Agriculture Government Departments Closing in 14 days TDR #58630762

Tender For General-Dp Tvm- Project No 1559- Rennovation Of Calf Shed @ Jersey Farm Chettachal-Rennovation Of Calf Shed-General Civil Work

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
14 days left
EMD
21178
Bank guarantee accepted
Document Fee
1870
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for General-Dp Tvm- Project No 1559- Rennovation Of Calf Shed @ Jersey Farm Chettachal-Rennovation Of Calf Shed-General Civil Work

BOQ

Name of Work:- GENERAL-DP TVM- Project No 1559- Rennovation of Calf shed @ Jersey Farm Chettachal-Rennovation of Calf shed-General Civil Work
Sl. No. Item Description
1Calf Shed and SlurryTank
215.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
315.17.1:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:R.S. Joists
42.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
54.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
64.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
75.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars
85.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
95.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1050.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
1113.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
1213.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1313.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1413.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
1510.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1612.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
17OD3353/2026-2027:Providing and fixing Welded wire mesh of 25 x 25 mm ( nearest )of weight not less than 2.0 kg per sqm to GI frames etc including cost of welding rod plant and machineries etc (Existing Spec 16.70.1)
1813.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
19slurry tank
202.7.2:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)
215.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
224.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
235.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars
245.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2513.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58630762
AUTHORITY Government Departments
TENDER VALUE 8.47 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Department Of Agriculture
Work Description Tender for General-Dp Tvm- Project No 1559- Rennovation Of Calf Shed @ Jersey Farm Chettachal-Rennovation Of Calf Shed-General Civil Work
Basic Detail
Tender No AGRI/DOA/149/2026-2027
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 20 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 8.47 Lakhs
Tender Fee 1870
EMD 21178
Exemption Not Available
Document List
affidavit.pdf
BOQ_1522815.xls
ea5b1156-f98d-46af-a403-ad8f2dfeccd9.html
epay.pdf
formoftender.pdf
integritypact.pdf
preliminaryagreement.pdf
Tendernotice_1.pdf
viewnit.pdf
viewsbd.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

affidavit.pdf

xls

BOQ_1522815.xls

html

ea5b1156-f98d-46af-a403-ad8f2dfeccd9.html

pdf

epay.pdf

pdf

formoftender.pdf

pdf

integritypact.pdf

pdf

preliminaryagreement.pdf

pdf

Tendernotice_1.pdf

pdf

viewnit.pdf

pdf

viewsbd.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender