Defence Statutory Bodies & Commissions/Committees Closing in 22 days TDR #58628763

Tender For Repair / Maintenance Of Road Furniture And Allied Misc B/R Work In Domestic Area At Air Force Station Utarlai

Issued by Statutory Bodies & Commissions/Committees · Barmer, Rajasthan
Tender Value
10 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
22 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair / Maintenance Of Road Furniture And Allied Misc B/R Work In Domestic Area At Air Force Station Utarlai

BOQ

Name of Work:- REPAIR / MAINT OF ROAD FURNITURE AND ALLIED MISC B/R WORK IN DOMESTIC AREA AT AIR FORCE STATION UTARLAI
Sl. No. Item Description
1S&F in repair solar road studs made out of aluminium housing and precast construction solar powered by SEIMENS monocrystal solar panel 2W 120mA type of battery NI-CD 1.2 volt 2500m AH & flash rate 2Hz or 70Hz view distance over 300mtr. Fitted with 2Hz EL-805-3 pieces each side on two ends total 6 pieces LEDs, flashing upto 12 Hrs of light at night and solar battery automatically charged in day/ sun light duly fixed with cement and hardener. 125 x 125 x 25mm in red /yellow colours complete all as specified and directed.
2S&F in repairs road studs GB733 (B) (100X100X 19mm) made of ABS materials two reflectors are fitted in body. The road stud is dynamically designed so that it can bear load up to 25 Tons and its impact strength is about 253 KN weight of stud is 130 gms. Approx body available in Red/White/ Yellow colour available with swareflex beads also. complete all as specified and directed.
3S&F in repair retro reflective road delineator made of ABS plastic body having two 100 mm dia circular reflectors & two rectangular reflectors of 70mm x 23 mm fixed on both sides of 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 20cm x 20cm x 20cm complete all as specified and directed.Note :- Reflector shell be covered with 4mm dia galvanised wire of mesh size 100 x150mm .
4S&F in repair solar flasher pole mounting with protective cover road delineator made of ABS plastic body having circular solar flasher fixed on 1000 mm long MS pipe 50mm dia fully powder coated guide post to fixed with screws/embeded in concrete PCC 1:2:4 type B-2 using 40mm graded crusted stone aggregate having soze 20cmx20cmx20cm complete all as specified and directed.Note:- Solar flesher shall be covered with 4mm dia galvanised wire of mesh size 100x150mm.
5S&F in repairs speed bumps made from heavy duty ABS high resistance wear & tear property UV stabilized black & yellow combination high reflective reflector having available on both sides in red & yellow colour with L= 500mm, W=380mm, H=50mm including PCC work of back side of speed bumps complete all as specified and directed.
6Supply and fixing in repair Road Safety Convex Mirror 100 cm dia Model No OS-789 of make Oscar or equivalent make as mentioned in Appx 'B' including stand/padestal embedded /fixed in to concrete PCC 1:2:4 type B-2 usuing 40 mm graded crusted stone aggregate having size 45x45x60cm and necessary earth work.,complete all as specified and directed by Engr-in-Charge.
7Dismantling of old / brocken cautionary mandatory and information sign boards of any size, any position and any description including frame work embedded in ground or PCC, complete as as specified.
8Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
9M&L for providing cement concrete in foundation filling and mass concrete 1:2:4, type B2 (using 40mm graded aggregare), complete all as specified and directed.
10Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, work such as cautionary mandatory and information sign boards and similar work channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
11S&F retro reflective cautionary mandatory and information sign boards as per IRC 67 made of high intensity reflective grade sheeting fixed over ACP sheet 5mm thick, including writing letters(computerized cutting) in any nos and any size with reflective micro prismatic tape in any colour shade incl making arrow/sign, border and logs,complete all as specified and directed.Note: The rate of 5mm thick ACP sheet shall be included in this item.
12S&F Framed work such as cautionary mandatory and information sign boards, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel anging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and similar work structural steel con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
13M&L for preparation of old steel surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint , complete all as specified and directed
14M&L for preparation of new steel surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , complete all as specified and directed
15M&l for applying one coat of synthetic enamel paint incl preparation of old concrete surface complete all as specified and directed
16Demolition of cement concrete of any description and in any position not otherwise specifically provided as in floor / pavings and removing the same upto 1.00 KM or outside MD land complete all as specified and directed.
17M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor.
18M&L for heavy duty parking tiles of size 300x300mm and 10mm thick in any shade as in parking tiles, floor, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM (1:4) set and jointed in neat cement slurry and pointed white or coloured cement to match complete all as specified and directed.
19M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor finishes and pavings/
20M&L for forming contraction (dummy) joint 65mm deep and 10mm wide and filled with sealing compound grade 'B' all as specified complete all as specified and directed.
21M&L for rubber moulded coloured chequrred cement concrete tiles with grey cement and pigment 20cm x 20cm x 20mm thick, set and jointed in neat cement slurry and pointed in white or colour cement and match the surface of tiles as in floor laid over and including 15mm thick screed bed in CM 1:6 complete including dismantling of old u/s tiles and rubbish off the premises complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628763
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 10 Lakhs
LAST DATE 12-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Maintenance Of Road Furniture And Allied Misc B/R Work In Domestic Area At Air Force Station Utarlai
Basic Detail
Tender No 8172/E8
Bidding Type Tender
Location
City Barmer
State Rajasthan
Key Dates
Publish Date 19 Nov 2026
Submission Date 12 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 10 Lakhs
Tender Fee 500
EMD 20000
Exemption Available
Document List
BOQ_896964.xls
e9427f6c-e720-45e2-bbd5-f24df7d2bbe4.html
TD_Road.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896964.xls

html

e9427f6c-e720-45e2-bbd5-f24df7d2bbe4.html

pdf

TD_Road.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender