Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58633256

Tender For Special Repair/ Replacement Of Dg Set, Radiator, Fire Fighting Equipment, Fire Alarm Systems, Fire Extinguisher And Allied Works At Alg Tawang Under Ge 859 Ews

Issued by Statutory Bodies & Commissions/Committees · Tawang, Arunachal Pradesh
Tender Value
42.71 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tawang → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair/ Replacement Of Dg Set, Radiator, Fire Fighting Equipment, Fire Alarm Systems, Fire Extinguisher And Allied Works At Alg Tawang Under Ge 859 Ews

BOQ

Name of Work:-
Sl. No. Item Description
1Repair and Servicing of Diesel Engine 400 KVA Make: Kirloskar,Engine directly coupled with alternator of 400 KVA capacity, draining out the existing engine oil from the bottom of the oil sump and replacement and top up of New E/oil,oil filter,fuel filter,Air filter,Air cleaner safety element,Air Cleaner primery Element,Fuel filter and water filter .Taking down old unserviceable leakage radioator from DG Set and replace by new radiator assembly with top up of new coolent ,replacement of injector,repair of fuel pump ,replacement of fan belt,replacement of water pump,replacement of hose pipe,replacement of dianmo diode set,repair of turbo charger after complete and checking the entire serviceablity system of DG set testing and commissioning the same at site complete all as specified and as directed by Engineer-in-Charge.Note: New Spares as required shall be measured and paid separately under item nos 1.01 to 1.16
2Supply only Premium Genuine Oil 50 Liters CAN.
3Supply only Spinon lube oil filter.
4Supply only Spin on cartridge main fuel filter.
5Supply only Air cleaner safety element.
6Supply only Air cleaner primary element.
7Supply only Fuel flter & water filter.
8Supply only Radiator assembly.
9Supply only Injector.
10Repair of Fuel pump assembly.
11Supply only Coolant 05 ltr can.
12Supply only V Belt.
13Supply only Water pump.
14Supply only Fan Belt.
15Supply only Hose pipe.
16Supply only V Belt.
17Repair of Turbo charger .
18S & F ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1000 Amps. Includind taking down old one .
19Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised iron earth lead strip 32x6mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil,including PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion all as specified and directed..
20Supply, Fixing & Testing of Fire Water Monitor Dia 63 mm ,Flow Rate 1750 LPM , Operating Pressure 7 Kg / Cm2 , Movement Capabilities 360 degree Horizontally all as directed and specified.
21Supply & Fixing of Gun Metal Fire Hydrant valve single outlet with control valve, (Inlet Flange to ISI Marked and fitted with 63mm dia, instantaneous female coupling at the outlet complete including companion flange as per table E, Gun metal blank cap and chain, nuts, bolts and compressed asbestos gasket 3.0mm thick all as directed and specified.
22Supply ,Fixing & Testing of M.S. Hose cabinet Double Door fabricated front Glass With Key all as directed and specified.
23Supply ,Fixing & Testing of Reinforced rubber lined hose pipe of 63 mm dia and 15 mtr long including gun metal male & female instantaneous type coupling machine wound with G.I wire conforming all as directed and specified.
24Supply & fixing of first Aid fire Hose Reel Drum wall mounting , swinging type and fitted with 30 Mtrs long with G.M. Shut off nozzle 20 mm dia Gate valve all as directed and specified.
25Supply & Fixing of Gun Metal Standard Short Size Branch pipe 63 mm with 20 mm dia Nozzle outlet all as directed and specified.
26Supply & Fixing of Fire Brigade Inlet Connection Coupling with Two Way CI With G.M Suction Pipe Including blank cap & Chain necessary Companion Flanges, Nut-bolt, Gasket, Washer etc all as directed and specified.
27Supply & Fixing of pressure gauge 20 mm dia with ball valve suitable for a working pressure of 0-14 kgs rating with nipple, socket, ball valve all as directed and specified.
28Supply & Fixing of Pressure switch universal type 0-10 kgs with nipple, socket, ball valve all as directed and specified.
29Supply & Fixing of Hydrant & Two Way Wiser , Blank cap with as per required at site all as directed and specified.
30Supply & Fixing of 150 mm dia cast Iron single plate water type Non return Valve Double flanges , Nut-bolt , Gasket ,Washer complete as required at site all as directed and specified.
31Supply & fixing of 150 mm dia cast Iron Butterfly Valve including Flange on receiving Pipe with Nut-bolt , Gasket Washer insertion as required at site all as directed and specified.
32Supply & fixing of Gm Air Release Valve 25mm all as directed and specified.
33Supply & fixing of GM Ball Valve With Nipple & Socket 20 / 15mm all as directed and specified.
34M & L for repairing and replacement of glass as required at site in Hose reel box after two coats of painted fire red out side and inner side and after writing FIRE the front side all as specified and directed.
35Material & Labour for cleaning the surface by the help of cleaning agent after preparing Surfaces of Mild Steel Pipes 100/150/200 mm Bore (dia) and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer complete all as specified.
36Material & Labour for cleaning the surface by the help of cleaning agent after preparing Surfaces of Mild Steel Pipes 50/65/80 mm Bore (dia) and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer complete all as specified.
37Material & Labour for cleaning the surface by the help of cleaning agent after preparing Surfaces of Mild Steel Pipes 25/32 mm Bore (dia) and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer complete all as specified.
38Dismantling and taking out the existing centrifugal pump set 7.5 HP for servicing after disconnecting/dismantling electric/suction and delivery pipe lines transporting the pump to a reputed workshop remetalling to shaft, replacement of ball bearing of approved make, replacement of water seal gland and thorough servicing / check up and greasing, oiling, Painting etc, reassembling the pump , transporting the same to its original location, fixing in original position, connecting up electrical and water pipe line connection, testing and commissioning for satisfactory smooth operation all as directed and as specified.
39Dismantling and taking out the existing jocky pump set 9.3 KW for servicing after disconnecting/dismantling electric/suction and delivery pipe lines transporting the pump to a reputed workshop remetalling to shaft, replacement of ball bearing of approved make, replacement of water seal gland and thorough servicing / check up and greasing, oiling, Painting etc, reassembling the pump , transporting the same to its original location, fixing in original position, connecting up electrical and water pipe line connection, testing and commissioning for satisfactory smooth operation all as directed and as specified.
40Dismantling and taking out the existing Main pump set 55 KW for servicing after disconnecting/dismantling electric/suction and delivery pipe lines transporting the pump to a reputed workshop remetalling to shaft, replacement of ball bearing of approved make, replacement of water seal gland and thorough servicing / check up and greasing, oiling, Painting etc, reassembling the pump , transporting the same to its original location, fixing in original position, connecting up electrical and water pipe line connection, testing and commissioning for satisfactory smooth operation all as directed and as specified.
41M & L for Servicing of complete fire engine and after testing the for smooth functioning of electric work all as specified and as directed.
42Supply and fix in replacement of water seal gland of exisitng pump set upto all as specified and directed.
43Material,labour and testing for Fire Extinguisher of capacity 9.0 ltr , Water Co2 Type refilling & servicing with Spare Like Co2 Cartage Safety Pin , Rubber Washer etc as per required at site all as directed and specified..
44Material,labour and testing for Fire Extinguisher of capacity 10 Kg , Co2 Type refilling & servicing with Spare Like Safety Pin , Rubber Washer, Pressure Gauge as per required at site all as directed and specified..
45Material,labour and testing for Fire Extinguisher of capacity 9.0 ltr , AFFF Type refilling & servicing with Spare Like Co2 Cartage, pressure Gauge ,Safety Pin , rubber Washer as per required at site all as directed and specified.
46Material,labour and testing for Fire Extinguisher of capacity 9.0 Kg , DCP Type refilling & servicing with spare Like Co2 Cartage, Pressure Gauge ,Safety Pin , Rubber Washer as per required at site all as directed and specified.
47Cost of Transportation charges including Loading and Unloading etc.
48Supply ,Fixing & Testing of Honeywell Morley Make DXc Single Loop Card Inbuild 198 addressable Points 99 Dectors Plus 99 Device 6*40 character blue crystal display with backlight illumination 2 Sounder circuits PTREQUIRES Network Card MOF795099 additionally for network as per required at site all as directed and specified.
49Supply ,Fixing & Testing of Honeywell Morley Make Addressable Smoke Detector Advance Protocol as per required at site all as directed and specified.
50Supply ,Fixing & Testing of Honeywell Morley Make Red Add Call Point Flush Mounting Glass as per required at site all as directed and specified.
51Supply ,Fixing & Testing of Honeywell Morley Make Base for Addressable Detectors Ivory Color as per required at site all as directed and specified.
52Supply & fixing of Exide Battery : 12 Volt / 7 AH Power safe as per required at site all as directed and specified.
53M & L for Installation & Programming (52+9+9+7+7+7) as per required at site all as directed and specified.
54Supply only AVR 3 phase 400 KVA make:Kirloskar
55Supply only AVR 3 phase 100 KVA of make: Kirloskar
56Disconnecting and taking down carefully defective self starter of 24 volt capacity of 400 KVA DG Sets duly disconnect all electrical cable connections and mechanical supports, transporting the same to civil authorised work shop and dismantling and opening into parts of self starter for assessing the defects and damaged parts and rectifying the defects by changing the defective spares including testing the same after replacement of defective spares and bring back the self starter from workshop to site and re-install the same to its original position and reconnecting all connections and mechanical supports etc. all as specified and as directed by Engineer-in-charge.
57Supply and fix ON Load changeover switch side handle in sheet enclosure 415 V AC 50 Hz of Capacity 400 Amp 4 pole including taking out old unserviceable changeover switch all as directed by Engr- in- charge Make : Havells ,L&T,Legrand and its equivalent
58Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable sizecomplete. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58633256
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.71 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair/ Replacement Of Dg Set, Radiator, Fire Fighting Equipment, Fire Alarm Systems, Fire Extinguisher And Allied Works At Alg Tawang Under Ge 859 Ews
Basic Detail
Tender No 9103/E8
Bidding Type Tender
Location
City Tawang
State Arunachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 42.71 Lakhs
Tender Fee 500
EMD 86000
Exemption Available
Document List
BOQ_897164.xls
e581044c-4b3b-47d3-b738-c15c2ae38310.html
Tenderdocuments9103.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_897164.xls

html

e581044c-4b3b-47d3-b738-c15c2ae38310.html

pdf

Tenderdocuments9103.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender