Tender For Rewinding And Repairs To Submersible Openwell, Monoblock Motors And Openwell Motors At Ward No. 07 To 12 In Palladam Municipality
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rewinding And Repairs To Submersible Openwell, Monoblock Motors And Openwell Motors At Ward No. 07 To 12 In Palladam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding charges for the following wet type submersible / Openwell/ Monoblock motors using suitable gauge PVC insulated electrolyte copper wire of suitable no. of turns including deduct the cost of scrap of old removing winding coil etc complete |
| 2 | 5 H.P. |
| 3 | 7.5 H.P. |
| 4 | 10 H.P |
| 5 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 6 | 10 H.P SubmersibleMotor/Openwell/ Monoblock |
| 7 | Bush Set |
| 8 | Housing Bush |
| 9 | Bearing Set |
| 10 | Soft sealing |
| 11 | Oil Sleeve |
| 12 | Thrust Bearing |
| 13 | Pump service - Submersible Motor/Openwell/Monoblock |
| 14 | Gun metal Bush |
| 15 | Bearing Set |
| 16 | Soft Sleeve |
| 17 | Pump Soft |
| 18 | Pump Sleeve |
| 19 | Impeller |
| 20 | Thrust bearing |
| 21 | Oil Sleeve |
| 22 | SS sleeve |
| 23 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 24 | 7.5 H.P SubmersibleMotor/Openwell/Monoblock |
| 25 | Bush Set |
| 26 | Housing Bush |
| 27 | Bearing Set |
| 28 | Oil seal |
| 29 | Soft sealing |
| 30 | Thrust Bearing |
| 31 | Pump service - Submersible Motor/Openwell |
| 32 | Gun metal Bush |
| 33 | Bearing Set |
| 34 | Soft Sleeve |
| 35 | Pump Soft |
| 36 | Pump Sleeve |
| 37 | Impeller |
| 38 | Oil Sleeve |
| 39 | Thrustbearing |
| 40 | SS sleeve |
| 41 | Supply and Replacing of following worn out parts in the wet type submersible motors /Open well/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 42 | 5 H.P SubmersibleMotor/Openwell/ Monoblock |
| 43 | Bush Set |
| 44 | Housing Bush |
| 45 | Bearing Set |
| 46 | Soft sealing |
| 47 | Oil Sleeve |
| 48 | Thrust Bearing |
| 49 | Pump service - Submersible Motor/Openwell/ Monoblock |
| 50 | Gun metal Bush |
| 51 | Bearing Set |
| 52 | Soft Sleeve |
| 53 | Pump Soft |
| 54 | Pump Sleeve |
| 55 | Impeller |
| 56 | Thrust bearing |
| 57 | Oil Sleeve |
| 58 | SS sleeve |
| 59 | Supply and deliver of following panel board parts newly to replace the worn out parts including deduct the old materials cost which were replaced |
| 60 | Preventor |
| 61 | Voltmeter/Ammeter |
| 62 | Indicator lamps |
| 63 | Bush button |
| 64 | Ammeter selector. |
| 65 | Conductor |
| 66 | Terminal |
| 67 | Overload relay |
| 68 | Capacitor |
| 69 | Labour charges - Submersible Motor/Openwell |
| 70 | Labour charges for Removal of submersible pumpsets and its accessories from open well/ Borewell for attending repair works and Re-erection of submersible pumpsets and its accessoriel from open well/Borewell after attending the repairs, including fixing and jointing of submersible cable with clamps etc complete |
| 71 | Conveyance of power pumpset (centrifugual, jet and submersible) and its acessories from site of works to workshop for attending repair works, and then to work site Conveyance upto 10kms |
| 72 | Supply and replacing of following water supply materials including deduct old materials |
| 73 | 50mm dia G.I., pipe B class (Medium) |
| 74 | 40mm dia G.I., pipe B class (Medium) |
| 75 | 50 mm Coupling (GI) |
| 76 | 40mm Coupling (GI) |
| 77 | 50mm GI Union |
| 78 | 40mm Union |
| 79 | 2\\" Gate valve |
| 80 | 1 1/2\\" gun metal valve |
| 81 | 50 mm GI Elbow |
| 82 | 75mm dia HDPE pipe PN10 |
| 83 | 50 mm G.M. Non Return valves |
| 84 | 75 mm PVC Footvalve |
| 85 | 75 mm Hose collar |
| 86 | 75 mm Hose clip |
| 87 | 75 mm Hose connector |
| 88 | 80 mm G.M. Gate valve |
| 89 | 50 mm G.M. Gate valve |
| 90 | 63mm dia HDPE pipe PN10 |
| 91 | Nylon Rope |
| 92 | 65mm UPVC Pipe (Un-Plasticized Polyvinyl Chloride) |
| 93 | 80mm UPVC Pipe (Un-Plasticized Polyvinyl Chloride) |
| 94 | cables |
| 95 | 2.50 sq mm submersible cables |
| 96 | 4.00 sq mm submersible cables |
| 97 | Supply and Replacing of following wornout Elecrtical meterials with new one including cost of materials and labour including deduct the old material cost |
| 98 | 7/20 Copper wire |
| 99 | 32 Amps Porcelain Fuse Unit (500V) |
| 100 | 63 Amps Porcelain Fuse Unit (500V) |
| 101 | 100Amps Porcelain Fuse Unit (500V) |
| 102 | 16A main switch |
| 103 | 63A MCB DP |
| 104 | 63A MCB FP |
| 105 | No Volt Coil |
| 106 | On / Off Switch |
| 107 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender