Tender For External Work Of D Type Tower Buildings (G+6) In Niser Campus Jatni.
Tender Value
68.08 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
1.36 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Work Of D Type Tower Buildings (G+6) In Niser Campus Jatni.
BOQ
| Sl. No. | Item Description |
| 1 | Finishing existing walls with Acrylic Smooth exterior paint (with nanoblock & silicon additives quality) required shade (Asian Paint, Berger Paint, Dulux Paint), including cleaning wall by scrapping old dirts , moulds etc by sand paper/water jetting, filling cracks with approved crackfiller (after making 2mm grove) etc at all locations & heights (including scaffolding/support system for the work) as directed by EIC : Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including scrapping damaged pain at all locations & heights (including scaffolding/support system for the work) :One or more coats on old work |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Including for all heights, necessary support and scaffolding charges etc) |
| 4 | Taking out doors, windows,louvers and clerestory windows (steel, aluminum or wood) shutter including chowkhats, architrave, holdfasts etc. complete, stacking within 50 metres lead and refixing the same at all locations & heights (including scaffolding/support system for the work) :Of area 3 sq. metres and below |
| 5 | Providing and fixing on wall face Rigid PVCpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,( at all locations & heights (including scaffolding/support system for the work) (i) Single socketed pipes. 110 mm diameter |
| 6 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,at all locations & heights (including scaffolding/support system for the work) leaving 10 mm gap for thermal expansion. 110 mm dia: Coupler |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,at all locations & heights (including scaffolding/support system for the work) leaving 10 mm gap for thermal expansion. 110 mm dia: Single tee with door |
| 8 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,at all locations & heights (including scaffolding/support system for the work) leaving 10 mm gap for thermal expansion. 110 mm dia:\\"Bend 87.5° |
| 9 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect at all locations & heights (including scaffolding/support system for the work) as per the direction of Engineer-in-Charge. |
| 10 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete at all locations & heights (including scaffolding/support system for the work) as per the direction of Engineer-In-Charge. |
| 11 | Providing & Applying weather proof sealant on outer joints of approved make confirming to IS at all locations & heights (including scaffolding/support system for the work) directed by Engineer-in-charge. Sealant 25mmx10mm at joints |
| 12 | Providing and applying of MAPEI MAPELASTIC SMART two-component, high flexible, elastic cementitious mortar made from synthetic fibres, special admixtures and synthetic polymers in water dispersion with an elongation of 120% (DIN 53504), Static crack bridging ability of >2.5mm (EN 1062-7), Permeability to water vapour sD = 3.6 m, µ = 1800 (EN ISO 7783-1), Impermeability to water < 0.05 kg/m²·h0.5 (EN 1062-3), Permeability to CO₂ sDCO2 >50m (EN 1062-6), Reaction to fire (Euroclass): E (EN 13501-1), adhesion to concrete after 28 days: 1.3 N/mm² (EN 1542) when applied @ 2mm thickness on the surface prepared for waterproofing to be carried out to ensure the mechanical properties of the product. Apply two layers of the product, with a non-woven polypropylene fabric of MAPETEX SEL 150 gsm with a weight of 150 g/m², placed between the first and second layers with a min overlap of 5 cm. The application of the product shall be carried out after the thorough preparation of the surface which includes cleaning, crack treatment, grouting. Minimum of 10mm all round gap to be provided between the pipe and the core. Provide shuttering below the core and providing and applying the hydro-swellable paste for joint treatment. MAPEPROOF SWELL Single component hydro-expensive paste. Providing and applying of super flow micro-concrete with dual shrinkage-compensation called MAPEFILL 06, high flow, single component formulation. The micro-concrete shall be in accordance to EN 1504-6 & shall exhibit a compressive strength minimum of >40 MPa at 7 days and >55 MPa at 28 days, a flexural strength of >9 Mpa after 28 days, adhesion to concrete substrate of >2.5 Mpa after 28 days. The microconcrete shall not require polymer bonding agent as primer. Can be used for grouting of gaps with thicknesses ranging from 50 mm to 250 mm and shall have fresh wet density in excess of 2250 kg/M3 at all locations & heights (including scaffolding/support system for the work) as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender