Housing Urban and Rular Development Local Bodies Closing in 3 days TDR #58629710

Tender For Renovation/ Upgradation Of Meeting Hall At The 2Nd Floor Of Old Block Of Ut Guest House, Sector-6, Chandigarh (E.I. Work)

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation/ Upgradation Of Meeting Hall At The 2Nd Floor Of Old Block Of Ut Guest House, Sector-6, Chandigarh (E.I. Work)

BOQ

Name of Work:- RENOVATION/ UPGRADATION OF MEETING HALL AT THE 2ND FLOOR OF OLD BLOCK OF UT GUEST HOUSE, SECTOR-6, CHANDIGARH (E.I. WORK)
Sl. No. Item Description
1DSR Item No. 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
2Group C
3DSR Item No. 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.
4Group C
5DSR Item No 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
63 x 1.5 sq. mm
73 x 2.5 sq. mm
83 x 4 sq. mm
9DSR Item No. 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
1025 mm
11DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
125/6 amps switch
133 Pin 5/6 A. socket outlet
14Telephone socket outlet
15TV antenna socket outlet
16DSR item No.1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
17DSR item No.1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
181 or 2 Module (75 mmX75 mm)
194 Module (125 mmX75 mm)
206 Module (200 mmX75 mm)
218 Module (125 mmX125 mm)
2212 Module (200 mmX150 mm)
23DSR item No.1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
2412 Module
25DSR item No.1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
26DSR item No.1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
27DSR Item No. 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
28DSR Item No.1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
29DSR item No.1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.
30DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator).
314 way (4 + 12) Double door
32DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
33Single pole
34Triple pole and neutral
35DSR item No.39.17.1 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, (As per Completed Item No. 16 on DNIT)
361 Run of cable
37DSR item No.8.1.3 LED Down lighter (SMD Type) (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, (As per Completed Item No. 17 on DNIT)
3812 -15 watt
39DSR item no. 8.7.10 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,
4036 watt
41DSR item No.9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, (As per Completed Item No. 19 on DNIT)
421400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum)
43Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess / surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. (As per Completed Item No. 20 on DNIT)
44Supply & erection of fresh air fan high speed motor with copper wound 10” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Completed Item No. 21 on DNIT)
45Supply & erection of Cabin Fan 16” sweep (metal body) oscillating type complete with aluminium blades & regulator. The fan should have regulator switch for speed regulation. The fan should be of Havells make V3/ Crompton make Strom2/ Orient make Tornado-II only. (As per Completed Item No. 22 on DNIT)
46Supply & fixing of Computer jack & contact one module RJ45 of Molex/ R&M/ Panduit make including making connection etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629710
AUTHORITY Local Bodies
TENDER VALUE 1.98 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Chandigarh Administration Engineering Department
Work Description Tender for Renovation/ Upgradation Of Meeting Hall At The 2Nd Floor Of Old Block Of Ut Guest House, Sector-6, Chandigarh (E.I. Work)
Basic Detail
Tender No E1/TN-504
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 20 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 1.98 Lakhs
Tender Fee Ref. Documents
EMD 4000
Exemption Not Available
Document List
8e493a70-8154-4f69-a3cc-11d7e819edf7.html
Annexure.pdf
BOQ_119412.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

8e493a70-8154-4f69-a3cc-11d7e819edf7.html

pdf

Annexure.pdf

xls

BOQ_119412.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender