Tender For Supply And Construction Of 01 X Underground Ammunition Bunker
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
49580
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of 01 X Underground Ammunition Bunker
BOQ
| Sl. No. | Item Description |
| 1 | 01 X UNDERGROUND AMMUNITION BUNKER |
| 2 | Supply & constrction of Pre fababricated M-50 grade RCC culverts of size 2.5m x 2.5m x 1.5m |
| 3 | Exavation of size 3.0M x 3.0M x 8M for placing of culvert |
| 4 | Returning,filling in including spreading , levelling,watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 5 | Cement Bags OPC-53 grade conforming to IS -8112-1989 packed in HDPE Bag of 50 Kg each confirming to IS-11652/2000 (Make : Ambuja I Birla I Ultratech I ACC). |
| 6 | Sand conforming to IS-383-1970. The sand shall be hard, dense, strong, durable, clear and free from veins, adherent coatings, disintegrated pieces, alkali, vegetable matters and other deleterious substances. |
| 7 | Graded Stone Aggregate of size n exc 63mm conforming to IS383-1970 (Hard core) |
| 8 | Graded Stone Aggregate of size 20mm conforming to IS-3831970 |
| 9 | Closing of back side of culvert with precast RCC slab of size 2.9m x 2.94m x 0.20 m with reinforcement of TMT Grade 550 D. Reinforcement provided in the slab is must be atleast 88.9 Kgs/m3. The back wall be designed to have plug side and socket to fixing as per requirement. |
| 10 | Fabrication for closing of front side of culvert with steel frame and MS plate as per specified as below: -(a) Min Size- 2.90 mtr x 2.94 mtr(b) All around frame - Equal angle 50 x 50 x 5 mm.(i) For vertical angle -- 02 Nos with the length of 2.50 mtr of size equal angle 50 x 50 x 5 mm. (ii) For horizontal angle - 02 Nos with the length of 2.50 mtr 02 Nos with the length of 0.85 mtr of size Equal angle 50 x 50 x 5 mm.(c) MS Plate — 3 mm thick MS plate of size 2.5 mtr x 2.5 mtr.(d) Fixing - Fixed with self drilled fastener of 8 mm dia and 50mm length (Nos-08)(e) All iron should be pre painted Door. Supply of pre painted Steel doors of size 0.85 x 2.00 m with angle iron frame (50x50x5mm) with two cleats welded to the Frame as door stopper. Leaf will be consisting of not less than three panels (frame made of angle iron 25 x 25 x 5mm withl .25mm thick MS sheet covering Including 1 Nos MS sliding door bolt 300mm, two Nos -Tower bolt 200mm , three Nos - MS hinge 125mm size , two Nos -125mm Handle fabricated out of 25 x 6mm thick flat iron,four Nos - 40mm x 6mm of 300 mm long hold fast of Fl made to shape, complete with two coats of synthetic enamel plaint over a coat of red oxide. The cost to incl all type of fabrication and erection. Make of sturctural members are SAIL/TATA/RINL/JINDAL |
| 11 | PVC casing capping 20 mm size Make: Polyplast/ BeraIia /Power/Shakti |
| 12 | 20mm dia PVC conduit pipe med grade Make: Polyplast Beralia/Power IShakti |
| 13 | PVC Tee 20mm casing capping Make Polyplast/BeraIia/Power/Shakti |
| 14 | PVC Tee 20mm conduit Make Polyplast/ Beralia/Power/ Shakti |
| 15 | PVC Bend 20mm Casing Capping Make: Polyplast/BeraIia/Power/ShaktI |
| 16 | PVC Bend 20mm conduit Make: Polyplast/Beralia/Power/Shakti |
| 17 | Supply of PVC heavy duty Exhaust fan 300 mm with louvers & 100mm dia PVC and fixed with 300 mm x 300 mm x 4mm PVC sheet. |
| 18 | LED tube rod 4' x 20 W conforming to IS 2418-1997 Make Philips/Crompton Greaves/GEC/Wipro/Bajaj/ Havells/Asian |
| 19 | 5 Pin 15 Amps switch socket combination with PVC mounting box Make : Havells/ GM Modular/Legrand/Polycab |
| 20 | 5 Pin 5 Amps switch socket combination with PVC mounting box Make- Havells/ GM Modular/Legrand/Polycab |
| 21 | Switch piano type 5 Amps Make- Havells/ GM Modular/Legrand /Polycab |
| 22 | MCB DP 32Amps conforming to IS 8828-1996 Make Havells/ L&T/Anchor |
| 23 | PVC junction box 3 way 25mm cassing capping Make Havells/ L&T/Anchor |
| 24 | Wire PVC insulated cable 1.5 sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90m long of Make: Havells/ Finolex/ Plaza /Nicco/ Polycab /Anchor /GIoster. |
| 25 | Wire PVC insulated cable 2.5sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90m long of Make: Havells/ Finolex/Plaza/ Nicco/ Polycab /Anchor /Gloster. |
| 26 | Sand Bag (PP as HDPE fabric 100 to 120 GSM) min length 660 mm and min width 350 mm. |
| 27 | MS/GI Bench: - Fabrication and supply of MS/GI bench as per specified as below:-(a) Size - 1.8 mtr x 0.50 mtr x 0.90 mtr(b) Frame - equal angle 40 x 40 x 4 mm and Fl 40 x 4 mm for frame and support and 12 mm ply fixed on the top of base frame and horizontal support with cushion and cushion cloth.(c) Fixing - (a) Fixing - Fixed with self drilled fastener of 8 mm dia Nos (04)(d) Steel bench should have folded and unfolded arrangement with the wall.(e) All steel should be pre painted. (Make of plywood Century/ Kitply/Archid ply/National Plywood/ Anchor/ and Make of steel : SAIL/TATA/JINDAL |
| 28 | SIGI Rack: Fabrication and supply of MS/GI rack as per specified as below: -(a) Size - 1.8 mtr x 0.50 mtr(b) Frame - equal angle 40 x 40 x 4 mm and Fl 40 x 4 mm for frame and support and 12 mm ply fixed on the top of base frame. (d) Support — 0.45mtr length of equal angle 40 x 40 x 4 mm with pre punched. (Nos-04)(c) Fixing - Fixed with self drilled fastener of 8 mm dia (Nos-04) (d) All steel should be pre painted.(Make of plywood Century/ Kitply/Archid ply/National Plywood/ Anchor and Make of steel : SAIL/TATA/JINDAL |
| 29 | EPDM :- 1.5 mm thick EPDM (Ethylene Proplene Diene Monomer) is a high performance synthetic rubber membrane over apreared concrete surface to provide a durable, flexible and waterproof lining. |
| 30 | MS Hollow Square Pipes(50x50x2mm) |
| 31 | PPGI Sheet (3000mm x 1050mm x 0.5mm) |
| 32 | 'L' shaped Iron angle (1\\"x1\\"x3mm) |
| 33 | flat Iron frame (1\\"x3mm) |
| 34 | Rectangular iron square pipe (1\\"x3\\"x3mm) |
| 35 | MS Door of size 2.1M x 1.2M with single leaf 2mm thick MS sheet covering Including 1 Nos MS sliding door bolt 300mm, two Nos -Tower bolt 200mm , three Nos - MS hinge 125mm size , two Nos -125mm Handle fabricated out of 25 x 6mm thick flat iron,four Nos - 40mm x 6mm of 300 mm long hold fast of Fl made to shape, complete with two coats of synthetic enamel plaint over a coat of red oxide. The cost to incl all type of fabrication and erection. Make of sturctural members are SAIL/TATA/RINL/JINDAL |
| 36 | M & L for hardcore broken stone or boulders of gauge n exec 63mm, deposited spread and levellled in layers n exc 15 cm thick, watered and rammed to true surface completed as as specified |
| 37 | M&L for cement concrete 300mm & 200mm thick in foundation normal mix type B1, 1:2:4 using 20mm grade aggregate complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender