Tender For Replacement Of Old Ci Sleepers With Psc Sleepers Of Railway Siding At Fsd Bellary And Other Miscellaneous Works For The Year 2026-27
Tender Value
34.28 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
68600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballari → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Ci Sleepers With Psc Sleepers Of Railway Siding At Fsd Bellary And Other Miscellaneous Works For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and stacking neatly stone ballast of 50mm for track in private siding along the track in private siding of FCI confirming to par 9.0 to 9.8 of technical specifications. |
| 2 | Supplying and fixing of wooden platform clearance blocks of size 200 X 150 mm and 0.8m to 1.0 m length at regular intervals along the railway track in between rail and varndah platform as per railway specifications at site |
| 3 | Spreading of available stone ballast of 50mm in dumping manure neatly over the track etc., complete as per directions of Engineer-in-charge. |
| 4 | Supplying released pre-stressed concrete track sleepers to suit broad-guage with all necessary fittings generally conforming to railway standard and specification at site. |
| 5 | Fixing of released pre-stressed concrete sleepers/ wooden sleepers as per railway standards and specifications to broad guage railway track and Points & Crossings including opening of the track and removal of the damaged sleepers/ steel sleepers and stacking at site as directed. The rate shall include the cost of packing and forming the ballast formation but exclude the cost of PSC sleepers fittings shall be supplied by departmentally. |
| 6 | Deep screening of the entire existing stone ballast to a depth of 250mm below bottom of PSC sleepers up to the formation level duly following the procedure as given in Para 238(2), e, f of IR PWM para 6.3 of LMR manual / under traffic condition and packing the entire muck away to make up / under cess in screening and re fixing the screened clean ballast back into track including lifting the track to the proposed L section to get a minimum cushion of 250mm below the bottom of PSC sleepers including lifting of track to the required level, aligning, leveling and grading the track to approved longitudinal and traverse profile attending one round of packing as directed by EIC to facilitate allowing train @ 20 KMPH. |
| 7 | Supplying of PSC sleeper fittings composite grooved rubber sole plates (CGRSP) 6.2mm thick with horns for 52 Kg. PSC sleepers |
| 8 | Supplying of PSC sleeper fittings Metal liners for use with ERC Mark-III with flat toe on 52 Kg PSC sleepers with 52 Kg rails |
| 9 | Supplying of PSC sleeper fittings Elastic rail clips MK-III with flat toe 60kg UIC/52kg rails (Pendrol clips). |
| 10 | Salvage value for released / removed damaged check rails |
| 11 | Systemic overhauling of track under traffic as per procedure prescribed in latest edition of IRPWM , including removing the crib ballast in 50mm to 75mm depth below bottom of sleeper and complete shoulder ballast without breaking core under the bottom of sleeper, to recover clean ballast by screening on wire mesh and disposing off the muck including throwing & leveling, if required beyond minimum 5m from the edge of cutting which are up to 3m deep or alternatively carting it up to 50m for disposing it off beyond cutting or platforms away from the track, as directed by Engineer in-charge including cutting & making up the cess and ensuring proper drainage slope and then re-inserting cleaned ballast into track and compaction of shoulder and crib ballast by wooden mallet and dressing / profiling ballast as per railway specifications.For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more |
| 12 | First or Second Through Packing of track of all sleeper density including giving a general lift, as desired to eliminate sag after Deep Screening work, lifting of track, lowering of track and major realignment of curves and formation rehabilitation as per procedure prescribed in latest edition of IRPWM. Note: General lift is normally 25 mm and isolated lift may be up to 50 mm. For PSC Sleeper Track with Sleeper Density of 1540 |
| 13 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender