Tender For Additional 2 Room Building At Ms Narwar Panchayat Ghan Block Drabshalla Under Head Elementry Education Year 2026-27
Tender Value
34.78 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
7 days left
EMD
69560
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional 2 Room Building At Ms Narwar Panchayat Ghan Block Drabshalla Under Head Elementry Education Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Constt of Scool Building and Kitchen shed |
| 2 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar inclliding Truss b/ Plinth Demloishing / CGI Sheets and Carraige of Desposible Maretial to dumping Area complete Job as per Engineer Incharge L/S |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :25 meter beyond 1 m from cutting edge |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (Crushed stone aggregates). |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 10 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class Deodar wood |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Providing 40x5 mm flat iron hold fast 40 in long including fixing to frame with 1Omm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) |
| 15 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class Kail wood |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.coir veneer board (conforming to IS 14842) ( 12 mm thick) |
| 17 | Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float for glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood |
| 18 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 35mm thick |
| 19 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Budloo/fir wood 50x12mm |
| 20 | Centering and Shuttering including strutting, popping and removal of form work Footing Found. Bases of Column |
| 21 | Centering and Shuttering including strutting, popping and removal of form work Beams Plinth Beams and Lintels etc |
| 22 | Centering and Shuttering including strutting, popping and removal of form work Suspanded Floor Landing Balconies etc |
| 23 | Centering and Shuttering including strutting, popping and removal of form work Columns, Pillars, Piers, Abutments, Posts and Struts |
| 24 | 15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 25 | 12 mm cement plaster to ceiling of mix 1 : 4(1 cement: 4 fine sand) |
| 26 | Providing and laying Stone Soling,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 27 | Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 28 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) :Natural colour insulating board 6 mm thick |
| 29 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Badloo /far wood |
| 30 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel Primer all works. |
| 31 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.50mm thick) |
| 32 | Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete0.50mm thick with zinc coating not less than 275gm/m2 |
| 33 | Providing and fixing plained eaves boarding 250mmx32mm nominal size. 2nd class kail wood |
| 34 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 36 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work |
| 38 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 39 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Aggregates. |
| 40 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
| 41 | Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm |
| 42 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete (A ) 100 x 10 mm : |
| 43 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (B) 200 x 10 mm |
| 44 | Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Single rubber stopper |
| 45 | Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transparent or dyed to required colour or shade with nuts and screw etc complete (A) 125mm |
| 46 | Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transparent or dyed to required colour or shade with nuts and screw etc complete (B) 100 mm |
| 47 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 48 | Add Cost of Electrification (LS) including accessary as per Engineer In charge |
| 49 | Carriage of sand by Mechenical transport & manual Labour including loading , unloading & stacking complete lead upto 40 km & 0.50 km |
| 50 | Carriage of Stone aggregates by Mechenical transport & manual Labour including loading , unloading & stacking complete lead upto 40 km & 0.50 km |
| 51 | Carriage of Bricks by Mechenical transport & manual Labour including loading , unloading & stacking complete lead upto 180 km & 0.50 km |
| 52 | Carriage of stone at an avg. distance of 1.00 km by AT |
| 53 | Add L/S for any necessary item as per Engineer incharge & Add Inaguration stone and Neccsary arrangement Complete Job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender