Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58629285

Tender For Repair/Renovation To Various Residential Buildings Under Division No.-Iii, Shimla (Sh:- Laying Floor Tiles & Wall Tiles , Plumbing Work & Providing & Fixing Wooden Cupboards In Enquiry/ Store At Brockhurst Section Balance Work)

Issued by Government Departments · Shimla, Himachal Pradesh
Tender Value
6.43 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
12880
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Renovation To Various Residential Buildings Under Division No.-Iii, Shimla (Sh:- Laying Floor Tiles & Wall Tiles , Plumbing Work & Providing & Fixing Wooden Cupboards In Enquiry/ Store At Brockhurst Section Balance Work)

BOQ

Name of Work:- Repair/Renovation to various residential buildings under Division no.-III, Shimla (SH:- Laying Floor Tiles & Wall Tiles , Plumbing Work & Providing & Fixing Wooden Cupboards in Enquiry/ Store at Brockhurst Section balance work)
Sl. No. Item Description
1Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials in all leads and lifts
26mm Cement plaster to ceiling in Cement mortar 1:3 (1 Cement:3 Sand) including carriage of materials within all leads and lifts.
315mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth InCement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts.
4Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class deodar wood
5Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position.Rae/chill wood. including carriage of materials in all leads.
6Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) 2nd Deodar wood wood 40 mm thick shutters.
7Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. chil/raiwood
8Providing and fixing 40x6 mm size square edge cover fillet wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. in 2nd class teak wood complete including carriage of materials within all leads and lifts.
9Providing and fixing wire gauge shutters using galvanised M.S. wire guage of IS. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey wondows including bright finished black namelled iron hinges with necessary screws etc. complete including carrage of material within all leads and lifts. 40 mm thick in 2nd class deodar wood.
10Providing and fixing 9 mm thick ply wood ceiling/lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) inclding carriage of materials within all leads and lifts.
11Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts.
12Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts
13Providing and fixing 1.0 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts.
14Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts.
15Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the anufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm includ
16Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm.
17Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
18Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i)110 mm dia
19Providing & Fixing 110mm nominal size PVC finolex plain bend ISI marked complete including carriage of materials within all leads and lifts
20Providing & Fixing pvc coller 110 mm ISI marked complete including carriage of materials within all leads and lifts
21Providing & Fixing Floor Trap 110 x 75 mm ISI marked complete including carriage of materials within all leads and lifts
22Providing and fixing wall ceiling floor CPVC pipe (heavy duty) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials within all leads and lifts. 15mm nominal bore
23Providing and fixing 15mm thick single hole basin mixer of approved quality including carriage of materials within all leads and lifts.
24Providing and fixing ESSCO wall mixer without telephonic arrangement of approved quality including carriage of materials within all leads and lifts.
25Providing and fixing ESS-ESS Bib cock with flange of approved quality 15mm nominal bore including carriage of materials in all leads and lifts Cat no. T-103D
26Providing and fixing 15mm dia C.P.brass angle cock including carriage of materials within all leads and lifts.
27Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. screws and washer including carriage of materials within all leads and lifts.
28Providing and fixing Ess-Ess Towel ring complete with Brass brackets fixed to wooden plugs with screws including carriage of materials within all leads and lifts. Of Cat no.-SQTW201
29Providing and fixing Acrylic corner shelf 3in 1 with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts
30Providing and fixing Ess-Ess Soap dish complete with brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts. Cat no.AC-103
31Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
32Providing and fixing vitreous china (CERA) Single piece EWC with slim soft close seat cover and fittings size 685x360x720mm cat no.S1013164
33Providing and fixing 8 mm dia hand Jet jenus with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge
34Providing and fixing PVC water storage tank of ISI : 12701 marked/ PVC Sintex or equivalent, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials within all leads and lifts.
35Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 75mm dia
36Providing & Fixing PVC finolex 75 mm Coller ISI marked complete including carriage of materials within all leads and lifts
37Providing & Fixing PVC finolex 75 mm Plain Tee ISI marked complete including carriage of materials within all leads and lifts
38Providing & Fixing Gate valve with powder coated lever complete 15mm nominal dia
39Providing and Fixing float ball valve low or high pressure 15 mm bore
40Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
41Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
42Wall painting with plastic emulsion paint of approved One or more coats on old work brand and manufacture to give an even shade:
43Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied of approved brand and manufacture
44Providing and fixing stainless steel kitchen Sink 610mm X 460mm with bowl depth 200 mm size kitchen sink with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts.
45Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials within all leads and lifts.
46Providing and fixing C.P. waste for sink or wash basin including .complete. Semi rigid pipe 32 mm dia including carriage of materials in all leads and lifts. Ess Ess cat no. C-230F
47Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia. including carriage of materials within all leads and lifts.
48Constructing masonry Chamber 60x60x75 cm inside in brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve , with C.I surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 ,i/c necessary excavation , foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement complete as per standard dessign : with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5
49Melamine polishing on wood work (one or more coat).including carriage of materials within all leads and lifts.as per direction of Engineer-in-Charge
50Providing and fixing 12 mm thick commercial ply of standard quality ISI mark and approved shade and colour in panelling and wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured and paid for separately) including carriage of materials within all leads and lifts
51Providing and fixing 12mm thick imported pine wood ceiling/panelling with tongued and groove jointing of approved size, shade and colour including mitring at junctions, butt jointing with screws and nails complete (frame work for base to be measured & paid for separately) including carriage of material within all leads & lifts
52Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
53Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
54Providing and laying Polished Grainite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.comlete including carriage of materials within all leads and lifts.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
55Providing and fixing .PVC. connection pipe with brass union including carriage of materials within all leads and lifts :-300/450mm length :-15mm nominal bore. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58629285
AUTHORITY Government Departments
TENDER VALUE 6.43 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Repair/Renovation To Various Residential Buildings Under Division No.-Iii, Shimla (Sh:- Laying Floor Tiles & Wall Tiles , Plumbing Work & Providing & Fixing Wooden Cupboards In Enquiry/ Store At Brockhurst Section Balance Work)
Basic Detail
Tender No SD-III-18065-78dt.17-11-2026
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 6.43 Lakhs
Tender Fee 350
EMD 12880
Exemption Not Available
Document List
01eccf32-f999-4552-87b2-2895bedf2839.html
BOQ_221816.xls
SBD643938.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

01eccf32-f999-4552-87b2-2895bedf2839.html

xls

BOQ_221816.xls

pdf

SBD643938.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender