Tender For Toilet Renovation/Repairing Work And Overhead Water Storage Tank
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Toilet Renovation/Repairing Work And Overhead Water Storage Tank
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/by mechanical means including stacking ofsteel bars and disposal of unserviceable material within 50 metres lead as perdirection of Engineer -in-charge. |
| 2 | Demolishing brick work including tiles and wall attached materials manually/bymechanical means including stacking of serviceable material and disposal ofunserviceable material within 50 meters lead as per direction of Engineer-in- charge. In cement mortar. (Note: existing pipe line should be continued to theother useable places. As per the site condition to be carried the other work.) |
| 3 | Dismantling W.C. pan, wash basin, urinal pans of all sizes including disposal ofdismantle material I/c malba all completed as per directions of Engineer-in- charge. |
| 4 | Dismantling and removing the existing corrugated G.I. sheet lean to roof hutand outer side brick masonry work. Material to be stocking as per direction bydepartment etc. completed. (size of roof LxBxH=3.65x3.00x2.50 mt.) |
| 5 | Dismantling soling and refilling in the same place in the plinth area as per therequirement, 30 cm depth in the flooring. |
| 6 | Dismantling the existing the steel structural of overhead water tanks. All the structural member shall be cut by the machine and removed material and stocked the removed material as per the direction by the engineer etc. completed. Item including the plumbing pipes and water tanks remove safely. (Partially hollow Cubical content steel structure 7.50 mt x7.50 mt x 8.00 mt. ) |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manualmeans in foundation trenches or drains (Not exceeding 2.00 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soilas directed, within a lead of 50 m. (For the vertical square hollow as a columninstallation)All kinds of soil.) Note: concrete work also excavated at the time of working iffound as plinth beam and other similar hear layers.). |
| 8 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15 cm to 20 cmthick including hand packing and compacting etc. complete. In the column pitsand below the plinth beams etc. completed as per the direction. |
| 9 | Providing and laying in position cement concrete of specified grade – all workup to plinth level : 1:5:10 (1 cement : 5 coarse sand derived from naturalsources: 10 graded stone aggregate 40 mm nominal size derived from naturalsources) item including the necessary shuttering and centering. As per drawingin column footing and compound wall side) |
| 10 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work up to plinth level 1:1.5:3 derivedfrom natural sources: 3 graded stone aggregate 20 mm nominal size derivedfrom natural sources) |
| 11 | Providing and fixing in position TMT-FE_ 500 bar reinforcement of variousdiameters for R.C.C. pile caps, footings, foundation, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as1821.0Kg.Page 6 of 14per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as requiredcomplete |
| 12 | Providing and laying cast in situ/Ready Mix cement concrete M-20 oftrap/granite/quartzite/gneiss metal for RCC columns as per detailed design anddrawing or as directed including steel/ply centering formwork, cover blocks, laying/pumping, compaction finishing the formed surface with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface orroughening if special finish is to be provided and curing etc. complete(excluding reinforcement and structural steel) with fully automaticmicroprocessor based PLC with SCADA enabled reversible Drum typemixer/concrete Batch mix plant (Pan) mixer) etc. complete. With fineaggregate (crushed and VSI Grade) |
| 13 | Brick masonry 230 mm thick brick masonry (cement base) Cement mortar 1:6(1 cement: 6 coarse sand). Item including the scaffolding and curing for sevendays. Extra providing and placing in position 4 Nos. 10 mm dia. M.S. bars atlintel level etc. completed. |
| 14 | Providing and laying the cement base, brick masonry in cement mortar 1:4 inhalf brick thick wall including mild steel longitudinal reinforcement of 2 bars of6 mm diameter / 2 hoop iron strips 25 mm x 16 mm placed at every thirdcourse, properly bent and bonded at end scaffolding, stacking out joints andwatering etc. complete. (Partition wall, internal side). |
| 15 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approvedsteel primer all completed fixed to steel windows by welding etc. completed asper the direction |
| 16 | Providing and fixing steel ventilator fully glazed partly fixed as per detaileddrawing without hot dip zinc coating including fabricating glazing withplain/obscured glass panes 5 mm thick and approved type and quality and ironoxidized fixtures and fastening oil paint 2 coats etc, completed. 1.60x0.60=2 Nos. ventilator0.60 x 0.45 =2 Nos. ventilators |
| 17 | Providing and fixing Aluminium work for Windows in three track (Threetrack – one for steel mosquito and two for glass panels) with extruded built upstandard tubular sections/appropriate Z sections and other sections of approvedmake conforming to IS; 733 and IS; 1285 fixing with dash fasteners of requireddia. and size, including necessary filling up the gaps at junctions i.e., at top, bottom and sides with required epdm rubbers/neoprene gasket, locking locksetc. Aluminium sections shall be smooth, rust free, straight, mitred and joinedmechanically wherever required including cleat, angle, aluminium snap beadingfor glazing/panelling, C.P. brass/SS screws, all complete as per the drawing. Powder coated aluminium, (Minimum thickness powder coating 50 micron and1.20 mm thickness and border frame panel are in 3” in aluminium) with floatcolour glass Tenanted panes of 4 mm thickness size of windows = 0.90 x 1.20mt. |
| 18 | 12 mm thick cement plaster in external and internal part. Item including thescaffolding necessary curing for the one week. As per the drawing and sitecondition. Height up to 6.750 metre. |
| 19 | Providing and laying vitrified tiles mat finish on the floor ISI standard andbranded, 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) andjoining with grey cement slurry @ 3.3. kg per sq.m. including pointing in whitecement mixed with pigment of matching shade complete. Including grouting ofjoints. Size of tiles: 600x600 mm (Sample to be got approved from Departmentbefore use.). |
| 20 | Providing and fixing Ist quality glazed vitrified as a wall tiles conforming tothickness to be specified by the manufacture) of approved make in all colours, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement : 3 coarse sand), with other cement base adhesive and joining with greycement slurry @ 3.3 kg per sq.m. including pointing in white cement mixedwith pigment of matching shade complete. Preparing the surface for the70.00Sqm.Page 7 of 14receiving the plaster and tiles etc. completed as per the direction. All the edgesat corner finished with in view of same design etc. completed as per thedirection. (Kajaria/orient bell/Nitco/simpolo or equivalent make). Height ofwall tiles taken 2.10 height. Tiles size: 600x600 mm |
| 21 | Putty work on new plastering work two and more coats (2 mm thick) internalside area. |
| 22 | Wall painting with premium acrylic emulsion paint of Interior garde havingvoc contents less than 50 gram/litre of approved brand and manufacture, including additional coats wherever required to achieve even shade and colour. Two coats or more coats. Item including the primer coats. |
| 23 | Providing and applying cement base paint with protective and decorativeAcrylic exterior emulsion paint of approved quality and brand (ICI Duluxweather shield max, Apex Ultima od Aian paints, Barger weather coat long lifeor approved brand. Rate is inclusive of applying additional coasts whereverrequired to achieve even shade and colour. One coat of exterior grade primerincluding preparation of surfaces complete all as specified and directed. |
| 24 | Providing and fixing the 30 mm thick solid PVC flush door with PVC soliddoor frame items including all the necessary hardware and fixture etc. completed as per the direction. All the material and color should be approvedbefore the fixing. (0.750 m x 2.10 mt.) for wc. |
| 25 | Providing and constructing granite wash basin platform with fixing of Zenunder counter wash basin (two Nos.) size 450 x 300 x 230 mm inhindware/parryware/seabird/Jaquar or equivalent make as per detail drawingincluding vertical both side polished kadappah stone 25 to 30 mm thicksupports with kadapap top 35 to 40 mm thick and grantie 16 to 20 mm top withside strips of granite at front and both sides of platforms raised with twoveritical granite supports 15 cm height and top granite of 75 x 40 cm includingcutting, opening for sink of required size in kadappah as well as granite etc. completed (Platform top size 2.10 m x 0.60 m. and height 0.75 mt.) (Priorapproval of sample and brand work incharge is necessary before use.) |
| 26 | Providing and laying telephone black/ocean brown granite stone of 18 to 20 mmthick for the partition between the two urinal. Full molding to the elevationalside. |
| 27 | Providing and fixing the C.P. Pillar cock with 200 extension body (Make- Jaguar) OPP-CHR-15021PM etc. completed as per direction. |
| 28 | Providing and fixing the URS-WHT-13253 N Urinal (Back Inlet) with fixingnecessary accessories size 385x325x635 mm with necessary finishing etc. completed as per the direction with all necessary material etc. completed |
| 29 | Providing and fixing the Auto closing concealed Urinal Flush Valve with wallflange in PRS-073 with necessary finishing etc. completed as per the directionwith all necessary material. |
| 30 | Providing and fixing two-way bib cock in Jaquar/ parrware / hindware orequivalent made etc. complete as per the direction. |
| 31 | Providing and fixing a hand faucet in Jaquar or equivalent make (handshower) complete unit etc. completed |
| 32 | Nickel plated towel rod 600 mm long |
| 33 | Providing and fixing the white European type wall-hung size 360 mm x 360mm x 575 mm with metro pole flush valve flow rate up to 6.0 lit/minute ofJauqar /Cera/ Hindware/ Perryware or equivalent make including PVC soil pipe, vent pipe upto outside face of wall, 100 mm dia. PVC plug bend inlet pipe allfittings, cutting & making good walls, floors etc as directed by Engineer In- charge (make shall confirm to manufacture’s Green product and shall gotapproved from the engineer In-charge. Prior approval is must before fixingthe material). |
| 34 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever)conforming to IS: 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required: while Vitreous China Orissa pattern W.C. pan of size 580 x 440 mm with integral type footrests. |
| 35 | Constructing of sewer chamber masonry chamber 60 x v60 x 75 cm inside inbrick in cement mortar 1:4 (1 cement 4 coarse sand) with the RCC cover etc. completed as per the direction item including the excavation and internalfinishing etc. completed as per the direction. (It required) |
| 36 | Providing and fixing H.D.P. Container one piece moulded water tank made outof low density polythyler and built corrugation including of delivery up todestination hoisting and fixing of accessories such as inlet, outlet overflow ofall as per IS 12701:11196, tanks capacity above 1000 to 20,000 liters. Each tank 2000 lit. capacity |
| 37 | Providing and fixing the PVC rain water pipes of 110 mm outer diameter andhaving wall thickness of 2.2 to 2.7 mm confirming to IS 13592-1992 includingproper rainwater receiving recess with PVC plug bend necessary fitting, such asoffsets, shoes including fixing the pipe on wall using etc. completed as per thedirection. |
| 38 | Providing and fixing the CPVC pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings this includesjointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of departmental in-charge. External work ASTM F441:2023. Vertical pipe along the wall side(Connection from tank to ground floor). 50 mm nominal dia. Pipes……. |
| 39 | Providing and fixing the CPVC pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings this includesjointing of pipes & fittings with one step CPVC solvent cement. Trenching, refilling & testing of joints complete as per direction of department. Externalwork ASTM F 441; 2013. 15 mm nominal dia. Pipes. |
| 40 | Providing and fixing the CPVC pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings this includesjointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of departmentExternal/internal work ASTM F 441; 2013Outer side pipe connection to laboratory. 20 mm nominal dia. Pipes…. |
| 41 | Providing and fixing the CPVC pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings this includesjointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of department. External/internal work ASTM F 441;2013. Outer side pipe connection to laboratory. 25 mm nominal dia. Pipes….. |
| 42 | Providing and fixing the brass valve (Handal type) 50 mm dia |
| 43 | Providing and fixing the brass valve (Handal type) 25 mm dia. |
| 44 | Providing and fixing the brass valve (Handal type) 20 mm dia. |
| 45 | Providing and fixing the brass valve (Handal type) 15mm dia. |
| 46 | Providing and fixing CP brass Angle valve for basin mixer and geyser points ofapproved quality conforming to IS 8931 KUP-chr-35053 PM |
| 47 | Providing and fixing CP brass stop cock (concealed) of standard design and ofapproved make conforming to IS for basin mixer and geyser points of approvedquality conforming to IS 8931 KUP-chr-35053 PM |
| 48 | Providing and fixing the CP brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 grms KUP-CHR- 35001PM15 mm nominal bore. |
| 49 | Providing and fixing 75 mm dia. Stabilizer pipe/PVC soil vent/waste pipe andnecessary fixtures and filling STMD-1785 & ASTM D2466 such as bends, tees, single junction, slotted vent, clamps etc. complete. 11.00 mt. at ground level 6.00 mt. at vertical to the wall |
| 50 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete withC.I. grating brick masonry chamber with water tight C.I. cover with frame300x300 mm size (inside) the weight of cover to be not less than 4.5 kg andframe to be not less than 2070 kg as per standard design 100 x 100 mm size Ptype with common burnt clay F.P.S. (Non-modular) bricks of class designation7.5 |
| 51 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC gratin, bend, connecting piece of upvc pipe up to the outside face of wall making thegood damaged surface and testing etc. completed. |
| 52 | Providing, laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-DrainUpvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent asper EN 13476 or equivalent 15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete |
| 53 | Providing and fixing ball valve (brass) of approved quality, high or lowpressure, with plastic floats complete: 20 mm nominal bore. |
| 54 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete: 25 mm nominal bore. |
| 55 | Providing and fixing the 50 mm circular hollow pipe as a hand railing to thestaircase |
| 56 | Termite proofing chemical inserts in the plinth at the 450 mm interval in thesquare, before the plinth slab. Work to be done along the plinth beam internaland outer side also etc. completed as per the direction. |
| 57 | Providing and fixing the 450 mm x 550 mm size superior type Belgium mirrorwith 16 mm dia. Nickel plated towel rod etc. complete. |
| 58 | Electric pipe 1” dia (2.5 mm thick) in good quality 10 feet long with proper fitting |
| 59 | Bend 1” |
| 60 | Junction box |
| 61 | Wire 2.5 mm (Different colour) in good and approved quality. |
| 62 | Wire 1.5 mm (Different colour) in good and approved quality. |
| 63 | 12 Module metal box |
| 64 | 12 module board |
| 65 | Switches |
| 66 | Socket |
| 67 | Exhaust fan Metal 1400 rpm 12” dia. (Heavy duty) with good and approved quality. |
| 68 | Mirror fitting |
| 69 | Surface fitting 15 watt circular or or square type(LED) in good quality Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender