Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58628790

Tender For Repairs To Internal Water Supply, Sanitary Fittings, Ci/Pvc Pipes, Flooring-Dado, Kota Stone, Granite And Certain Internal Repairs Crumple Joints Etc For Other Than Hospital And Herritage Buildings At Inhs Asvini Under Age (I) Asvini, Cola

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
40 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Internal Water Supply, Sanitary Fittings, Ci/Pvc Pipes, Flooring-Dado, Kota Stone, Granite And Certain Internal Repairs Crumple Joints Etc For Other Than Hospital And Herritage Buildings At Inhs Asvini Under Age (I) Asvini, Colaba, Mumbai

BOQ

Name of Work:- REPAIRS TO INTERNAL WATER SUPPLY, SANITARY FITTINGS, CI/PVC PIPES, FLOORING-DADO, KOTA STONE, GRANITE AND CERTAIN INTERNAL REPAIRS CRUMPLE JOINTS ETC FOR OTHER THAN HOSPITAL AND HERRITAGE BUILDINGS AT INHS ASVINI UNDER AGE (I) ASVINI, COLABA, MUMBAI
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primesed completed all as specifed and directed
2Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm laid in floor over and including 15mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.
3Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7-8mm thick but laid on vertical surfaces such as skirting(100mm hight) /dado etc., laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.
4M&L double charge premium quality vitrified ceramic tiles 9-10mm thick (600 x 600 mm) polished area of each tiles not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge..
5S&F 9-10mm thick full-body vitrified tiles with factory-made bullnose edge finish and self-embossed anti-skid grooves, of size 300 x 1200mm for stair treads, in approved colors/shades,fixed with adhesive complete all as specified and directed by the Engineer-in-charge
6S&F 9-10mm thick heavy-duty full-body vitrified tiles of size 200 x 1200mm for stair risers, in approved colors/shades,fixed with adhesive complete in all as specified and directed by the Engineer-in-charge
7S&F 9-10mm thick full-body vitrified tiles with factory-made bullnose edge finish and self-embossed anti-skid grooves, of size 600 x 1200mm for stair treads, in approved colors/shades, fixed with adhesive complete all as specified and directed by the Engineer-in-charge
8S&F Dholpur stone in vertical surface finish with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), area not exceeding 0.09 sqm laid over with 15mm thick backing coat with cement mortar (1:3) laid and jointed in neat cement slurry mixed with pigment to match the shade of tiles complete all as specified and directed by Engr-in-charge.
9Dismantling stone slabs and tiles of any description or thickness in floors, laid, bedded and pointed in any mortar including removal of rubbish out side MD land.
10M&L for machine cut, mirror polished granite slab 20 mm thick as in steps, jambs, pillars, window cills, cooking platform in one piece of any size of approved colour laid over and including screed bed 15 mm thick in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including necessary grinding and rounding moulding to corner of slab complete all as specified and directed by Engineer-in-Charge.
11Material & Labour for 22-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified and directed.
12M &L for machine cut kota stone slab 22 to 25 mm thick as in vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including rubbing, cutting and polishing as specified in SSR Part I complete all as specified and directed.
13M&L for mirror polishing on marble/granite/kota stone/ stone work where required to give high gloss finish complete all as specified and directed by Engr-in-chage.
14S&F in repairs 40mm dia PVC waste pipe 90cm long with waste coupling for WHB and urinals ,complete all as specified and directed.
15Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified and directed.
16M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
17Supply & Fixing in repairs rotational moulded polythylene water storage loft tank of 250 ltr capacity including all connections for inlet, outlet, over flow and wash out etc including 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) hoisted and fixed in position all as specified in SSR Part-I
18Supply & Fixing in repairs rotational moulded polythylene water storage loft tank of 500 ltr capacity including all connections for inlet, outlet, over flow and wash out etc including 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) hoisted and fixed in position all as specified in SSR Part-I
19S & F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, minimum weight 42gms each complete all as specified and directed.
20Material & Labour for mild steel plates 6mm thick ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A for keeping loft tank including dismantling existing plate complete all as specified and directed.
21S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for support to iron plates of loft tanks conforming to Fe 410-W (Gde E-250 quality A) including dismantling existing plate complete all as specified and directed.Note :- The rates include for dismantling rolled sections and fixed propery in wall with cutting to brickwork and fixed with cement mortar (1:3) complete all as specfied.
22Supply and application of Sealant Ottoseal S 70 Premium silicone at the junction of the windows, sky lit roof, wall-floor tile joint, expansion joint, crumple joint etc.complete all as per manufacturers instructions.
23Supply and fixing in repairs unplasticized PVC spout in sunken portion to drain out the retained water or in balconies to drain out the retained water of 40 mm bore of pressure rating 10Kgf/Sqm and mininimum length from outside the wall will be 300mm including all neccessary fixing/fittings solution including bends, tee, reducers etc complete all as specified and directed
24S&F in repairs unplasticized PVC pipes of pressure rating 10 kgf/sq.cm of 32mm bore complete all as specified and directed by Engr-in-charge.
25M&L for 70mm thick cement concrete type B-1, 1:2:4 (Using 20mm graded stone aggregate), in sunken portion complete all as specified and directed by Engr-in-charge.
26M&L for cement concrete 1:5:10 (Using 40mm graded stone aggregate) filling in sunken portion complete all as specified and directed by Engr-in-charge.
27M&L for Water proofing treatment to RCC sunken slab (not exc. 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge:- (a) Surface Preparation: M & L for the preparation of the surfaces which are to receive the coating or treatment, must be free from oil, laitance, grease, wax, dirt or any other form of foreign material adhering on it before the waterproofing job started. Dust free the surface, including removing of existing treatment/ old felt / loose plaster / concrete etc. and repair with polymer mortar by adding bonding agent (SBR). Repairing of slab, parapet wall junction, cracks and other large blowholes by open in “V” shapes & filling by polymer mortar(1:2:4) or putty followed by fiber mesh tape with SBR in conjunction with cement.(b) Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system. It is applied at a minimum wet film thickness of 1.5 to 2mm in two coats by roller. The first coat of should be allowed to reach tack free condition before applying the second coat. Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified)2mm. After 72 hours of curing, flood/ponding test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. “All above operations to be done in presence of auth applicator in order all as specified and directed.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.Note: (i) PCC filling in sunken portion will be measured seperately. (ii) Rates for Demolition of cement concrete (unreinforeced) of any description and in any position for sunken portion (below or above ground level) are included. (iii) Sunken treatment shall be applied by the Company's authorised applicator firm only. (iv) Contrator has to get prior approval of applicator or authorised agency by submitting its authorisation letter to this office for approal prior to commencement of work. Department will conduct an officical verification from the manufacturer of its authorised agency.(iii) Submission of 5 years warranty certificate for Sunken Treatment is mandatory after completion of work. (iv) The cost of scaffolding, temporay supports work, if required at certain places is included in the respective items catered for repair itself. No extra cost shall be paid for the same.
28“M&L for surface preparation and carrying out polyurethane (PU) injection waterproofing treatment at identified leakage points in toilet floors, wall-floor junctions, cracks, floor traps, pipe sleeves, CI/PVC pipe junctions and similar leakage locations by drilling holes of suitable diameter, fixing injection nipples/packers and pressure injecting polyurethane injection resin having average consumption of not less than 0.25 kg per injection point, including sealing of holes/joints with PU sealant/polymer modified mortar, surface preparation, cleaning, testing, labour, materials, machinery, T&P and disposal complete as directed by Engineer-in-Charge.The PU injection resin used shall be single or dual component polyurethane grout, hydrophilic or hydrophobic type, low viscosity, moisture reactive, suitable for active seepage conditions and capable of expansion in presence of water for effective sealing of leakage paths.”Note:- (i) Rate shall include: - Packers/nipples, Drilling holes, PU resin, Injection equipment, PU sealantPolymer mortar, Labour & testing.No separate payment shall be made for:- (i) Consumables Wastage Multiple injections at same location, Surface finishing.(ii) Injection points shall be measured based on actual completed injections accepted by Engineer-in-Charge.(iii) The cost of Scaffolding work required at certain places is including. No extra shall be paid for the same.
29S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified and directed.
30Ditto- as per item No 29.00 above but 20mm bore.
31Ditto- as per item No 29.00 above but 25mm bore.
32Supplying and fixing 20mm bore CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings as required laid in floors or fixed to walls and ceilings with suitable size GI clamps including taking down old CPVC pipe and fittings complete all as specified and directed.
33Supplying and fixing 25mm bore CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings as required laid in floors or fixed to walls and ceilings with suitable size GI clamps including taking down old CPVC pipe and fittings complete all as specified and directed.
34Supplying and fixing 32mm bore CPVC pipes SDR 11 including Plain CPVC SDR 11 fittings as required laid in floors or fixed to walls and ceilings with suitable size GI clamps including taking down old CPVC pipe and fittings complete all as specified and directed.
35Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).
36S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including fixing clips, bends, elbows, shoes etc complete all as specified and directed.
37S&F 110 mm bore PVC(SWR) bend any radius, with rubber ring joints complete all as specified and as directed.
38S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.
39Taking down CI pipes including fittings from walls (measured overall as fixed along the centre line over fittings and accessories).
40S&F 75mm bore CI soil, waste and vent pipes centrifugally cast spun pipes without ears with cement joints and fixed in floors with suitable size GI clamps including jointed in cement mortar in any situation and in any position including all fittings complete all as specified and directed .
41S&F 75mm bore CI soil, waste and vent pipes centrifugally cast spun pipes with or without ears with cement joints and fixed to walls with suitable size GI clamps including jointed in cement mortar in any situation and in any position including all fittings complete all as specified and directed .
42S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and directed .
43S&F 75 mm bore dia CI bends (any radius) with duck's foot or heel rest complete all as specified and directed.
44S&F 100mm bore CI soil, waste and vent pipes centrifugally cast spun pipes without ears with cement joints and fixed in floors with suitable size GI clamps including jointed in cement mortar in any situation and in any position including all fittings complete all as specified and directed.
45S&F 100mm bore CI soil, waste and vent pipes centrifugally cast spun pipes with or without ears with cement joints and fixed to walls with suitable size GI clamps including jointed in cement mortar in any situation and in any position including all fittings complete all as specified and directed .
46S&F 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and directed .
47S&F 100 mm bore dia CI bends (any radius) with duck's foot or heel rest complete all as specified and directed .
48S&F 100 mm Traps 'P' and 'S' complete all as specified complete all as specified and directed .
49S&F 75 mm Traps 'P' and 'S' complete all as specified complete all as specified and directed .
50Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 100mm bore complete all as specified and directed by Engr-in-Charge .
51S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap and matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device and making all connections complete all as specified and directed .
52S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 110mm PVC 'S' trap and provision of lime concrete bedding and making all connections complete all as specified and directed .
53S&F in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.
54S&F in repairs wash hand basin vitreous china flat black type of size 630 mm x 450 mm white, including CI brackets and 32 mm dia PVC waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified and directed .
55S&F in repairs vitreous china urinal half stall type white including connection to flushing pipe and out going pipe complete all as specified and directed.
56S&F in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butterfly handle,ISI Marked, screwed down, screwed for iron pipe or for brass ferrrule or fixed complete all as directed.
57S&F 15 mm bore pillar taps cast copper alloy,chromium plated fancy type ,ISI Marked, with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule complete all as specified and directed .
58S&F in repairs 15mm bore Brass CP mixer for mixing Hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed.
59S&F 15 mm bore stop valve cast copper alloy, chromium plated, fancy type with long shank screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or union complete all as specified.
60S&F 15 mm bore stop valve cast copper alloy, chromium plated, fancy type with long shank screwed down high pressure concealed type with crutch or butterfly handle screwed both ends for iron pipes or union complete all as specified.
61S&F in repairs Brass chromium plated Tubular towel rail ,ISI Marked,20mm dia, D type, 60cm long between flanges complete all as specified and directed .
62S&F in repairs brass chromium plated shower rose 125 mm dia size without swivel joint including fixing to steel pipe of 15mm bore or union with CP 450-600mm long arm complete all as specified and directed by Engineer-in-Charge.
63S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe including 1.2mtr hose pipe with complete connection, ISI marked complete all as specified and directed
64S&F in repairs 20 mm bore gun metal globe or gate valve, with iron wheel, head, screwed both ends for GI pipe complete all as specified and directed .
65All as per item Ser No- 64 , but 25mm bore complete all as specified and directed .
66S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed .
67S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed ..
68S&F in repairs wall mounted looking mirror of size 2.00 x 0.60 mtr with necessary frame work complete all as specified by Engr-in-charge.
69S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge.
70S&F in repairs soap dish any type fixed to plugs with CP brass screws complete all as directed.
71S&Fin repairs grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as directed
72S & F in repairs PVC Mirror cabinet of size not less than 600 X 450mm of approved make and fixed to wall with CP brass screws complete all as specified
73Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land.
74M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even & smooth without using extra cement completed all as specified. .
75M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified.
76M&L for rendering 15 mm thick on fair faces of brickwork or concrete surfaces of wall in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement and finished even & smooth without using extra cement including necessary scaffolding and safety arrengement complete all as specified.( Water proofing compound will be measured and paid for separately).Note:- (i) The plaster should be carried out in two layer first layer should be 15mm finished with brush mark and the second layer of 5mm thick plaster.(ii) After finishing the first layer it should be curing for next 14 days before applying the second layer of plaster and applying second layer of plaster same curing process will be follow as intial one.
77Supply only integral water proofing compound complete all as specified .
78M&L for 1.50mm thick wall care putty on walls and finish even and smooth complete all as specified and directed by Engr-in-charge.
79-Ditto- all as per item No.78.00 above but in ceiling.
80Material and Labour for preparation of newly plastered surfaces of walls/ceiling, and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, over one coat of alkali resistant primer, complete all as per manufacturer's specification and as specified and directed.
81M&L for prepration of newly plastered external plastered wall surface and and applying Two or more coats of 100% Premium weather coat/Rain coat paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of alkali resistant priming paint complete all as specified and directed by Engr-in-charge.
82Prepration of old existing internal plastered wall/Ceiling surface and applying two coats distempering on plastered surfaces with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacture, of required shade and colour in wall/ceiling over a coat of alkali resistant priming paint complete as per manufacturers specification complete all as specified and directed by Engr-in-charge.
83Prepration of old existing external plastered wall surface and and applying Two or more coats of 100% Premium weather coat/Rain coat paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of alkali resistant priming paint complete and preparation complete all as specified and directed by Engr-in-charge.
84Dismantling wall and ceiling boards (POP,fiber, gypsum, pulp, insulation, aluminium etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets/ snap grid etc complete all as specified.
85Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with (Semi perforated 12mm thick micro tegular micro tegular false ceiling tiles of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications , drawing and as per directions of the Engineer-in-Charge
86M&L for Hollow PVC Wall Lining/louvers Single side prelam PVC sheet used instead of plain colour sheet consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr in Charge. Note: Rates of 5 mm thick PVC sheet fillet of width 35 mm for wall paneling are included.
87Dismantling of Mangalore pattern roof tiles including ridge tiles in roofing all as directed
88M& L roof tiles, manglore pattern, interlocking at side joints laid dry all as specified and directed.
89M&L for Ridge or hip tiles to suit manglore pattern of roofing tiles, bedded and jointed in CM 1:6 all as specified.
90Dismantling plain or corrugated steel/polycarbonate sheeting, any gauge, thickness, including nanital or similar pattern in roof coverings complete all as specified and directed.
91S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.
92S&F pre-painted hot- dip aluminium-zinc alloy metallic coated plain steel sheet, corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed
93S&F plain Aluminium sheeting 0.71mm thick Alloy 31000 H4 in as in crumple joints all including necessary fixing arrangements such as screws, clamps etc and also including scaffolding and all safety arrangements at a height upto 30 mtrs including taking down the old one complete all as specified and directed.
94Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sq.m each complete all as specified and directed by Engr-in-charge.
95Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq.m but not exc 4 sq.meach complete all as specified and directed by Engr-in-charge.
96S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately
97S& F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall not be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately
98S & F in repair for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge .
99S&F Aluminium alloy wire cloth, not less than 0.45mm nominal dia of wire and average width of aperature not more than 1.40mm and fixed to any type of framing with staple complete all as specified and directed by Engr-in-charge.
100S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge
101S&F in repairs for aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engineer-in-Charge.
102Supply & Fixing double action floor spring, hydraulically regulated, with minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, brass governing pivot and heavy duty mild steel parts, fixed complete, all as specified and directed.
103S&F in repair S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m for cupboards/kitchen cupboards/cabinets and alike complete all as specified and directed. Note : (i) Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates. (ii) Rates of following items are included :(i) Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree.(ii) Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs.(iii) Tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished. (iv) D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished.(v) Butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal.(vi) Piano/continuous hinge of size 19 mm stainless steel complete all as specified.(vii) Taking down old unsv boarding/plywood/prelaminated board including all mongeries of any thickness
104Supply and fixing solar control film 25 micron reflective type sticked to glass panes as per insturctions of manufacturers complete all as specified and directed.
105S&F in repair for 9mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.
106S&F in repair for 12 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.
107S&F in repair for 15mm thick and 150mm wide and 1500mm in length interlocking laminated wooden flooring (Design and colour as approved by Engr-in-charge) laid on 5mm thick PVC foam paste to floor with adhesive as per manufacturer instruction including proper levelling of floor be done before laying including filling holes/cracks/patches with cement plaster (1:4) to made level true complete all as specified and directed by Engr-in-charge.
108S&F in repairs sinks stainless steel 304 grade 1 mm thick kitchen or laboratory with plugs washers and wastes: incluidng bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union ot pipe upto 0.50 sqm each overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as directed
109Supplying and fixing 150 mm long floor door stopper,ISI marked , of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
110S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engr in Charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628790
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40 Lakhs
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Internal Water Supply, Sanitary Fittings, Ci/Pvc Pipes, Flooring-Dado, Kota Stone, Granite And Certain Internal Repairs Crumple Joints Etc For Other Than Hospital And Herritage Buildings At Inhs Asvini Under Age (I) Asvini, Colaba, Mumbai
Basic Detail
Tender No 8039/CWE(NW)MUMBAI/E8
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 20 Nov 2026
Submission Date 09 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 40 Lakhs
Tender Fee 500
EMD 80000
Exemption Available
Document List
22cba556-8466-481c-9338-362fa919db36.html
8039.rar
BOQ_896775.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

22cba556-8466-481c-9338-362fa919db36.html

rar

8039.rar

xls

BOQ_896775.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender