Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58629290

Tender For annual repair & maintenance of Various Residential Qtrs At Kasumpti, Shimla- 171009. (Sh:- Repair Of Kitchen, Toilet Gf, Toilet, Ff, Construction Of Servent Qtrs, Change Of Window , Flooring , Painting Distempering In Type-Vi Set No 8 At M

Issued by Government Departments · Shimla, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
33800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for annual repair & maintenance of Various Residential Qtrs At Kasumpti, Shimla- 171009. (Sh:- Repair Of Kitchen, Toilet Gf, Toilet, Ff, Construction Of Servent Qtrs, Change Of Window , Flooring , Painting Distempering In Type-Vi Set No 8 At Mehli , Kasumpti Shimla-171009 ). (Excluding Gst)

BOQ

Name of Work:- A/R & M/O various Residential Qtrs at Kasumpti, Shimla- 171009. (SH:- Repair of kitchen, Toilet GF, Toilet, FF, Construction of servent Qtrs, Change of window , flooring , Painting distempering in Type-VI Set no 8 at Mehli , Kasumpti Shimla-171009 ). (Excluding GST)
Sl. No. Item Description
1Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of prescribed charges of dumping to the owner of dumping site as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. (Excluding GST)
2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:2:4 (1 cement : 2 Coarse sand ) :4 Graded stone aggregate 20 mm nominal size (Excluding GST)
3Brick work with common burnt clay F.P.S (Non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:6 (One cement : six coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (Excluding GST)
4Half brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (Excluding GST)
515mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement Mortar 1:6 (one Cement: Six Sand). (Excluding GST)
6Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class deodar wood (Excluding GST)
7Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. (Excluding GST)
8Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick (ii) 2nd class deodar wood (Excluding GST)
9Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm (Excluding GST)
10Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i)Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (Excluding GST)
11Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:3:6 (One cement : Three coarse sand) : Six graded stone aggregate 20 mm nominal size) (Excluding GST)
12Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) Concealed work, including cutting chases and making good the walls etc. (i) 20 mm ( Forty milimetre) nominal outer dia Pipes . (Excluding GST)
13Providing and laying vitrified floor tiles of sizes 600x800 mm in Flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with High polymer modified quick set tile adhesive make / Asian / somany equivalent Type 2T etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 600x800mm (six hundred into six hundred milimetre) (Excluding GST)
14Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade 600x800, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge with Adhesive (Excluding GST)
15Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge (Excluding GST)
16Providing and fixing 15mm mixer for kitchen sink with top / bottom swinging spout. including carriage of materials in all leads as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
17Providing and fixing Venity HDHMR with S.S 304 hinges with wash basin and cp waste, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
18Providing and fixing one piece water closet ovel shaped white, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE Hinderware for equivalents.(Excluding GST)
19Providing and fixing hand faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
20Providing and fixing 100 mm sand cast Iron grating for gully trap, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
21Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. MAKE ESS ESS or Equivalent (Excluding GST)
22Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESSCO or Equivalent (Excluding GST)
23Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
24Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (E.S) MAKE Seiko or Equivalent (Excluding GST)
25Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore with 45 cm length MAKE VIKING or Equivalent (Excluding GST)
26Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32 mm dia MAKE VIKING or Equivalent (Excluding GST)
27Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
28Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESS ESS or Equivalent (Excluding GST)
29Providing and fixing overhead shower , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
30Providing and fixing overhead shower arm, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
31Providing and fixing divertor, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
32Providing and fixing upper SCLD HF, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
33Providing and fixing hand shower, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
34Providing and fixing Corner including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
35Providing and fixing C.P brass toilet paper holder within , including carriage of materials in all leads and lifts and other incidentals, as per directions of the Engineer-in-Charge. MAKE ESS ESS or Equivalent (Excluding GST)
36Providing and fixing 19mm thick water proof commercial board in shelves/shutters box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. HDMR Extenxa (Excluding GST)
37Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 9 mm (Nine milimetre) thick Extenxa (Excluding GST)
38Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
39Providing and fixing magnetic catcher , ISI marked , with necessary screw etc , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. The rates including octroi , royality , Malkana , toll tax , or other taxes imposed by Government but Excluding GST , including hauling of material. (Excluding GST)
40Providing and fixing SS handles , ISI marked , with necessary screw etc , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100 mm . The rates including octroi , royality , Malkana , toll tax , or other taxes imposed by Government but Excluding GST , including hauling of material. (Excluding GST)
41Providing and fixing beading 19x6 mm section i/c mitring junctions with wood screws and nails complete, including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST)
42Providing and fixing Hydraulic channel for drawer in cupboard including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
43Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST)
44Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work (Excluding GST)
45Wall painting with plastic emulusion paint of approved brand and manufacture to give an even shadewith including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) One more coats on old work (Excluding GST)
46Finishing wall with weather proof exterior grade emulsion of approved design Apexultima Protek) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST)
47Providing and fixing stainless steel Diamond kitchen sink duplex type (double drawl) with drain bpard of diamond or equivalent including C.I or M.S brackets painted with, including cutting holes and making good the same but excluding fitting including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 600mm x 450mm x 150mm (Excluding GST)
48Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings , frames , guard bar , lasser, railing , brackets , gates and similar works. (Excluding GST)
49Provdiing and fixing polycarbonated transparent sheet 2mm thick in roofing with galvanised J and L hooks bolts and nuts with G.I Limpet and bitumen rubber washer complete with all accessories as requires, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
50Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (Excluding GST)
51Providing and fixing ridges or hips 60 cm (Sixty centimeter) over rall with 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge (Excluding GST)
52Providing and fixing flushing 38cm overall with 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted G.I. limpet and bitumen washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge (Excluding GST)
53Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) (Excluding GST)
54Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing thetrap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to bemeasured and paid for separately) including carriage of materials in all leads as per directions of the Engineer-in-Charge (i) One piece EWC MAKE JAGUAR or Equivalent (Excluding GST)
55Providing and fixing plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. White plastic seat and Cover MAKE ESSCO or Equivalent (Excluding GST)
56Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 10 litre capacity - White MAKE ESSCO or Equivalent (Excluding GST)
57Providing and fixing factory made PVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0mm , corners of the door frame to be jointed with galvanized brackets and stainless steel screwa, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by glavanized M.S tube of size 19x19 mm and 1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-Charge.(Excluding GST)
58Providing and Fixing HDF Laminate wooden flooring 32/AC-4 placed on cushion of 2 mm thick expanded poly thene foam 100 micron thick polythene under layer i/c boarder of required shade and coular complete in all respect, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2mm thick. (Excluding GST)
59Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws or nail (frame work and cover fillets to be measured and paid for separetely) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 4 mm thick (Excluding GST)
60Providing and Fixing Schieber inotech drawer system 500 mm IT4 , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
61Providing and Fixing Schieber inotech drawer system 500 mm IT6 , complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
62Providing and Fixing K-BPO 6 wire bottler pollout 6x20x18, complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)
63Providing and fixing Dish rack 70 mm 28\\" including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629290
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 28-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for annual repair & maintenance of Various Residential Qtrs At Kasumpti, Shimla- 171009. (Sh:- Repair Of Kitchen, Toilet Gf, Toilet, Ff, Construction Of Servent Qtrs, Change Of Window , Flooring , Painting Distempering In Type-Vi Set No 8 At Mehli , Kasumpti Shimla-171009 ). (Excluding Gst)
Basic Detail
Tender No SD-I-CTR-Tender-2026- 23081 dt 19-11-2026
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 28 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 33800
Exemption Not Available
Document List
BOQ_221670.xls
ConditionVIII.pdf
fd44159d-595b-4dd6-856e-157d3e8b848a.html
SBD1686934.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_221670.xls

pdf

ConditionVIII.pdf

html

fd44159d-595b-4dd6-856e-157d3e8b848a.html

pdf

SBD1686934.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender