Public Administrative Department Local Bodies Closing in 6 days TDR #58632402

Tender For Repair Work Of Neem Park And Construction Of Pathway In Vijayant Khand-3 Of Chinhat Second Ward.

Issued by Local Bodies · Lucknow, Uttar Pradesh
Tender Value
1.05 Crore
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
3.17 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair Work Of Neem Park And Construction Of Pathway In Vijayant Khand-3 Of Chinhat Second Ward.

BOQ

Name of Work:- चिनहट द्वितीय वार्ड के विजयंत खण्ड-3 में नीम पार्क कि मरम्मत एवं पाथवे का निर्माण कार्य।
Sl. No. Item Description
1Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge:, All kinds of soilDSR 2023- 2.1.1
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil.DSR 2023- 2.8.1
3supplying and stacking of good earth at site including royalty and carriage up to 10km complete( earth measured in stacks will be reduced by 20% for payment- Good Earth
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 2023- 4.1.3
5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8
6Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorized overlaps shall be measured for development work.- L.D.A APPRO.
7Providing and corrugated 1.00 mm thick with zink coating not less than 275gm/sqm G.S. sheet roofng including vertical/cuverd furface fxed with polymer coated J or L Hooks, bolts and nuts 8 mm diameter with bitumen. PWD Sor 2020-21 DAR 12.1.1- 12.1.1
8Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1DSR 2023- 5.9.1
9Centering and shuttering including strutting, propping etc. and removal of form for :, Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.DSR 2023- 5.9.2
10Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cumDSR 2023- 5.33.1.1
11Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.1.1
12Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :, Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.4.1
1312 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand)DSR 2023- 13.4.1
14Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023- 13.80
15Finishing walls with textured exterior paint of required shade :, Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.DSR 2023- 13.110.1
16Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completeDSR 2023- 13.88
17'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate- LDA Sanctioned Rate
18|Supply & Fixing of Swing 4 seater SW-2 including cost of swing seater (shape & size attached witth estime) fixing the swing seater including excavation PCC 1:4:8 cement C0arse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnt incduding all material & labour required fixing and onenting etc all complete under the direction of the EN, Sanction Rate- S/R 4
19Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete., Hot finished seamless type tubes.DSR 2023- 10.16.2
20Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels., Granite stone slab colour black, Cherry/Ruby red, Area of slab upto 0.50 sqmDSR 2023- 8.2.2.1
21Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, same as item 21 above but on new wood surfaceDSR 2023- 13.61.1
22Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.DSR 2023- 16.91.2
23Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor graded on perpared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratoy roller to achieve the desired density complete as per clause 401. for grading I material (GSB-1) (Sanction rate)-1001
24Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.., Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortarDSR 2023- 15.7.4
25Providing and laying 15mm thick(Average) Synthetic Rubberized flooring for Jogging track and finishing the surface for laying rubberized flooring as per details given below a) Apply PU (Polyutherane) Binder on surface for bonding to rubber granules b) Providing and Laying First Layer of 9 mm thick black SBR(Styrene-Butadiene Rubber) Granules 1-3.5mm thick @9kg/sqmt mixed with 18-20% single component PU Binders c) Providing and laying Secured and topmost Layer of 6mm thick colored(As directed by Engineer in charge) EPDM(Ethylene Propylene dine Monomer) Rubber granules colored 1-3.5mm thick Made in India under quality management system of ISO 9001:2015 or Above with 20%- 22% Polymer Content/V RATING Min3/5 on Grayscale and origin of raw material from Europe/USA and Test certificates of VOCs, Combustibility, RoHS Directive 2002/95/EC AND Polymer Content-1078 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58632402
AUTHORITY Local Bodies
TENDER VALUE 1.05 Crore
LAST DATE 27-11-2026
Authority
Authority Name Lucknow Development Authority
Work Description Tender for Repair Work Of Neem Park And Construction Of Pathway In Vijayant Khand-3 Of Chinhat Second Ward.
Basic Detail
Tender No 144/E-Tender/CE/2026-27_10
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 1.05 Crore
Tender Fee 8000
EMD 3.17 Lakhs
Exemption Not Available
Document List
8536be14-851f-4d24-96f4-3e11bda996ab.html
BOQ_2299379.xls
Tendernotice_1.pdf
T_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

8536be14-851f-4d24-96f4-3e11bda996ab.html

xls

BOQ_2299379.xls

pdf

Tendernotice_1.pdf

pdf

T_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender