Tender For Replacement/Bypass Of Damaged Underground Water Supply Line Near Hp Gas Agency To Near Hpsebl Temple At Bhabanagar And Construction Of Water Collection Chamber And Replacement Of Damaged Pipe At Water Source At Ponda .
Tender Overview
Project Description
Tender for Replacement/Bypass Of Damaged Underground Water Supply Line Near Hp Gas Agency To Near Hpsebl Temple At Bhabanagar And Construction Of Water Collection Chamber And Replacement Of Damaged Pipe At Water Source At Ponda .
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 100 mm dia nominal bore |
| 3 | Providing, welding and fixing of M.S.flanges at suitable reaches, conforming to table as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with GMS Pipes/ MSERW pipes in two layers on outer and one on inner faces to make the joint leak proof (The cost of providing and laying of GMS Pipes / MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts. |
| 4 | GMS Tubes as per IS :1239 - 1990/2004 of Medium Class welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816 -1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. Dia 100mm |
| 5 | Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 6 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain conrete work in. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender