Tender For Addn/Altn Of Approx 750 Mtr Boundary Wall With Y Type Of Fence At Rwa Somnath Enclave Under Ge(West) Ferozepur Cantt
Tender Value
38.74 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
17 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn Of Approx 750 Mtr Boundary Wall With Y Type Of Fence At Rwa Somnath Enclave Under Ge(West) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed. |
| 2 | Cement concrete (1:4:8) type D2 40mm graded agg in foundations, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for formwork to sides of pillars, posts, struts, piers, band and foundation columns and stanchions Square, rectangular surfaces of concrete complete all as specified and directed |
| 4 | Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed. |
| 5 | M & L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 6 | Ditto all as per ser item No 5 above but except bricks complete all as specified and directed. |
| 7 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in lintels Cills,Steps, Plinth courses, Railings, Copings, Bed plates , kerbs etc.inlcuding weathering slightly rounded or champfered angles and throating etc.complete all as specified and directed. |
| 8 | Taking down cement plaster on brick work of any description incl racking out joints and cleaning dust etc including removing rubbish material complete all as specified and directed. |
| 9 | M & L rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed. |
| 10 | Preparation of new plastered surfaces and applying two coats of cement base paint over a coat chalk white primer complete all as specified and directed. |
| 11 | Supply and fix MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 12 | S &Fixing Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type ofstandard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wre, staples or steel pins . etc complete all as specified and directed. (each line wire to be measured) |
| 13 | M &L Broken glass coping on top of wall in cement mortar1:3 complete all as specified and directed. |
| 14 | S&F anti-rust concertina coil (reinforced punched barbed tape single layer) for fencing work complete all as per following specifications :- (i) Diameter of concertina coil - 600mm dia (before stretch) (ii) Number of turns in concertina - 50 turns (iii) Weight of each coil - 10.5 KG (iv) Coverage per coil - 8 m (v) Centeral core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm. (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19mm (before wrapping on centeral core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of baarbs 25.4mm + 0.2 mm (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire. 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - minimum 125 for each coil. (ix) Handle and spikes to be pronided as required complete all as specified and directed |
| 15 | Returning, filling in, including spreading, leveling, watering and well ramming soft/loose soil in layers n. exc 25 cm thickness complete all as specified and directed. |
| 16 | Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and directed. |
| 17 | M&L for preparation of new steel surafces of any description not otherwise described , over 10 cm width or girth , priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel paint of approved shade complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender