Tender For Tender For Renovation Of Satichaura Cremation Ground At Kataka In The Disctrict Of Kataka, Odisha
Tender Value
6.46 Crore
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
12.93 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Renovation Of Satichaura Cremation Ground At Kataka In The Disctrict Of Kataka, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | TENDER FOR RENOVATION OF SATICHAURA CREMATION GROUND AT KATAKA IN THE DISCTRICT OF KATAKA, ODISHA TENDER FOR RENOVATION OF SATICHAURA CREMATION GROUND AT KATAKA IN THE DISCTRICT OF KATAKA, ODISHA NIT No.: EPI/PCO/BBSR/962/271 Dt: 19.11.2026 Sl. No. Description of Works Amount in Rs. |
| 2 | PART-A SATICHAURA CREMATION GROUND A SHIVA STATUE 1571013.43 B COMPOUND WALL 2202201.67 C ENTRY RAMP (2 Nos) 441734.84 D BURNER (6 Nos) 13854491.04 E BURNER AREA BASE 2677798.69 F WAITTING HALL (SMALL) 3065349.73 G PAVER 2954396.42 H POND 1500429.35 I LANDSCAPE 2889070.72 J WAITNG HALL(LARGE) 3633934.58 K TOILET 1193556.3 L SHOWER ROOM 1071158.55 M DRAIN 2261843.72 N DUMPING PIT 112060.07 O OLD TOMB STONE 5595104.01 P WALL OF NAMES 791250.45 Q GUARD ROOM 827650.72 R WOOD ROOM 947922.02 S DISMANTLING 456822.85 T GATEWAY 2999977.56 U GFRC BENCH 700000.0 V PH WORKS 5174513.81 W ELECTRICAL WORKS 7749564.15 TOTAL 64671844.68 TOTAL (SAY) 64671845.0 Rupees: Six Crore Forty Six Lakh Seventy One Thousand Eight Hundred & Forty Five Only TENDER FOR RENOVATION OF SATICHAURA CREMATION GROUND AT KATAKA IN THE DISCTRICT OF KATAKA, ODISHA NIT No.: EPI/PCO/BBSR/962/271 Dt: 19.11.2026 Sl.No Description of Items Qnty Unit Rate (per unit) Amount (in Rs.) PART-A SATICHAURA CREMATION GROUND SHIVA STATUE |
| 3 | Earth work in all kinds of soil in excavation of foundation trenches including cost of all labour, T&P etc. complete as per the design & specification. |
| 4 | Filling in foundation and plinth with sand( including cost of sand & labour) as per the design & specification. |
| 5 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per the design & specification. |
| 6 | R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the design & specification. i Foundation 4.22 Cum 6856.76 28935.53 ii Column 2.38 Cum 18679.01 44456.04 iii Plinth beam 3.908 Cum 7731.17 30213.41 iv Stair 1.65 Cum 16101.79 26567.95 |
| 7 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the design & specification. |
| 8 | Fly ash Brick masonry in CM(1:6) in F&P including all cost of labour, T&P etc. complete as per the design & specification. Plinth Wall 2.605 Cum 6538.5 17032.79 |
| 9 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. Statue Base 12.66 Cum 5564.2 70442.77 |
| 10 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc. complete as per the design & specification. |
| 11 | Fixing Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 12 | Priming one coat with any approved wall primer including cost of all labour ,materials T&P with taxes ,transportation etc all complete( Wall primer) as per the design & specifiction. |
| 13 | Painting Two Coats With Weather Seal Coat over a coat of water bound wall primer.etc complete as per the design & specification. |
| 14 | Supplying & fixing of Siva Statue including cost of all materials, labours etc. complete as per specification & direction of Engineer-in-charge as per the design & specification. Sub Total 1571013.43 COMPOUND WALL |
| 15 | Cement Concrete (1:3:6) with 4cm size B,H,C,B,Gr metal ( including watering, curing with cost, conveyances, taxes of all materials and cost of all labour T&P etc. complete as per the design & specification. Boundry Top Concrete (Coping) 6.6 Cum 6357.3 41958.18 |
| 16 | R.C.C M-20 with 20mm & down graded size B,H,C,B,Gr chips including watering, curing with cost, conveyances, taxes of all materials and cost of all labour T&P etc. complete as per the design & specification. Column 16.5 cum 18679.01 308203.67 Lintel 9.56 cum 14570.49 139293.88 |
| 17 | Reinforcement including watering, curing with cost, conveyances, taxes of all materials and cost of all labour T&P etc. complete as per the design & specification. |
| 18 | Fly Ash Brick masonry in cement mortar (1:6) in Superstructure in all floors including watering, curing with cost, conveyances, taxes of all materials and cost of all labour, T&P etc. complete as per the design specification. C.Wall 152.91 cum 5564.2 850821.82 |
| 19 | 16mm Thick Cement Plaster in Prop.(1:6).(For outside Surface of Wall) including cost conveyances etc. complete and as per the design & specification. |
| 20 | Supplying Fitting & fixing of Ms grill/grill gate etc complete as per the design & specification. |
| 21 | Priming one coat with any approved wall primer including cost of all labour ,materials T&P with taxes ,transportation etc all complete( Wall primer) as per the design & specification. |
| 22 | Painting Two Coats With Weather Seal Coat including cost conveyances etc. complete and as per the design & specification. Sub Total 2202201.67 ENTRY RAMP |
| 23 | Earth work in all kinds of soil in excavation of foundation trenches including cost of all labour, T&P etc. complete as per the design & specification. |
| 24 | Filling in foundation and plinth with sand( including cost of sand & labour) as per the design & specification. |
| 25 | Providing & laying cement concrete of prop (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per the design & specification. |
| 26 | Providing fitting & fixing of Paver Block 60mm over 50mm thick sand layer etc complete as per the design & specification. |
| 27 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as per the design & specification. Sub Total 220867.42 Sub Total 2 nos. Ramp 441734.84 BURNER |
| 28 | Earth work in all kinds of soil in excavation of foundation trenches including cost of all labour, T&P etc. complete as per the deign & specification. |
| 29 | Filling in foundation and plinth with sand( including cost of sand & labour)as per the design & specification. |
| 30 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per the design & specification. |
| 31 | R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the design & specification. ii Column 1.25 Cum 18679.01 23348.76 iii Plinth beam 2.3 Cum 7731.17 17781.69 iv Roof beam 2.55 Cum 18679.01 47631.48 v Roof Slab 0.49 Cum 14173.93 6945.23 vi. Lintel 0.77 Cum 14570.49 11219.28 |
| 32 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of Engineer-in Charge as per the design & specification. |
| 33 | Fly Ash Brick masonary in cement mortar (1:6) in Foundation & Plinth using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 34 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 35 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 36 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc. complete as per the design & specification. |
| 37 | Providing 6mm thick cement plaster in cement mortar (1:4) to ceiling plaster including cost of all materials, labour etc complete. as per the design & specification. |
| 38 | Fixing Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 39 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 40 | Wall Painting one Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 41 | Wall painting 2 coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 42 | GFRC Decorative Slab |
| 43 | Burner Sub Total 2309081.84 Sub Total 6 nos of burners 13854491.04 BURNER AREA BASE |
| 44 | Earth work in all kinds of soil (Oridinary + Hard + Stony+ Slushy). |
| 45 | Filling in foundatin and plinth with sand( including cost of sand & labour). |
| 46 | CC(1:3:6) with 4cm.crusher brokn Granite metal . |
| 47 | RCC work M20 with 20 mm and down graded size black hard grinite ( crusher broken ) stone chips including hoisting,lowering & laying concrete & compacting by using vibrator watering & curing for 4 weeks including cost & conveyance, royalties & taxes of all materials & labour required for the work etc complete with all T & P in all respect but excluding cost & conveyance of M.S rods & binding wires & tying the grills & placing in proper position. i. Foundation 13.18 Cum 6856.76 90372.1 ii. Column 0.75 Cum 18679.01 14009.26 iii. Plinth Beam 20.87 Cum 7731.17 161349.52 iv. Stair 6.59 Cum 16101.79 106110.8 |
| 48 | Supplying, fitting and placing uncoated HYSD bar. |
| 49 | 25 cm F.Ash Brick in CM (1:6) BGL. |
| 50 | 25 cm F.Ash Brick work in CM (1:6). |
| 51 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc. complete as per the design & specification. |
| 52 | Fixing unfinished Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 53 | RCC Hume Pipe 300 mm dia 4.0 497.1 1988.4 600 mm dia 100.0 1166.2 116620.0 Sub Total 2677798.69 WAITTING HALL (SMALL) |
| 54 | Earthwork in excavation for Foundation trench in all kinds of soil including all cost of labour, T&P etc. complete as per the design & specification. |
| 55 | Sand Filling in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 56 | PCC(1:3:6) using 25mm down size metal including all cost of labour, T&P etc. complete as pet the design & specification. |
| 57 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. Wall 9.59 Cum 11919.8 114310.88 Column 3.29 Cum 18679.01 61453.94 |
| 58 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 59 | Fitting & fixing of Alluminium coated of TATA Brand 0.47mm thick GCI sheet in roofing etc complete as per the design & specification. |
| 60 | Iron Work in trosses & racks including fabrication works Hoisting,Cutting & weilding.etc completeas per the design & specification. |
| 61 | Providing Vitrified tile (600mmX600mm) size plain Ivory over 20mm thick cement mortar (1:4) including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specificartion. Sub Total 3065349.73 Pavers |
| 62 | Earth work in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulder requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring shuttering dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as per the design & specification. |
| 63 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of all labour, T&P etc. as per the design & specification. |
| 64 | Providing & laying cement concrete of prop (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per the design & specification. |
| 65 | Providing fitting & fixing of Paver Block 80mm over 50mm thick sand layer etc complete as per the design & specification. |
| 66 | Providing cement concrete (1:2:4) by using 12mm to 20mm size hard granite chips (cb) grade including centring and shuttering cost, conveyance & royalty of all materials etc.complete as per the design & specification. |
| 67 | Painting two coats weather coats with approved quality and shade over the primed surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the design & specification. Sub Total 2954396.42 POND |
| 68 | Clearing of weeds, shrubs & reshaping of the tank. |
| 69 | Earth work in excavation in foundation in all kinds of soil. |
| 70 | Filling foundation & plinth with sand (Data for 100.00 Cum). |
| 71 | Cement Concrete (1:3:6) with 4cm size B,H,H,B,Gr metal (A/R Page 43 Item No.3). |
| 72 | R.C.C M-20 with 20mm & down graded size B,H,C,B,Gr chips. |
| 73 | Cutting, Bending, Binding M/S Rod / Tor Steel. |
| 74 | Fly Ash Brick Masonary in CM (1:6) using Fly Ash Bricks of size( 25cmx12cmx8cm). |
| 75 | Laterite Stone Masonary (1:4). |
| 76 | Cement Flush Pointing in Prop.(1:3) Over Stone Work. |
| 77 | RCC Hume Pipe(NP-3) (New)Spigot and Socket joint pipes. 450 mm dia hume pipe. 135.0 Rmt 741.1 100048.5 Total 1500429.35 LANDSCAPE |
| 78 | Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit etc complete as per the design & specification. Girth from 300 mm to 600 mm 1.0 Nos 364.12 364.12 Girth from 600 mm to 900 mm 1.0 Nos 614.7 614.7 Girth from 900 mm to 1800 mm 1.0 Nos 1244.19 1244.19 |
| 79 | Clearing and grubbing road land including uprooting rank vegetation, grass,bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removaland disposal of top organic soil not exceeding 150 mm in thickness as per the design & specification. |
| 80 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of all labour, T&P etc. as per the design & specification. |
| 81 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment) as per the design & specification. |
| 82 | Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment) etc complete as per the design & specification. |
| 83 | Rough dressing the trenched ground including breaking clods as per the design & specification. |
| 84 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation as per the design & specification. |
| 85 | Fine dressing of the ground eetc complete as per the design & specification. |
| 86 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately) etc complete as per the design & specification. |
| 87 | Mixing earth and sludge or manure in the required proportion specified etc complete as per the design & specification. |
| 88 | Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free fromweeds and fit for mowing including cost of grass and supplying good earth, if needed(the good earth shall be paid for separately) etc complete as per the design & specification. |
| 89 | Planting of Ornamental spp/ (21\\" X 21\\") poly pack: Digging pits removing all unserviceable materials and dumping outside the working area as shown by the Officer-in-Charge and filling the same pits with supplied well decomposed cow-dung manure mixture of ratio 4:1 and required quantities of fertilizer, Pesticides, Supply of planting material with specified saplings, taking up maintenance over 1 month, work like watering, weeding application of fertilizer, pesticides etc. including cost of men, material, tackles all complete as per the design & specification. |
| 90 | Planting of Ornamental spp/ (25\\" X 25\\") poly pack: Digging pits removing all unserviceable materials and dumping outside the working area as shown by the Officer-in-Charge and filling the same pits with supplied well decomposed cow-dung manure mixture of ratio 4:1 and required quantities of fertilizer, Pesticides, Supply of planting material with specified saplings, taking up maintenance over 1 month, work like watering, weeding application of fertilizer, pesticides etc. including cost of men, material, tackles all complete as per the design & specification. |
| 91 | Planting of Ornamental spp/ (17\\" X 18\\") poly pack: Digging pits removing all unserviceable materials and dumping outside the working area as shown by the Officer-in-Charge and filling the same pits with supplied well decomposed cow-dung manure mixture of ratio 4:1 and required quantities of fertilizer, Pesticides, Supply of planting material with specified saplings, taking up maintenance over 1 month, work like watering, weeding application of fertilizer, pesticides etc. including cost of men, material, tackles all complete as per the design & specification. Total 2889070.72 WAITTING HALL (LARGE) |
| 92 | Earth work in excavation in foundation in all kinds of soil as per the design & specification. |
| 93 | Sand Filling in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 94 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. etc complete as per the design & specification. |
| 95 | Fly Ash Brick masonary in cement mortar (1:6) in Foundation & Plinth using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 96 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 97 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. (A) Foundation 1 17.39 Cum 6856.7628540151 119239.106031323 (B) Column 11.25 Cum 18679.0129742795 210138.895960644 (C)Plinth Beam 10.625 Cum 7731.1735479281 82143.7189467361 (B)Roof beam 13.62 Cum 18679.0129742795 254408.156709687 (C)Lintel 5.03 Cum 14570.4920309956 73289.5749159079 (D) Chajja 6.84 Sqm 1267.44 8669.2896 (E) Roof Slab 30.3 Sqm 14173.9303180542 429470.088637042 (F) Stair Case 3.99 cum 16101.7939141638 64246.1577175136 |
| 98 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 99 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 100 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 101 | Providing Vitrified tile (600mmX600mm) size plain Ivory over 20mm thick cement mortar (1:4) including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specificartion. |
| 102 | UPVC sliding window of size 1220mm x 1372mm 2 track 2 pannel of FINESTA make & 5mm clear glass etc complete.as per the design & specification. |
| 103 | Supplying, fitting & fixing Factory Made 30mm Flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick approved sunmica of Century/ Mayur make or similar type with seven years guarantee against termite & border etc with both sides complete with cost, conveyances, taxes of all materials & Aluminium fittings, labour, T&P etc. complete as per the design & specification. |
| 104 | Providing, fitting & fixing of Dressed seasoned Sal wood choukath (5\\"X2 1/2\\") including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 105 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 106 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 107 | Wall painting 2 coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 108 | Painting 2 coats with Synthetic Enamel paint to new wood work over a coat of wood primer including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Total 3633934.58 TOILET |
| 109 | Earth work in excavation in foundation in all kinds of soil as per the design & specification. |
| 110 | Filling foundation & plinth with sand (Data for 100.00 Cum) as per the design & specification. |
| 111 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. etc complete as per the design & specification. |
| 112 | Fly Ash Brick masonary in cement mortar (1:6) in Foundation & Plinth using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. Brick masonry under outerline wall 4.42 Cum 6538.5 28900.17 |
| 113 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 114 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. (A)Foundation 8.07 cum 6856.7628540151 55334.0762319019 (B) Column 4.95 cum 18679.0129742795 92461.1142226835 (C)Plinth Beam 1.91 cum 7731.1735479281 14766.5414765427 (D)Roof Beam 1.91 cum 18679.0129742795 35676.9147808738 (E)Lintel 1.19 cum 14570.4920309956 17338.8855168848 (F)Chajja 3.6 sqm 1267.44 4562.784 (G)Stair 0.22 Cum 16101.7939141638 3542.39466111604 |
| 115 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 116 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 117 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 118 | Providing Vitrified tile (600mmX600mm) size plain Ivory over 20mm thick cement mortar (1:4) including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification |
| 119 | Ceramic wall Tiles (20cm X 30cm)/(20cmx20cm) having thick ness plain/printed series of 6.5mm to 6.7 mm confirming to IS 13753 etc complete as per the design & specification. |
| 120 | Providing fixing UPVC Ventilator (10\\" X 10\\") Fan. |
| 121 | Fixing Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 122 | Fitting & fixing of Alluminium coated of TATA Brand 0.47mm thick GCI sheet in roofing etc complete as per the design & specification. |
| 123 | Iron Work in trosses & racks including fabrication works Hoisting,Cutting & weilding.etc complete as per the design & specification. |
| 124 | Supplying, fitting & fixing Factory Made 32mm Flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick approved sunmica of Century/ Mayur make or similar type with seven years guarantee against termite & border etc with both sides complete with cost, conveyances, taxes of all materials & Aluminium fittings, labour, T&P etc. complete as per the design & specification. |
| 125 | Providing, fitting & fixing of Dressed seasoned Sal wood choukath (5\\"X2 1/2\\") including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 126 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 127 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 128 | Wall painting 2 coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 129 | Painting 2 coats with Synthetic Enamel paint to new wood work over a coat of wood primer including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Total 1193556.3 WAITTING HALL SHOWER & WATER TANK |
| 130 | Earthwork in excavation for Foundation trench in all kinds of soil including all cost of labour, T&P etc. complete as per the design & specification. |
| 131 | Filling foundation & plinth with sand (Data for 100.00 Cum) as per the design & specification. |
| 132 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge as per the design & specification. |
| 133 | Fly Ash Brick masonary in cement mortar (1:6) in Foundation & Plinth using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 134 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 135 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. (A)Foundation 9.01 cum 6856.7628540151 61779.433314676 (B) Column 4.97 cum 18679.0129742795 92834.6944821691 (C)Plinth Beam 3.91 cum 7731.1735479281 30228.8885723989 (D)Roof beam 3.91 cum 18679.0129742795 73034.9407294328 (E)Lintel 0.98 cum 14570.4920309956 14279.0821903757 (F)Chajja 2.16 sqm 1267.44 2737.6704 |
| 136 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 137 | Fitting & fixing of Alluminium coated of TATA Brand 0.47mm thick GCI sheet in roofing as per the design & specification. |
| 138 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 139 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 140 | Iron Work in trosses & racks including fabrication works Hoisting,Cutting & weilding.etc completeas per the design & specification. |
| 141 | Supplying, fitting & fixing of Vitrified Floor Tiles of Premium grade having thickness of 8mm to with white cement etc. complete. 10mm confirming to IS 13756 over Polimer modified adhesive bed & finishing joints |
| 142 | Ceramic wall Tiles (20cm X 30cm)/(20cmx20cm) having thick ness plain/printed series of 6.5mm to 6.7 mm confirming to IS 13753 etc complete as per the design & specification. |
| 143 | Providing fixing UPVC Ventilator of 2 track 2 pannel of 5mm thik clear glass of approved quality including all cost etc. comple as per diection of Engineer-In-Charge etc complete as per the design & specification. |
| 144 | Supplying, fitting & fixing Factory Made 32mm Flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick approved sunmica of Century/ Mayur make or similar type with seven years guarantee against termite & border etc with both sides complete with cost, conveyances, taxes of all materials & Aluminium fittings, labour, T&P etc. complete asper the design & specification. |
| 145 | Providing, fitting & fixing of Dressed seasoned Sal wood choukath (5\\"X2 1/2\\") including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 146 | Providing, fitting & fixing of W.I. Clamps 33cm to 38cm long of 35mmX5mm size in C.C. (1:3:6) for doors & windows and ventilators including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 147 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Over Interior surface 0.0 |
| 148 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Area vide item No.11 0.0 |
| 149 | Wall painting 2coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 150 | Painting 2 coats with Synthetic Enamel paint to new wood work over a coat of wood primer including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Total 1071158.55 DRAIN |
| 151 | Earth work in excavation of foundation and trenches in all kinds of soil including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering if required etc. complete as per the design & specification. |
| 152 | Supplying and filling foundation and plinth with sand well watered and rammed with cost, conveyance, royalties and taxes of all materials complete (Measurement to be taken on compacted section only) etc complete as per the design & specification. |
| 153 | Cement concrete (1:3:6) in foundation with 40mm hgcb metal in foundation & plinth etc complete as per the design & specification. |
| 154 | R.C.C M25 using 12mm cb chips in raft including centering shuttering as per direction of EIC etc complete as per the design & specification. |
| 155 | R.C.C M25 using 12mm cb chips in wall including centering shuttering as per direction of EIC etc complete. As per the design & specification. |
| 156 | R.C.C M25 using 12mm cb chips in slab including centering shuttering as per direction of EIC etc complete as per the design & specification. |
| 157 | Suppling cutting bending binding & tying the grill of HYSD bar etc complete as per the design & specification. |
| 158 | Transporting the excavated materials with all leads & lifts by mechanical means withen 5km. lead including cost, conveyance all T&P and cost of all labour as required for the work etc. complete as per the design & specification. TOTAL 2261843.7195 DUMPING PIT |
| 159 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete. |
| 160 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc. complete as per the design & specification. |
| 161 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board. 112060.07 TOMB STONE |
| 162 | Earth work in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulder requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring shuttering dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as per the design & specification. |
| 163 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of all labour, T&P etc. as per the design & specification. |
| 164 | CC(1:3:6) with 4cm.hand broken Granite metal. |
| 165 | Providing & laying cement concrete of prop (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per the design & specification. |
| 166 | RCC work M20 with 20 mm and down graded size black hard granite ( crusher broken ) stone chips including hoisting,lowering & laying concrete & compacting by using vibrator watering & curing for 4 weeks including cost & conveyance, royalties & taxes of all materials & labour required for the work etc complete with all T & P in all respect but excluding cost & conveyance of M.S rods & binding wires & tying the grills & placing in proper position. (A) Foundation 8.93 Cum 6856.7628540151 61230.8922863548 (B) Column 0.98 Cum 18679.0129742795 18305.4327147939 (C) Beam 2.56125 Cum 18679.0129742795 47841.6219803734 (D) Stair 55.32 Cum 16101.7939141638 890751.239331541 |
| 167 | Supplying, fitting and placing uncoated HYSD bar. |
| 168 | Fixing Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 169 | Decorative GFRC Tomb stone as per the design & specification. Total 5595104.01 WALL OF NAMES |
| 170 | Earth work in all kinds of soil in excavation of foundation trenches including cost of all labour, T&P etc. complete as per the design & specification. |
| 171 | Filling in foundation and plinth with sand( including cost of sand & labour) as per the design & specification. |
| 172 | Providing & laying cement concrete of prop (1:3:6) using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge as per the design & specification. |
| 173 | R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of Engineer-in Charge as per the design & specification. i Foundation base 5.24 Cum 6856.76 35929.4224 ii Column 0.62 Cum 18679.01 11580.9862 iii Lintel 1.18 Cum 14570.49 17193.1782 iv Roof beam 0.29 Cum 18679.01 5416.9129 |
| 174 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of Engineer-in Charge. |
| 175 | Fly Ash bricks (25x12x8)cm size having crushing strength 100kg/cm2 to 149kg/cm2 in cement mortar (1:6) in super structure after immersing the bricks for six hours in water before use including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the design & specification. |
| 176 | Fixing Granite tiles Above 0.40sqm. ( 20mm. Thick) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of Granite. |
| 177 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials, labours etc. complete as per the design & specification. Total 791250.45 GUARD ROOM 0.0 |
| 178 | Earthwork in excavation for Foundation trench in all kinds of soil including all cost of labour, T&P etc. complete as per the design & specification. |
| 179 | Sand Filling in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 180 | PCC(1:3:6) using 25mm down size metal including all cost of labour, T&P etc. complete as per the design & specification. |
| 181 | Fly ash Brick masonry in CM(1:6) in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 182 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 183 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. (A)Foundation 5.36 Cum 6856.7628540151 36752.2488975209 (B)Column 1.65 Cum 18679.0129742795 30820.3714075612 (C)Plinth Beam 2.31 Cum 7731.1735479281 17859.0108957139 (D)Roof beam 2.57 Cum 18679.0129742795 48005.0633438983 (E)Lintel 0.77 Cum 14570.4920309956 11219.2788638666 (F)Chajja 1.8 Sqm 1267.44 2281.392 |
| 184 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 185 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 186 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 187 | Fitting & fixing of Alluminium coated of TATA Brand 0.47mm thick GCI sheet in roofing etc complete asper the design & specification. |
| 188 | Iron Work in trosses & racks including fabrication works Hoisting,Cutting & weilding.etc completeas per the design & specification. |
| 189 | Providing Vitrified tile (600mmX600mm) size plain Ivory over 20mm thick cement mortar (1:4) including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specificartion. |
| 190 | Providing fixing UPVC sliding window of 2 track 2 pannel of 5mm thik clear glass of approved quality including all cost etc. comple as per diection of Engineer-In-Charge etc complete as per the design & specification. |
| 191 | Supplying, fitting & fixing Factory Made 30mm Flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick approved sunmica with seven years guarantee against termite & border etc with both sides complete with cost, conveyances, taxes of all materials & Aluminium fittings, labour, T&P etc. complete as per the design & specification. |
| 192 | Providing, fitting & fixing of Dressed seasoned Sal wood choukath (5\\"X2 1/2\\") including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete. Aas per the design & Specification. |
| 193 | Supplying Fitting & Fixing of Kadappa Tiles(10mm and above thick)etc complete. |
| 194 | Painting 2coats with Synthetic Enamel paint to new wood work over a coat of wood primer including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 195 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete asper the design & specification. |
| 196 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 197 | Wall painting 2coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. 827650.72 WOOD STORE |
| 198 | Earthwork in excavation for Foundation trench in all kinds of soil including all cost of labour, T&P etc. complete as per the design & specification. |
| 199 | Sand Filling in F&P including all cost of labour, T&P etc. complete as per the design & specification.. |
| 200 | PCC(1:3:6) using 25mm down size metal including all cost of labour, T&P etc. complete as per the design & specification. |
| 201 | Fly ash Brick masonry in CM(1:6) in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 202 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 203 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. (A)Foundation 1.24 Cum 18679.0129742795 23161.9760881066 (B)Column 2.97 Cum 7731.1735479281 22961.5854373465 (C)Plinth Beam 2.97 Cum 18679.0129742795 55476.6685336101 (D)Roof beam 1.28 Cum 14570.4920309956 18650.2297996744 (E)Lintel 3.6 Sqm 1267.44 4562.784 (F)Chajja 0.18 Cum 16101.7939141638 2898.32290454948 (G)Stair 0.0 |
| 204 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 205 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 206 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 207 | Fitting & fixing of Alluminium coated of 0.47mm thick GCI sheet in roofing etc complete asper the design & specification. |
| 208 | Iron Work in trosses & racks including fabrication works Hoisting,Cutting & weilding.etc completeas per the design & specification. |
| 209 | Providing Vitrified tile (600mmX600mm) size plain Ivory over 20mm thick cement mortar (1:4) including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specificartion. |
| 210 | Providing fixing UPVC sliding window of 2 track 2 pannel of 5mm thik clear glass of approved quality including all cost etc. comple as per diection of Engineer-In-Charge etc complete as per the design & specification. |
| 211 | Supplying, fitting & fixing Factory Made 30mm Flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick approved sunmica with seven years guarantee against termite & border etc with both sides complete with cost, conveyances, taxes of all materials & Aluminium fittings, labour, T&P etc. complete as per the design & specification. |
| 212 | Providing, fitting & fixing of Dressed seasoned Sal wood choukath (5\\"X2 1/2\\") including fixing the same in proper position with cost, conveyances, taxes of all materials, labour, T&P etc. complete. Aas per the design & Specification. |
| 213 | Painting 2coats with Synthetic Enamel paint to new wood work over a coat of wood primer including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 214 | Finishing wall surface with Cement based putty including cost, conveyances, taxes of all materials, labour, T&P etc. complete asper the design & specification. |
| 215 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 216 | Wall painting 2coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. Sub Total 947922.02 DISMANTLING |
| 217 | Dismentalling & Removing old Damage Tiled Flooring etc complete as per the design & specification. |
| 218 | Dismentalling & Removing Doors ,Windows & Ventilators Including Frames,Hinges etc as per the design & specification. |
| 219 | Dismentalling & Removing old Damage R.C.C Column, Beam, Slab, Staircase, Landing, Lintel as per the design & specification. |
| 220 | Dismentalling Brick or Stone Masonary Above 3.00mtr. Height as per the design & specification. |
| 221 | Dismantling Gypsum roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead as per the design & specification. Sub TOtal 456822.85 GATEWAY |
| 222 | Earthwork in excavation for Foundation trench in all kinds of soil including all cost of labour, T&P etc. complete as per the design & specification. |
| 223 | Sand Filling in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 224 | PCC(1:3:6) using 25mm down size metal including all cost of labour, T&P etc. complete as per the design & specification. |
| 225 | RCC of M-20 grade of concrete using 20mm & downgraded c.b.h.g. chips including mixing, laying upto required level & compacting, watering, curing including cost, conveyances, royalties, taxes of all materials, labour, T&P with centering & shuttering (excluding cost of reinforcement) etc. complete as per the design & specification. a Foundation 4.02 Cum 6856.76 27564.18 b Column 1.61 Cum 18679.01 30073.21 c Plinth Beam 3.73 Cum 7731.17 28837.26 d Roof Beam 4.15 Cum 18679.01 77517.89 e Roof Slab 5.43 Cum 14173.93 76964.44 f Lintel 1.48 Cum 14570.49 21564.33 |
| 226 | Cutting, straightening, bending & binding M.S./ T.S. rods & tying grill for R.C.C. work including placing the same in position with cost, conveyances, taxes, royalties of reinforcement & binding wire, cost of labour, T&P etc. complete as per the design & specification. |
| 227 | Fly ash Brick masonry in CM(1:6) in F&P including all cost of labour, T&P etc. complete as per the design & specification. |
| 228 | Fly Ash Brick masonry in cement mortar (1:6) in SUPERSTRUCTURE using brick of size 25cmx12cmx8cm having compressive strength not less than 75kg/mm2 including cost, conveyances, royalties, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 229 | 12mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 230 | 16mm thick cement plaster in cement mortar (1:6) over brick masonry including watering, curing with cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 231 | Wall Painting Two Coats With Plastic Imulsion Paint over a coat of Cement primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 232 | Wall painting 2coats with Weather seal coat over a coat of wall primer to inside surface including cost, conveyances, taxes of all materials, labour, T&P etc. complete as per the design & specification. |
| 233 | Supplying, fitting and fixing MCM of approved make confirming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive confirming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge. |
| 234 | Stainless Steel Letters size up to 0'-60\\" height. |
| 235 | Iron work wrought and put up in grated doors. Total For 1 No of Gateway 1499988.78 Total For 2 No of Gateway 2999977.56 GFRC BENCH 20.0 NOS 35000.0 700000.0 P.H WORKS |
| 236 | GPH Works: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. a 20 mm CPVC (sdr-13.5) pipes 150.0 Mtr 205.8 30870.0 b 25 mm CPVC(sdr-13.5) pipes 100.0 Mtr 274.1 27410.0 c 32 mm CPVC sdr-13.5 pipes. 100.0 Mtr 400.2 40020.0 |
| 237 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. |
| 238 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge. |
| 239 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 240 | Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge. (1000ltr capacity) |
| 241 | Fixing Wash down water closet, (European type W.C Pan) with integral S or P trap confirming to IS 2556: Part 8 -2004 to the floor with soil pipe in cement mortar (1:1) etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. |
| 242 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. a 15mm dia CP Health Faucet of 1.0mtr long ALD-BLK-583. 3.0 Nos 1897.8 5693.4 b Providing and fixing 20mm dia CP Regular Body Concealed Stop Cock. 6.0 Nos 2575.7 15454.2 c Providing and fixing 15mm dia CP two way bib cock . 10.0 Nos 2649.5 26495.0 |
| 243 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. a In Toilets i 110mm diameter U-PVC SWR pipes 200.0 Mtr 568.1 113620.0 ii 110mm U-PVC door Tee. 37.0 Each 137.2 5076.4 iii 110mm U-PVC offset. 37.0 Each 115.2 4262.4 iv 110mm U-PVC door bend. 37.0 Each 131.7 4872.9 v 110mm U-PVC plain shoe bend. 37.0 Each 186.5 6900.5 vi 110mm U-PVC vent cowl. 37.0 Each 38.4 1420.8 vii 110mm P-trap. 37.0 Each 225.0 8325.0 viii 110mm U-PVC plain bend. 37.0 Each 72.3 2675.1 ix 100mm S/S coupling with EPMD. 2.0 Each 365.3 730.6 b Supplying all materials, labour, T&P and fixing standard sized Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock 2.0 Each 1246.8 2493.6 |
| 244 | Providing and fixing to wall or ceiling and floor upvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. a 40 mm diameter 400.0 Mtr 559.3 223720.0 b 25mm diameter 990.0 Mtr 274.1 271359.0 |
| 245 | Supplying all materials, labour, T&P and fixing Flat back large pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Size-37.5x39x59 cm. |
| 246 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. 10 Liters capacity PVC cistern with 32mm dia flush bend. Size 47.6 X 15.5 X 32.5 cm. 8.0 Each 1605.5 12844.0 |
| 247 | Supply and fixing all materials, labour, T & P and providing urinal partition with italian collection (pastel)- size- 75x16.5x36.5 cm Cat no-61005 etc all complete as per direction of the Engineer-In-Charge. |
| 248 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. a 750mmx600mm size B.E.mirror 11.52 Sqm 775.6 8934.912 |
| 249 | supplying and fixing 50mmx800mm long PVC urinal waste pipe. |
| 250 | RCC Hume Pipe NP3 class With Collar Joint (600mm). |
| 251 | RCC Hume Pipe With Collar Joint (100mm). |
| 252 | Rubber Ring for RCC Hume Pipe With SPIGOT AND SOCKET JOINT PIPES. a 600 mm Hume Pipe. 150.0 Nos 247.7 37155.0 b 100 mm Hume Pipe. 199.0 Nos 36.1 7183.9 |
| 253 | Providing and fixing 15mm dia CP Bib Cock body. |
| 254 | Providing and fixing CP brass Soap case. |
| 255 | Providing and fixing CP brass soap Dispenser with glass bottle. COUNTERSUNK WASH BASIN |
| 256 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. a Supplying all materials, labour T&P and fixing counter sunk Wash Basin Size - 545mmx545x180mm, Cat.No. FLS-WHT-29601 with all fittings as per direction of the engineer-in -charge. 2.0 Each 6840.3 13680.6 b Fixing of 25mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve. 6.0 Each 683.7 4102.2 c Fixing of 32mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve. 6.0 Each 1023.2 6139.2 d Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve. 6.0 Each 1325.1 7950.6 e Fixing of 50mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve. 10.0 Each 2551.3 25513.0 i 15mm dia PVC connection pipe 450 mm long. 6.0 Each 100.0 600.0 ii 15mm dia CP Extention Nipple. 6.0 Each 40.4 242.4 f Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge. 20.0 Kg 335.0 6700.0 |
| 257 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge. a 15mm dia CP hand shower with reebit cleaning system(ABC chrome plated). 22.0 Nos 946.5 20823.0 |
| 258 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated & unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/300 psi) as required to suit the site condition as per the direction of Er-in-charge including use of own rigs with its accessories ,tools & plant & consumables etc for lowering of 200 mm dia PVC/GI pipes foe housing fitted with socket & with or without well screen as per the necessity for soft ,medium,hard & boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). a 40 Mtr of Bore Well 40.0 Mtr 1017.8 40712.0 b 40 mtr to 60 mtr 20.0 Mtr 2358.0 47160.0 |
| 259 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 260 | Lowering of 200mm dia P.V.C casing pipes. a 00 mtr to 40mtr 40.0 Mtr 140.2 5608.0 b 40 mtr to 60 mtr 20.0 Mtr 140.2 2804.0 |
| 261 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. a 200mm dia PVC (sch-80) pipe 45.0 Mtr 1916.48 86241.6 |
| 262 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department). |
| 263 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. a By DTH Rig 1.0 Each 6586.0 6586.0 |
| 264 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge . a 2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capacity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby). 1.0 Each 25255.24 25255.24 |
| 265 | DOL Control panel |
| 266 | 40mm dia steel short piece |
| 267 | Well cap |
| 268 | 50mm size CI bracket |
| 269 | 2.50sqmm flat cable |
| 270 | 20mm dia rigid UPVC pipes |
| 271 | Steel rope with cover |
| 272 | Labour charges for lowering including transportation. |
| 273 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. 32mm HDPE pipes 250.0 Mtr 99.8 24950.0 |
| 274 | Laying in trenches Unplasticized PVC pipes confirming to IS:4985-2000 & specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete. (Earth work in trenches to be measured & paid separately). 110 mm dia 400.0 Mtr 311.9 124760.0 |
| 275 | Providing and fixing square mouth S.W gully trap class SP-1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size (inside),the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per the standard design brick masonry chamber of size 180 X 150 mm size complete as per approved specification and direction of the Engineer in charge. ManHole Size- 760 x760x450 mm 20.0 Nos 8509.7 170194.0 |
| 276 | Soak Pit of 1.2 mtr dia and 2.0 mtr depth |
| 277 | Septic Tank (20 users) |
| 278 | Supplying fitting and fixing of factory made single leaf rigid FRP composite door shutter of 32mm thick laminated with to GRP skins with good grain finished fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsm E-glass chopped strand mat with cost conveyance, labour T&P etc complete required for the work . |
| 279 | Supplying fitting and fixing of factory made FRP door frame of size 75mmx100mm including drilling holes in masonary wall with cost of all materials rawl plug screws with cost conveyance, labour T&P etc complete required for the work. |
| 280 | Supplying, fitting and fixing of Chempier Head Fountain including spray nozzle, extension tubes, flow control valve, etc. Total 5174513.81 ELECTRICAL INTERNAL ELECTRIFICATION |
| 281 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked with 20 mm dia HMS FRLS PVC conduit ISI marked 6A modular type ( anti-bactorial and flame retradant type) switch ISI marked and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( anti-bactorial and anti-bactorial and flame retradant type) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. a Group A 50.0 Nos 621.0 31050.0 b Group B 22.0 Nos 924.0 20328.0 c Group C 14.0 Nos 1309.0 18326.0 FITTINGS & FIXTURES |
| 282 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. The luminaire should be Replacement Warranty will be 2 years. |
| 283 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 284 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(Fan Regulator Compatible) |
| 285 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge . |
| 286 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 287 | Supplying,fixing of 1x6A+1X16A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti bactorial and flame retradant type) with suitable size modular box & metallic cover plate (both side)( anti-bactorial and flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..(For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 288 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. The luminaire should be Replacement Warranty will be 2 years . |
| 289 | Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable ISI marked as approved, in surface/recessed PVC conduit medium ISI marked as approved as required. a 2 X 4 sqmm + 1 X 2.5 sqmm 50.0 Mtrs 158.0 7900.0 b 2 X 2.5 sqmm + 1 X 1.5 sqmm 30.0 Mtrs 114.0 3420.0 c 2 X 1.5 sqmm + 1 X 1.5 sqmm 20.0 Mtrs 89.0 1780.0 |
| 290 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar OF reputed make ISI marked as approved. a 8 way SPN , MCB DB double door 2.0 Nos 6875.0 13750.0 EXTERNAL ELECTRIFICATION 0.0 SEMI HIGH MAST LIGHT 0.0 |
| 291 | Supply installation, testing and commissioning of 12 Mtr Sports Lighting pole design as per IS 875 for wind speed(200km/h) the suitable for monting 2 nos 400W sports lighting flood light fixtures, The pole shall be hot dip galvanised steelmast structure,ncluding all necessary Mehanical and Electrical accsessories. THe cost includes the casting of Civil foundation as per the design . |
| 292 | Supply installation testing and commissioning of high-quality integrated LED Sports Flood Light with a minimum system lumen of 48K Lm and system wattage not exceeding 400W (+/-5%) with a nominal efficiency >150 lumen/watt for 60 deg beam angle . CCT :5700K (tolerances on CCT: +/- as per ANSI C78:377A) CRI: >90,TLCI >90, Suitable to achieve 500Lx Average horizontal Lux for the Volleyball Ground . LED Chip driving wattage : >2W<=5W , L-70 Life: minimum 50000 Burning Hours The housing should be of High Grade ADC 12 PDC Al alloy housing with Passive Cooling heat transfer technique , offering a totally silent, robust, heat transfer with seperate driver & optical compartmnet for thermal isolation , powder coated with corrosion resistance Powder using Nano Technology to withstand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. . The Luminaire driver should be made of Extruded Aluminium housing with IP67 protection for better thermal management and durability and should have an internal surge protection of 6kv with additional External SPD of 20kV/10KA duly fixed inside the luminaire, Drive should be with PF >0.95, THD<10% and output ripple current shoould be less than 2% at Io max. The luminaire should be of Class B Serviceability. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. |
| 293 | Supply, installation, testing and commissioning of necessary electrical system which included, DB for poles , Trailing cables from DB to Luminaire on Top of Pole . STREET LIGHT 0.0 |
| 294 | Supply of 4.2 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more, base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more as per direction of Engg. in Charge. |
| 295 | Supply ,Installation testing commissioning of Asthetically designed 40-45W(post top), High efficient LED comprises with spun aluminium top cover ,dicast aluminium heatsink,frosted polycarbonate diffuser with dicast mounting base arm.CRI>70, IP65, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT-4000/5700K,THD<10%,Powerfactor>0.95, Surge protection-4 kV internal and 10KV external, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 4600 lumens (115 lm/W). Having warrantied for a period of 5 years . The luminaire to be installed in 6 mtr long GI hot dip galvanized smart pole with anti corroson,,uv rays stabilized,metal post with covered by resin of reputed make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCB as per the pole drawing and direction of EIC against which inspection mat take place. It should be installed after making proper size RCC foundation by considering RCC foundation by using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge. |
| 296 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 297 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (5 Years Warranty). |
| 298 | Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more as per direction of Engg. in Charge. |
| 299 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge. SPIKE LIGHT 0.0 |
| 300 | Supply, Installation, Testing and Commissioning of outdoor type 12W LED Spike Light made up of Die-Cast Aluminium with Extruded Aluminium body and clear toughened Glass diffuser of size 113 x 100 x 451mm with IP-65 & IK-04 protection similar to K -lite KL-4267 or equivalent as approved and directed by engineer in charge. BOLLARD LIGHT 0.0 |
| 301 | Supplying ,installation & fixing of 10-11W(BOLLARD), High efficient LED with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire efficacy ≥ (90 lm/W). Make-Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. INGOURND BURIAL 0.0 |
| 302 | Supply, Installation, Testing and Commissioning of outdoor type 12W-15W LED Inground Burial made up of pressure die cast aluminium body with IP-67 & IK-09 protection similar to K Lite KL4472 including Two Way - 3 Pin connector with IP68 protection similar to KLite KL-8160 or equivalent as approved and directed by engineer in charge. PANEL 0.0 |
| 303 | STREET LIGHT PANEL :S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Provision of 40kA 3P+N type 2 SPD alongwith 63A, 4P, MCB, C series, 10kA is to be given in the incomer.,04 nos 10A 4P MCB,C,10KA as outgoing Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 year of acceptance of materials. CABLING AND END TERMINATION 0.0 |
| 304 | Supplying, storing, laying, testing and commissioning of 3C X 4 Sq. mm Copper Cable 1100 Volts etc. as required. as per the direction of Engineer-in-Charge. |
| 305 | Supplying, storing, laying, testing and commissioning of 3C X 1.5 Sq. mm Copper Cable 1100 Volts etc. as required. as per the direction of Engineer-in-Charge. |
| 306 | Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable 1100 Volts in existing pipe etc. as required. as per the direction of Engineer-in-Charge. |
| 307 | Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm A2XFY Al armoured Cable 1100 Volts in existing pipe etc. as required. as per the direction of Engineer-in-Charge. |
| 308 | Supply and laying of 40mm dia DWC pipe for laying of cable etc. as required including excavation and refilling the trench as per the direction of Engineer-in-Charge. |
| 309 | Supply and laying of 63mm dia DWC pipe for laying of cable etc. as required including excavation and refilling the trench as per the direction of Engineer-in-Charge. EARTHING SYSTEM 0.0 |
| 310 | Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc without charcoal and salt as required. |
| 311 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 312 | Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required. |
| 313 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required. SOLAR 0.0 |
| 314 | Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono PERC HALF CUT bifacial Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on hot dip GI structure( solar panel bottom height from roof level shall not be less than 300mm, accordingly GI structure to be designed) of suitable strength with following components a complete as arequired: a) Solar Photovoltaic Module of capacity 545Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 22%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Tata/waree/luminous/adani/panasonic. The entire SOLAR system should be Replacement Warranty will be 5 years. TRANSFORMER 0.0 |
| 315 | For Transformer Connection Total 7749564.145456 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender