Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58628766

Tender For Special Repair Of Bldg No T-117 (A Mess) At Me Line Of 223 Abod At Surnussi Under Age (I) Surnussi

Issued by Statutory Bodies & Commissions/Committees · Jalandhar, Punjab
Tender Value
24.51 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
49100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Of Bldg No T-117 (A Mess) At Me Line Of 223 Abod At Surnussi Under Age (I) Surnussi

BOQ

Name of Work:- Special repair of Bldg No T-117 (A Mess) at ME Line of 223 ABOD at Surnussi Under AGE (I) Surnussi
Sl. No. Item Description
1Demolition of brick work built in cement mortar , including all quoins arces etc
2Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick above or below ground level, complete all as directed.
3Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified & directed.
4Taking down chowkats or frames with Shutters (without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site,complete all as specified & directed.
5Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm each and removing from site, complete all as specified & directed.
6Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm, complete all as specified & directed.
7M&L for brick work , with sub class 'B' bricks built in cement mortar 1:6, straight or curved on plan exc 6 m mean radius with old size bricks complete all as specified & directed.
8All as per description of serial item no. 7 above but except brick work.
9M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified & directed.
10M&L for plaster for work 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified & directed.
11M&l for 5 mm thick rendering in cement mortar in 1:3 on ceiling surfaces, complete, all as specified and directed
12Demolition of stone slabs, floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to store and rubbis off the premises, complete, all as specified and directed.
13M&L for Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm th screed or bedding layer in CM 1:6, complete, all as specified and directed.
14M&L for glazed ceramic tiles coloured of size 450 mm x 350 mm x 7mm thick on vertical surfaces such as in skirting, dado etc over and including 10 mm thick backing coat in CM 1:4, complete all as specified & directed.
15M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors including 20 mm thick screed or bedding layer in CM 1:6, complete, all as specified and directed.
16M&L for 18-20 mm thick machine cut kota stone slab flooring over staircase with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over and including 20 mm thick screed or bedding layer in CM 1:6, complete, all as specified and directed.
17M&L for 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes, complete all as specified & directed.
18M&L for 75 mm th PCC 1:3:6 type C2 as in plinth protection with using 40mm graded stone aggregate etc all as specified. Note: Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in altranative bays not exceeding 3m in length. Joints of 6 mm wide 10 mm deep shall be provided along the wall and bays and same shall be filled with between mastic (1:3)
19M&L for plain Cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in filling and mass concrete, complete all as specified and directed.
20M&L for PCC 25mm thick 1:2:4, type B1 using 20 mm graded crushed stone aggregates as in levelling course, complete all as specified and directed.
21Form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete, complete, all as specified and directed.
22M&L for reinforced cement concrete (nominal mix) type B0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in columns,piers,pillars , posts the like, complete, all as specified and directed.
23Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete, all as directed.
24S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165), complete, all as specified and directed.
25S & F Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar,hook and eye closure Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete, all as specified and directed.
26S & F Anodised aluminium window and ventilator shutters, powder Coating (minimum thickness of powder coating 50 micron) sliding with three channel section, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete, all as specified and directed.
27S&F anodised aluminium frame powder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately, complete, all as specified and directed.
28S&F anodised aluminium door shutters, powder coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 2 Nos tower bolt of size 200 mm, hinges, anodised aluminum snap beading screws etc with Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section, complete, all as specified and directed.
29S & F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square not exc 0 .5sqm in each pane, complete, all as specified and directed.
30S & F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square exc 0 .5sqm in each pane, complete, all as specified and directed.
31S&F 6mm thick coloured bakelite sheet fixed to aluminium frame/shutter as in doors or partitions complete all as specified and directed
32S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm, complete, all as specified and directed.
33M&L for 6 mm thick 600x450mm bevelled edged mirror of selected quality glass mounted on AC board fixed to wooden plug with chromium plated screwson screed bed in cm (1:6), complete, all as specified and directed.
34S&F in repairs 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete, all as specified and directed.
35Taking up/ down GI tubing and connections with all fittings 15 mm bore.
36All as per item No 35 above but 20mm bore pipe.
37S&F 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc, complete, all as specified and directed.
38S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete, all as specified and directed.
39S&F in repair 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.
40S&F in repair 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.
41Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity
42S&F Rotational moulded polythene water storage tanks triple layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size, complete all as specified and directed
43S&F in repair vitreous china squatting pan ‘Orissa patten’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe) with \\"P' or \\"S\\" trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified and directed .
44S&F in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.
45M&L for preparing new surfaces of wood and applying two coats of Synthetic enamel paint over a coat of pink primer, complete, all as specified and directed.
46M&L for three coats of white wash on newly plastered surface including preparation of surface, complete, all as specified and directed.
47M&L for preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer, complete, all as specified and directed.
48M&L for preparing surfaces of old walls and applying one coats oil bound distemper,complete, all as specified and directed..
49M&L for Complete removal of existing treatment of walls to prepare the surface even and smooth complete all as specified and directed.
50M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with colour scheme change, complete all as specified and directed
51Dismantling Ceiling boarding, any description, fixed in any position with nails complete all as specified and directed.
52M&L for 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm thick and Tee 25X35mmX1.5mm thick and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed.
53M&L for 12mm thick perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed.
54Dismantling of steel sheeting (corrugated, semicorrugated, etc.) sheets in roofcoverings, complete, all as specified and directed.
55Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roofcoverings, complete, all as specified and directed.
56S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedfixed with J type hooks.complete, all as specified and directed.
57S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.
58S&F 30mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces, complete, all as specified and directed.
59M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical door spring, complete, all as specified and directed.
60M& L for Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick thick,complete, all as specified and directed.
61M & L for PCC 1:3:6, type C-1 with 20 mm aggregate as in door frames for fixing holdfasts and making good to the entire satisfaction of the Engineer in charge.
62S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified & directed.
63S&F 150 mm size extruded aluminium alloy handle, fabricated type
64S&F 100 mm size extruded aluminium alloy handle, fabricated type
65S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete .
66S&F 150mm long aluminum anodised barrel tower bolt of extruded section
67S&F aluminium anodised barrel tower bolts of extruded section 200mm size etc.
68S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed.
69S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
70S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
71S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm, complete, all as specified and directed.
72All as per item No 71 above but without drainage board and over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm.
73S&F in repair PVC SWR pipe 110 mm dia single socketed in any length, laid in tenches etc, complete, all as specified and directed.
74S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc, complete, all as specified and directed.
75S&F 30mm thick factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings, complete all as specified and directed
76Taking down carefully surface aluminium or copper point wiring on TW Batten/in conduit/ with PVC casing-caping/conduit (light, fan, socket, or power) complete and making good the disturbed surface of wall/celling etc including taking down fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and removing material from site and taking credit as per schedule of credit complete all as specified.
77M & L for concealed Point wiring complete with 1.5 Sqmm (nominal area) 1100 volts grade single core PVC insulated FR-LS multistranded copper conductor cable in and including medium grade duty PVC conduit not less than 20 mm including fitting & accessories, with modular metal flush box with white cover plate and frame and dummy plate as per required modular plate at site for mounting switch, socket etc for one light/fan/bell point controled by one switch and (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm. stranded copper conductor with green FRLS PVC insulating earth common earth dolly, complete all as specified & directed.
78All as per Serial item No. 77 above but One socket outlet 6 Amp controlled by one switch on the same board with other switches
79All as per Serial item No. 77 above but One socket outlet 6 amp controlled by one switch on indepdendent board .
80M & L for Point wiring with 1100 volts grade single core PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and with modular metal flush box with white cover plate and frame and dummy plate as per required modular plate at site one 16 amp socket outlet controlled by one switch on independent board complete.
81S & F Modular switch 1 way 6A, 1 module
82S & F Modular switch 1 way 16A, 1 module
83S & F modular socket, 6A - 2/3 pin combined 2 module
84S & F modular socket 6A/16A-2/3 pin combined 2 module
85S&F lamp holder, PVC/ polycarbonate type complete and including taking down unserviceable lamp holder of any description complect, as specified & directed.
86S&F LED lights fitting 1 x 20 W, 220 V LED batten type with aluminium housing tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complect, as specified & directed.
87S & F ceiling rose 65x50mm 3 terminals polycarbonate body complect, as specified & directed.
88S&F x modular fan step regulator, 120W-2 module
89S&F MCB, DB, SPN ,8 way double door IP 43 complete prewired including Bus Bar with earth bar and neutral bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed .
90S&F sheet steel metal enclosure (DB) triple pole and neutral 4 way Double Door 415 V, with 200 amps rated bus bar complete all as specified and directed.
91S&F MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'B' curve.complete all as specified & directed.
92S&F MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'B' curve, complete, all as specified & directed.
93Supply and fixing 415 V , 10 KA 'C' curve miniature circuit breaker (MCB's) of capacity 63 Amps TPN. complete all as specified & directed.
94S&F LED light fitting 1X10W bulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size, complete, all as specified .
95M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase )concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in and including PVC rigid non metallic medium grade conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length)
96M& L for painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc compete all as specified and directed .
97M&L for Earthing complete with galvanised steel earth plate electrode 60x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on complection., earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate with 1 nos MS handles of 8mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.
98S&F post top lantern LED type 20 Watt 230 Volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp, complect, as specified & directed.
99S&F LED luminaire 600mmx600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, as specified & directed. .
100Supply ,laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 25 sq mm 4 core, complete, all as specified & directed...
101Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of GI pipe etc not exceeding 10 sqm on plan and getting out in Soft/loose of soil, complete, all as specified & directed..
102Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil, all as specified & directed.
103Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soft /loose soil, all as specified & directed.
104M&L for sand cushioning to under ground cable using sand and gently punning to cushioning to cable complete all as specified & directed.
105Supply and laying common burnt clay building brick Sub class B designation 75, as protection cover of cables, complete all as specified and directed.
106S&F repair 40 mm bore GI tubing with fittings \\"light garde \\"in treches or on pole for protection of cables complete all as specified & directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628766
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24.51 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Of Bldg No T-117 (A Mess) At Me Line Of 223 Abod At Surnussi Under Age (I) Surnussi
Basic Detail
Tender No 8326/44/E8
Bidding Type Tender
Location
City Jalandhar
State Punjab
Key Dates
Publish Date 19 Nov 2026
Submission Date 10 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 24.51 Lakhs
Tender Fee 500
EMD 49100
Exemption Available
Document List
17a1e61a-3dad-4b91-b4fa-fb5577c95376.html
BOQ_896926.xls
Tender44.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

17a1e61a-3dad-4b91-b4fa-fb5577c95376.html

xls

BOQ_896926.xls

pdf

Tender44.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender