Tender For Replacement/Repair Of Old And Damaged Steel Structures, Including Painting Of The Structures And Side Cladding Of The Hopper, And Replacement Of Damaged Sheets With New Profile Sheets Includes Dismantling, Fabrication, And Erection Of The
Tender Overview
Project Description
Tender for Replacement/Repair Of Old And Damaged Steel Structures, Including Painting Of The Structures And Side Cladding Of The Hopper, And Replacement Of Damaged Sheets With New Profile Sheets Includes Dismantling, Fabrication, And Erection Of The Top And Bottom Plates Of The Conveyor Chain Inside The Hopper, Dumping Plate And Hopper Plates Of 05 Nos Feeder Breaker-15,20, 21, S2 And S3 At The Back Up Gevra Project.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 2 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 3 | Dismentling roofing including ridges,hips valleys and gutters etc and stacking the material within 50 mtr lead as per instruction of Engr. I/C |
| 4 | Painting of Gantry structures and vertical supporting column from tail end to discharge with single coat red oxide and two coat of synthetic enamel paint of approved brand of required shade including cleaning of dirt & dust etc as per the instruction of Engineer I/C. |
| 5 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugated as approved by Engineer-in-charge ) 0.60 mm (+/- 0.5%), total coated thickness (TCT), with zink coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in -charge. The sheet sheel be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolt and nuts 8 mm diameter with bitumen and G.I. limpet washer or with G.I. limpet washers filled with lead complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 6 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender