Tender For Facelifting Including Rewiring For Se Office Baramulla
Tender Value
7.58 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
19 days left
EMD
15160
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Facelifting Including Rewiring For Se Office Baramulla
BOQ
| Sl. No. | Item Description |
| 1 | Repair to plaster of thickness 12mm to 20 mm in patches of area in proper shape raking out joints and preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground (with cement mortar 1:4) |
| 2 | Renewing Glass Panes with with wooden fillets wherever necessary : Float Glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 3 | Providing and fixing of brass/SS curtain rods of wall thickness 1.25 mm with two brass/SS brackets with brass/SS screws & wooden/plastic plugs, etc with end caps (complete Job): 25mm diameter |
| 4 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: (W.C. pan with ISI marked white solid plastic seat and lid). |
| 5 | Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 6 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereverrequired:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 7 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 8 | Providing and fixing on wall 50 LTRS Electric Geyser with ABS Body. Makes:- Bajaj/ Crompton/ Jaquar/Hindware or equivalent. |
| 9 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 10 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 11 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 12 | Providing and fixing CP Brass Single lever telephonic wall mixer of approved make |
| 13 | Providing and fixing Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 14 | Mirror with plastic moulded frame rectangular shape 453x357 mm |
| 15 | Towel rail C.P. brass 750 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail |
| 16 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 17 | Supply of AC 230/250 Volts, 50 Hz exhaust fan with louveres of Following Sizes including connection etc. complete as required . Makes:-(Havells/CG/Bajaj) 150 mm |
| 18 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 19 | Complete Job of Providing and fixing of split, all weather, 2 ton Air Conditioner of standard quality along with wall mount 5KVA Copper wound automatic voltage stabilizier with all allied fittings, Cabling, taping, connectors, MCBs, etc at SE Chamber |
| 20 | French spirit polishing, Two or more coats on new works including a coat of wood filler for SE Chamber |
| 21 | Taking out existing wooden door shutter, windows repair by cutting, painting etc. and refixing of repaired door shutters, windows to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 22 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 kg/sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.. |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 24 | 15mm nominal outer dia pipes. |
| 25 | 20mm nominal outer dia pipes. |
| 26 | 25mm nominal outer dia pipes. |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and laying Vitrified tiles in floor and path along with skirting (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 29 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm |
| 30 | Providing & fixing of >5 mm factory made PVC wall panelling i/c carriage (Size of panel = 10 feet x 10 inch) for three rooms of SE office having size 16'x13' |
| 31 | Complete job of electrication of office of SE, Gen C1, Bla by way of replacing old wiring, switches, sockets, etc and by providing & fixing of new wiring, sockets, switches, MCBs, etc after concealed piping along with fixing of existing inverter to a suitable position as per the Engineer-in Charge with following main items. (Make: Anchor/Havells) |
| 32 | 4.00 sq mm HRFC PVC, Cu wire |
| 33 | 2.5 sq mm HRFC PVC, Cu wire |
| 34 | 1.5 sq mm HRFC PVC, Cu wire |
| 35 | Switches 6 A |
| 36 | 3 Pin, 6A Socket |
| 37 | Switches 16 A |
| 38 | 3 Pin, 16A Socket |
| 39 | Fan electronic Regulators |
| 40 | Tape Rolls |
| 41 | MCB 16A, SP |
| 42 | MCB 20A, SP |
| 43 | MCB 32A, SP |
| 44 | MCB 40A, DP |
| 45 | MCB 63A, DP |
| 46 | PVC Conduits 25 mm |
| 47 | SPN 12 way Distribution Box Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender