Tender For Provn Of Certain Works At Tech Flt And Provn Of Washrooms For Lady Friskers At Gate Af Stn Bareilly Under Ge(Af) Bareilly
Tender Value
24.42 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
18 days left
EMD
48840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Works At Tech Flt And Provn Of Washrooms For Lady Friskers At Gate Af Stn Bareilly Under Ge(Af) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil not exc 1.50 mtr wide and 1.50 mtr in depth for foundation etc or for shafts, wells, cesspits , manholes, pierholes etc not exc. 10 Sqm on plan and getting out all as specified . |
| 2 | M&L for cement concrete type D-2, mix 1:4:8 using 40 mm graded stone aggregate as in foundation, filling and mass concrete ,sub base floor etc all as specified. |
| 3 | M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 all as specified. |
| 4 | Returning, filling in including spreading, levelling ,watering and well ramming in layer not. exc 25 cm thick all as specified. |
| 5 | M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical surface (area of the sub structure in contact with back fill to be measured) all as specified. |
| 6 | M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface all as specified . |
| 7 | M & L for treating the soil under plinth protection at the rate of 5 litres emulsion per sqm of surface area all as specified. |
| 8 | M & L for treating the soil alongwith external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter of wall all as specified . |
| 9 | M&L for reinforced cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing ourses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs including weathering, slightly rounded or chamfered angles and throating all as specified. |
| 10 | M&L for reinforced cement concrete type B-1, 1:2:4 mix (20 mm graded stone aggregate) as in chajja all as specified. |
| 11 | M&L for formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete all as specified |
| 12 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, looking ends and binding with mild steel wire not less than 0.9 mm dia all as specified . |
| 13 | All as per item No. 12.00 abvoe but for 8 mm dia and over up to and including 10mm dia as in stirrups, spaces and binder all as specified. |
| 14 | M&L for reinforced cement concrete type A-1, mix 1:1.5:3 (20 mm graded crushed stone aggregate) as slab supported on walls, beams and columns in floors etc, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified. |
| 15 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surface including finishing surface fair and even including mixed with liquid WPC as per manufacturer's instruction. Note:- WPC will be measured and paid separately). |
| 16 | M&L for rendering 10 mm thick in cement mortar 1:6 on fair face of brick or concrete surfaces including finishing surface even & smooth without using extra cement. |
| 17 | Supply only liquid water proofing compound. |
| 18 | M&L for 5 mm thick rendering in cement concrete (1:3) on surfaces of ceiling including finishing surface even & smooth without using extra cement. |
| 19 | M&L for spreading and leveling in layers not exc. 25cm thick, well ramming including watering all as specified. |
| 20 | M&L for hardcore of broken stone or boulder gauge not exc. 63 mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface all as specified. |
| 21 | M&L for 100mm thick cement concrete type D-2, mix 1:4:8 (40mm graded stone aggregate) as in sub base to floor all as specified. |
| 22 | M & L for 25 mm thick cement concrete 1:2:4, type B-1 (using 20 mm grade stone aggregate) as in sub base all as specified. |
| 23 | S&F for non skid / Anti skid coloured ceramic tiles first quality of size 400mm x 400mm x 7 to 8 mm thick as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed in cement 1:6 all as specified . |
| 24 | M&L for 10 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces for tiling work all as specified. |
| 25 | S&F for glazed ceramic coloured/printed tile first quality of size 900mm X 600mm x 8 to 10 mm thick as in vertical surface such as wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the tile. |
| 26 | S&F for powder coated anodised aluminium frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing all as specified. |
| 27 | S&F for powder coated anodised aluminium as in window, ventilator shutters and side/top hung type without sash bars, aluminium sections weighing 0.55 kg/mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos.) suitable handle (1 No.) etc all as specified. |
| 28 | S&F for 5.50 mm thick sheet glass in square in each pane all as specified. |
| 29 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 30 | S&F for solid PVC door frame of size 50 mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube in opening all as specified . |
| 31 | S&F for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed togeather with solvent cement in the frame at site as per specification & drawing all as specified. |
| 32 | S&F for 100mm long mild steel butt hinge, cold rolled, medium type and fixed all as specified. |
| 33 | S&F for alumimnium handles, cast type anodised of size 100 mm all as specified. |
| 34 | S&F for sliding door bolt 300 mm long aluminium alloy, odised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 35 | S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified. |
| 36 | S & F for vitreous china wash basin, white, flat back of size 630mm x 450mm first quality excluding taps,waste, chain and plug and porcelain stopper but including brackets all as specified. |
| 37 | S & F for chromium plated soap dish fixed to plugs with chromium plated brass screw all as specified. |
| 38 | S&F for vitreous china orrisa pattern squatting pan of size of 630 mmx 450 mm, white with integral foot rests excluding flushing cistern and flush pipe all as specified. |
| 39 | S & F for PVC low level flushing cistern, white of 10 litres capacity, valve less, with inlet, ball valve, float and handle including brackets, PVC flush bend pipe all as specified. |
| 40 | S&F for vitreous china premium / first quality wash down water closet wall hung (EWC) white closed pattern including all necessary accessories like rag bolts/ gel gasket etc.including flushing cistern & flush pipe including white plastic seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified. |
| 41 | S & F for chromium plated health faucet with hand shower & flexible cord suitable for EWC including fixing to steel pipe or union of 15 mm bore dia, health faucet with 8 mm dia 1.2 mtr long flexible tube & wall hook all as specified. |
| 42 | S & F for 15mm dia stop valve/angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated all as specified. |
| 43 | S & F for PVC connection 15mm dia and 45 cm long with two nuts and washers all as specified. |
| 44 | S & F for 15 mm bib tap, chromium plated with fancy types long body with screwed down, screwed for iron pipe of 15mm bore all as specified. |
| 45 | S & F for 15 mm bore chromium plated pillar tap, cast copper alloy, with captan head screwed down high pressure with or with out lettred Hot or Cold with long screwed shanks swan neck and fly nut screwed for iron pipe or for brass ferrule all as specified. |
| 46 | S&F for chromium plated greating 125 mm dia with or without hole to match the colour of floor tile all as specified (min wt 40 gms). |
| 47 | S&F for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long all as specified. |
| 48 | S&F for 900X450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers all as specified. |
| 49 | S&F for tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated fixed to walls all as specified. |
| 50 | S&F for rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified. |
| 51 | S&F for PVC ball cock, 20 mm bore, high pressure of PTMT appoxy coating aluminium rod , with polythene float and flynut complete, screwed for iron pipe all as specified (Min wt 210gm). |
| 52 | S&F for 20mm dia half turn or gate valve with iron wheel head, screwd both end for iron pipe and fixed all as specified. |
| 53 | S&F for PVC (SWR) floor trap long neck type of 75 mm dia without greating including jointing to waste pipe fixed in cement all as specified. |
| 54 | S&F for 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed to wall all as specified. |
| 55 | S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches , floors or fixed to wall all as specified. |
| 56 | S&F for 110 mm bore PVC (SWR) junction single (single T) equal or unequal all as specified. |
| 57 | S&F for 75 mm bore PVC (SWR) bends (any radius), diminishing piece or taper (larger bore measured) all as specified. |
| 58 | S&F for 110mm bore PVC (SWR) vent cowl all as specified. |
| 59 | S&F for stack clamps for 110 mm bore pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof including painting all as specified. |
| 60 | M&L for 20 mm dia GI tubing, 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floors all as specified. |
| 61 | M&L for 15 mm dia GI tubing, 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floors all as specified. |
| 62 | M&L for 75 mm thick cement concrete type C-1, mix 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, laid in bay not exc 3.00 sqm each finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering and providing 6 mm wide joints throughout the thickness of plinth protection duly filled with bitumen mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) all as specified. |
| 63 | M&L for preparation of newly plastered surfaces in ceiling and applying two coats of oil bound distemper over a coat of primer over 1mm thick wall care putty all as specified. |
| 64 | M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer over 1mm thick wall care putty all as specified. |
| 65 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 1mm thick wall care putty all as specified. |
| 66 | M & L for APP based polymeric membrane minimum weighing 3kgs/sqm and minimum thickness 3mm reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on bitumen prime surface @0.30 ltr/ Sqm by forced application all as specified. |
| 67 | M&L for preparation of surfaces and applying two coats of aluminium reflective paint on exposed APP modified bitunous membrane on roof all as specified. |
| 68 | M&L for 150 mm bore reinforced concrete pipe, class NP-3, laid and jointed with collars in trenches in cement mortar 1:1 with spun yarn all as specified. |
| 69 | M&L for concrete bed 1:4:8,type D-2 using 40 mm graded stone aggregate to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe all as specified. |
| 70 | M & L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore pipe all as specified. |
| 71 | M & L for factory made chequered Endura tile of size 30cm x 30cm x 25mm thick as in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over 20mm thick screed bed in cement mortar 1:6 all as specified. |
| 72 | M&L for precast cement concrete type B-1 ,1:2:4 mix (20 mm graded stone aggregate) and set in cement mortar in 1:4 as in landing, cover slab, manhole cover slab,chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified. |
| 73 | Removing excavated material (soil) to a distance exc 250 meter but not exc 500 meters, depositing where directed at a level not exc 1.5 mtr above from the starting point and deposited where directed all as specified. |
| 74 | Surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified. |
| 75 | M&L for 10 mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness for interlocking block all as specified. |
| 76 | M&L for factory made machine pressed, precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness and M-40 grade concerete with grey cement and pigment all as specified. |
| 77 | M&L for cement concrete type B-1, 1:2:4 mix (20 mm graded stone aggregate) in kerbs or mud stops, rounded or chamfered on edge all as specified. |
| 78 | M&L for preparation of newly plastered surface and applying three coats of white wash on wall all as specified. |
| 79 | M&L for excavation in post holes (or similar holes) each not exc 0.5 cum getting out returing, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm all as specified. |
| 80 | S&F for structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St.-240. (Note :- All structural member including tubular truss should be mechanically curved shape all as specified). |
| 81 | M&L for mild steel plate girder or single stanchions built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and conforming to Fe- 410W (grade-E-250) quality 'A' all as specified. |
| 82 | S&F for pre-painted galvalume aluminum zink coating GI based corrugated steel sheet machanically curved 0.50 mm thick trapezodial pattern of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and fixed with self tapping screws all as specified. (Note:- Colour and design as approved by GE ) |
| 83 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as of any colour having tensile strength of 550 Mpa as in ridge hips,valley gutter, drip and straight flashing (length and girth as fixed) self tapping screws all as specified. |
| 84 | M&L for preparation of newly steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer all as specified. |
| 85 | M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.50 Sqmm (nominal area) with two single core PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through and including heavy duty PVC concealed conduit including all accessories after chasing cutting in wall /ceiling etc with provision for suitable modular boxes and modular cover plate with frame and modular white cover plate with suitable for modular switches etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for one light point controlled by one way switch all as specified. |
| 86 | All as per item No 85.00 above but for one fan point controlled by one way switch. |
| 87 | M&L for sub main wiring with 1100 volts grade heavy duty two single core 4 Sqmm (nominal size) PVC insulated FRLSH copper multi-stranded conductor cable drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chasing, cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm (nominal size) stranded copper conductor PVC insulated (FRLSH) (green colour) cable as earth wire complete all as specified. (NOTE: TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH). |
| 88 | S&F for wall/surface mounted type LED light fitting batten type with LED 1x 20 Watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified. |
| 89 | S&F for wall / surface mounted type LED light fitting batten type with LED 10 Watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable all as specified. |
| 90 | S&F for air ventilating fan 300 mm sweep PVC body, AC, single phase, 230 volts, 1200 RPM and making holes with lovoured shutters including mounting frame and connecting the fan to ceiling rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5 mtr long to connection all as specified. |
| 91 | S&F for modular switch, flush type, single pole, one way 6 Amp 1module 230 volts all as specified. |
| 92 | S&F for ceiling rose 65mm x 50mm three terminals all as specified. |
| 93 | S&F for flush mounting factory made VTPN DBs-DPX-160 MCCB DB's, IP-43 protection-IK09 with metal door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 Amp MCCB as incomer and 12 Nos. MCB, SP 6 to 32 Amp as outgoing complete all as specified. |
| 94 | S&F for MCCB 125 Amp, 415 volts, 4 pole, thermal magnetic release for line protection all as specified. |
| 95 | S&F for flush mounting factory made Ekinoxe SPN DB's double door, IP-43 Protection, IK-09 with metal door, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar 4 way with 100 Amps rated bus bar all as specified. |
| 96 | S&F for MCB, SPN (single pole and neutral), 240 volts, 40 Amps breaking capacity 10 KA, ‘C’ Series all as specified. |
| 97 | S&F for MCB, SP (single pole) 240 volts, 6 to 32 Amps, 50Hz, 10 KA, ‘C’ series all as specified. |
| 98 | S&F for 25 mm bore galvanised steel tubes, medium grade including all fittings and laid in trenches all as specified. |
| 99 | S&F for gun metal globe or gate valve ISI marked with iron wheel head, screwed both ends for iron pipe of 25 mm bore all as specified. |
| 100 | S&F for gun metal globe or gate valve ISI marked with iron wheel head, screwed both ends for iron pipe of 20 mm bore all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender