Defence Statutory Bodies & Commissions/Committees Closing in 30 days TDR #58635371

Tender For Special Repair To P-3 (Latif) Faculties Of Trainees At Ats Belagavi

Issued by Statutory Bodies & Commissions/Committees · Belagavi, Karnataka
Tender Value
2.30 Crore
Estimated cost
Bid Submission
21 Dec 2026
30 days left
EMD
3.06 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To P-3 (Latif) Faculties Of Trainees At Ats Belagavi

BOQ

Name of Work:- SPECIAL REPAIR TO P-3 (LATIF) FACULTIES OF TRAINEES AT ATS BELAGAVI
Sl. No. Item Description
1BoQ SERIAL PAGE NO:- BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CHIEF ENGINEER (AF) BANGALORE Name of Work : SPECIAL REPAIR TO P-3 (LATIF) FACULTIES OF TRAINEES AT ATS BELAGAVI Contract No: CE AF/BAN/ of 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES
2SCHEDULE 'A' PART - I (B/R Portion) Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) and removing unserviceable tiles to Store and Rubbish off the permisble, complete all as specified and as directed.
3Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and as directed.
4Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:4 complete all as specified and as directed.
5Material and labour for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over cement screed 15 mm thick 1:4 complete all as specified and as directed.
6Material and labour for Non - skid colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical dado tiling complete all as specified and as directed.
7Material and labour for coloured glazed ceramic tiles in vertical surface 300 x 600 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing with cm 1:4 complete all as specified and as directed.
8Material and labour for Sadarahalli stone slab flooring 20-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over complete all as specified and as directed. NOTE: Screed bed shall be measured and paid separately.
9Material and labour for 20mm screed bed in cement mortar 1:4, complete all as specified and as directed.
10Material and labour for virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as specified including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr in Charge.
11Material and labour for virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical dado tiling complete all as specified and as directed.
12Taking down cement plaster on brick/concrete/stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish off the premises, complete all as specified and as directed.
13Material and labour for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement, complete all as specified and as directed.
14Material and labour for rendering 15mm thick on fair faces of Brick masonry in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.
15Material and labour for rendering 5mm thick on fair faces of brick work or concrete surfaces of wall or ceiling in CM 1:3 finishing even and smooth without using extra cement. (Using Dimapur sand), complete all as specified and as directed.
16Supply only water proofing compound, complete all as specified and as directed.
17Material and labour for preperation of newly plastered surfaces and applying two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices, etc., including applying 3mm thk wall care putty over new surface complete all as specified and as directed.
18Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.
19Material and labour for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing all as specified and as directed.
20Material and labour for preparation of old painted wall surfaces and applying two coat of Acrylic distemper complete all as specified and as directed.
21Material and labour for Complete removal of existing treatment and necessary preparation of surfaces and applying two coats of100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance, exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed.
22Material and labour for two coat of white wash on old decorated surfaces of ceilings including necessary preparation of surfaces complete all as specified and as directed.
23Taking down and removing Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame, complete all as specified and as directed.
24Supply and fixing Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
25Material and labour for provding cement concrete 1:3:6 type C0 using 12.5mm graded stone agg as in frame filling complete all as specified and as directed.
26Material and labour for 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
27Supply and fix 100 mm long butt hinges medium weight cold rolled to door frame with necessary screwing or bolting complete all as specified and as directed.
28Supply and fix 200 mm long aluminium anodised handle fabricated type, complete all as specified and as directed.
29Supply and fix 200 mm long aluminium anodised barrel tower bolt, complete all as specified and as directed.
30Material and labour for 250 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type, complete all as specified and as directed.
31Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and as directed.
32Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and as directed.
33Supply and fix Anodised aluminium grills powder coated of approved design/pattern, with approved standard section and fixed to the window frame with CP brass / stainless steel screws @200mm centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.
34Taking down and removing Chowkhats or frames n exc 1.5 sq. but with shutters (without taking off shutters from the frame complete all as specified and as directed.
35Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and complete all as specified and as directed. of Engineer-in-charge
36Supply and fixing factory made uPVC any other colour as directed by GE Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, complete all as specified and as directed.
37Supply and fix Aluminium (Die cast section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
38Supply and fixing factory made uPVC any other colour as directed by GE Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, complete all as specified and as directed.
39Supply and fix sheet plain glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and as directed.
40Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and as directed.
41Supply and fix in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.
42Supply and fixing factory made uPVC any other colour as directed by GE fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, complete all as specified and as directed.
43Material and labour for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide of any description, over 10cm in width or girth,not otherwise described complete all as specified and as directed.
44Supply & fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified and as directed.
45Material and labour for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
46Supply and fix in repair vitreous china European type wash down water closet pan (pedestal pattern) of white colour including plastic water closet seat black closed parttern with flat bottom (with MS or CP hinging device ) and fixing bolts ,'' P '' and \\" S '' trap necessary inlet and outlet connection and pvc flush pipe 32mm dia complete all as specified and as directed.
47Supply and fix in repairs light coloured vitreous china WHB white oval shape of 550mmx400mm (minimun) on new brackets excluding taps, waste china & plug including bracket and coupling brass etc complete all as specified and as directed.
48Supply and fix in repairs Pillar taps, 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
49Supply and fix in repair 10 ltrs capacity high or low level flushing cistern PVC of selected white valveless syphonoic action type inlet ball valve float and handle 10 ltrs discharge capacity complete including PVC connection and brackets complete all as specified and as directed.
50Supply & fix in repairs Health faucet ABS body mild steel cromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
51Supply and fix in repair water closet (Squating pattern) of vitreous china squatting pan of \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connection to trap and flushing pipe and anti syphon pipe etc complete incl trap set in and incl concrete bedding complete all as specified and as directed.
52Supply & fix in repairs 15mm dia bore Bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe complete all as specified and as directed.
53Supply and fix 15mm Stop valves, but fancy type, chromium plated , screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or forunions and fixed complete all as specified and as directed.
54Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
55Supply & fix in repairs Virtreous china urinal full stall type with grating and union for discharge pipe, fixing plug and waste pipe bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar all as specified and directed
56Supply & fix Urinal spreader fixing with 15mm dia pipe, chromium plated complete all as specified and as directed.
57Supply & fix in repair PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
58Supply & fix in repair PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints,fixed to walls including clamps complete all as specified and as directed.
59Supply & fix 75 mm dia bore PVC (SWR) bend with accessible door of any radius complete all as specified and as directed.
60Supply & fix 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with accessible door of any radius complete all as specified and as directed.
61Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
62Supply & fix in repair PVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
63Supply & fix in repair PVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints,fixed to walls including clamps complete all as specified and as directed.
64Supply & fix 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with accessible door of any radius complete all as specified and as directed.
65Material and labour for Traps ‘P’ or ‘S’ of bore 100mm fixed to commode complete all as specified and as directed.
66Material and labour for PVC (SWR) vent cowl of bore 110mm fixed to pipe complete all as specified and as directed.
67Taking up or down 15 mm bore PPR/GI tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and as directed.
68Supplying and laying of 15 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.
69Taking up or down 20 mm bore PPR/GI tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and as directed.
70Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.
71Supply & fix mirror of selected quality glass, seamless glass mounted on 6 mm thick AC building board or commercial plywood fixed on wall Min 4 screw top and bottom as per directed Engr-in-charge complete all as specified and as directed
72Dismantling water tanks and removing to store of capacity exc. 500 & n exc. 1000 ltrs complete all as specified and as directed.
73Supply and fix water storage tank ISI marked of capacity 1000 ltrs hoisted and fixed in position including ball brass valves of 25mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube etc complete all as specified and as directed.
74Supply and fix 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
75Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
76Material and labour for providing and laying cement concrete, 75mm thick, (1:3:6), type C-1, (using 20mm nominal size crushed and graded stone aggregate) for plinth protection including filling of expansion joint with bituminous mixture finished even and smooth without using extra cement complete all as specified and as directed.
77Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with Grade 'A' sealing compound, complete all as specified and as directed.
78Supply and fix in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and as directed.
79Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
80Supply and fix Pre-Painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
81Supply and fix Pre-Painted galvantume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
82Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
83Material and labour for Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
84Material and labour for Formwork for rough finish concrete surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
85Material and labour for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
86Material and labour for cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.
87Supply and fix sheet plain glass 5.5 mm thick, ordinary quality, in squares exceeding 0.5 Square Metre for each pane, glazing with oil putty or aluminium beading complete all as specified and as directed.
88Removing building materials etc. other Earthwork) to a distance of 2Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.
89ROAD/Path/Culvert Material and labour for earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, For all kind of soil as complete all as specified and as directed by Engineer-in charge.
90Material and labour for rolling and consolidating formation surfaces with 8-12 ton power roller including filling in soft spots , hollows and depressions etc which occurs during rolling to required level gradient and camber etc including watering as necessary during rolling complete all as specified and as directed.
91Material and labour for laying and compacting 100 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade V as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013, complete all as specified and as directed.
92Material and labor for laying and compacting 100 mm thick (compacted thickness ) WMM in two layers of 50 mm each.Wet Mix Macadam (WMM) grading as pe table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013, complete all as specified and as directed.
93Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.
94Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
95SEWAGE DISPOSAL Material and labour for earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) in any type of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, complete all as specified and as directed.
96Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.
97Material and labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and as directed.
98Material and labour for 150mm reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and as directed.
99Material and labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 for 150 mm dia pipe complete all as specified and as directed by Engneer-in-Charge.
100Material and labour for PCC 1:2:4 type B1 (20mm graded stone aggregate) concrete as in coping, complete all as specified and as directed.
101Material and labour for pre cast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab set in cement mortar 1:4, complete all as specified and as directed. NOTE: Reinforcement shall be measured and paid separately.
102Material and labour for round bars 10mm and above as in slabs cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
103Returning, filling in, including spreading levelling and well ramming of soil in layers not exc 25 cm in hard /dense soil, complete all as specified and as directed.
104Material and labour for extra for forming fair finished drain or channel 30cm inner girth on cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.
105Material and labour for internal dia 150mm Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.
106Material and labour for 300mm reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and as directed.
107Material and labour for internal dia 300mm Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.
108Material and labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 for 300 mm dia pipe complete all as specified and as directed by Engneer-in-Charge.
109AREA DRAINAGE Material and labour for excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. or for shafts, wells, cesspitsmanholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in hard dense soil, complete all as specified and as directed.
110Demolition stone/ brick masonry, built in cement mortar or cenent lime mortar including all quoins, arches, pillars, etc, complete all as specified and as directed.
111Material and labour for Cement Concrete 1:3:6 type B1 (20mm graded stone aggregate) as in surface channel and drain complete all as specified and as directed.
112Material and labour for extra for forming fair finished drain or channel 45cm inner girth on cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.
113Supply and fix framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,orforged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165, complete all as specified and as directed.
114Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
115Material and labour for TMT bars 6mm dia to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
116FENCING Dismantling posts or struts ( steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directed.
117Material and labour for PCC (1:3:6) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
118Material and labour for Mild steel work in fencing posts incl cutting top to shape, drilling holes for wire steel flat iron including necessary driling hole bolting or reveting etc flat iron fillets ( for securing wiremesh ) incl all bolting or riveting etc and similar works conforming to Fe490 gde E165, complete all as specified and as directed.
119Material and labour for mild steel screw (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long of 10 mm dia bolt, complete all as specified and as directed.
120Supply and Fixing PVC coated (PVC coating as per ASTM F668 class 2a nominal 0.5 mm and Min 0.4 mm) chain link fencing of mesh 50 x 50 mm including line wires of dia 2.50mm with tensile strength & mass of zinc coating min 350 MPa as per IS 280, to any type of standards, rails, straining bolts, etc including provission of binding wires, complete all as specified and as directed.
121Material and labour for preparation of new steel surfaces of any discription not exceeding 10 cm width and girth when uncompleted with other painting and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
122SCHEDULE 'A' PART-II INTERNAL ELCTRIFICATION Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.
123Taking down carefully unserviceable main switches/DB's/Metal socket off size including MCBs from their position and removing materials from site all as specified and as directed by Engr-in-Charge.
124Supply and fix galvanised iron pipes 40 mm dia, light grade with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and as directed.
125Supply and fix Double wall corrugated HDPE Pipe IS-16205, outer dia 40 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed.
126Material and labour for Point wiring with stranded FRLSH copper conductor cable for one light point controlled by one, one way switch 5 Amp 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module cover of approved make, including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.
127Material and labour for Point wiring with stranded FRLSH copper conductor cable for one socket point on the same board with other switches 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.
128Material and labour for Point wiring with stranded FRLSH copper conductor cable for one socket point on indpendent board 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.
129Material and labour for Point wiring with stranded FRLSH copper conductor cable for one bell point controlled by one, one way switch 5 Amp 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.
130All as per item No 127 above but for one 3 pin socket outlet 15 Amps independent with cable 4 sq mm size, complete all as specified and as directed by Engineer-in-Charge.
131Supply and fix switch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. Make : (i) 800100 of Indoasian ELVIRA make(ii) ACWSXXW101 of Havells CRABTREE(Signia) make or any equivalent make approved by GE.
132Supply and fix switch Modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply complete all as specified and as directed. Make : (i) 800105 of Indoasian ELVIRA make(ii) ACWSXIW161 of Havells CRABTREE(Signia) make or any equivalent make approved by GE.
133Supply and fix Modular type socket 6 A AC 230V, 50HZ complete all as specified and as directed.Make : (i) 802800 of Indoasian ELVIRA make(ii) ACWKPXW063 of Havells CRABTREE(Signia) make or any equivalent make approved by GE.
134Supply and fix Modular type switch socket combine 6A/16A multi purpose AC 230CV, 50HzMake : (i) 800122 of Indoisian ELVIRA make(ii) ACWKCXW163 of Havells CRABTREE(Signia) make or any equivalent make approved by GE.
135Material and labour for ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed.
136Supply and fix Modular Fan step regulator, 120W - 2 module complete all as specified and as directed.Make : (i) 800139 of Indoasian ELVIRA make(ii) ACWRFHW008 of Havells CRABTREE(Signia) make or any equivalent make approved by GE.
137Supply and fix LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed.Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havells make or equivalent make of Bajaj/Philips/Wipro/Crompton
138Supply and fix LED lights fitting 1x 10W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed.Cat Part No: LUMILINE+BS10WLED865SPCSS of Havells make or equivalent make of Bajaj/Philips/Wipro/Crompton
139Supply and fix ENDURA SUN DOWN energy saving and environmental friendly long life LED street light made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 LED street light of 35 Watt all as per Havells Cat Part No - ENDURASUNDOWNSL35WLED765PASYBOPC of Havells make or equivalent make of Bajaj/Philips/Wipro with sutable size bracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and as directed.
140Material and labour for submain wiring using 4 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 6 runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including PVC concealed conduit of dia not less than 32 mm dia with standard acessories, along with four run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 1x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-6 runs of single core FRLS PVC cable 10sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit),complete all as specified and as directed. (Make of cables: Nicco, L&T, Paragon, havells or equivalent approved by GE)
141Supply and fix in replacement sub main wiring in PVC concealed conduit min 25 mm dia with 2 single core 06 sqmm FRLSH multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVC concealed conduit all as specified and as directed by Engineer-in-Charge.(Note two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM) (Make of cables: Nicco, L&T, Paragon, havells or equivalent approved by GE)
142Supply and fix sheet metal enclosure Double Door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed.
143Supply and fix sheet metal enclosure Double Door factory made distribution board 240 volts SPN 12 way, 200 Amps rated bus bar complete all as specified and as directed.
144Supply and fix sheet metal enclosure Double Door factory made distribution board 415 volts TPN 4 way, 200 Amps rated bus bar complete all as specified and as directed.
145Supply and fix sheet metal enclosure Double Door factory made distribution board 415 voltsVTPN 8 way, 250 Amps rated bus bar complete all as specified and as directed.
146Material and labour for MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and as directed.
147Material and labour for MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and as directed.
148Material and labour for MCB TPN / FP 63 Amps, C Curve, 415 volts, 50 Hz AC supply complete all as specified and as directed.
149Material and labour for MCCB 3POLE 350 Amps,36 KA, 415VOLT, 50 Hz AC supply. Adjustable type breaking cap 36 KA, complete all as specified and as directed.
150Material and labour for MCCB 3POLE 160 Amps, 36 KA, 415VOLT, 50 Hz AC. Supply adjustable type breaking cap 36 KA, complete all as specified and as directed.
151Material and labour for taking down ceilng fan/EX fan, dismantling blades, Painting of ceiling fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of 0.5 Sqmm 3 core cable from ceiling rose to connector of fan, complete all as specified and as directed.
152Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air complete all as specified and as directed.
153Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 04 mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and including flatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed by Engineer-in-Charge. (Notes 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner), complete all as specified and as directed.
154Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
155Supply and fix in replacement Bell Ding dong AC single pole 230volts, complete all as specified and as directed.
156Supply and fix in replacement Modular Bell push 6A 1 module type single pole 5Amps, complete all as specified and as directed.
157Material and labour Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp including taking out the unserviceable plug and socket.complete all as specified and as directed.
158Material and labour for providing, laying and fixing rigid non-metallic PVC conduit of 32 mm dia in position complete with all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, etc., exclusive of junction/terminal boxes; including cutting chases in brickwork or concrete for concealed conduit wiring or concealed water tubing, pinning in, making good to facings where required, and pointing to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., in cement mortar 1:3, complete, for chases not exceeding 10 cm girth.complete all as specified and as directed.
159Material and labour for providing, laying and fixing rigid non-metallic PVC conduit of 25 mm dia in position complete with all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, etc., exclusive of junction/terminal boxes; including cutting chases in brickwork or concrete for concealed conduit wiring or concealed water tubing, pinning in, making good to facings where required, and pointing to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., in cement mortar 1:3, for chases not exceeding 10 cm girth complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58635371
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 2.30 Crore
LAST DATE 21-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To P-3 (Latif) Faculties Of Trainees At Ats Belagavi
Basic Detail
Tender No 801731/AF/E8
Bidding Type Tender
Location
City Belagavi
State Karnataka
Key Dates
Publish Date 20 Nov 2026
Submission Date 21 Dec 2026
Open Date 28 Dec 2026
Finance
Tender Value 2.30 Crore
Tender Fee 2000
EMD 3.06 Lakhs
Exemption Available
Document List
4c99727a-0614-40a2-8f3c-2447da673205.html
801731FINALUPLOAD.pdf
BOQ_897134.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 30 days
Dec 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 37 days

Tender Documents

Download All (ZIP) ↓
html

4c99727a-0614-40a2-8f3c-2447da673205.html

pdf

801731FINALUPLOAD.pdf

xls

BOQ_897134.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender