Educational and Research Institute Government Departments Closing in 20 days TDR #58629394

Tender For Construction Of 20 Toilet And 20 Bath Complex At Kgbv Litipara Block -Litipara Dist-Pakur

Issued by Government Departments · Pakur, Jharkhand
Tender Value
53.83 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pakur → Jharkhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of 20 Toilet And 20 Bath Complex At Kgbv Litipara Block -Litipara Dist-Pakur

BOQ

Name of Work:- Construction of 20 Toilet and 20 Bath Complex at KGBV Litipara Block -Litipara DIST-PAKUR
Sl. No. Item Description
1Comunity Toilet
2Earth work in exacavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of exacavated earth as obtained to a distance up to 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all compelete as per approved design, building specification and direction of E/I.
3Extra for earth work in hard soil (vide classification of soil item-B ) as per specification and direction of E/I.
4Filling in foundation trenches and plinth in layers not exceeding 150 mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained from exacavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specifications and direction of E/I. (Mode of measurment compacted volume).
575% of Quantity vide Item no. 1
6Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
7Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.
8Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade- III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all compelete as per building specification direction of Engineer-in-charge.
9Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
10Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
11Providing designation 75 A Brick work in C.M. (1:6) in foundation and plinth withapproved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I.
12Providing 25 mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proof-ing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.
13Providing designation 75 A Brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints 15 mm depth, curing, taxes and royalty all compelete as per building specification and direction of E/I.
14Providing 125 mm thick reinforced designation 75 A Brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening, scaffolding, raking out joints to 15 mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all compelete as per building specification and direction of E/I.
15Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
16Providing av. 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in con-crete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but exclud-ing the cost of reinforcement) taxes, and royalty all complete as per building specification & direction of E/I.
17Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in beams of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
18Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
19Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in Stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.
20Providing 12 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
21Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
22Centering and shuttering including strutting, propping etc. and removal of form for Roof and Practical slab
23Centering and shuttering including strutting, propping etc. and removal of form for Beams and Plinth Beams
24Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers. Abutments, Posts and Struts
25Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc. including edges
26Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm. dia bars as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
2712&16mm
28Providing and laying Double Charge glazed ceramic floor tiles in different Sizes (thick ness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS: 15622/ISO 13006 of approoved make, in all colours and Shades,laid on 20 mm thick cement morter 1:4 (1 cement : 4 course Sand), jointing with grey cement Slury @3.3 kg/Sqm including grouting the joints with white cement and maching pigments etc. complete. 300 x 300 mm
29Providing and laying 6 mm ceramic glazed tiles in walls over 12 mm cement mortar(1:3) and jointed with gray cement slurry,flush pointed with white cement including rubbing,polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
30Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
31Providing 6 mm cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
32Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places as per specification and direction of E/I.
33Supplying, fitting and fixing M.S. grill including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
34Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on M.S. Angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
35Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I.
36Providing primer coat of red lead paint of approved make over new steel surface including prepairing the surface after cleaning,removing rust, dirt scales, smokes, grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.(Mode of measurment-Area shall be multiplied by the co-efficient as indicated in building specification.)
37Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.
38Supplying,fitting and fixing C.A.R.W.D. pipe with necessary strips, spikes, bends, shoes etc including cost of carriage all complete as per building specification and direction of E/I.100 mm dia.
39Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 Cement : 2 Coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & finishing the top smooth.
40Providing 250 mm wide brick drain in cement mortar (1:6) with av 150 mm clear depth and 250 mm apron including cost of E/W involved,with 75 mm cement concrete (1:4:8) over one brick designation 100 A flat soling in proper grade and slope at the base,the drain duly plastered in C.M (1:3 ) with punning over exposed surface all complete as per building specification direction of E/I.
41Carriage of following materials to work site (avg lead) including loading unloading and taking etc. all complete as per building specification and direction of E/I.
42(a) Bricks(Avg. Lead - 8 km )
43(b) Local sand (Avg. Lead - 3km )
44(c) Sand(Avg. Lead - 10 km )
45(d) Stone Chips(Avg. Lead - 22 km )
46Sanitary & Water Supply Works
47Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.
4815 mm dia
49Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I.
5025 mm dia
5132 mm dia
52Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.
53125 mm thick wall
54250 mm thick wall
55Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.
56Mirror (300 x 450mm)
57C.P. brass tower rail
58C.P. brass soap container medium quality with screw and hinges etc.
59Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long - With 12.5 lit. low level PVC cistern
60In Each W.C.
61Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.With 'P' trap - 12.5 lit low level PVC Cistern
62In Each W.C.
63Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
64Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
65Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.150mm dia
66Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark)
67Pillar cock
68bib cock
69Angular Stopcock /2 way bib cock
70Telephonic shower flexible pipe
71Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
7225 mm nominal outer dia Pipes
7332 mm nominal outer dia Pipes
74Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
7515 mm nominal outer dia Pipes
7620 mm nominal outer dia Pipes
77Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.
78Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
79With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
80WALL MIXER WITH TELEPHONIC SHOWER ANANGMENT (ISI MARKED)
81100 mm dia c.p shower
82water cooler (blue star 80lit)
83Sanitory Vanding machine
84Incinerator
85Septic Tank
86Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth as obtained to a distance upto 50m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shurbs all complete as per approved design building specification and direction of E/I.
87Extra for earth work in hard soil as per specification and direction of E/I.(vide classfication of soil item - B)
88Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(Mode of measurement compacted volume)
89Providing designation 75Bwork in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
90Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
91Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns,etc. for mass concrete
92Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
93Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
94Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
95Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Slab bottom,All side of slab
96Providing TMT steel reinforcement above 16mm to 36mm dia bars as per approved design and drawing excluding carriage of M.S. roads (Straight or in coils) to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
9710mm dia
9812mm dia
99Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I
100Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
101Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
102Carriage of Material
103Bricks Lead = 1 k+7 P(8km)
104Sand lead = 16 km
105Stone chips lead = 20 km
106Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.
107Group C
108Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.
109S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required
1105/6 amps, one way switch
1115/6 amps, 3 pin socket outlet
112S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required
113S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.
114ITC fluorescent fitting directly on surface:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
115ITC exhaust fan upto 450mm sweep - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required.
116Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
1178 way, single door
118Supplying and fixing 6 amps to 32 amps rating, 240 volts, \\"B\\" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required.
1196/32, single pole, \\"B\\" series
120S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
12140 amp
122Supplying and fixing of 9/10 Watt LED Bulb
123Supplying and fixing LED Batten (20/22W)
124Supply of 12\\" (300mm) metal exhaust fan
125Add 18 % GST
126Add 1% Labour Cess Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629394
AUTHORITY Government Departments
TENDER VALUE 53.83 Lakhs
LAST DATE 11-12-2026
Authority
Authority Name Department Of Education
Work Description Tender for Construction Of 20 Toilet And 20 Bath Complex At Kgbv Litipara Block -Litipara Dist-Pakur
Basic Detail
Tender No SSA/PKR/36/G-3/2026-27
Bidding Type Tender
Location
City Pakur
State Jharkhand
Key Dates
Publish Date 20 Nov 2026
Submission Date 11 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 53.83 Lakhs
Tender Fee 10000
EMD 1.08 Lakhs
Exemption Available
Document List
96f9aa2f-91b5-4fae-9745-6273778905bd.html
BOQ_164037.xls
TechnicalGr3.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 11, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

96f9aa2f-91b5-4fae-9745-6273778905bd.html

xls

BOQ_164037.xls

pdf

TechnicalGr3.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender