Tender For Providing Phs Works In The Auditorium/Multipurpose Toilets To Be Used For Mc State Election 2026 In Post Graduate Govt. College Sector-11,Chandigarh.(Ch To 2215-Non Plan)
Tender Value
1.83 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
3678
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Phs Works In The Auditorium/Multipurpose Toilets To Be Used For Mc State Election 2026 In Post Graduate Govt. College Sector-11,Chandigarh.(Ch To 2215-Non Plan)
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 above plinth |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 4 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 6 | 1:4 (1 cement: 4 fine sand) |
| 7 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Circular tank) (DSR 18.48) |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 10 | 20 mm dia nominal bore |
| 11 | 25 mm dia nominal bore |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 13 | 20 mm dia nominal bore |
| 14 | 25 mm dia nominal bore |
| 15 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 16 | 20 mm nominal bore |
| 17 | Providing and fixing uplasticised PVC connection pipe with brassunions : |
| 18 | 45 cm length |
| 19 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 20 | 15 mm dia nominal bore |
| 21 | 20 mm dia nominal bore |
| 22 | 25 mm dia nominal bore |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 24 | 15 mm nominal bore |
| 25 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) |
| 26 | 15 mm nominal bore |
| 27 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 28 | Providing and fixing of washbasin with C.I bracket with CP waste excluding pillar tap size 22\\" x 16\\" approved make complete in all respects |
| 29 | Providing and fixing white vitreous china water closet wall hung (European type) with seat and lid, C.I.brackets, 40 mm flush bend with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid and tank complete( Make Cera Ivory ) |
| 30 | Providing and fixing of china ware half stall urinal with PVC spreader with CP dome waste complete in all respects |
| 31 | Providing and fixing of china ware urinal partition complete in all respects of approved make |
| 32 | Providing and fixing of soap dish of approved make complete in all respects |
| 33 | Providing and fixing of C.P grating 100 mm dia approved make complete in all respects |
| 34 | Providing and fixing of Looking glass mirror 5mm thick of approved make with PVC beading 1-1/4\\"x3/4\\" with plastic Hard Board duly fixed on wall with screw / nuts/ clips/rod plug etc. complete in all respect to the entire satisfaction of EIC. |
| 35 | Providing & fixing of CP towel ring Normal round approved make complete in all respects |
| 36 | Providing and fixing M.S girder of size 150 x 75 mm for making a platform for placing PVC water storage tanks on terrace and painting the same with 1 coat of red oxide primer and 2 coats of black enamel paint complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender