrumentation, cost of manpower, POL, chemicals, consumables and spares etc. (but excluding the cost of energy) all complete as per terms & conditions, scope of work and specification stipulated in the DTCN as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58637364
AUTHORITY Government Departments
TENDER VALUE 7.71 Crore
LAST DATE 04-12-2026
Authority
Authority Name Orissa Water Supply And Sewerage Board
Work Description Tender for Construction Of 0.6 Mld Stp For Used Water Management In Belpahad Municipality, Odisha Including Operation And Maintenance For 10 Years
Basic Detail
Tender No 07/OWSSB/2026-27
Bidding Type Tender
Location
City Jharsuguda
State Odisha
Key Dates
Publish Date 20 Nov 2026
Submission Date 04 Dec 2026
Open Date 01 Jan 0001
Finance
Tender Value 7.71 Crore
Tender Fee 10000
EMD 7.71 Lakhs
Exemption Available
Document List
bd70cc91-c455-4a5c-af74-4bee8f48ce8f.html
BOQ_622668.xls
DTCNBel.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 13 days
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

bd70cc91-c455-4a5c-af74-4bee8f48ce8f.html

xls

BOQ_622668.xls

pdf

DTCNBel.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender