Housing Urban and Rular Development Government Departments Closing in 5 days TDR #58629291

Tender For annual repair & maintenance of To Various N.R.B. Under Division No. Iii Shimla. (S.H:- Miscellaneous Repair Works On O/O Ee Design, Accounts Branch, Protection Works At Courtyard Of Winterfield Cottage.)

Issued by Government Departments · Shimla, Himachal Pradesh
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
10000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for annual repair & maintenance of To Various N.R.B. Under Division No. Iii Shimla. (S.H:- Miscellaneous Repair Works On O/O Ee Design, Accounts Branch, Protection Works At Courtyard Of Winterfield Cottage.)

BOQ

Name of Work:- A/R & M/O to various N.R.B. under Division No. III Shimla. (S.H:- Miscellaneous repair works on O/o EE Design, Accounts branch, Protection works at courtyard of Winterfield Cottage.)
Sl. No. Item Description
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge - All work up to plinth level:- 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size)
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
3Centering and shuttering including strutting, propping etc. and removal of form work for :(i) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads and lifts.
4Providing and fixing 19 mm thick commercial board in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts
5Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete)
6Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts.Second class chil/rai wood.
7Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts.
8Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts.
9Providing and fixing square edged cover fillets (beading) 40 x 12 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts.
10Providing and fixing magnetic catcher of approved quality in cupboard / wardrobe shutters, including fixing with necessary screws etc. complete.
11Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc. complete : 125 mm
12Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 mm
13Providing and fixing drawer lock of superior quality ( Godrej Make) fitting complete including carriage of materials in all leads and lifts.
14Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (i) 250x16mm
15Providing and Fixing Hydrolic door closer ISI Make. Heavy duty approved brand including carriage of materials within all leads and lifts.
16Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.
17Providing and fixing plain lining with 12 mm thick Commercial ply necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). including carriage of materials within all leads and lifts.(i) 12mm thick commercial ply
18Providing and fixing 4mm thick teak ply conforming to ISI in plain lining/panelling/under floors with necessary screws/nuts & bolts/ nails and fixed on wooden /steel frame work complete as per direction of Engineer-in- charge (Frame work shall be paid for separately) including carriage of materials within all leads and lifts.
19Providing and fixing high density fiberboard (HDF) in Flooring / wall lining Pre-laminated one side decorative and other side plain, having density of 800-1000 kg/m³ with necessary fixing arrangement and screws etc. complete including carriage of materials within all leads and lifts (i) 8mm Thick
20Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position 2nd class deodar wood including carriage of materials within all leads and lifts.
21Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (i) Granite Stone
22Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
23Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) complete including carriage of materials in all leads and lifts.
24Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)including carriage of materials within all leads and lifts
25Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts as per direction of Engineer-in-charge :- Plain Glass 5mm thick.
26Providing and fixing ACP. Sheet 4 mm Thick ceiling/Walls/ Doors/ Lining/ Panelling of approved quality with necessary nails etc. complete (frame work to be paid separately) including carriage of materials within all leads and lifts
27Providing and fixing PGI. Sheet in lining/ceiling with necessary screws/nuts & bolts/ nails and fixed on wooden /steel frame work complete as per direction of Engineer-in- charge (Frame work shall be paid for separately) including carriage of materials within all leads and lifts.
28Wall painting with extrerior Apexultima paint of approved brand and manufacture to give an even shade One or more coats on old work complete including carriage of materials within all leads and lifts.
29Painting one coat (excluding priming coat) on old wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping including carriage of materials within all leads and lifts in With white enemal paint.
30Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work complete including carriage of materials within all leads and lifts.
31Polishing two or more coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts.
32Painting wood work with Deluxe Multi Surface Paint of required shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts.
33Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials within all leads and lifts
34Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts in Readymixed paint brushing with white lead for priming.
35Painting Steel work with Deluxe Multi Surface Paint to give an even shade. one or more coat of approved brand and manufacture Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629291
AUTHORITY Government Departments
TENDER VALUE 4.99 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for annual repair & maintenance of To Various N.R.B. Under Division No. Iii Shimla. (S.H:- Miscellaneous Repair Works On O/O Ee Design, Accounts Branch, Protection Works At Courtyard Of Winterfield Cottage.)
Basic Detail
Tender No SD-III-18065-78dt.17-11-2026
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 4.99 Lakhs
Tender Fee 350
EMD 10000
Exemption Not Available
Document List
445ba866-21aa-46d2-9db3-cccf5d3e81d9.html
BOQ_221817.xls
SBD499505.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

445ba866-21aa-46d2-9db3-cccf5d3e81d9.html

xls

BOQ_221817.xls

pdf

SBD499505.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender