Housing Urban and Rular Development Government Departments Closing in 2 days TDR #58629298

Tender For Name Of Work:- Repair &Maintenance Of Hp.Pwd., Sub-Division Building At Swarghat Tehsil Sh. Naina Devi Ji, Distt. Bilaspur Hp (Sh:- Repair Of Plasterin Patches, Glass Pane, Aluminium Work, Distempering, Painting And Finishing Walls With Wa

Issued by Government Departments · Bilaspur, Himachal Pradesh
Tender Value
5.90 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
11900
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Name Of Work:- Repair &Maintenance Of Hp.Pwd., Sub-Division Building At Swarghat Tehsil Sh. Naina Devi Ji, Distt. Bilaspur Hp (Sh:- Repair Of Plasterin Patches, Glass Pane, Aluminium Work, Distempering, Painting And Finishing Walls With Water Proofing Cement Paint, Water Proofing Treatment Etc. (Deposit Work).

BOQ

Name of Work:- NAME OF WORK:- Repair &Maintenance of HP.PWD., Sub-Division Building at Swarghat Tehsil Sh. Naina Devi Ji, Distt. Bilaspur HP (SH:- Repair of Plasterin patches, Glass pane, Aluminium Work, Distempering, painting and finishing walls with water proofing cement paint, water proofing treatment etc. (Deposit work).
Sl. No. Item Description
1Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST. 1.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15)
3For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
4Providing and fixing aluminium work for doors, windows,board flat pressed three layer or graded wood particleboard conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST 1. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
5Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm (Four millimetre) thickness (weight not less than 10 kg/ sqm) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
6Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm (one point Four millimetre) in both directions with wire of dia 0.63 mm (zero point Sixty Three) all complete. With 12 mm (Twelve millimetre) mild steel U beading including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
7Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeincluding carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.1. 300x16 mm ( Three Hundred into Sixteen milimeter)
8Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.1. 150x10 mm (One hundred Fifty into ten milimeter)
9100x10 mm (One hundred into ten milimeter)
10Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.1. 125 mm (one Hundred Twenty five milimeter)
11100mm (one Hundred milimeter)
12Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
13Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm (One Hundred Fifty millimetre) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
14Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessaryaccessories and screws etc. complete.ncluding carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
15Tile work in skirting, risers of steps and dado up to 2 m (Two metre) height over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (onecement :Three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cementmixed with pigment of matching shade complete.Marble tiles (polished) Raj Nagar 8mm (Eight millimetre) thick including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
16Distempering with 1st quality acrylic washable distemper (ready made) of approved having manufacture and of required shade and colour complete as per manufacturer specfication including applying a priming coat of approved steel primer. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
17Providing and laying Ceramic glazed floor tiles of size 300x300 mm (Three hundred into Three hundred milimeter) thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
18Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (Twenty millimetre) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (one cement: Four coarse sand) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
19Removing white or colour wash by scrapping and sand papering and preparing the surface smooth includingnecessary repairs to scratches etc. Complete including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
20Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
21Painting with synthetic enamel paint of approved brand and manufacture of required couler to give an even shade :one or more coats onold work including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
22Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete,W.C. pan with ISI marked white solid plastic seat and lid including cutting and making good the walls and floors wherever required. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
23Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty Two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm (Six Hundred Thirty into Four Hundred Fifty millimetre) with a pair of 15 mm (Fifteen millimetre) C.P. brass pillar taps including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
24Providing and fixing C.P Brass bib cock 15 mm (Fifteen Millimeter) dia nominal bore including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
25Providing and laying integral cement based treatment for of slabs by applying cement slurry mixed with waterproofing cement compound consisting of applying (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.(For the purpose of measurement the entire treated surface will be measured.) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
26Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (thirty centimeter) in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m (fifty meter) and lift upto 1.5 m, as directed by Engineer-in-charge. ordinary rock including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
27Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST
28Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering as per drawing and technical specification in C.C 1:3:6 (one Cement : Three coarse sand : six graded stone aggregate 20 mm (Twenty milimeter) nominal size) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST.
29Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approvedby Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. Thesheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate is including octroi, royality, toll tax, or other taxes imposed by the government excluding GST. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629298
AUTHORITY Government Departments
TENDER VALUE 5.90 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Name Of Work:- Repair &Maintenance Of Hp.Pwd., Sub-Division Building At Swarghat Tehsil Sh. Naina Devi Ji, Distt. Bilaspur Hp (Sh:- Repair Of Plasterin Patches, Glass Pane, Aluminium Work, Distempering, Painting And Finishing Walls With Water Proofing Cement Paint, Water Proofing Treatment Etc. (Deposit Work).
Basic Detail
Tender No 9404-10 dated 16-11-2026
Bidding Type Tender
Location
City Bilaspur
State Himachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 25 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 5.90 Lakhs
Tender Fee 350
EMD 11900
Exemption Available
Document List
56fe8c39-9dae-42aa-8a11-eb60a28274c5.html
BOQ_221812.xls
sbdswarghatpwd.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

56fe8c39-9dae-42aa-8a11-eb60a28274c5.html

xls

BOQ_221812.xls

pdf

sbdswarghatpwd.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender