Power Government Departments Closing in 21 days TDR #58630227

Tender For Facelifting Including Rewiring For C.E. Office Bemina

Issued by Government Departments · Srinagar, Jammu and Kashmir
Tender Value
18.87 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
21 days left
EMD
37740
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Facelifting Including Rewiring For C.E. Office Bemina

BOQ

Name of Work:- Facelifting including rewiring for C.E. office Bemina
Sl. No. Item Description
1TO Room Washroom
2\\"Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours White, Ivory, Fume Red Brown
3Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm
4Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 1000x1000 mm
5Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
6Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
7Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
8Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
9Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge
10Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
11Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
12Providing and fixing 15 mm nominal bore C.P. brass two-way bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
13Providing and fixing 15 mm nominal bore C.P. Health Faucet for Toilet with Flexible Metal Hose and Holder of approved quality conforming to IS standards.
14Wall Panelling and Flooring
15Providing and fixing of HDF (AC 4type) 8mm wooden laminate flooring approved brand and quality sample to be got approved by engineer in charge at site over 4 to 6mm thick PVC Thermocoal base including providing and fixing of matching imported wooden cornice beading for edges with necessary fitting and fixture etc including all carriage complete as per direction of engineer in charge at siteTechnical Officer room = 195.75sq.ft Technical section 1st floor room = 150 ft2Technical section Ground floor room = 150 ft2Accounts officer room = 157.5 ft2Establishment section room = 198.75 ft2Accounts section room= 165 ft2AAO room= 165 ft2CE side room= 101.25 ft2Total = 1283.25 sq ft
16Providing and fixing of 8mm PVC paneling for ceiling of approved make and pattern including cornice at the edge with all the carriage complete as per the direction of EIC at site ncluding base work of GI channels/ Budloo strips (2\\"x2\\") with necessary screws/nails and cornice at the edge with all the carriage complete as per the direction of EIC at siteTechnical Officer room = 195.75sq.ft Technical section 1st floor room = 150 ft2Technical section Ground floor room = 150 ft2Accounts officer room = 157.5 ft2Establishment section room = 198.75 ft2Accounts section room= 165 ft2AAO room= 165 ft2CE side room= 101.25 ft2Total = 1283.25 sq ft
17Providing and fixing of 8mm PVC paneling of approved make and pattern including cornice at the edge with all the carriage complete as per the direction of EIC at siteCorridor = 1352 ft2
18Providing and fixing of HDF (AC 3type) 8mm wooden laminate approved brand like green panel, Action TESA and quality sample to be got approved by engineer in charge at site and pattern including base work of GI channels/ Plyboard strips with necessary screws/nails and cornice at the edge with all the carriage complete as per the direction of EIC at siteTechnical section 1st floor room = 379 ft2Technical section Ground floor room = 379 ft2Accounts officer room = 379 ft2Establishment section room = 411 ft2Accounts section room= 416 ft2AAO room= 416 ft2CE side room= 303 ft2Total = 2683 ft2
19Chief Engineer Wash room
20Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm
21Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 1000x1000 mm
22Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm
23Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
24Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
25Providing and fixing 15 mm nominal bore C.P. brass two-way bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
26Providing and fixing 15 mm nominal bore C.P. Health Faucet for Toilet with Flexible Metal Hose and Holder of approved quality conforming to IS standards.
27Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge
28Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
29Towel rail C.P. brass 750 mm together With a pair Of C.P. brass brackets to fit the sipe Of towel rail
30Common Washroom
31Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm
32Demolishing of cement concrete and taking out of Indian squatting pan and waste pipe
33Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 1000x1000 mm
34Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm
35Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
36Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
37Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: - (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
38Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
39Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
40Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge
41Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
42Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
43Towel rail C.P. brass 750 mm together With a pair Of C.P. brass brackets to fit the sipe Of towel rail
44Common Female Washroom
45Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm
46Demolishing of cement concrete and taking out of Indian squatting pan and waste pipe
47Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 1000x1000 mm
48Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm
49Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
50Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
51Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge
52Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
53Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
54Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
55Towel rail C.P. brass 750 mm together With a pair Of C.P. brass brackets to fit the sipe Of towel rail
56Sanitary Items
57Providing and fixing soil, waste and vent pipes : 18.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
58Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 18.38.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
59Providing and fixing plain bend of required degree: 18.39.1 100 mm dia. 18.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
60Providing and placing on top floor polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
61Providing and placing on Ground floor polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
62SITC of 1 h.p. monoblock pump of reputed make Crompton/Havells/Kirloskar with High Suction Capacity Instant suction, Up to 8.0 meters lift, high Grade Electrical Stamping Reduces electrical losses & improves pump effciency. High Grade forged brass impeller for longer life. Anti jam Winding, Easy for Maintenance: Simple construction, easily replaceable wear & tear parts.
63Repairs/remodeling of the existing water supply system to incorporate the water tanker and monoblock pump with adding of GI pipeline as per the requirement at site including all the accessories like GI nipple, Union, joints, bends, Tees as per the requirement of the site
64SITC of 350-watt pressure pump with brass suction and delivery connectors Flow Rate 44601 Liters Per Minute. The job includes any changes to be made to the existing pipe network for installation of the pressure pump as per the requirement of the Engineer in Charge
65Kitchen/Pantry(2no’s)
66Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 5.4.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) For making of kitchen counter (2 no’s)
67Centering and shuttering including strutting, propping etc. and removal of form for:Shelves (cast-in-situ)For making of kitchen counter (2 no’s)
68Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more.
69Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 8.2.1 Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)For making of kitchen counter (2 no’s)
70Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.1 Marble Work
71Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
72Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.11.2.2 Kitchen sink without drain board 470x420mm bowl depth 178mm
73Providing and fixing of cupboard made of water proof plywood 12mm framework and shutters made of 19mm plywood and a mica over the shutters as per the directions of Engineer in charge including all the accessories like hinges, handles, tower bolts, catchers locks etc. including all complete jobFor cupboard under the Kitchens and in the accounts section room
74Repair to the ceiling near the pantry by way of reinforcing the frame work with wooden beams of required length and width then fixing of 12mm ply on ply board 6’x8’ including painting of the repaired ceiling
75Electrical Work and Air Conditioning
76Repair and replacement of Split, all weather, 1.5-ton Air Conditioner of standard quality along with all allied fittings, cabling, taping, connectors, MCBs etc. of following specificationType: SplitCapacity in Tons: 1.5 Ton HOT & COLD INVERTER SPLIT ACCooling Capacity :5000 WHeating Capacity :5000 WCompressor: Variable SpeedRemote Control: YesRefrigerant: R-32Operating Modes: Eco Mode, Dry Mode, Power Full Fan ModeCondenser Coil: Copper
77SITC of Fully Automatic Water Level Controller & Indicator with Dry Run Protection including installation water level indicator on sump water tanker and overhead water tanker so that the motor operation could be automated. The job includes providing and fitting of wire from the 2 water tankers to the water level controller
78Complete job of electrification of office of CE office by way of replacing old wiring, switches, sockets, etc and by providing & fixing of new wiring, sockets, switches, MCBs, etc after concealed piping along with fixing of existing inverter to a suitable position as per the Engineer-in Charge with following main items. (Make: Anchor/Havells)
794.00 sq mm HRFC PVC, Cu wire
802.5 sq mm HRFC PVC, Cu wire
811.5 sq mm HRFC PVC, Cu wire
82Switches. 6. A
833 Pin, 6A Socket
84Switches 16 A
853 Pin, 16A Socket
86Fan electronic Regulators
87Tape Rolls
88MCB 16A, SP
89MCB 20A, SP
90MCB 32A, SP
91MCB 40A, DP
92MCB 63A, DP
93MCCB 100A 2 Pole, 36 kA, Fixed Overload & Fixed Short Circuit Settings, Thermal Magnetic Trip Unit (FTFM)
94PVC Conduits/channel 10 ft
9512 watt Warm LED Conceilded light on PVC Panelling
96100A Triple Pole Changeover, Three Phase
97SPN 12-way Distribution Box
98Providing and fitting of 100 A 3 phase bus Bar Copper Distribution box along with fixing of the cables over the Distribution box including thumbing of the cables
99Shed for old record
100Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level in 1:4:8 aggregate 40mm nominal size crushed over the excavated area inside the generation store for the installation of the CGI Shed of dimension 15’x20’(2’x2’x3”)x6no’s
101Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level in 1:1½:3 aggregate 20mm nominal size crushed over the excavated area inside the generation store for the installation of the CGI Shed of dimension 15’x20’ (2’x2’x2’3”)x6 no’s
102Form work including centering and shuttering including strutting propping etc. and removal of the form for a. Foundation, footing (2’x1’)x4x6no’s=48 ft2
103Fabrication and erection of framework for the CGI shed of dimension 15’x20’ by way of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes The bill of materials for the fabrication is detailed in SBD Total weight (A+B+C+D) = 1,475.48 kgs
104Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. With 1.00mm thick with zinc coating not less than 275 GSM Sides = 10ftx70ft = 700 sqftRoof = 11 ft x20 ft x 2no = 440 sq ft Total =1140 sqft = 105.9095 m2
105Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Qnty 15ft x 20 ft x 0.6ft = 150cuft =4.25 cum
106Smooth finishing of the exposed surface of CC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing. Total area = 27.87 Sqm
107Form work including centering and shuttering including strutting propping etc. and removal of the form for a. Foundation, footing 70 ft x 1ft=70 ft2= 6.5 m2 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58630227
AUTHORITY Government Departments
TENDER VALUE 18.87 Lakhs
LAST DATE 12-12-2026
Authority
Authority Name Jammu And Kashmir State Power Development Corporation Limited
Work Description Tender for Facelifting Including Rewiring For C.E. Office Bemina
Basic Detail
Tender No E-NIT No 40 of 2026-27 dated 19.11.2026
Bidding Type Tender
Location
City Srinagar
State Jammu and Kashmir
Key Dates
Publish Date 20 Nov 2026
Submission Date 12 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 18.87 Lakhs
Tender Fee 1500
EMD 37740
Exemption Available
Document List
8ef6baee-3e03-45ba-bc59-d41de46803ee.html
BOQ_1126340.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 21 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

8ef6baee-3e03-45ba-bc59-d41de46803ee.html

xls

BOQ_1126340.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender