Tender For Construction Of 20 Toilet And 20 Bath Complex At Kgbv Maheshpur Block - Maheshpur Dist-Pakur
Tender Value
53.83 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
20 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pakur → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 20 Toilet And 20 Bath Complex At Kgbv Maheshpur Block - Maheshpur Dist-Pakur
BOQ
| Sl. No. | Item Description |
| 1 | Comunity Toilet |
| 2 | Earth work in exacavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of exacavated earth as obtained to a distance up to 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees shrubs all compelete as per approved design, building specification and direction of E/I. |
| 3 | Extra for earth work in hard soil (vide classification of soil item-B ) as per specification and direction of E/I. |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained from exacavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specifications and direction of E/I. (Mode of measurment compacted volume). |
| 5 | 75% of Quantity vide Item no. 1 |
| 6 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 7 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 8 | Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade- III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all compelete as per building specification direction of Engineer-in-charge. |
| 9 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing designation 75 A Brick work in C.M. (1:6) in foundation and plinth withapproved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I. |
| 12 | Providing 25 mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proof-ing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 13 | Providing designation 75 A Brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints 15 mm depth, curing, taxes and royalty all compelete as per building specification and direction of E/I. |
| 14 | Providing 125 mm thick reinforced designation 75 A Brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening, scaffolding, raking out joints to 15 mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all compelete as per building specification and direction of E/I. |
| 15 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing av. 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in con-crete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but exclud-ing the cost of reinforcement) taxes, and royalty all complete as per building specification & direction of E/I. |
| 17 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in beams of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 18 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in Stair case with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Providing 12 mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Roof and Practical slab |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for Beams and Plinth Beams |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers. Abutments, Posts and Struts |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc. including edges |
| 26 | Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm. dia bars as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 27 | 12&16mm |
| 28 | Providing and laying Double Charge glazed ceramic floor tiles in different Sizes (thick ness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS: 15622/ISO 13006 of approoved make, in all colours and Shades,laid on 20 mm thick cement morter 1:4 (1 cement : 4 course Sand), jointing with grey cement Slury @3.3 kg/Sqm including grouting the joints with white cement and maching pigments etc. complete. 300 x 300 mm |
| 29 | Providing and laying 6 mm ceramic glazed tiles in walls over 12 mm cement mortar(1:3) and jointed with gray cement slurry,flush pointed with white cement including rubbing,polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing 6 mm cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 32 | Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places as per specification and direction of E/I. |
| 33 | Supplying, fitting and fixing M.S. grill including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 34 | Supplying, fitting and fixing 20 gauge G.C.I. sheet gate fitted on M.S. Angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 35 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. |
| 36 | Providing primer coat of red lead paint of approved make over new steel surface including prepairing the surface after cleaning,removing rust, dirt scales, smokes, grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.(Mode of measurment-Area shall be multiplied by the co-efficient as indicated in building specification.) |
| 37 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I. |
| 38 | Supplying,fitting and fixing C.A.R.W.D. pipe with necessary strips, spikes, bends, shoes etc including cost of carriage all complete as per building specification and direction of E/I.100 mm dia. |
| 39 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 Cement : 2 Coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & finishing the top smooth. |
| 40 | Providing 250 mm wide brick drain in cement mortar (1:6) with av 150 mm clear depth and 250 mm apron including cost of E/W involved,with 75 mm cement concrete (1:4:8) over one brick designation 100 A flat soling in proper grade and slope at the base,the drain duly plastered in C.M (1:3 ) with punning over exposed surface all complete as per building specification direction of E/I. |
| 41 | Carriage of following materials to work site (avg lead) including loading unloading and taking etc. all complete as per building specification and direction of E/I. |
| 42 | (a) Bricks(Avg. Lead - 8 km ) |
| 43 | (b) Local sand (Avg. Lead - 3km ) |
| 44 | (c) Sand(Avg. Lead - 10 km ) |
| 45 | (d) Stone Chips(Avg. Lead - 22 km ) |
| 46 | Sanitary & Water Supply Works |
| 47 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I. |
| 48 | 15 mm dia |
| 49 | Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. |
| 50 | 25 mm dia |
| 51 | 32 mm dia |
| 52 | Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I. |
| 53 | 125 mm thick wall |
| 54 | 250 mm thick wall |
| 55 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 56 | Mirror (300 x 450mm) |
| 57 | C.P. brass tower rail |
| 58 | C.P. brass soap container medium quality with screw and hinges etc. |
| 59 | Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long - With 12.5 lit. low level PVC cistern |
| 60 | In Each W.C. |
| 61 | Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I.With 'P' trap - 12.5 lit low level PVC Cistern |
| 62 | In Each W.C. |
| 63 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 64 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 65 | Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.150mm dia |
| 66 | Approved basic rates construction materials for preparation of schedule of rates only, (Material should conform to relevent B.I.S. specification). The rates are inclusive of all taxes, royalty, cess and carraige but exclusive of contractor's profit and overhead charges -Special type of C.P. Bath room fitting for V.I.P. buildings (JAL, Jaguar, Marc or equivalent mark) |
| 67 | Pillar cock |
| 68 | bib cock |
| 69 | Angular Stopcock /2 way bib cock |
| 70 | Telephonic shower flexible pipe |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 72 | 25 mm nominal outer dia Pipes |
| 73 | 32 mm nominal outer dia Pipes |
| 74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. |
| 75 | 15 mm nominal outer dia Pipes |
| 76 | 20 mm nominal outer dia Pipes |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 78 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 79 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 80 | WALL MIXER WITH TELEPHONIC SHOWER ANANGMENT (ISI MARKED) |
| 81 | 100 mm dia c.p shower |
| 82 | water cooler (blue star 80lit) |
| 83 | Sanitory Vanding machine |
| 84 | Incinerator |
| 85 | Septic Tank |
| 86 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth as obtained to a distance upto 50m including all lifts, levelling, ramming the foundation trenches, removing roots of trees shurbs all complete as per approved design building specification and direction of E/I. |
| 87 | Extra for earth work in hard soil as per specification and direction of E/I.(vide classfication of soil item - B) |
| 88 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(Mode of measurement compacted volume) |
| 89 | Providing designation 75Bwork in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 90 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 91 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns,etc. for mass concrete |
| 92 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 93 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 94 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 95 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Slab bottom,All side of slab |
| 96 | Providing TMT steel reinforcement above 16mm to 36mm dia bars as per approved design and drawing excluding carriage of M.S. roads (Straight or in coils) to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 97 | 10mm dia |
| 98 | 12mm dia |
| 99 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I |
| 100 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 101 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 102 | Carriage of Material |
| 103 | Bricks Lead = 1 k+7 P(8km) |
| 104 | Sand lead = 16 km |
| 105 | Stone chips lead = 20 km |
| 106 | Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. |
| 107 | Group C |
| 108 | Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required. |
| 109 | S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required |
| 110 | 5/6 amps, one way switch |
| 111 | 5/6 amps, 3 pin socket outlet |
| 112 | S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required |
| 113 | S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required. |
| 114 | ITC fluorescent fitting directly on surface:- Installation, testing and commissioning of Pre-wired fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube etc.directly on surace or ceiling/ wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 115 | ITC exhaust fan upto 450mm sweep - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required. |
| 116 | Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) |
| 117 | 8 way, single door |
| 118 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, \\"B\\" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required. |
| 119 | 6/32, single pole, \\"B\\" series |
| 120 | S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 121 | 40 amp |
| 122 | Supplying and fixing of 9/10 Watt LED Bulb |
| 123 | Supplying and fixing LED Batten (20/22W) |
| 124 | Supply of 12\\" (300mm) metal exhaust fan |
| 125 | Add 18 % GST |
| 126 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender