Tender For Periodical Services Cum Welcome Maintenance Of (Married And Otm Accn) And Misc B/R Repairs Work At Cqa (A), Nai And Sqae Under Ge (Central) Khadki.
Tender Value
49 Lakhs
Estimated cost
Bid Submission
11 Dec 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services Cum Welcome Maintenance Of (Married And Otm Accn) And Misc B/R Repairs Work At Cqa (A), Nai And Sqae Under Ge (Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | NOTE FOR ALL PAINITNG ITEMS :-The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.(ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (d) Safety head gear, gloves, apron, shoes and safety glasses should be wear while carrying out the painting works.(e) The scafolding shall be having ease of access for inspection purpose. |
| 2 | Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto any height etc all as specified and as directed. |
| 3 | Material and labour for complete removal of existing treatement/old plastered/concrete surface of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto any height including 1mm thick birla white putty including necessary scaffolding etc all as specified and as directed. |
| 4 | Material and labour for preparing old surfaces plastered or unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed. |
| 5 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall finishing even & smooth without using extra cement and similar like inlcuding racking out joints hacking for key scrubbing down with water etc upto 10mtr height including necessary scaffolding , ladder & formwork complete all as specified and as directed. |
| 6 | Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and as directed. |
| 7 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall finishing even & smooth without using extra cement and similar like inlcuding racking out joints hacking for key scrubbing down with water etc upto 12mtr height including necessary scaffolding , ladder & formwork complete all as specified and as directed. |
| 8 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint over Priming plastered and other surfaces with alkaliresistant priming paint upto height 12m including necessary scaffolding ladder etc complete all as specified and as directed. |
| 9 | Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 10 | Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 11 | Material and labour for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 12 mtr including necessary scaffolding etc complete all as specified and as directed. |
| 12 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specified and as directed. |
| 13 | Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed. |
| 14 | Material and labour for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile n. exc 0.36 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 15 | Description all as per Ser item No 14 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land |
| 16 | Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 17 | Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 18 | Demolition of Stone slabs and tiles laid beded and pointed in any mortar of any description or thickness in floors, aprons etc. all as specified and as directed. |
| 19 | Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 20 | Material and labour for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 21 | Material and labour for Granite 18-20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 22 | Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 23 | Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 24 | Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed. |
| 25 | Supply and fix in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 12 mtr etc complete all as specified and as directed. |
| 26 | Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced. |
| 27 | Supply and fix in repair PVC floor trap/Nahani trap 75mm complete all as specified and as directed. |
| 28 | Supply and fix in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. |
| 29 | Material and labour for disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply beneath the tank in following laid down process all as specified and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed. |
| 30 | Material and labour for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply beneth the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed. |
| 31 | Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed. |
| 32 | Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specified and as directed. |
| 33 | Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed. |
| 34 | Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets all as specified and as directed. . |
| 35 | Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed. |
| 36 | Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed. |
| 37 | Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed. |
| 38 | Supply and fix in repairs wall Mixer chromium plated Hot and cold with copper pipe complete all as specified and as directed. |
| 39 | Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed. |
| 40 | Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed. |
| 41 | Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specified and as directed. |
| 42 | Supply and fix in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. |
| 43 | Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 44 | Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed. |
| 45 | Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed. |
| 46 | Supply and fix in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed. |
| 47 | Supply and fix in repair Sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed. |
| 48 | Supply and fix in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 49 | Supply and fix in repair for PVC bathroom cabinet mirror 600x450mm including all necessary arrangement and fitting complete all as specified and as directed. |
| 50 | Supply and fix in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and as directed. |
| 51 | Supply and fix in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed. |
| 52 | Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 53 | Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed. |
| 54 | Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed. |
| 55 | Supply and fix for 35mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, both faces is covered with decorative face veneer with lipping/frame to match and chemically treated against termite infestation, complete all as specified and as directed. |
| 56 | Supply and fixfor 30mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed. |
| 57 | Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 58 | Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed. |
| 59 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed. |
| 60 | Supply and fixaluminium powder coated window sliding type (3 track) with frame size 92x31.75x1.2mm thick and shutter frame size 40x18x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 5mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed. |
| 61 | Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed. |
| 62 | Supply and fix butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed. |
| 63 | Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 64 | Supply and fix Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed. |
| 65 | Supply and fix extruded aluminium alloy handles 150mm long in size , fabricated type,anodised complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender