Defence Statutory Bodies & Commissions/Committees Closing in 25 days TDR #58628751

Tender For Special Repairs To Drain And Road From Factory Gate To Uran Workshop At Nad Karanja

Issued by Statutory Bodies & Commissions/Committees · Raigad, Maharashtra
Tender Value
89.24 Lakhs
Estimated cost
Bid Submission
17 Dec 2026
25 days left
EMD
1.59 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Drain And Road From Factory Gate To Uran Workshop At Nad Karanja

BOQ

Name of Work:- Special Repairs to Drain and Road from Factory Gate to Uran Workshop at NAD Karanja
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK: Special Repairs to Drain and Road from Factory Gate to Uran Workshop at NAD Karanja CONTRACT AGREEMENT: CWE KJ(K)- OF 2026 - 2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words)
2Scarifying or picking gravelled macadam or bituminous macadam surfaces by power or hand picking to a depth exceeding 50mm and not exc 100mm and area not exceeding 400 Sqm in one stretch including racking over and grading the broken up surfaces to proper camber etc as required including screening removal of servicable / un-servicable agreegate to a distance not exceeding 50m and stacking the serviceable aggregate complete all as specified as directed.
3M&L for 7.50 cm thick (compacted thickness) WBM with coarse agreegate of grading 2 (63 to 40mm size), spread rolled and consolidated with 08 to 10 ton power road roller to required gradient and camber complete all as specified and as directed. (Type of aggregate : Granite,trap or basalt)
4ditto - all as per Sl item No. 2 herein before but except material.(Note : Serviceable material obtained from sl item No.1 shall be reused)
5M&L for preparing unsurfaced Water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags removal of all loose dirt etc and applying evenly priming/tack coat with bituminous primer @ 10kg/10sqm (using paving bitumen) all as specified and as directed.
6M&L for premix bituminous macadam, 75mm or less consolidated thickness by using paving bitumen VG-30 grade with binder content @ 4% by weight of total mix, laying with mechanical paver, rolled and compacted to required camber and gradient by using 8 to 10 tonne capacity power roller complete all as specified and directed.
7M&L Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre
8M&L for bituminous semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix of paving bitumen VG-30, rolled and compacted to required camber and gradient, mixing is carried out in computarized automatic hot mix plant laying and spreading by mechanical paver and rolled with 8 to 10 tonne power Vibromax/Tandam road roller to required level, gradient, camber and super elevation, complete all as specified and directed by the Engr -in -charge.Note : (i) The work shall be carried out by usinng sensor paver only.(ii) The mix design shall be got done from approved lab and got approved from GE before commencement of work.
9M&L for 2.5 mm thick painting centre lines, stop lines, dashes, arrows letters etc on roads, pavement and like by applying reflective thermoplastic paint in white/ yellow colour pattern as specifgied strips confirming to BS:3262 (5Kg/Sqm) with glass beads potters (250 gms) and 10 cm/15 cm wide strips on bituminous road surface and road marking (by Hot Mechanical process with Road Marking Machine) including complete removal of dust particle by wire brushes or sweeping with brooms complete all as specified and directed by Engineer-in- Charge.
10Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out
11M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
12M&L for Cement concrete type D2 (1:4:8) in foundations, filling and mass concrete
13Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;
14Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
15M&L for Pre-cast cement concrete block masonry (PCC 1:3:6 type B1 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete
16M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces with two coats i.e (10 mm thick backing coat and 5 mm thick finishing coat) finished even and smooth complete all as specified and directed.
17M&L for Cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in surface channels and drains
18Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped endsetc. ®
19Providing, cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
20Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard dense soil
21Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard dense soil
22Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
23M&L for 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars
24M&L for Concrete bed to drain pipes of dia 450 mm including packing under and completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:3:6 type C-2 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58628751
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 89.24 Lakhs
LAST DATE 17-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Drain And Road From Factory Gate To Uran Workshop At Nad Karanja
Basic Detail
Tender No 84619-K/E8
Bidding Type Tender
Location
City Raigad
State Maharashtra
Key Dates
Publish Date 19 Nov 2026
Submission Date 17 Dec 2026
Open Date 19 Dec 2026
Finance
Tender Value 89.24 Lakhs
Tender Fee 1000
EMD 1.59 Lakhs
Exemption Not Available
Document List
b2e72108-b66a-4834-959b-629f7d6768ba.html
BOQ_896972.xls
soc619.pdf
tender619.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 25 days
Dec 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
html

b2e72108-b66a-4834-959b-629f7d6768ba.html

xls

BOQ_896972.xls

pdf

soc619.pdf

pdf

tender619.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender